Tender for Installation & Energisation of 58 NO.(58 no. Packages) new River Lift & Tube Well Lift Irrigation Projects (bkvy-ridf 2026-27) Under Gosani, Kashinagar, Mohana, Gumma, & R.udayagiri Block in Gajapati District (bkvy-ridf) Kantragada-і
Tender Value
18.03 Lakhs
Estimated cost
Bid Submission
31 Oct 2026
9 days left
EMD
18033
Bank guarantee accepted
Document Fee
7080
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Gajapati → Odisha
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Installation & Energisation of 58 NO.(58 no. Packages) new River Lift & Tube Well Lift Irrigation Projects (bkvy-ridf 2026-27) Under Gosani, Kashinagar, Mohana, Gumma, & R.udayagiri Block in Gajapati District (bkvy-ridf) Kantragada-і
BOQ
| Sl. No. | Item Description |
| 1 | Earthwork in excavation of foundation in hard soil including dressing levelling of bed within initial lead of 50mt. lift of 1.5mtr etc complete as per the direction of the Engineer-incharge. |
| 2 | Filling in foundation plinth with sand including watering ramming etc complete as per the direction of the Engineer- incharge. |
| 3 | Cement concrete (1:4:8) with 4cm size h.g.c.b. metal of approved quality from approved quarry with ramming watering and curring etc. complete including cost, taxes, royalty convence charge of all material to worksite, supply of cement TP required etc. complete as per the direction of the Engineer-incharge. |
| 4 | 1st class Kiln Burnt Brick masonry 25cm x 12cm x 8cm size having crushing strength not less than 75kg / cm2 with dimensional tolerrance + 8% in cement mortar (1:6) in superstructure etc. complete as per the Engineer-incharge. |
| 5 | Rigid smooth centering shuttering for R.C.C. works including false work dismateling then after including cost of materials in ground floor complete an directed by the Engineer-incharge - (b) Rigid smooth centering shuttering for R.C.C. works Roof Slab and Chhaja |
| 6 | R.C.C. work in C.C. (1:2:4) including hoisting laying curring for 28 days using 12mm. Size clean black hard granite crusher broken chips of approve quality and from approve quarry including cost taxes conveyance charges of all materials to the worksite with supply of all labour and TP required for the work etc complete as directed by the Engineer-incharge. |
| 7 | M.S. reinforcement for R.C.C. work including supplying, cutting, bending, binding tying the grills placing in position including cost of binding wire 18 to 20 guage per Qntl. Including cost of HYSD Still Bar (FE 415/ FE 500) |
| 8 | 12mm cement plaster in cement mortar (1:6) finished smooth to brick work after racking out joints including waterring and curring with cost, taxes, royalty and conveyance charges of all material to the worksite and supply of all labour and TP required for the work etc complete as directed by the Engineer-incharge. |
| 9 | Filling the foundation and plinth with excavated material as directed by the Engineer-incharge. |
| 10 | 2.5cm A S Flooring in CC ( 1:2:4) including punning with 12mm size chips |
| 11 | Cost,supplyinng, fixing, fitting of M.S Door/ M.S window including frame in Pump Chambe including all Taxes excluding cost of GST complete as per the Engineer-incharge. |
| 12 | Distempering two coats to walls with distermper of approved shade on new work to give an even shade including cost of distemper labour etc. complete. |
| 13 | Painting two coats with enamel paint for priming over iron work including cost of paint labour etc complete. |
| 14 | Fitting of 160 mm outer dia High Density Polythylene Pipes of specified material grade pressure rating by butt fusion welding method as per speciication laying in tranches including testing all cost etc fitting fixing of required nos. of HDPE Teee for outlet shaddle G.I. raiser, nipple for fitting of air valve, equal Tee etc. complete including conveyance of pipe from factory to work site testing of pipe line etc complete as per direction of Engineer - in-charge. including all Taxes excluding cost of GST |
| 15 | Labour charges for Installation and delivery fitting including fitting of Sluice Valve, NR Valve, Air Release Valve, PVC Tee and lowering of pump and transportation etc complete. fixing suction and delivery pipe to motor, NR Valve, Foot Valve, Sluice Valve and other fitting materials including cutting, welding etc. complete as per the direction of the Engineer-incharge. |
| 16 | Fabrication of special joint including cutting and welding of pipes out of M.S. pipe / 100mm dia G.I.pipe including welding charges etc. complete. |
| 17 | Construction of outlet at Tank |
| 18 | 5 HP/3.75 KW Energy efficiency Submersible pumpset of total head 25 mtr having 500 LPM discharge of reputed brand with BEE 3 Star rated energy efficiency suitable for 200 mm dia tube well as per IS specification with 2 pair U-Clamps 30 mtr of 4.00 sqmm flat cable and Impeller of Bronze grade LTB-2 of IS 318/1981 confirming to IS specification including all Taxes excluding cost of GST |
| 19 | Automatic star delta starter sheet steel enclouser suiatablle forr operation of squirrel cage induction motor upyo 10HP (8-13)with16 AMP(AC3) contracotor at 415V+6%-15%,3phase,50HZ AC supply with suitable overload relay ,NVC with electric pneumatic timer having depenndable protection against overload single phasing should be of reputed brand/make of ISI specification having wide dea;ership network for easy availabilty of spares including all Taxes excluding cost of GST |
| 20 | 3x10 sqmm PVC insulated (HD) tropoder armoured Electric Cable with alluminum conductor for use in 3 phase power system of working voltage upto including 1100 volts at 50Hz confirming to IS 7098 (Pt-II) of approved brand of ISI marked including all Taxes excluding cost of GST |
| 21 | 4.00mm2 Submerssible (3 Core) Flat Cable ISI mark ofreputed brand of ISI specification including all Taxes excluding cost of GST |
| 22 | 32 AMP Triple Pole Mainswith confirming to IS No.4064(Part I II) with ISI marking of reputed company with utilisation capacity cagegory AC- 22 of approved brand of ISI marked including all Taxes excluding cost of GST |
| 23 | 3KVAR Power Shunt Capacitor with ISI mark of of reputed approved brand of ISI marked including all Taxes excluding cost of GST |
| 24 | 80mm dia nominal bore G.I.pipe having wall thickness 4.5mm electrical resistance welded of medium class confirming to IS- 1239(part-1/2004) with latest ammendments, screwed at both ends as per IS-554 with socketed at one end and the other end protected with plastic threaded protector including its transportation and unloading at L.I.P. site. The socket confirming to ISI 1239(part II/1992) with latest ammendments in random length of 4 to 7 mtr.Each pipe should bear IS certification and manufacturers name/trade mark.including all Taxes excluding cost of GST |
| 25 | 80mm dia G.I.Bend ( Medium Duty) conforming to IS No-1239 (part II/1992) with ISI mark of reputed brand including all Taxes excluding cost of GST |
| 26 | 80mm dia G.I.Flange (Medium Duty) conforming to IS No-6392/1971 with ISI mark of reputed companyincluding all Taxes excluding cost of GST |
| 27 | 80mm dia G.I.Socket (Medium Duty) with ISI mark of reputed brandincluding all Taxes excluding cost of GST |
| 28 | 100mm dia G.I.Nipple ( Medium Duty) with ISI mark of reputed brand including all Taxes excluding cost of GST |
| 29 | 100mm dia C.I.Double Flanged Non Return Valve swing type PN-1.0 (IS-5312(Part-I-2004) with bypass arrangement with ISI mark of reputed brand including all Taxes excluding cost of GST |
| 30 | Cost, Supplying of ISI marked HDPE pipe fitting materials for High Density Polythelene (HDPE) Pipes for water supply of different nominal diameter as per ISI speifications including the rates of ex-factory, transportation, Cess etc complete but excluding cost of GST - 160 mm HDPE Elbow spigot design 6 kg |
| 31 | 150mm dia C.I. Butter Fly Valve BS:5155/15: Kirloskar or equivalent make 13095-CI MOC Lever Operated PN-1.0 with ISI mark of reputed iincluding all Taxes excluding cost of GST |
| 32 | Cost, supplyuing of M.S Nuts and Bolts (1/2\\" to 5/8\\") including all Taxes excluding cost of GST |
| 33 | Cost, supplying of 3mm thick Rubber Insertion including all Taxes excluding cost of GST |
| 34 | Cost, supplying of 160mmx160mmx110mm dia Weldless G.I.Tee (3.6mm thickness) with bend, closing and opening arrangement of reputed brand including all Taxes excluding cost of GST |
| 35 | Cost, supplying of 200X80mm dia M.S.T/W Cap with ISI mark of reputed brand including all Taxes excluding cost of GST |
| 36 | Cost, supplying of 50mm dia C.I double Air Release Valve PN 1.6 with saddle and Raiser pipe conforming to IS 14845 (SI) with ISI mark including all Taxes excluding cost of GST |
| 37 | Cost, Supplying of ISI marked High Density Polythelene (HDPE) Pipes for water supply as per IS 4984/2016 in the following Nominal diameter, Grades of materials, Pressure rating including the rates of ex-factory, transportation, pre post inspection, including all Taxes excluding cost of GST - 160mm Ø HDPE Pipe PE 80- PN 4 |
| 38 | Cost, Supplying of ISI marked HDPE pipe fitting materials for High Density Polythelene (HDPE) Pipes for water supply of different nominal diameter as per ISI speifications including all Taxes excluding cost of GST - 160 MM HDPE Tail piece 160 mm long |
| 39 | Cost, Supplying of ISI marked HDPE pipe fitting materials for High Density Polythelene (HDPE) Pipes for water supply of different nominal diameter as per ISI speifications including the rates of ex-factory, transportation,including all Taxes excluding cost of GST - 160 MM HDPE End cap |
| 40 | Cost, Supplying of ISI marked HDPE pipe fitting materials for High Density Polythelene (HDPE) Pipes for water supply of different nominal diameter as per ISI speifications including the rates of ex-factory, transportation, including all Taxes excluding cost of GST - 160X160X160 mm HDPE Tee spigot design 6 kg |
| 41 | Cost of 12mm PVC Insulated Steel Wire rope including all Taxes excluding cost of GST |
| 42 | Cost Supply of tool kit (Sly wrench, DE Spanner, Tester,Gloves etc) |
| 43 | 150mm dia G.I.Nipple ( Medium Duty) with ISI mark of reputed brand including all cost, conveyance, cess etc complete but excluding cost of GST |
| 44 | Cost, Supplying of ISI marked HDPE pipe fitting materials for High Density Polythelene (HDPE) Pipes for water supply of different nominal diameter as per ISI speifications including the rates of ex-factory, transportation, Cess etc complete but excluding cost of GST - 160X80 mm HDPE reducer |
| 45 | Earthwork in excavation of foundation in hard soil such as Hard stiff clay,stiff black cotton,hard red earth, shales, moorum ordinary gravels etc within50m. Initial lead and 1.5m. Initial lift including rough dressing and levelling the bed and depositing the excavated materials within initial lead at nearby the worksite for reuse including breaking clods and stacking rubble for spreading and leveling as the case may be etc complete as per direction of the Engineer-in-charge. (Excavation by mechanical means 60% manually 40%) for HDPE Pipe line |
| 46 | Cost of 300 mm dia RCC TW protection stand |
| 47 | Construction of Display Board with 45mm dia steel pipes 2nos with a height of 1.50mtr over the ground level having couping depth of 0.60mtr with a width of 1mtr jointed with MS plate of size 1.00mtrx0.75mtr and painting, lettering the detail salient features of project over the plate having radium back ground etc. complete as per direction of Engineer-in-Charge |
| 48 | 80 mm dia M.S TW clamp (Pair) with ISI mark of reuted brand including all cost conveyance, cess etc complete but excluding cost of GST. |
| 49 | Electrical Earthing including all materials as per the direction of the Engineer- incharge including all Taxes excluding cost of GST. |
| 50 | Filling in F P with excavated materials, after laying and fitting of HDPE/PVC pipes with fitting items, including well watering and ramming in hard soil such as hard stiff clay,stiff black cotton ,hard red earth, shales, moorum ordinary gravels within 50m initial lead and 1.5m initial lift including rough dressing breaking of clods and stacking rubble or spreading and levelling within the site as the case may be etc.complete including cost of all T P required for the work, cost of transportation, cess etc complete except GST as per direction of the Engineer-in-charge. (Mechanical 60% Manual 40%) |
| 51 | Electrical installation and energisation including cost of switchs, sockets, angle holder, 4 nos.bulbs, conduit pipe, 0.75 sqmm wire, 1.50 sqmm wire, 2.50 sqmm wire, 4.0 sqmm wire, 4 nos. of switch boards etc. including cost of labour, TP required, transportation to site, from site stock yard, cess etc complete except GST as per direction of Engineer-in-Charge. |
| 52 | Cost, supplying, all labour for fitting, fixing, errection of 33 KV intermediate pole 13 mtr long (160x150) mm WPB pole (30.44 kg/mtr) for power supply including cost of all materials, labour transportation ,inspection commissioning etc. complete in elephant corridor areas |
| 53 | Construction of 3 phase 3 wire 11 KV HT line as per REC standard confirming to RE Rules 1956 excluding 400 Kg. 10 Mtr. Long PSC pole support in 50 Mtr. Span.55sqmm AAA Conductor(149 kg/km) with double disc arrangement,11KV \\"V\\" cross arm with required nos. of 11 KV B S disc. Insulators(120 KN) and 11KV pin insulators(70 KN), Padding concreting of poles(1.5'X2'X3'),danger board at each pole, anticlimbing devices.Stay set at each bending point and double stay at end point with 18mm G.I. H.T. stay, concreting of stay with anchor plate etc. including cost of materials, labour, transportation, inspection commissioning etc. complete including painting in Navy Blue colour band with inscription of OLIC in each Pole as per direction of Engineer-in-Charge. |
| 54 | Construction erection of 11/0.416 KV, 25 KVA (BIS level-II star 2) D.P mounted Sub-Station including transformer confirming to RE Rules ,1956 mounted on 2.8 Mtr. Long structure, excluding 400 Kg. 10 Mtr. Long PSC pole,transformer mounting channel top channel made 0f 2.8 Mtr. Long 100x50x6 mm M.S. channel, transformer belting on 2.8 Mtr. long 50 x 50 x 5 mm M.S. Angle(all REC.SPN. Std.F-3) with all accessories like 3 pole 11 KV HG Fuse (F-5) A.B.Switches(400 Amp with ball bearing) (F-9) both mounted on 2.8M long 75x40x6 mm M.S. Channel and supported by 1.0 mtr. long 50x50x5 mm M.S. Angle with 3 nos. 11 KV lightening Arrestors and Distribution box for 63 KVA S/S, including cost of 35 sqmm 3.5 Core PVC cable carping padding of Poles, Danger board at each Pole, Anti Climbing Devices all other necessary fittings. 05 nos FI Pipe Earthing 40 Dia Medium gage 3 mtrs in no 04 G.I wire and 01 no G.I Flat Earthing for Neutral along with L.T.Distribution box including 100 Amps Kit Kat fuse with MCCB (As per DISTCOM specification). Long,fixing of stay set with 0.5 Cum cement concret foundation 1:3:6 of required size , 3 1/2 x 35 sqmm. PVC Cable , , Bolts, Brackets, Cable sockets etc. including cost of all materials, labour, transportation complete with liasioning for testing, inspection and commissioning including painting in Navy Blue colour band with inscription of OLIC in each Pole as per direction of Engineer-in-Charge. |
| 55 | Construction of 3 Phase L.T line as per REC standard confirming to RE rule 1956 with 300Kg 9 Mtr long PSC pole support in 33 mtr span length with 4x35mm² + 1x35 mm ² LT, XLPE AB cable with coil earthing device, LT dead end clam, Suspension clamp with G I hook, stay accessories such as wire insulator , clamp etc. nut bolts, alongwith concreting copping padding of poles and stayset as per direction of Engineer in Charge as per TPCOCL specification etc. including cost of all materials, labour , transportation complete with liaising for testing inspection commissioning as per specification of TPCODL etc complete. |
| 56 | Labour for drilling a perfectly vertical bore hole of specified depth below ground level in alluvial soil strata by mud rotary rig drilling as required to suit the site condition as per the direction of Engineer -In Charge including supply of Rig with its accessories, tools and plant and consummables etc for lowering of finished bore for 450mm dia. suitable for lowering of 200mm dia PVC pipes for housing fitted with socket with or without well screeen as per the necessity for the soft, medium, hard and boulder formation (G.I/PVC casing pipes if required by the contractor to prevent collapse of over burden portion) including lower and withdrawing of casing pipe after drilling 200mm to 450mm dia in over burder portion upto 100Mtr 00 to 30th mtr. |
| 57 | Labour for drilling a perfectly vertical bore hole of specified depth below ground level in alluvial soil strata by mud rotary rig drilling as required to suit the site condition as per the direction of Engineer -In Charge including supply of Rig with its accessories, tools and plant and consummables etc for lowering of finished bore for 450mm dia. suitable for lowering of 200mm dia PVC pipes for housing fitted with socket with or without well screeen as per the necessity for the soft, medium, hard and boulder formation (G.I/PVC casing pipes if required by the contractor to prevent collapse of over burden portion) including lower and withdrawing of casing pipe after drilling 200mm to 450mm dia in over burder portion upto 100Mtr 30st mtr to 60th mtr. |
| 58 | Cost, Supplying of ISI marked Casing Pipes as per IS:12818:2010 in the following Nominal diameter including the rates of ex-factory, transportation, pre post inspection, Cess etc complete but excluding the cost of GST - 200mm Ø SCHEDULE 80 casing pipe |
| 59 | Supply of all labour and T P for lowring following size G.I./PVC Pipes with or without slotted pipes as per the necessity from ground level and fitted fixed up in perfectly vertical position includind cutting and threading pipe and slotting pipe and fixed all joint materials, tools and plants etc. Complete and keeping the top of the casing pipe threaded including plugging tube well to prevent entry to foreign materialsfrom above excluding cost of fittings and jointing materials packing gravels around the casing in the annular space as per direction of the Engineer. (00 mtr to 100 mtrs) |
| 60 | Cost of slotting charges of 200 mm dia PVC(ASTM-D) Sch-80 pipe |
| 61 | Cost of bentonite drilling mud, including transportation to site, etc. |
| 62 | Providing of Graded and washed gravel of 'B' grade including transportation to site etc complete as per direction of Engineer -in-Ch arge. |
| 63 | Cost of 200 mm dia PVC Cone. |
| 64 | Cost of 200 mm dia PVC Nipple |
| 65 | Cleaning and developing the Tube well using own Air compressor continuously worked till clear and adequately discharge is obtained from the well including supply and use of all necessary equipments and labour complete as per the direction of Engineer in charge. |
| 66 | Excavation of mud pit, settling pit fluid channel back filling with preparation of approaches to movement of rig and ancillaries etc complete. |
| 67 | Operation of 5 HP Water pump for filling of mud pit. |
| 68 | Labour charges for loading and unloading of camp materials and drilling materials including transportation charges |
| 69 | Rig movement (To fro) |
| 70 | Cost of 200 mm dia Sch-80 PVC well cap Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 21, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 31, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 9 daysNov 02, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 11 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender