Short dated tender - Tender For Construction & Commissioning Of Open Well At Farsaram Dogiyal Ki Dhani Sarnu Chimanji Under Dmft
Tender Value
18 Lakhs
Estimated cost
Bid Submission
23 Oct 2026
1 days left
EMD
36000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Barmer → Rajasthan
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Short dated tender - Tender for Construction & Commissioning Of Open Well At Farsaram Dogiyal Ki Dhani Sarnu Chimanji Under Dmft
BOQ
| Sl. No. | Item Description |
| 1 | PHED BSR-2023-24 Exclusive of GST |
| 2 | Earth work in excavation over areas (exceding 30cm depth, 1.5 mtr in width and I 0 SQM in plan) for construction of open well, lift up to 1.5 Mtr. including taking out the excavated soil and disposal of surplus excavated soil as directed within a lead of 50 meter.All kind of soil |
| 3 | Add extra over item No. 1 for every additional lift of I .5 Mtr. or part thereof: In All kind of soil . 1.50 to 3.00 Mtr. |
| 4 | Earth work in excavation over areas (exceeding 30cm depth, 1.5 mtr in width and 10 SQM in plan) for construction of open well, lift up to 1.5 Mtr. including taking out the excavated soil and disposal of surplus excavated soil as directed within a lead of 50 meter. Ordinary RockRates are exclusive of GST. |
| 5 | Add extra over item No. 2.39.2-4 for every additional lift of 1.5 Mtr. or part thereof : In Ordinary rock and hard rock.Rate is exclusive of GST. |
| 6 | Add 20% extra over item No. 2.39 for excavation in saturated soil where pumping or baling out of water is required, including shoring strutting where required and dewatering. |
| 7 | Reinforced cement concrete work in circular well up to required depth upto floor three level including curing, compection,finishing with rendering in cement sand mortor 1:3(1cement:3coarse sand) and making good the joints excluding the centering, shuttering and reinforcement with cement concrete mix grade M20 (1:2:4)(1cement:1.5coarse sand:3graded stone aggregate 20mm nominal size |
| 8 | Centering & Shuttering with plywood or steel sheets including struting, proping,bracing both ways with wooden members and removal of form work for superstructure up to 4.5 mtr above plinth for Walls (any thickness) including attached pilasters buttresses plinth and string course |
| 9 | Providing & fixing reinforcement for RCC work including straighting, cutting, bending, placing in position and binding (including cost of binding wire)complete in allrespect in circular well up to desired depth. Hot rolled deformed cold twisted bars. |
| 10 | P&L C.C. incl. Curing , compaction etc. complete in specified grade excl. the cost of centring & shuttering All work upto plinth level. Usiang 1:3:6 (M-10 grade) with 20mm nominal size stone aggregate. |
| 11 | Structural steel work welded in built up sections trusse and framed workincluding cutting hoisting fixing in position and appiying coat of approved steel primer all complete above plinth level up to 4.5 Mtr height in R.S. Joists flats, tees, angles and channels |
| 12 | Labour charges for horizontal boring 100 mm dia in open well in rocky strata with all types of rock cutting & drilling tools etc. including all T&P required for job including dewatering arrangement.Rate is exclusive of GST. |
| 13 | Supply & Fixing M S clamp set of 50x6 mm flat from iron with nuts and bolts etc. for holding the riser pipe assembly of submersible pump set.Rate is exclusive of GST. |
| 14 | Supply & Installation of 3 phase ISI marked submersible motor pump set of five star rating by BEE and as per JS: 8034-2011 (pump) and IS 9283-2013 (motor) or amended up to date of approved make of following duty condition with required accessories including making connection suitable for tube well/DCB. The job includes lowering of motor pump, installation of complete fitting & accessories, jointing of electrical cables up to switch board, testing of submersible pump set and interconnection up to water mains, complete in all respect. upto 5.5 KW (7.5 HP) & head up to 120 mtr |
| 15 | Supply and Fixing of electric control feeder panel comprising of suitable rating MCCB , fully automatic star-delta starter, over load relay, ampere meter with CTs, volt meter, phase preventor, suitable starting capacitors, phase indicators, lighting arrangement etc complete suitable for three phase pump set. The panel should have space for energy meter (supplied by DISCOM). All these equipments shall be housed by panel box made out from 18 guage M.S. Sheet with powder coating. Panel should be of minimum size 900 x 600 x 450 mm with Stand ( made of angle iron of size 35x35x5mm) duly bolted/screwed with enclosure box having 4 legs, each leg's length 18\\" and double door including in built locking system. The legs should be embedded in M-15 cement concrete plat form.The size of CC plateform should be equal or bigger than the base size of panel having height of at least 200 mm from ground level. The panel should have opening of suitable size in front of space for energy meter with glass for meter reading. The operation of panel should be suitable for on 440 Volt AC Supply. Above 5 HP and up to 10 HP |
| 16 | Supply & Fixing of ISi marked three core PVC flat submersible cable as per IS 694: 1990 or amended up to date and conductor as per class 5 of IS 8 130: 1980 includ ing making connection etc. 6 Sqmm 3 Core |
| 17 | 10 Sqmm 3 Core |
| 18 | Providing, installing, testing and commissioning of double flanged bulk flow meter with removable mechanism, of class B conforming to ISO 4064/1 or amended up to date of approved make including cost of all material and labour as per specifications with GI Box (sheet 16 SWG) suitable with locking arrangement of following dia.65mm Rates are exclusive of GST. |
| 19 | Providing & Fixing of double flanged, Cl body, ISi marked NR V of approved make of following sizes 65mm |
| 20 | Providing & Lowering in tube well ISI marked GI Pipe medium duty (“B\\" class), Steel tube as per IS:1239 or amended up to date and zinc coating as per IS 4736, threaded and double flanged (welded) on both ends and two number 25x3mm MS flat welded on both ends between pipe & flange, rubber washer & nut bolts etc. complete in all respect.50mm diaRates are exclusive of GST. |
| 21 | Providing supplying lowering & laying in standard lengths HDPE PE-80 PN-6 pipes conforming to IS 4984 : 1995 with necessary jointing material like mechanical connectors, i.e. thread / insert joint / quick release coupler joint/ compression fitting joint or flanged joint and specials jointing pipe by butt fusion welding method, including all taxes (Central and local) transportation and freight charges, inspection charges, loading/ unloading charges, stacking the same in closed shade duly protecting from sunrays and rains, including cost of labour and material, specials (Tee, bend etc.) satisfactory, hdraulic testing etc. complete as per technical specifications and direction of Engineer-in-charge (excluding earth work) (supply upto 90mm dia coil & above 90mm dia straight length in 6 M) Note :- Providing and fixing of all requisite specials as per drawing, design and layout are inclusive in RM measurement of the item and shall not be paid separately. 75mm dia HDPE Pipe |
| 22 | Earth work in excavation by mechanical means (Hydraulic Excavator )/ manual means in trenches for water supply pipe lines, shoring and strutting if required as per required gradient and line including safety provisions using site rails and stacking excavated stuff including up to all required lead cleaning the site etc. complete for lifts up to 1.5 depth and strata as specified. The work also includes depositing and refilling of trench with watering & ramming /compacting in layers and disposal of surplus excavated soil as directed for lead up to 50 mtr. |
| 23 | Providing, lowering, aligning, fixing in position in pipe line, CI D/F Sluice valves of approved make of following Pressure rating & dia complete, confirming to IS:14846 (amended up to date) and of following specifications: Body, Bonnet, Wedge, Gland, Thrust Plate, Cap & Hand wheel of Grey cast iron of IS:210/ FG200 Stem - SS 304 ,Body Seat ring,Wedge facing ring & Bushes - LTB2/ SS , Face to face dimensions as per IS 14846/2000 (amended up to date), All exposed machined ferrous surfaces shall be painted with one coat of aluminium red oxide primer conforming to IS:5660 and two coats of black Japan paint conforming toType B of IS 341or paint conforming to IS9862 or IS2932( Non-Toxicsuitable for drinking water) applied inside and outside, Flanges Drilled as per IS 1538.Nut-Bolt confirming to IS:1363 and IS: 1367/ CS/ galvanised steel.Insersion rubber of black EPDM 6mm thick . Suitable support structure as per directions of EIC. Sluice valves including all jointing & jointing material, labour, testing and commissioning along with pipe line as per Technical Specifications and as per direction of Engineer-incharge. Note: Rates are exclusive of tail piece/ dismantling joints and earth work Manually Operated CI Sluice valve of Class PN-1.0 Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 20, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 23, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 1 dayOct 23, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 1 dayTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender