Tender For Supply And Construction Of 02 X Tank Shed At Ferozepur
Tender Value
Ref. Documents
Estimated cost
Bid Submission
05 Nov 2026
11 days left
EMD
2.15 Lakhs
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Firozepur → Punjab
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Supply And Construction Of 02 X Tank Shed At Ferozepur
BOQ
| Sl. No. | Item Description |
| 1 | Item Rate BoQ BoQ_Ver3.0 Item Rate Normal INR Only INR Select, Excess (+), Less (-) Less (-) Tender Inviting Authority: 113 ENGINEER REGIMENT Name of Work : Supply and Construction of 02 x Tank Shed at Ferozepur Contract No: 4146/Tank Shed/02/26-27 OF 2026-27 Name of the Bidder/ Bidding Firm / Company : PRICE SCHEDULE(This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only ) NUMBER # TEXT # TEXT # NUMBER # TEXT # NUMBER NUMBER TEXT TEXT # NUMBER # TEXT# TEXT # NUMBER # NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER # NUMBER # TEXT TEXT NUMBER # NUMBER # DATE NUMBER # NUMBER # TEXT # SlNo Item Description Item Code / Make Quantity Units Estimated Rate inRs. P Addition / Deduction Addition / Deduction Values Currency Convertion against each Item Quoted Currency in INR / Other Currency BASIC RATE In Figures To be entered by the Bidder Rs. P Excise Duty VAT Freight Charges ( Unloading & Stacking) Any Other Taxes/Duties/Levies Other Taxes 2 IIIrd Party i.e DGS&D / RITES etc Inspection Charges @0.34%+Service Tax Less for Cenvat Credit,if any respect of Supplies Under full Excise Duty Category TOTAL AMOUNT Without Taxes inRs. P TOTAL AMOUNT With Taxes TOTAL AMOUNT In Words |
| 2 | Surface excavation n.exc.30cm deep and averaging 15cm deep and getting out in Soft/loose soil complete all as specified & directed. |
| 3 | Excavating over areas, n exc 1.5m deep and getting out in soft/loose soil complete all as specified & directed. |
| 4 | Material and labour for providing cement concrete in foundations 1:4:8 type D2 ( using 40mm graded stone aggregate) filling and mass concrete complete all as specified & directed |
| 5 | Material and labour for providing cement concrete as in coping and column foundation 1:2:4 type B1 ( using 20mm graded stone aggregate) complete all as specified & directed |
| 6 | Material and labour for rendering 15mm thick in cement mortar (1:6) on fair faces of brickwork or concrete surfaces, finished the surface even and smooth without using extra cement complete all as specified and directed. |
| 7 | Supply only integral water proofing liquid administure for concrete / mortar (Make: CONPLAST X421IC of Fosroc/ PLASTOCRETE PLUS OF SIKA/equivalent brand of PIDILITE) |
| 8 | Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces. |
| 9 | Material and labour for applying two coats of synthetic enamel paint on new steel surface exceeding 10 cm width or girth over a coat of red oxide primer including preperation all complete as specified and as directed . |
| 10 | Returning filling including spearding levelling watering and well ramming in layer n. exc. 25 cm in soft/loose soil copmplete all as specified & directed. |
| 11 | Removing excavated soil n.exc 50 mtr and deposited where directed at a level n.exc 1.5 m above the starting point complete all as specified . |
| 12 | M&L reinforced cement concrete M-25(design mix) in foundations, including rafts, footings,foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete , all as specified and directed.. |
| 13 | M&L reinforced cement concrete M-25(design mix) in slabs supported on walls, beamsand columns in floors, landings, balconies,canopies, deck slabs and in shelves and the like, all as specified and directed. |
| 14 | M&L formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits(if any) of foundation and plinth beams; and similar work; vertical or to batter all as specified and directed. |
| 15 | M&L formwork to sides of pillars,posts,struts,piers, columns and stanchions, all as specified and directed. |
| 16 | M&L for Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips |
| 17 | M&L Hardcore of gauge exc.63mm but not exc. 100mm ,deposited,spread and levelled in layers n.exc. 15cm thick,watered/rammed to a true surface complete all as specified and directed.. |
| 18 | Rolling and consolidating fmn surfaces in cutting with exc 8 to 12 tonne power roller to achieve compaction 95-98.5% of maximum dry density. |
| 19 | Supply and laying for 150 mm thick Granular Sub Base (GSB) compacted thickness (two layers of 150 mm thick) Grade V, spreading, rolling and levelling and rolling with 8 - 10 Tonne power roller complete all as specified directed. |
| 20 | Material and labour for Wet Mix Macadam (WMM) 150 mm thick compacted thickness spreading, rolling and levelling in two layers of 75 mm and rolling with 8 - 10 Tonne power roller. |
| 21 | Providing and laying Dry Lean Concrete (DLC) 150 mm thick having compresive strength. Minimum cement content must not be less than 140 Kg/Cum including spreding, levelling and rolling with 8 to 10 Tonne power roller. |
| 22 | Material and labour for providing 150 mm thick cement concrete 1:4:8 type D2 using 40mm graded stone aggregate as in sub base of floor complete all as specified and as directed |
| 23 | M&L for Stone sett flooring with stone setts of sze 200 to 250mm long,150 to 200 mm wide and 150 mm deep an sides dressed,bedded in cement mortar 1:3,joints 20mm thick,grouted in cement mortar 1:2 with an admixture of mettallic floor hardner 5% by weight og cement and struck flush complete all as specified and directed |
| 24 | Materials and labour for 75mm thick PCC (1:3:6) type C2 (using 40 mm graded stone aggregate) as in pavement/plinth protection , laid in bays and joints shall be filled up with bituminous gola with 80/25 bitumen ( 1 part of bitumen to be mixed with 3 part of sand and finished the surface fair and even complete all as specified & directed. |
| 25 | Supply and fix steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to IS-1161-1979 grade St-240 complete all as specified and as directed. |
| 26 | Supply and fix of pre-painting galvalume sheets having pitch 190mm, depth 29mm and not less than 0.50mm thickness having tensile strength of 550 Mpa (Galvalume base-PPGL trapezoidal profile sheets) fixed with aluminium self tapping screws of size 50/75mm and aluminium washer of suitable size in roof covering complete all as specified and as directed. |
| 27 | Electrification Items for construction of Tank Shed |
| 28 | Note: In case doubling/duplicancy of BOQ items , the lowest quoted rate shall be applicable for payment. Total in Figures 0.0 0.0 INR Zero Only 4.0 Construction of chamber for 100mm sluice plates item5 10.0 Nos Quoted Rate in Figures Select 0.0 0.0 Zero Only Quoted Rate in Words INR Zero Only Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 20, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 05, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 11 daysNov 07, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 13 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender