Tender For Covering Work Of Nagarparishad Rub, Sriganganagar
Tender Value
2.03 Crore
Estimated cost
Bid Submission
10 Nov 2026
14 days left
EMD
4.07 Lakhs
Bank guarantee accepted
Document Fee
2000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Ganganagar → Rajasthan
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Covering Work Of Nagarparishad Rub, Sriganganagar
BOQ
| Sl. No. | Item Description |
| 1 | Part A (Shade Civil Work) |
| 2 | Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer-in-charge. 1: 3: 6 or richer mix. |
| 3 | Earth work in excavation by mechanical means (Hydraulic Excavator )/ manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including taking out the excavated soil and depositing and refilling of jhiri with watering & ramming and disposal of surplus excavated soil as directed with in a lead of 50 meter. All kinds of soils |
| 4 | Providing and laying in position cement concrete including curing, compaction etc. complete in specified grade excluding the cost of centering and shuttering - All work up to plinth level. 1:4:8 ( 1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size). |
| 5 | Centering and Shuttering with plywood or steel sheets including strutting, propping bracing both ways and removal of formwork for foundation , footings, strap beam, raft , bases of columns etc. |
| 6 | Providing and laying in position specified grade of cement concrete for all RCC structural elements upto plinth level including curing, compaction, finishing with rendering in cement sand mortar 1:3 (1 cement: 3 coarse sand) and making good the joints and cost of plastizers( if required) excluding the cost of centering, shuttering and reinforcement. M25 grade Nominal Mix / Design Mix |
| 7 | Providing and fabricating reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding (including cost of binding wire) all complete up to floor five level. Thermo-mechanically Treated bars (Conforming of relevent IS code) |
| 8 | Steel work in built up tubular trusses including cutting, hoisting ( height upto 10 m)fixing in position and applying a priming coat of approved steel primer, welded and bolted including special shaped washers etc. complete. Hot finished seamless type tubes. Truss Structure with Columns @ 30 Kg/ Sqm |
| 9 | Providing & fixing of colour coated trapezoidal profile sheet of 1015 mm supply cover width and 1072mm effective supply nominal 28.5 mm deep ribs with subtle square fluting in the five pan at nominal 200 mm centre-to-centre. The end rib shall be designed for anti-capillary action, to avoid any seepage of water through the lateral overlap. The feed material is manufactured out of nominal 0.50 mm Total Coated Thickness (TCT), Hi Tensile steel with min. 550 MPa yield strength, metallic hot dip coated with Aluminium-Zinc alloy (55% Aluminium, 45% Zinc) as per AS 1397 – Zincalume AZ150 (Min. 150 gms/sq.mt total on both sides) with Color bond steel quality paint coat. The paint shall have a total coating thickness of nominal 35 μm, comprising of nominal 20μm exterior coat on top surface and nominal 5 μm reverse coat on back surface over nominal 5 μm primer coat on both surfaces of approved colour shade by the department. The steel sheet shall be fastened with nominal 40 μm zinc coated or nominal 25 μm zinc-tin alloy coated, Hex head, self-drilling screw as per AS 3566-2002 Class 3 fasteners of approved make (Buildex or equivalent) with EPDM washer as per the requirement considering the profile shape and design load. The fastener size shall be calculated as per the design or manufacturers recommendations. The profile sheet, fastener size etc. shall be approved by the department. The minimum overlap of the sheet should not be less than 75mm. All the accessories like gutter / flashing / capping shall be made from the same material (or manufactures recommendation) which is used for main cladding application. The measurement shall be based on finished/ covered surface area (Lysaght TRIMDEK Tata Blue Scope or equivalent make or equivalent) Add extra over crimping the surface of the trapezodial profile sheet to fit the shape of the truss work prepared for roofing including all cutting, overlaping etc. |
| 10 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : Two or more coats on new work |
| 11 | Providing and fixing steel gate, grating , and grills made of angles, tees, square bars, flats,or black pipe with holdfast and fittings complete as per design and drawing including cutting welding and fabrication with priming coat of red oxide |
| 12 | Marking Centre Line and stop lines etc. on road as per IRC pattern with thermoplastic paint of approved quality and make without glass beads laid on the road surface at temperature 160\\" C with a special applicator machine complete with a special applicator machine complete with labour material and traffic diversion arrangements. |
| 13 | Providing and erecting overhead signs with a corrosion resistant 2mm thick aluminium alloy sheet reflectorised with high intensity retro-reflective sheeting of encapsulated lense type with vertical and lateral clearance given in clause 802.2 and 802.3 and installed as per clause 802.7 over a designed support system of aluminium alloy or galvanised steel trestles and trusses of sections and type as per structural design requirements and approved plans Truss and Vertical Support |
| 14 | Aluminium Alloy Plate for Over Head Sign |
| 15 | Part B (Rain Water Harvesting Work) |
| 16 | Construction of tube-well from ground levels to accommodate housing and assembly pipe of following sizes in all types of alluvium strata by percussion/ rotary drilling method and with gravel as per IS:4097-1967 and packing as per IS:2800 (Part I -& II) 1979 as amended upto date (the work includes the cost of gravel & its primary packing and packing during development, lowering of housing & strainer assembly pipes, with supply and wrapping of coirrope, wherever necessary for arresting fine sand particles. The work will not include cost of housing pipe and strainer pipe assembly and development work, but work would be completed after obtaining sand free water).Upto 100 Meter depth Nominal bore 250 mm dia |
| 17 | Nominal bore 250 mm dia |
| 18 | 250 mm dia U-PVC pipes with rubber ring (working pressure 6 kg / cm^2) as per IS: 4985 |
| 19 | 160 mm dia U-PVC pipes with rubber ring (working pressure 6 kg / cm^2) as per IS: 4985 |
| 20 | Testing verticality of tube-well by plumbing system and yield test anddraw down test by pumping system as per IS: 2800 (Part II) 1979. |
| 21 | Supply and fixing of tube well cover of M.S. sheet (6mm thick) with nuts and bolts complete for casing size: 250 mm dia |
| 22 | Earth work in excavation by mechanical means (Hydraulic Excavator )/ manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sum on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including taking out the excavated soil and depositing and refilling of jhiri with watering & ramming and disposal of surplus excavated soil as directed with in a lead of 50 meter. All kinds of soils |
| 23 | Providing and laying in position cement concrete including curing compaction etc.complete in specified grade excluding the cost of centring and shuttering - All work upto plinth level :1:4:8 (1 Cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size). |
| 24 | Brick work with common burnt clay F.P.S.(Non Modular) bricks of class designation 7.5 in foundation and plinth with Cement mortar 1 : 6 (1 cement : 6 coarse sand) |
| 25 | Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry, making of lines or groove etc complete but excluding the cost of nosing of steps etc. complete. 40mm thick with 20mm thick nominal size aggregate. |
| 26 | Plaster on new surface on walls in cement sand mortar 1:4 including racking of joints etc. complete fine finish :12mm thick |
| 27 | Providing and laying in position cement concrete including curing, compaction etc. complete in specified grade excluding the cost of centering and shuttering - All work up to plinth level. M20 grade Nominal Mix 1: 1.5: 3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20mm nominal size). |
| 28 | Providing and fixing steel gate, grating , and grills made of angles, tees, square bars, flats,or black pipe with holdfast and fittings complete as per design and drawing including cutting welding and fabrication with priming coat of red oxide |
| 29 | Installation of submersible motor pump set in tube-well/open well complete (labour charges only) including transportation of tripod, chain pulley block & any other material required for lowering purpose. |
| 30 | Supply Installation testing & Commissioning of Radial/mixed flow ISI marked water filled submersible motor pumpsets suitable for100/150 mm dia borewell.The size of adopter fixed on top of the motor should exceed the top of coupler,for safegaurd the coupler.The construction material of motor and pump should match IS:8034:2018and IS9283 guideline.The radial flow pumpset should operate a t 5 star energy efficiency level of BEE and mixed flow pumpset should operate at 3star energy level of BEE,accompained by valid BEE certificate.Motor should be IE2 class as per IEC60034-2-1:2007,IEC60034-30:2008,&IS12615:2011with required accessories including making connection suitable for Borewell.The job includes labour part of lowering of riser pipe G.I./H.D.P.E.with rope,cables & pump,installation of complete fitting and accessories,jointing of electrical cables upto switch board.All labour for testing of submersible pump sset and supply of water to watermains,complete in all respect.All as per pre approved by Engineer incharge.For additional technical parameters of products/work,refer Annexure\\"A\\" attached with this BSR .150mm diameter Submersiblepump shall have following HP Rating,phase, Head range, Discharge range respectively. 10.0 HP, 3-Ø, (91 - 115)Mtr, (285-180) LPM |
| 31 | Supply Installation testing & Commissioning of ISO certified company made DOL/Star-Delta Starter panel made out from1.6mm thick powder coated CRCA sheet,enclosure comprising of over load protection relay,short circuit & single phasing protection ,Illuminated ON/OFF push buttons,ammeter,voltmeter,indicating lamps etc.suitable for following rating motors complete in all respect.Appropriate typetes tcertificate/OEM test report shall be submitted.All as per pre approved by Enginee rin charge.For additional technical parameters of products/work,refer Annexure\\"A\\"attached with this BSR .For Three phase Submersible / Mono block pump 3.0 HP to 10.0 HP ( Star / Delta starter ) Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 21, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 10, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 14 daysNov 12, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 16 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender