Tender For Repair / Renovation Of Cfc Rajouri Kadal, Srinagar
Tender Value
44.98 Lakhs
Estimated cost
Bid Submission
09 Nov 2026
8 days left
EMD
89980
Bank guarantee accepted
Document Fee
5000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Srinagar → Jammu and Kashmir
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Repair / Renovation Of Cfc Rajouri Kadal, Srinagar
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling W.C. Pan of all sizes including disposal of dismantled materials i/c malba all complete as per directions of Engineer-in-Charge. |
| 2 | Dismantling tile work in floors, walls and roofs laid in cement mortar includingstacking material within 50 meters lead.For thickness of tiles 10 mm to 25 mm |
| 3 | Dismantling old plaster or skirting, raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 meters lead. |
| 4 | Repairs to plaster of thickness 12mm to 20 mm in patches of area 2.5 sq.meters and under, including cutting the patch in proper shape raking out joints and preparing and plastering the surface of the walls complete including disposal of rubbish to the dumping ground within 50 meters lead14.1.1 With cement mortar 1:4 (1 cement : 4 fine sand) |
| 5 | 12mm Cement plaster of mix: 1 : 4 ( 1 cement : 4 fine sand) |
| 6 | Finishing walls with acrylic smooth exterior paint of required shade on New work (Two or more coats applied @ 1.67 liter/10sqm over and including priming coat of exterior primer applied @ 2.20kg/10sqm) |
| 7 | Providing and applying Plaster of Paris putty of 2mm thickness over plastered surface to prepare the surface even and smooth complete |
| 8 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade.Two or more coats on new work |
| 9 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make, in all colours and shades,laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. completeSize of tile 500x500 mm |
| 10 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer- in-Charge, in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. |
| 11 | Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 liter low level white P.V.C. flushing cistern, including flush pipe with manually controlled device (handle lever), conforming to IS:7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: W.C. pan with ISI marked white solid plastic seat and lid.(HINDWARE/JAQUAR/CERA/PARYWARE or equivalent brand) |
| 12 | Providing and fixing water closet squatting pan (Indian type W.C. pan) with 100 mm sand cast Iron P or S trap, 10 liter low level white P.V.C flushing cistern, including flush pipe (of approved make) with manually controlled device (handle lever) conforming to IS: 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required. White vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests.(HINDWARE/JAQUAR/CERA/PARYWARE or equivalent brand) |
| 13 | Providing and fixing wash basin with C.I. brackets, 15mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required : White Vitreous China Wash basin size 630x450 mm with a basin mixer (HINDWARE/JAQUAR/CERA/PARYWARE or equivalent brand) |
| 14 | Providing and fixing/ installlation of 50 ltr capacity Horizontal/Vertical geyser of approved quality including all necessary fittings, wiring with 16 Amp socket and switch etc, complete in all respects (JAQUAR/HINDWARE/RACOLD/VENUS/AO SMITH or equivalent brand) (L.M.R) |
| 15 | Providing and fixing C.P. soap dish of approved quality and size (L.M.R)(HINDWARE/JAQUAR/CERA/PARYWARE or equivalent brand) |
| 16 | Providing and fixing 600x120x5mm glass shelf with edges round off supported on anodized aluminum angle frame with C.P. brass brackets and guard rail complete fixed with 40 mm long screws, rawl plugs, etc.complete |
| 17 | Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. |
| 18 | Providing and fixing of Towel rail C.P. brass of approved quality and size together with a pair of C.P. brass brackets to fit the size of towel rail (L.M.R)(HINDWARE/JAQUAR/CERA/PARYWARE or equivalent brand) |
| 19 | Providing and fixing Towel rail C.P. brass towel ring rail or toilet paper holders of approved quality and size(HINDWARE/JAQUAR/CERA/PARYWARE or equivalent brand) |
| 20 | Providing and fixing health faucets of approved quality (HINDWARE/JAQUAR/CERA/PARYWARE or equivalent brand) |
| 21 | Providing and fixing uplasticized PVC connection pipe with brass unions20 mm nominal bore |
| 22 | Providing and fixing 15 mm nominal bore C.P. brass angle valve for basin mixer and geyser points of approved make conforming to IS : 8931(HINDWARE/JAQUAR/CERA/PARYWARE or equivalent brand) |
| 23 | Providing and fixing 15 mm nominal bore C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms (HINDWARE/JAQUAR/CERA/PARYWARE or equivalent brand) |
| 24 | Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes conforming to IS: 15801, UV stabilized and anti-microbial fusion welded, having thermal stability for hot and cold water supply includingall PP-R plain and brass threaded Polypropylene random fittings. This includes testing of joints complete as per direction of Engineer-incharge.19.2.2 Internal work Concealed fixing the pipe along with all bends with clamps at 1.00 meter spacing including cutting chases and making good the wall etc.PN-16 pipe , 20mm OD(SDR-7.4) |
| 25 | PN-16 pipe , 25mm OD(SDR-7.4) |
| 26 | PN-16 pipe , 32mm OD(SDR-7.4) |
| 27 | Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet150 mm diameter |
| 28 | Providing and fixing CP Brass Single lever telephonic wall mixer of quality & make as approved by Engineer in charge.(a) 15 mm nominal dia |
| 29 | Cutting holes of required size in brick masonry wall for fixing of exhaust fan including providing and fixing 300 mm dia PVC pipe conforming BIS-12818 and making good the same etc. complete as per direction ofEngineer-in-charge. |
| 30 | Providing and fixing of exhaust fans with all necessary fittings,wirings and switches etc, complete job as per directions of Eng-in-charge |
| 31 | Providing, supplying and laying uPVC/SWR sewer pipe of approved quality conforming to relevant IS standard, including rubber ring/socket joints, excavation excluded, testing, jointing, cutting and making good complete as directed by Engineer-in-Charge.75 mm dia pipe |
| 32 | 110 mm dia pipe |
| 33 | 150 mm dia pipe |
| 34 | Earth work in bulk excavation by mechanical means (hydraulic excavator) over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 m2 on plan) including disposal of excavated earth lead upto 50 meters and lift upto 1.5 m, as directed by Engineer-in-Charge.2.7.1 All kinds of soil : |
| 35 | Providing & Laying of stone soling (duly hand packed) including watering dressing and ramming with all carriages loading un-loading and stacking etc complete |
| 36 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) |
| 37 | Providing and laying 60mm thick factory made cement concreteinterlocking paver block of M-30 grade made by block making machine with strong vibratory compaction and of approved size and design/shapelaid in required colour and pattern over and including 50mm thick compacted bed of fine sand, filling the joints with coarse sand etc. all complete as per direction of Engineer-in-charge. |
| 38 | Structural steel work in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. Welded |
| 39 | Providing corrugated G. S. sheet roofing including vertical/curved surface fixed with polymer coated J or L hooks, bolts and nuts 8mm diameter with bitumen and G.I limpet washers or with G.I. limpet washers filled withwhite lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (upto any pitch in horizontal/vertical or curved surface)excluding the cost of purlins, raftersand trusses and including cutting to size and shape wherever required. 0.50 mm thick with zinc coating not less than 275 gram/m |
| 40 | Providing and fixing panelled or panelled and glazed shutters for doors,windows and clerestory windows fixing with butt hinges of required size withnecessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. (Note: -Butt hinges and necessary screws shall be paid separately).First class kail wood |
| 41 | Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick. First Class kail wood |
| 42 | Taking out existing wooden door shutter, repair by cutting, painting etc. and refixing of repaired door shutters to existing door frames, including replacement of hinges with screws, etc. as required, all complete as per the direction of the Engineer-in-charge. |
| 43 | Providing and fixing hardware fittings of approved brand and of required type as approved by Engineer incharge. complete as per the specifications. (Brass)Modular door lock SS finish handle 10\\" with dual locking system inside & outside (godrej) |
| 44 | Tower bolts 150 mm |
| 45 | Tower bolts 100 mm |
| 46 | Handle 125 mm |
| 47 | Handle 100 mm |
| 48 | Hooks 150 mm |
| 49 | L-drops (doors) |
| 50 | Dismantling granite work in floors and roofs laid in cement mortar includingstacking material within 50 meters lead. |
| 51 | Providing and fixing gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations, of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels8.2.2 Granite of any colour or shade (Area of slab over 0.5 sqm) including rounding, chamfering, bull nosing of the edges as directed by Engineer-in-charge 18 mm |
| 52 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflowpipes but without fittings and the base support for tank |
| 53 | Taking out doors, windows and clerestory window shutters (steel or wood) including stacking within 50 meters lead :15.13.1 Of area of 3 sqm. and below |
| 54 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) |
| 55 | Providing and fixing Khatam Bandi ceiling of first-class Budloo/Fir wood, in Panch Murabah pattern, including 12 mm thick commercial plywood, necessary cornice, fixing with required nails/screws and all other incidental works complete, excluding the cost of Budloo/Fir wood frame work, which shall be paid separately, complete as directed by the Engineer-in-Charge. |
| 56 | Providing wood work in frames of false ceiling, partitions etc. sawn and fixed inposition Budloo / Fir wood |
| 57 | Providing & Applying polymer modified, flexible cementatious negative side waterproofing coating with elastic waterproofing polymers on interior wall plaster surface in three coats @14.35 kg /10 sqm. One coatof self priming of cementatious waterproofing polymer(dilution with water in the ratio of 1:1) and two coats of cementatious waterproofing polymer (dilution with water in the ratio of 3:1 ) after scrapping andproperly cleaning the surface to remove pre-existing paint film & loose particles till plaster is visible, complete in all respect as per the direction of Engineer-in-Charge. |
| 58 | Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in6.1.5 Cement mortar 1:6 ( 1 cement : 6 coarse sand) |
| 59 | Extra for brick work with common burnt clay bricks/cement concrete bricks insuperstructure above plinth level upto floor five level |
| 60 | Demolishing brick work manually/by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 meters lead as per direction of Engineer-in-charge: In cement mortar |
| 61 | Demolishing existing septic tank manually/by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 meters lead as per direction of Engineer-in-charge: |
| 62 | Providing, fabricating and fixing ornamental mild steel fencing 1 meter height of approved design and pattern, fabricated from M.S. flats, round/square bars and other steel sections of specified sizes, including cutting, bending, drilling, welding, grinding, making ornamental patterns, frames and posts, fixing in position with necessary clamps, cleats, bolts/fasteners and all incidental works, complete in all respects as directed by the Engineer-in-Charge, including one coat of approved red oxide zinc chromate steel primer and two or more coats of synthetic enamel paint of approved brand and manufacture of required colour to give an even shade, complete. |
| 63 | Providing and fixing ISI marked M.S. pressed butt hinges bright finished withnecessary screws etc. complete :125x65x2.12 mm |
| 64 | Random Rubble masonry with hard stone in foundation and plinth including leveling up with cement concrete 1:6:12 (1 Cement : 6 coarse sand : 12 graded stone aggregate 20mm nominal size) upto plinth level andcuring complete with: Cement mortar 1:6 (1 Cement : 6 coarse sand) Quarry stone |
| 65 | Dry random rubble masonry with hard stone in foundation and plinth: With bond stone. Quarry stone |
| 66 | Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) (Slabs) |
| 67 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth levelThermo-Mechanically Treated bars of grade Fe-500D or more |
| 68 | Centering and shuttering including strutting, propping etc. and removal of form for: Suspended floors, roofs, landings, balconies and access platforms. |
| 69 | Edges of slabs and breaks in floors and walls Under 20 cm wide |
| 70 | Providing and fixing of C.I. cover L.D. Rectangular 455x610mm with frame complete job as per the directions of the Engineer-in-charge (Septic tank and soak pit |
| 71 | Carriage of materials by Mechanical Transport including loading, unloading and stackingSand from Ganderbal average lead 20 km |
| 72 | 20mm aggregate from Athwajan average lead 13 km |
| 73 | 40mm aggregate from Athwajan average lead 13 km |
| 74 | Random rubble stone from Athwajan average lead 15 km |
| 75 | Bricks from Pampore average lead 19 km Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 19, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 09, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 8 daysNov 10, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 9 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender