Tender For Construction Of One Stop Building At Raga Under Kamle District.
Tender Value
Ref. Documents
Estimated cost
Bid Submission
27 Oct 2026
3 days left
EMD
48694
Bank guarantee accepted
Document Fee
3000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Lower Subansiri → Arunachal Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction Of One Stop Building At Raga Under Kamle District.
BOQ
| Sl. No. | Item Description |
| 1 | Earthwork in excavation in foundation and trenches in soils containing 50% or more of shingles or small size boulders up to 30 cm size , lift up to 1.50 m and stacking the excavated soil not more than 3 m clear from the edge of the excavation and returning the stacked soil in 15 cm layers when required, into plinth, sides of foundation etc consolidating each deposited layer by ramming and watering and then disposing of all surplus excavated soils as directed within a lead of 50m. |
| 2 | Refilling excavated earth in foundations & plinths etc. in 15 cm layer including ramming & watering etc complete. |
| 3 | Filling in plinth with sand under floors including watering, ramming , consolidating & dressing complete |
| 4 | SH II :- Concrete Work |
| 5 | Providing and laying in foundations and plinth cement concrete 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) excluding the cost of centering and shuttering |
| 6 | SH III :- RCC Work |
| 7 | Reinforced concrete work in foundations, footings, bases of columns etc. and mass concrete excluding cost of centering ,shuttering and reinforcement. |
| 8 | a) 1 : 1.5 : 3 ( 1 cement : 1.5 coarse sand : 3 stone aggregate 20 mm nominal size) |
| 9 | Reinforcement cement concrete work in columns , pillars, piers, abutments, post and struts erc up to floor two level including finishing and plastering the exposed surface with cement mortar 1 : 3 ( 1 cement : 3 fine sand ) of thickness not exceeding 6 mm to give a smooth and even surface but excluding cost of centering , shuttering and reinforcement. |
| 10 | a) 1 : 1.5 : 3 (1 cement : 1.5 coarse sand : 3 stone aggregate 20 mm nominal size) |
| 11 | Reinforced cement concrete in suspended floors, roofs, landings and balconies upto floor two level including finishing and plastering the exposed surface with cement mortar 1 : 3 (1 cement : 3 fine sand) of thickness not exceeding 6 mm to give a smooth and even surface but excluding cost of centring and shuttering and reinforcement with M20 (1 cement : 1.5 coarse sand : 3 stone aggregate 20 mm nominal size). |
| 12 | 1 : 1.5 : 3 ( 1 cement : 1.5 coarse sand : 3 stone aggregate 20 mm nominal size) |
| 13 | Reinforced cement concrete in chajjas exceeding 15 mm in thickness up to floor two level including centring and shuttering complete but excluding the cost of reinforcement with 1 : 2 : 4 ( 1 cement : 2 coarse sand : 4 stone aggregate 20 mm nominal size). |
| 14 | Centring and shuttering including strutting , propping etc and removal of formwork for : |
| 15 | a) Foundation, footings, bases of columns etc. and mass concrete |
| 16 | b) column, pillars, posts and struts etc. |
| 17 | c) Lintels, beams, girders, bressumers and cantilevers etc. |
| 18 | IV:- STEEL WORK |
| 19 | Reinforcement of RCC work including bending, binding and placing in position complete. |
| 20 | a) Mild steel and medium tensile steel bars. |
| 21 | Distribution Bars 10 mm Dia @300mm C/c including Stairs |
| 22 | SH IV :- Walling |
| 23 | Extra for brick work with best available local bricks in superstructure above plinth levelup to floor two level. |
| 24 | SH IV :- Wood Work |
| 25 | Providing and fixing 40 x 30 mm flat iron hold fast 40 cm long including fixing to frame with 10 mm dia. Bolts,nuts and wooden plugs and embedding in cement concrete blocks 30 x 10 x 15 cm in 1 : 3 : 6 ( 1 cement : 3 sand : 6 hard stone chips 40 mm nominal size ). |
| 26 | Providing and fixing glazing in alluminium door, windows, ventilators, shutters and partitions etc. with EPDM rubber/ neaprene gasket etc. complete as per the architectural drawing and the direction of engineer. |
| 27 | Providing and fixing aluminum sliding door bolts anodised transparent or dyed to required color or shade with nuts and screws etc complete.a) 300 x 16 mm |
| 28 | Providing and fixing aluminum Tower bolts anodized or transparent or dyed to required color or shade with necessary screws etc complete. |
| 29 | a)250 x 10 mm |
| 30 | b) 100 x 10 mm |
| 31 | Providing best available local wood ( class - B II ) work in frames of false ceiling , partitions and trusses etc. sawn and put up in position. |
| 32 | Providing & fixing panelled , glazed or panelled & glazed shutters for doors, windows & clerestory windows including necessary iron butt hinges with necessary screws. |
| 33 | a) 38 mm thick best available local wood, class B-I |
| 34 | Providing and MS grills of required pattern in wooden frames of windows etc with MS flat, square or round bars with round headed bolts and nuts or by screws. |
| 35 | Proving and fixing MS sliding doors bolts, bright finished or black enamelled with nuts and screws etc complete. |
| 36 | a) 300 x 16 mm. |
| 37 | Providing and fixing MS tower bolts (barrel type) with necessary screws etc complete. |
| 38 | a) For doors : 250 x 10 mm |
| 39 | b) For windows : 150 x 10 mm |
| 40 | Providing and fixing MS handles with necessary screws etc complete. |
| 41 | For doors and windows : 100 mm |
| 42 | Providing and fixing MS Hooks and Eyes |
| 43 | For windows : 150 mm |
| 44 | SH V :- Roofing |
| 45 | Providing corrugated GI sheet roofing fixed with galvanised iron J or L hooks , bolts & nuts 8 mm dia. With bitumen and G.I. limpet washers filled with white lead complete, excluding the cost of purlins, rafters and trusses. |
| 46 | a) 0.80 mm thick sheet |
| 47 | Providing ridges or hips 60 cm overall in plain G.I. sheet fixed with galvanised iron J or L hooks , bolts and nuts 8 mm dia.limpet and bitumen washers complete. |
| 48 | Providing and fixing 4 .0 mm thick asbestors plain sheet ceiling of approved quality with necessary nails etc . Complete ( frame work for base to be paid seperately ) |
| 49 | Providing and fixing plain, square edged wooden beading 38 mm x 12 mm section with screws of approved quality for ceiling. |
| 50 | b)local soft wood |
| 51 | Extra for making chamferd edges of beading. |
| 52 | Providing and fixing 2.50 cm thick approved local wood eaves boards 23 cm wide with providings necessary mouldings etc. |
| 53 | SH VI :- Flooring |
| 54 | Cement concrete flooring 1 : 2 : 4 ( 1 cement : 2 coarse sand : 4 gradded stone aggregate 20 mm nominal size ) finished with a floating coat of neat cement |
| 55 | b) 40 mm thick |
| 56 | 12 mm cement plaster 1 : 6 ( 1 cement : 6 fine sand ) |
| 57 | Pre-cast terrazzo tiles 20 mm thick with white, black or white and black marble chips of sizes up to 6 mm laid in floor, treads of steps and landings on 25 mm thick bed of cement mortar 1 : 3 (1 cement : 3 coarse sand) jointed with neat cement slurry mixed with pigment to match the shade of the tiles including rubbing and polishing complete with pre-cast tiles of : a) Light shade using white cement |
| 58 | Neat cement Punning |
| 59 | SH VII :- Finishing |
| 60 | Distempering with dry distemper of approved brand and manufacture (two or more coats) and of required shade on new work including priming coat of whiting to give an even shade. |
| 61 | Appingly primming coat with ready mixed pink primer of approved brand & manufacture on woodwork complete |
| 62 | Painting two or more coats ( excluding priming coat ) with superior ready mixed paint for woodwork of approved brand & manufacture of all shades on new work to give an even shade |
| 63 | Applying priming coat with ready mixed primer of approved brand and manufacture on steel work. |
| 64 | Painting two or more coats ( excluding priming coat ) with superior ready mixed paint for steelwork of approved brand & manufacture of all shades on new work to give an even shade |
| 65 | Painting two coats with oil type wood preservative of approved brand and manufacture on new work |
| 66 | Toilet |
| 67 | Wash basin |
| 68 | Mirror |
| 69 | Carriage of Engineering materials like boulder, aggregate, sand, plank, scant etc. from quarry to site of work by mechanical transport including loading, unloading and stacking complete as per the direction of Engineer-in-Charge. |
| 70 | Aggregate 20 mm |
| 71 | Carriage of Engineering materials like Cement, Bricks, Steel, CGI Sheet, AC Sheet, Bridge parts etc. from Lakhimpur to Raga site of work by mechanical transport including loading, unloading and stacking complete as per the direction of Engineer-in-Charge. |
| 72 | Cement |
| 73 | Bricks |
| 74 | Steels |
| 75 | AC Sheets |
| 76 | CGI Sheet |
| 77 | SEPTIC TANK |
| 78 | SH I :- EARTHWORK |
| 79 | Earthwork in excavation in foundation and trenches in soils containing 50% or more of shingles or small size boulders up to 30 cm size , lift up to 1.50 m and stacking the excavated soil not more than 3 m clear from the edge of the excavation and returning the stacked soil in 15 cm layers when required, into plinth, sides of foundation etc consolidating each deposited layer by ramming and watering and then disposing of all surplus excavated soils as directed within a lead of 50m. |
| 80 | SH II :- Concrete Work |
| 81 | Providing and laying in foundations and plinth cement concrete 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) excluding the cost of centering and shuttering |
| 82 | SH III :- RCC Work |
| 83 | Rainforced cement concrete work in wall………finishing and rainforcement. |
| 84 | b) 1 : 1.5 : 3 ( 1 cement : 1.5 coarse sand : 3 stone aggregate 20 mm nominal size) |
| 85 | Centring and shuttering including strutting , propping etc and removal of formwork for : |
| 86 | a) Foundation, footings, bases of columns etc. and mass concrete |
| 87 | Reinforcement of RCC work including bending, binding and placing in position complete. |
| 88 | a) Mild steel and medium tensile steel bars. |
| 89 | b)Cold twisted bars |
| 90 | SH VI :- Flooring |
| 91 | Cement concrete flooring 1 : 2 : 4 ( 1 cement : 2 coarse sand : 4 gradded stone aggregate 20 mm nominal size ) finished with a floating coat of neat cement |
| 92 | 12 mm cement plaster 1 : 6 ( 1 cement : 6 fine sand ) |
| 93 | Neat cement Punning |
| 94 | Distempering with dry distemper of approved brand and manufacture (two or more coats) and of required shade on new work including priming coat of whiting to give an even shade. |
| 95 | Carriage of Engineering materials like boulder, aggregate, sand, plank, scant etc. from quarry to site of work by mechanical transport including loading, unloading and stacking complete as per the direction of Engineer-in-Charge. |
| 96 | Aggregate 20 mm |
| 97 | Carriage of Engineering materials like Cement, Bricks, Steel, CGI Sheet, AC Sheet, Bridge parts etc. from Silapatar to Daporijo site of work by mechanical transport including loading, unloading and stacking complete as per the direction of Engineer-in-Charge. |
| 98 | Cement |
| 99 | Steels |
| 100 | Site Development 300 Sq.m |
| 101 | Solar Photo Voltaic Power Generation 750 WattSystem |
| 102 | Internal water supply and sanitary installation @ 5% |
| 103 | Internal Electrical Installation & Service @ 12.5% Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 21, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 27, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 3 daysOct 28, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 4 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender