Tender For Special Repair Of Bldg No T-294 & T-300 (Aps) At Mil Stn Dharchula Under Ge (Mes) Pithoragarh
Tender Value
27.42 Lakhs
Estimated cost
Bid Submission
10 Nov 2026
7 days left
EMD
54840
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Pithoragarh → Uttarakhand
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Special Repair Of Bldg No T-294 & T-300 (Aps) At Mil Stn Dharchula Under Ge (Mes) Pithoragarh
BOQ
| Sl. No. | Item Description |
| 1 | DESCRIPTION OF ITEMS |
| 2 | Demolition of cement concrete in ground floor, paving nexc 15cm thick(below or above GL) complete all as specified and directed |
| 3 | M & L for 50mm thick PCC 1:3:6, type C-2, as in Plinth protection etc finished even & smooth without using extra cement including forming necessary joints 12 mm wide to the full depth of PCC at every 3 meter and at change in direction complete all as specified & directed. |
| 4 | M&L for PCC 1:4:8 type D2 (using 40mm graded aggregate) as in sub bases/ sub floors/pavings etc. complete all as specified |
| 5 | M&L for 40mm thick PCC 1:2:4 type B1 (using 20mm graded aggregate) as in floors complete all as specified |
| 6 | M&L for PCC 1:2:4 type B1 (using 20mm graded aggregate) as in in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs not provided for in Item 04028, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, as directed |
| 7 | Demolition of brick work, stone/boulder masonary built in cement mortar complete all specified and directed |
| 8 | M&L for Pre-cast cement concrete 1:3:6 type C-1 (using 20 mm graded stone aggregate) block masonry with solid blocks, exc. 10 cm in width and setting in cement mortar 1:6, complete all as specified and directed. |
| 9 | Taking down cement plaster on brick or stone walls, of any description including raking out joints, hacking for key, scrubbing down with water, etc complete all as spfd and directed. |
| 10 | M&L 15mm thick rendering in CM 1:6 on fair faces of brick work or concrete surfaces including finishing the surfaces even and smooth without using extra cement complete all as specified and directed. |
| 11 | M&L 15 mm thick rendering in CM 1:4 on fair faces of brick work or concrete surface including finishing the surfaces even and smooth without using extra cement complete all as specified and directed. |
| 12 | M&L for Preparing newly plastered wall surfaces and applying two coats of oil emulsion distemper over a coat of wall putty 1mm thick over plastered surface to prepare the surface even and smooth complete all as specified and directed. |
| 13 | M&L for Preparing newly plastered wall surfaces and applying two coats of cement base paint over a coat of primer complete all as specified and directed |
| 14 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed |
| 15 | M&L for vitrified ceramic light shade tiles/outdoor tiles 8-12mm thick (square or rectangular) polished area of each tile not exc.0 .36 sqm in floor,skiritng etc and shall be jointed in neat cement slurry and pointed in paste pigmented to tile shade complete laid over and including 15 mm thick screed bed or bedding layer in CM (1:6) complete all as specified and directed |
| 16 | M&L for non skid coloured ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11 sqm and not exceeding 0.18 sqm, in floors over and including 15mm thick screed in CM 1:6 etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shades of tiles complete all as spfd & directed |
| 17 | M&L for coloured glazed ceramic tiles in vertical surface, 350x 250x 7mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over and including10 mm thick plaster in CM 1:4 complete all as spfd & directed. |
| 18 | Taking down chowkhats or frame nexc 1.5 sqm each with shutters (without taking off shutters from the frame) complete all as specified and directed. |
| 19 | Taking down chowkhats or frame exc 1.5 sqm but nexc 4.00 sqm each with shutters (without taking off shutters from the frame) complete all as specified and directed. |
| 20 | S&F Pressed steel frames 125 x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete, as specified, supplied and fixed |
| 21 | M&L cement concrete type C1 1:3:6 (20 mm graded stone aggregate) as in filling inside pressed steel chowkhats complete all as specified and directed. |
| 22 | S&F 35 mm th Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides incl teakwood leaping to the exposed surfaces complete all as specified and directed. |
| 23 | M&L for 2nd class hardwood, 35 mm thick glazed and skeleton shutter, open rebated and prepared to receive glass, gauge, etc. divided into squares, with plain, chamfered or rounded , mitered and rebated sash bars any numbers, edges of framing plain, chamfered or rounded. fitted with cut and mitered beads for securing glass etc; size of members of shutter as specified in SSR Part I, Section 8 clause 8.24(a); supplied and fitted to chowkhat complete all as specified and directed |
| 24 | S&F for powder coated anodized aluminium frame for doors, windows ventilator with one or more rebates including joining cleat for fixing etc , screws, hinges, brackets, dash fasteners/rawl plugs etc. complete all as specified and directed. complete all as specified and directed. |
| 25 | S&F powder coated Anodised aluminium window and ventilator shutters, side hung type with sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodized aluminium snap beading, screws, anodized aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.s) suitable handle (1 no.) tower bolt (1no.) per leaf complete all as specified complete all as specified and directed. |
| 26 | S&F Anodised aluminium grill (anodized transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard sectionand fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodized aluminium standard section around the opening, all complete as per requirement and direction of Engineer in-charge. |
| 27 | S&F 4.80 mm thick sheet glass ordinary quality and glazing with oil putty/rubber packing in square exc .50 sqm in each panels complete all as specified and directed. |
| 28 | S&F Stainless steel wire cloth.0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed. |
| 29 | S&F 150 mm aluminium handles, cast type anodized complete all as specified and directed. |
| 30 | S&F150 mm aluminium anodized barrel tower bolts extruded section complete all as specified and directed |
| 31 | S&F 250mm long Aluminium alloy, anodized, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed |
| 32 | Dismantling mild steel work of any description and in any position complete all as specified and as directed. |
| 33 | S&F roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy brackets framing (beam, tee, angle channel or flat sections) (Fe-290 Gde E-165) including distance pieces, cleats etc. |
| 34 | Dismantling wall and ceiling boards (fiber, pulp, insulation etc) or insulation boards / slabs / blankets any thickness including cover fillets, fittings etc. as specified and directed. |
| 35 | S&F False Ceiling tiles vinyl laminated MPL gypsum panels size 595x595x6 to 8mm thick after lamination and Gl frame work for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/ intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre with Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified |
| 36 | M&L for 6mm thick Plywood, grade BWR, type BB, fixed in ceiling and walling with screws to timber frame work complete all as sfd and directed. |
| 37 | M&L 2nd class hard wood plain fillets square or rectangular in section clean sawn but bull nosed chamfered or rounded on one edge or face sectional area exc 3 sqcm and nexc 6 sqcm secured in nails complete all as specified and directed |
| 38 | Dismantling of timber scantling 40 sqcm and over in section in any position for unframed works complete all as specified and directed |
| 39 | M&L for 2nd class hard wood as in scantling clean sawn framed & fixed as in ceiling and walling wks, complete all spfd & directed. |
| 40 | Dismantling of timber scantling 40 Sqcm under in section in any position, fixed with nails unframed work complete all as spfd & directed. |
| 41 | M&L for 2nd class hard wood plain fillets square or rectangular in section clean sawn secured with nails sectional area exc 13 sqcm and n.exc 25 sqcm complete all as specified and directed |
| 42 | M&L for one coat of creosote oil to wooden surfaces new or old of any description including preparation of surfaces complete all as specified and directed. |
| 43 | Dismantling of plain or corrugated steel sheeting of any gauge/thickness in roof covering/wall cladding complete all as spfd and directed |
| 44 | S&F pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed. |
| 45 | S&F pre-painted galvalume aluminium zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed. |
| 46 | M&L for two coat of synthetic enamel paint over a coat of pink primer to new wooden surface of any description exc 10 cm girth or width including preparation of new wooden surfaces complete all as specified and directed |
| 47 | M & L preparing old previously treated surfaces of steel surface over 10 cm girth or width applying one coat of synthetic enamel paint on old steel surfaces complete all as specified and directed. |
| 48 | S&F in repairs vitreous china wash basin, rectangular or oval shaped with min Size 550X400mm incl 32mm size brass chromium plated waste fittings, waste pipe fixing in wall/slab/granite top incl necessary brackets and fixing arrangement complete all as specified and directed. |
| 49 | S&F in repairs 15mm dia Pillar taps, cast copper alloy, fancy type, chromium plated, screwed down high pressure, with or without lettered ‘Hot' or ‘Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed in repairs complete all as spfd & directed. |
| 50 | S&F in repairs PVC connections 15 mm size with PTMT nuts of length 600mm long fixed in repairs all as spfd and as directed. |
| 51 | S&F in repairs stop valve/angle valve, bore of dia 15mm of Chromium plated fancy type cast copper alloy screwed down for iron pipe and fixed etc complete all as specified and directed. |
| 52 | S&F in repairs Health Faucet (ABS Body) MS, Chromium plated suitable for 15mm dia pipe with 1.25 mtr long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and as directed. |
| 53 | S&F in repairs for PVC low level flushing cistern 10ltr capacity, with symphonic, action PVC float valve, brackets and 32mm bore PVC flush pipe etc as spd and fixed in repair all as specified and directed |
| 54 | S&F in repair Tubular towel rail brass chromium plated 20mm dia, D type, 60cm long between flanges complete all as specified and directed |
| 55 | S&F in repair 15mm bore Chromium plated cast copper alloy Two Way Bib Cock with Wall Flange complete all as specified and directed.(CAT part no. LYR-38041 of Jaquar or equivalent of other make) |
| 56 | S&F in repair Vitreous China Wash down water closet EWC with plastic seat cover complete all as specified and as directed . |
| 57 | S&F in repairs Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with SS chromium plated bracket guard and railing 60cm long complete all as specified |
| 58 | Supplying & fixing to walls/chases/ceilings or laying in floors Polyethylene - Aluminium polyethylene (PE-AL-PE) composite pressure pipes outer dia 16mm including all Crimp type internal sealing Plansticmetal Composite fittings (such as elbows, tees, reducers, couplers, short pieces, connectors, etc.) and hooks (in case of concealed pipe work)/ clamps (in case of exposed pipe work) complete. including taking up or down 15 mm GI tubing complete all as spfd & directed |
| 59 | Taking down carefully copper/aluminium point wiring (light, fan, socket or power) complete incl fittings such as switches, ceiling roses, pendants, regulators, sockets etc and making good disturbed surfaces of walls, floors etc all as specified. |
| 60 | M&L point wiring with 1.5 Sqmm (Nominal cross sectional area) single core PVC insulated with PVC unsheathed multi stranded copper conductor FRLS cable in open/ surface/concealed PVC conduit of suitable size, complete with all accessories/fitting, including heavy duty PVC/ABS terminal switch board floor mounted/flush type (depth not less than 45 mm) of suitable size (length X width) for mounting modular switches, Modular sockets, Modular regulators including PVC module top cover plate with frame of suitable size , brass screw and washer including unsheathed single core PVC insulated cable green in colour 1.5 Sqmm multistranded copper conductor as continuous earth wire and connecting to earth dolly complete all as specified for one light point / fan point controlled by one way switch of 5/6 Amps. |
| 61 | All as per item No. 59 above but for one 3/5 pin socket outlet point on same board controlled by one way switch of 5 Amps. |
| 62 | All as per item No. 59 above but for one 3/5 pin socket outlet point on independent board controlled by one way switch of 5 Amps. |
| 63 | M&L point wiring with 2.5 Sqmm (Nominal cross sectional area) single core PVC insulated with PVC unsheathed multi stranded copper conductor FRLS cable in open/ surface/concealed PVC conduit of suitable size, complete with all accessories/fitting, including heavy duty metal/PVC/ABS terminal switch board surface mounted/flush type to wall (depth not less than 45 mm) of suitable size (length X width) for mounting modular switches, Modular sockets, Modular regulators including PVC module top cover plate with frame of suitable size , brass screw and washer including unsheathed single core PVC insulated cable green in colour 2.5 Sqmm multistranded copper conductor as continuous earth wire and connecting to earth dolly complete all as specified for 15/16 amp socket outlet point controlled by one , one way switch of 15/16 Amps complete all as specified. |
| 64 | S&F Modular switch 1 module single pole one way 6 Amps, 240 volt complete all as specified. |
| 65 | S&F Modular switch 1 module single pole one way 16 Amps, 240 volt complete all as specified. |
| 66 | S&F Modular socket outlet, 2 module, 3 pin 5/6 Amps, 240 volt complete all as specified. |
| 67 | S&F Modular socket out let, 2 module, two in one 3 pin 5/6 Amps and 3 pin 15/16 amp , 240 volt, complete all as specified. |
| 68 | S&F ceiling rose, surface bakelite, AC, 60x30mm, 3 terminals complete all as specified. |
| 69 | S&F stepped type electronic fan regulator modular type ,2 module,240 volt complete all as specified. |
| 70 | S&F lamp holder PVC /poly carbonated type with back plate suitable for pendants /angular /batten fittings complete all as specified. |
| 71 | S&F in repairs LED tube light 4' long along with all fixtures and fittings, internally pre wired and including connecting up to ceiling rose with twin core twisted flexible copper conductor cable with suitable size, 20W complete all as specified. |
| 72 | S&F in repairs LED tube light 2' long along with all fixtures and fittings, internally pre wired and including connecting up to ceiling rose with twin core twisted flexible copper conductor cable with suitable size, 10W complete all as specified. |
| 73 | S&F LED Bulb/LED retrofit 'T' bulb 12 watts, B22 end cap complete all as specified. |
| 74 | S&F in repairs LED bldg security lights of 35 Watt having pressure die cast aluminium housing with system lumens efficacy≥100 lumen/W, IP65 protection, IK07 rating, inbuilt electronic driver with PF>0.95 and mounting on GI bracket incl connecting up with three core twisted flexible copper conductor cable complete all as specified and directed |
| 75 | Supply and fixing in replacement security light bracket made out of light grade 25 to 32mm dia GI pipe of length 0.9 mtr bend to shape and mounting on wall using clamps nut bolts etc complete all as specified and directed. |
| 76 | Supply and fixing LED luminaries 600 mm x 600 mm panel, 36 watt, 220 V AC recessed type with high efficiency PC diffuser soft glare free bright white/warm white light complete with driver, suitable for roof ceiling including connecting up with cord flexible copper conductor cable of suitable size complete all as specified. |
| 77 | S&F in repairs Energy saving, surface mounted, bulk head LED luminaries 10/12 W with Polycarbonate housing and diffuser complete including connecting up with cord flexible copper conductor cable of suitable size complete all as specified an directed. |
| 78 | S&F sheet metal enclosure for DB SPN 8 way with 200 Amps rated busbar 240 Volts, double door suitable for housing MCBs and isolators complete all as specified. |
| 79 | Supply and fixing miniature circuit breaker (MCB) of single poles and neutral (SPN) current carrying capacity 40 Amp, 240V, 10 KA 'B' curve type, in the MCB DB complete with connection testing and commissioning complete all as specified. |
| 80 | Supply and fixing miniature circuit breaker (MCB) of single poles and current carrying capacity 6 to 32 Amp, 240V, 10 KA 'B' curve type, in the MCB DB complete with connection testing and commissioning complete all as specified. |
| 81 | M&L for earthing complete with galvanised steel earth plate electrode 600x600x6.3 mm thick, buried directly in ground (earth pit not less then 2.25 metres deep below ground level) with top edge of the plate not less then 1.5 metres below normal ground level, connected to galvanised earth wire 4.0 mm dia by means of bolts, nuts, cheek nuts and washers of galvanised or iron protected by 15 mm bore GI pipe (medium grade) and connected to main switch board as directed including concrete pit in PCC (1:3:6) type C1 precast RCC (1:2:4) type B1 cover slab 40x40 Cm x 6Cm reinforced with 8 mm dia deformed bar @ 5 cm c/c with one handle for lifting made out of 8 mm dia MS bar, funnel, wire mesh, 20 mm bore GI pipe (medium grade) for watering including charcoal and salt in alternative layers necessary excavation and earth work in any type of soil and testing complete all as shown on electrical plate No-3 of SSR part-I, 2009. |
| 82 | Disconnecting electrically, taking down ceiling fan from existing position, dismantling blades, servicing by cleaning oiling /greasing, replacing unsv parts, split pins, check nuts, rubber seal etc, reassembling and re-hanging at same or new locations duly connected with new cord flexible copper conductor cable of size 23/.0076 from ceiling rose and testing complete all as specified & directed.Note: Spare parts other than specified will be measured and paid separately under respective items. |
| 83 | Rewinding of AC ceiling fan motor 1200/1400 mm sweep any make with super enamelled copper winding wire of 35SWG gauge, sleeve work, varnishing with `B' class insulation varnish, connection with flexible wire of appropriate size two core copper wire upto connector block including cutting and taking out old burnt Al/Cu winding wire complete all as specified and directed. Note : (i) Rewinding should be done at workshop |
| 84 | Supply only for fixing Ball bearing of suitable size/No for Ceiling fan of size 1200/1400mm sweep complete all as specified and directed. |
| 85 | Supply only for fixing capacitor 2.5 mfd±5%, 440 Volt, AC, 50/60Hz incl PVC clamp complete and all as specified. |
| 86 | Supply, laying commissioning, testing of XLPE under ground LT cable 1100 volts grade of size 10 Sqmm 2 core armoured, PVC sheathed with aluminium conductor heavy duty laid in trenches, fixing on wall, under road crossing through protection pipe etc complete all as specified and directed. |
| 87 | Excavation in trenches not exceeding 1.5 m wide and not exceeding 1.5 M depth in soft / loose soil and getting out complete all as specified and directed. |
| 88 | Material and labour for sand cushioning with dry fine sand including filling, spreading, levelling in layers in cable trench with approved quality of sand for protection of under ground cable complete all as specified and directed. |
| 89 | Material and labour for continuous brick edging with width equal to the depth of the brick of whole sub class 'B' bricks laid on edge complete all as specified and directed. |
| 90 | Returning, filling in excavated soil in trenches including spreading, leveling, watering and well ramming in 25mm thick layer complete all as specified and as specified. |
| 91 | Removal of surplus excavated soil to a distance exc50 m but not exc in 100 m and deposited where directed at a level exc 50 m above the starting point complete all as specified. |
| 92 | Supply / laying and fixing 40 mm bore galvanised steel tubes with all fittings, light grade, laid in trenches for cable protection complete all as specified and directed. |
| 93 | M & L for cutting the road / Floor /of any description/tiles as per requirement upto depth 30 cm and width 25 Cm to lay the GI pipe complete all as specified and directed. |
| 94 | Supply and fix exhaust fan PVC complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 300m all as specified and directed Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 19, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 10, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 7 daysNov 17, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 14 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender