Tender For Improvement Of Fiac, Buguda
Tender Value
6.69 Lakhs
Estimated cost
Bid Submission
02 Nov 2026
6 days left
EMD
6699
Bank guarantee accepted
Document Fee
4000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Ganjam → Odisha
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Improvement Of Fiac, Buguda
BOQ
| Sl. No. | Item Description |
| 1 | Cleaning of worksite by clearing & uprooting of grass/bushes/shrubs etc. and their removal & disposal to a distance upto 50 mts from the worksite |
| 2 | Excavation of foundation in hard including levelling and dressing the bed and sides depositing muck within initial lead and lift. |
| 3 | Filling foundation and plinth with sand well watered and rammed including cost and conveyance of materials. |
| 4 | Cement concrete (1:4:8) using 4cm CBHG metal including cost,conveyance and royality of materials curing etc. complete |
| 5 | Cement concrete (1:2:4) using 12mm CBHG metal including cost,conveyance and royality of materials curing etc. complete |
| 6 | Brick work with Flyash Brick having crushing strength not less than 75 Kg/cm2 with dimensional tolerance ± 8 percent in cement mortar (1:6) in foundation and plinth |
| 7 | Brick work with Flyash Brick having crushing strength not less than 75 Kg/cm2 with dimensional tolerance ± 8 percent in cement mortar (1:6) in superstructure in ground floor |
| 8 | 12 mm (½”) thick cement plaster (1:6) finished smooth to outside smooth surface of brick walls after raking out the jointincluding watering and curing with cost, conveyance, royaltiesand excluding GST of all materials with all labour and T&Prequired for the work etc. complete in all respect.a) Ground Floor |
| 9 | b) First Floor |
| 10 | c) Second Floor |
| 11 | 16 mm (5/8”) thick cement plaster (1:6) finished smooth to inside rough surface of 9”/10” thick brick walls after rakingout the joints including watering and curing with cost withcost, conveyance, royalties and excluding GST of all materialswith all labour, T&P required for the work etc. complete.a) Ground Floor |
| 12 | b) First Floor |
| 13 | c) Second Floor |
| 14 | Priming one coat to wall surface with water bound cement primer including cost, conveyance,excluding GST of all materials, labour and T&P etc. complete |
| 15 | b) First Floor |
| 16 | c) Second Floor |
| 17 | Finishing wall surface with Cement wall putty (Water based) of approved make and finished smooth and even surface to receive painting including cost of scaffolding staging charges with cost of all materials complete. a) Ground Floor |
| 18 | b) First Floor |
| 19 | Wall painting -2 coats with plastic emulsion paint of approved shade on new work to give an even shade including cost of paint. a) Ground Floor |
| 20 | b) First Floor |
| 21 | c) Second Floor |
| 22 | Finishing exterior walls with weather coat of approved shade two coats on new work to give an even shade including cost of paint. a) Ground Floor |
| 23 | b) First Floor |
| 24 | c) Second Floor |
| 25 | Red Oxide Priming one coat with Red oxide primer of approvedquality etc. complete as per direction of Engg-in-Charge a) Ground Floor |
| 26 | b) First Floor |
| 27 | c) Second Floor |
| 28 | Enamel painting 2-Coats over iron works with enamel paint of approved quality including cost of enamel paint a) Ground Floor |
| 29 | b) First Floor |
| 30 | c) Second Floor |
| 31 | Supplying, fitting & fixing of Vitrified Industrial tiles in floors of size (30 x 30) cm of approved make confirming to IS: 4457 laid on 20mm thick CM (1:4) and filling joints with white cement of aproved quality including cost of all materials, labour T & P etc required for the work. a) Ground Floor |
| 32 | b) First Floor |
| 33 | Dismantling and removing doors,windows and ventilators, including removal of frame, hinges, fastening and stacking the same for reuse and removing the debris within 50 m lead |
| 34 | Supplying , fitting and fixing of openable UPVC doors with door frame of approved make with 6mm thick glass of approved quality complete with frame, shutters and all fitting and fixtures |
| 35 | Supplying , fitting and fixing of two track UPVC sliding window of approved make with 6mm thick glass of approved quality complete with frame, shutters and all fitting and fixtures. |
| 36 | Supplying, fitting and fixing of powder coated M.S. collapsible gate/Window grill/Ventilator etc made out of M.S. square bar / M.S. flats / M.S. angles as per approved drawing and design, cutting to required size and welding properly, finished smooth and sand papering, including cost, conveyance, taxes of all materials, required screws, cost of all labour, T&P etc. as required for the work complete as per direction in ground floor. |
| 37 | Supplying, fitting and fixing of Stainless steel of 304 grade in hand railing using 50mm dia of 2mm thick circular pipe with Balustrade of size 32mm x 32mm x 2mm @ 0.90m C/C and stainless square pipe bracing of size 32mm x 32mm x 2mm in 3 rows in stair case as per approved design and specification, buffing, polishing etc with cost, conveyance, taxes of all materials, labour, T&P etc. required for the complete in all respect. |
| 38 | Providing and applying of post construction antitermite treatment by drilling 12mm dia holes at a distance of 30cm and at junctions of wall and floor about 300 apart and deep enough to reach the soil below and chemical emulsion (PREMISE, IMIDACHLOPRIED 30.5 SC OF BAYER MAKE mixed with 475 ltrs water) pumped these holes to soak the soil @ 1ltr. solution of each hole as per manufactureers specification and the holes should be plugged with filling materials including cost of all materials, labour charges, conveyance and all taxes and hiring charges of machineries etc. complete as per direction of Engineer-incharge. |
| 39 | Providing, fitting and fixing of wall paneling made up with 19 mm BWR board fixed on frames of size 2' x 2' made up with 2 1/2\\" x 1 1/2\\" size aluminium channel including drilling holes with rawl plug and screws pasting 1mm thick laminates on exposed surface with adhesive and headless pin with all accessories complete. |
| 40 | Providing, fitting, & Fixing of Central Table for Dias & hall with one shelf made up with 19 mm thick phenol bounded BWR grade block board and subsequently finished with 1 mm thick BWR grade decorative laminates (Outer) & 0.75 mm thick (Inner) laminates of approved shade on required side over wooden frame fixed with raw plug including drilling of necessary holes fixed by synthetic adhesive and headless pins with all accessories etc. complete as per direction of Engineer in charge. |
| 41 | supply and fixing of roller blinds by fixing powder coated channel,bottom channel with bottom end cap,control unit and good quality of .6mm thick fabric of approved design and quality etc.complete |
| 42 | Cost,conveyance,Supplying, fitting and fixing of Stainless steel letters with logo as sign board of training hall on wall of appropriate size. |
| 43 | Letter writing on front wall of the building for signboard purpose on a base of weather coat paint including all cost of paints materials & labour charges etc |
| 44 | Wiring of circuit/Recessed Sub-main wiring alongwith earth wire with the following sizes of PVC insulated single core multistrand copper conductor, ISI marked conforming to IS-694/1990 in 20mm dia non metallic heavy duty flexible conduit, 1.6 mm in recessed PVC conduit as required (Make of wire- Finolex/L&T/Anchor/Havells/V-Guard/Great White/Mescab/HPL)2 X 1.5 sq.mm + 1 x 1.5 sq.mm |
| 45 | S/F of Exhaust Fan of size 9\\"/10\\" along with accessories and connections |
| 46 | Supply and fixing of following Piano Type Switch/ Socket ISI marked on the existing switch board / cover including connections etc as required.(Make- / Cona/ Havells/ Great White ).5 Amp switch |
| 47 | Supplying all materials, labour, T & P for cutting holes in brick/stone masonry walls in all floors for taking GI/PVC pipes and fittings through & making good to the damages with CM(1:4) etc. all complete to pass through 125mm to 250 mm thick walls. |
| 48 | Supplying all labour T & P & materials & cutting grooves in pucca floors & walls veritically & horizontally to the required depth & width for fixing GI/PVC pipes & fittings, testing the pipe line against leakage & making good to damages etc. all complete. |
| 49 | Supplying all materials, labours, taxes and T&P etc for fitting & fixing of U-PVC/Sch. PVC pipes (ORIPLAST/Equvalent make) of following dia to walls,ceiling and floors with clamps/hooks & including making good to damages etc. all complete. 15 mm dia PVC (ASTM) pipe |
| 50 | 20 mm dia PVC (ASTM) pipe |
| 51 | 25 mm dia PVC (ASTM) pipe |
| 52 | Supplying all materials, labour, T & P in all floors for fitting & fixing of U-PVC fixtures of the following diameter including supply of required jointing materials etc. all complete25 mm dia Ball Valve |
| 53 | 20 mm dia union |
| 54 | 20 mm dia elbow |
| 55 | 20mm dia Tee |
| 56 | (20x15) mm RS / FTA /MTA |
| 57 | Supplying all materials, labour, T & P for fitting and fixing of different types of Brass/ CP fittings accessories including supply of jointing materials etc. all complete. 15 mm dia short body CP bib cock/pillar cock |
| 58 | 15 mm CP 2 way Bib Cock |
| 59 | 110 mm dia CP grating/Floor jally |
| 60 | Supplying all materials, labour, T & P in all floors for laying in trenchs unplastisized PVC SW pipes confirming to IS:4985-2000 class-IV (4Kgf/Cm2) of following ominal bore including supply of jointing materials and testing etc. all complete 75 mm dia PVC pipe |
| 61 | 110mm dia PVC pipe |
| 62 | Supplying all materials, labour, T & P in all floors for fitting and fixing of PVC SW pipe fittings of the following diameter to walls with nails, bobbins,wooden plugs laying in trenches including jointing with rubber lubricant by non-heat appliction method, testing, earthwork in excavation and refilling of trenches etc-all complete 110 mm dia door Tee |
| 63 | 75 mm dia plain Tee |
| 64 | 75 mm dia P -Trap/N-Trap |
| 65 | 75 mm dia plain bend |
| 66 | 75 mm dia cowl |
| 67 | 110/75/50 mm dia clamp |
| 68 | Supplying all materials, labour, T & P and fixing Wash Basins with hole for pillar cock with cast iron or M.S. brackets including cutting holes in walls and making good to the damages with supply of wooden plugs, screws and cement etc. and connections to waste pipe /pillar cock / supply main line etc. all complete :- With Bib Cock & all fittings 18\\" X 12\\" Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 19, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 02, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 6 daysNov 04, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 8 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender