Short dated tender - Tender For Construction & Commissioning Of Open Well At Koshala Ram Siyag Ki Dhani Under Dmft
Tender Value
18 Lakhs
Estimated cost
Bid Submission
23 Oct 2026
1 days left
EMD
36000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Barmer → Rajasthan
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Short dated tender - Tender for Construction & Commissioning Of Open Well At Koshala Ram Siyag Ki Dhani Under Dmft
BOQ
| Sl. No. | Item Description |
| 1 | PHED BSR-2023-24 Exclusive of GST |
| 2 | Earth work in excavation over areas (exceding 30cm depth, 1.5 mtr in width and I 0 SQM in plan) for construction of open well, lift up to 1.5 Mtr. including taking out the excavated soil and disposal of surplus excavated soil as directed within a lead of 50 meter. |
| 3 | Ordinary Rock |
| 4 | Add extra over item No. 2.35.2-4 for every additional lift of I .5 Mtr. or part thereof: In Ordinary rock and hard rock. 1.50 to 3.00 Mtr. |
| 5 | 3.00 to 4.50 Mtr. |
| 6 | 4.50 to 6.00 Mtr. |
| 7 | 6.00 to 7.50 Mtr. |
| 8 | 7.50 to 9.00 Mtr. |
| 9 | 9.00 to 10.50 Mtr. |
| 10 | 10.50 to 12.00 Mtr. |
| 11 | 12.00 to 13.50 Mtr. |
| 12 | 13.50 to 15.00 Mtr. |
| 13 | 15.00 to 16.50 Mtr. |
| 14 | 16.50 to 18.00 Mtr. |
| 15 | 18.00 to 19.50 Mtr. |
| 16 | 19.50 to 21.00 Mtr. |
| 17 | 21.00 to 22.50 Mtr. |
| 18 | 22.50 to 24.00 Mtr. |
| 19 | 24.00 to 25.50 Mtr. |
| 20 | 25.50 to 27.00 Mtr. |
| 21 | 27.00 to 28.50 Mtr. |
| 22 | 28.50 to 30.00 Mtr. |
| 23 | 30.00 to 31.50 Mtr. |
| 24 | 31.50 to 33.00 Mtr. |
| 25 | 33.00 to 34.50 Mtr. |
| 26 | 34.50 to 36.00 Mtr. |
| 27 | 36.00 to 37.50 Mtr. |
| 28 | 37.50 to 39.00 Mtr. |
| 29 | 39.00 to 40.50 Mtr. |
| 30 | 40.50 to 42.00 Mtr. |
| 31 | 42.00 to 43.50 Mtr. |
| 32 | 43.50 to 45.00 Mtr. |
| 33 | 45.00 to 46.50 Mtr. |
| 34 | 46.50 to 48.00 Mtr. |
| 35 | 48.00 to 49.50 Mtr. |
| 36 | 49.50 to 51.00 Mtr. |
| 37 | 51.00 to 52.50 Mtr. |
| 38 | 52.50 to 54.00 Mtr. |
| 39 | 54.00 to 55.50 Mtr. |
| 40 | 55.50 to 57.00 Mtr. |
| 41 | 57.00 to 58.50 Mtr. |
| 42 | 58.50 to 60.00 Mtr. |
| 43 | Add 20% extra over item No. 2.39 for excavation in saturated soil where pumping or baling out of water is required, including shoring strutting where required and dewatering. 55.00 Mtr to 65.00 Mtr. |
| 44 | Providing and laying in position specified grade of cement concrete for RCC structural elements upto floor five level including curing, compaction, finishing with rendering in cement sand mortar 1:3 (1 cement: 3 coarse sand) and making good the joints and cost of plastizers (if required ) excluding the cost of centering, shuttering and reinforcement for Walls (any thickness) including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. M20 grade Nominal Mix / Design Mix |
| 45 | Centering & shuttering with plywood or steel sheets including strutting, propping bracing both ways with steel props and removal of formwork for upto floor five level for : |
| 46 | Providing and fabricating reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding (including cost of binding wire) all complete up to floor five level. Cold twisted deformed bars (IS : 1786) |
| 47 | Providing and fixing steel gate, grating , and grills made of angles, tees, square bars, flats,or black pipe with holdfast and fittings complete as per design and drawing including cutting welding and fabrication with priming coat of red oxide |
| 48 | Labour Charges for Horizontal Boring 100 mm Dia Open Well in Rocky Strata with all Type of Rock Cutting & Drilling Tools etc. Including Tools & Dewatering. (Rates Are Exclusive of GST) |
| 49 | Supply & Installation of 3 phase ISI marked submersible motor pump set of five star rating by BEE and as per JS: 8034-2011 (pump) and IS 9283-2013 (motor) or amended up to date of approved make of following duty condition with required accessories including making connection suitable for tube well/DCB. The job includes lowering of motor pump, installation of complete fitting & accessories, jointing of electrical cables up to switch board, testing of submersible pump set and interconnection up to water mains, complete in all respect. 7.5 KW (10 HP) & head up to 120 mtr |
| 50 | Supply & Fixing of ISi marked three core PVC flat submersible cable as per IS 694: 1990 or amended up to date and conductor as per class 5 of IS 8 130: 1980 includ ing making connection etc. 6 Sqmm 3 Core |
| 51 | 16 Sqmm 3 Core |
| 52 | Providing & Lowering in tubewell ISl marked GI Pipe \\"B\\" class as per IS: 1239 or amended up to date threaded and double flanged (welded) on both ends and two number 25x3mm flat welded on both ends between pipe & flange, rubber washer & nut bolts etc. complete in all respect. 50mm dia |
| 53 | SITC of Digital Type Star Delta Starter Electrical Control Feeder Panel, 100A, suitable for operation of 3-phase pump set on 415V AC supply, comprising input 100Amp. MCCB (TP), GFU with auxiliary contact for earth fault protection, 35Amp. AC-3 duty PMC based DC contactors (For Star and Main), 45Amp. 1 Pole Contactor for APSC, 25Amp. Contactor for Delta,Microprocessor based Digital Motor Protection Unit with necessary protections, RTC timer, MCBs for power and control circuits, LED indications, Heavy duty terminal connectors, complete internal wiring with copper conductors (for control and power), capacitor bank of 5 kVAR, and all necessary hardware.The panel shall be housed in outdoor type fabricated GI enclosure of 1.6 mm thickness, Complete with all standard protections, indications and automation features required for safe, efficient and reliable operation of pump sets under varying field conditions, complete in all respects as per specification and direction of Engineer-in-Charge. (Rates Are Exclusive of GST) |
| 54 | Providing & Fixing of double flanged, Cl body, ISi marked NRV of approved make of following sizes 65mm |
| 55 | Providing, lowering, laying and jointing in trenches, standard lengths HDPE ISI marked Pipes as per IS-4984: 1995 (amended up to date) with necessary jointing material like mechanical connectors, i.e. thread/ insert joint/ quick release coupler joint/ compression fitting joint or flanged joint and specials jointing pipe by electro fusion welding method, including all taxes , transportation and freight charges, inspection charges, loading/ unloading charges, stacking of pipes, including cost of labour and material, specials (Tee, bend etc.), satisfactory hydraulic testing, disinfection, commissioning etc. complete as per technical specifications and direction of Engineer-in-charge of following class and diameter. (excluding earth work) . (Rates Are Exclusive of GST)Note : Providing and fixing of all requisite specials as per drawing, design and layout are inclusive in RM measurement of the item and shall not be paid separately.Supply may be in coil or straight length in 6 M/12 M.HDPE PE-80 PN-6- 75 mm Dia. |
| 56 | Earth work in excavation by mechanical means (Hydraulic Excavator )/ manual means in trenches of required width and gradient for laying and jointing of pipe line including excavation for sockets, and dressing of sides, ramming of bottoms, depth up to 1.5 Mtr. including taking out the excavated soil, and then returning the soil as required in layers not exceeding 20cm in depth including consolidating each deposited layer by ramming, watering etc. and disposal of surplus excavated soil as directed within a lead of 50 Mtr. including required all safety provisions etc.:All kinds of soil (Rates Are Exclusive of GST) |
| 57 | Providing, lowering, aligning, fixing in position in pipe line at work site, DI D/F Resilient seated (soft seated) Sluice Valves (Gate Valves) , Vacuum tight(bubble tight), straight and pocket less body passage of approved make of following class & dia complete confirming to BS-EN-1171/ AWWA C-509 and of following specifications: Body & bonnet of Ductile cast iron of grade ... Do ... coated with minimum thickness of 250 microns inside and outside, Drilled as per IS 1538. Nut-Bolt confirming to IS:1363 and IS: 1367 (Galvanised steel) Insertion rubber of black EPDM 6mm thick. Suitable support structure as per directions of EIC, Sluice valves including all jointing & jointing material, labour, testing and commissioning along with pipe line as per Technical Specifications and as per direction of Engineer-in-charge. Note: Rates are exclusive of tail piece/ dismantling joints and earth work. (Rates Are Exclusive of GST) Manually Operated Resilient Seated Sluice Valves of Class PN 1.6 = 80 mm Dia |
| 58 | Providing and fixing of flanged/ plain ended MS Specials made from MS sheet strips of relevant IS specification of approved thickness by welding, lowering, laying, aligning, fixing in position at all level/ depths in trenches complete including all taxes, material, labour, inside lining, outside coating, testing and commissioning along with pipe line as per technical specifications and direction of Engineer-in-charge. (Rates Are Exclusive of GST) MS pipe specials up to 600mm dia (with minimum 5mm thickness sheet) Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 20, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 23, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 1 dayOct 23, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 1 dayTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender