Tender For special Repair/ Replacement Of Ht And Lt Xlpe Ug Cables, Pole Box Assembly, Bus Bar Chamber, Led Street Light Fitting And Connected Items At Harbaksh Stadium Under Age Sldc Under Ge(U) E/S Delhi Cantt-10
Tender Value
45.70 Lakhs
Estimated cost
Bid Submission
09 Nov 2026
17 days left
EMD
91400
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
New Delhi → Delhi
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for special Repair/ Replacement Of Ht And Lt Xlpe Ug Cables, Pole Box Assembly, Bus Bar Chamber, Led Street Light Fitting And Connected Items At Harbaksh Stadium Under Age Sldc Under Ge(U) E/S Delhi Cantt-10
BOQ
| Sl. No. | Item Description |
| 1 | Excavation in trenches not exc. 1.5 m wide and not exc 1.5 mtr deep in soft/loose soil for laying / taking up/ taking down of cables and getting out and levelling of bottom suface to required level all as specified and directed by Engineer- in- Charge. |
| 2 | Returning filling in Including spreading, levelling,. Watering and well ramming soil in layers not exceeding 25 cm thick all as specified and directed by Engineer- in- Charge. |
| 3 | Removing excavated material (ie soil) from site to a distance n. exc 50 mtrs away and depositing where directed at a level n. exc. 1.5 mtr above the starting point all as specified and directed by Engineer-in-Charge. |
| 4 | Material and labour for river washed and screened, dry sand for filling in trenches below and around underground cables for cushioning of cables etc, all as specified and directed by Engineer- in- Charge..Note : Measurement shall be taken after punning down. |
| 5 | S&F sub class B bricks having minimum compressive strength 75 Kg/ Sqcm laid in trenches for cable protection etc complete all as directed by Engineer-in-Charge. |
| 6 | All as per srl item No 5 here-in-before but using old bricks obtained under srl item No 1 complete all as specified and directed by Engineer- in- Charge. |
| 7 | M/L for GI Tubes,of size 80 mm dia light grade, galvanised, with all fitting , laid in trenches for protection of cable in road /drain crossing complete all as specified and directed by Engineer- in- Charge. |
| 8 | Boring of hole under road/pavement/hard standing or any other situation by manual means and suitable for passing of GI pipe 50 to 100 mm bore and making good both ends complete all as specified and directed by Engineer- in- Charge. |
| 9 | Disconnecting, uncoupling, taking down or carefully drawing out existing unserviceable LT cable from trenches, masonry ducts, or pipes, coiling, and removing off the site. and Supply, laying, jointing, testing and commissioning in replacement of HT underground cables 11000 volts grade, XLPE insulated, screened, PVC bedded, galvanised steel strup or wire armoured, heavy duty with aluminium conductor, IS 7098(Part -2) marked, laid in trenches complete all as specified and directed by Engineer- in- Charge. .Cables of the following sizes:- 120 Sqmm 3 Core . |
| 10 | Disconnecting, uncoupling, taking down or carefully drawing out existing unserviceable LT cable from trenches, masonry ducts, or pipes, coiling, and removing off the site and supply, laying, testing, and commissioning in replacement thereof, LT underground cable, 1100 Volt grade, cross-linked polyethylene (XLPE) insulated, PVC inner sheathed, heavy-duty galvanized steel wire/strip armoured, extruded PVC outer sheathed, with stranded aluminium conductor, bearing ISI mark conforming to IS: 7098 (Part 1), laid in trenches, ducts, or pipes, complete all as specified and directed by the Engineer-in-Charge.Notes:Excavation, earthwork, sand cushioning, protective covers/bricks/tiles, and cable jointing/termination kits shall be measured and paid separately under relevant Schedule 'A' items. |
| 11 | 16 Sqmm 4 core |
| 12 | 35 Sq mm 3.5 core. |
| 13 | 50 Sq mm 3.5 core. |
| 14 | 95 Sq mm 3.5 core. |
| 15 | 120 Sq mm 3.5 core. |
| 16 | 300 Sq mm 01 core. |
| 17 | Disconnecting existing cables, dismantling and taking down existing unserviceable steel tubular/Pcc pole of any size/length including breaking concrete foundation/muffing, handling, transporting, and supply, handling, assembling, erecting, and painting in replacement thereof, Steel Tubular Swaged Pole, Type 410 SP-31, 9.00 Metre overall length, conforming to IS: 2713 (Parts 1 to 3), including:Earthwork in excavation in any type of soil, backfilling, and ramming.Bed plate / base plate of MS flat/sheet welded or fixed at the base of the pole.Plain Cement Concrete (PCC 1:3:6, type C-2 or as specified) in foundation block and PCC 1:2:4 coping/muffing around the pole above ground level with weathered top.Medium-grade GI sleeve pipe (minimum 40 mm / 50 mm dia) conforming to IS: 1239 embedded in the foundation for cable entry/protection.Fabricated MS/GI bracket of required outreach/angle with mounting accessories suitable for street light / flood light fitting.Painting the pole and bracket with two coats of synthetic enamel paint over one coat of red oxide zinc chrome primer, including black anti-corrosive bituminous paint for the embedded portion.Complete all as specified and directed by the Engineer-in-Charge. |
| 18 | Disconnecting existing cables, uncoupling connections, dismantling and carefully taking down existing unserviceable steel tubular, or PCC pole of any size/length, including breaking existing concrete foundation/muffing, sorting, handling, transporting, and supply, handling, assembling, erecting, painting, testing, and commissioning in replacement thereof, Steel Tubular Swaged Pole, Type 410 SP-31, 9.00 Metre overall length, Swan Neck type, complete with cast iron (CI) base plate, finial, and single swan neck, conforming to IS: 2713 (Parts 1 to 3), complete all as specified and directed by the Engineer-in-Charge.NOTES:The unit rate of this item is deemed to include the cost of:- Earthwork excavation in any type of soil, backfilling around the foundation in layers not exceeding 15 cm depth, watering, ramming, and disposal of surplus soil up to a lead not exceeding 50 metres.Providing Plain Cement Concrete (PCC) 1:4:8 (Type D-2) in the pole foundation block of required design dimensions.Providing PCC 1:2:4 (Type B-1) tapered coping/muffing around the pole extending above ground level with a weathered and finished top.Supply and embedding of a medium-grade GI sleeve pipe (minimum 40 mm / 50 mm nominal bore, conforming to IS: 1239) in the foundation block for cable protection and entry into the pole. The unit rate shall also include painting:Bituminous paint applied to the entire interior length of the pole and the exterior surface up to the planting depth plus 30 cm above ground level.One shop coat of red oxide zinc chrome primer followed by two finishing coats of approved superior quality synthetic enamel paint on the exposed portion of the pole and swan neck bracket. |
| 19 | Supply and Fixing Junction box of IP67 (as per IEC 60529) Thermoplastic PC- GFS Polycarbonate Weatherproof, UV resistant due to solar radiation, Rainwater proof, temperature resistant, Flame – retardant & Self-extinguishing. Glow Wire tested at minimum 960 deg C (as per IEC 60695 – 2 – 11) Junction Box having size (205 x 255 x 112 mm) size on Pole with 1No. 10 Amp C Curve series, 10kA SP MCB i/c supply with pole mounting kit for clamping the box on pole, earthling the body connection, inter- connection, suitable terminal blocks, glands, locknut etc. complete set as reqd. for Pole lighting complete all as specified and directed by Engineer- in- Charge. |
| 20 | Supply and fixing multi core round PVC insulated copper conductor (flexible) industrial cables PVC sheathed cables, 1100 volts conforming to IS : 694 of size 2.5 Sqmm, 3 core panel to street light inside/outside pole complete all as specified and directed by Engineer- in- Charge. |
| 21 | Supply and fixing multi core round PVC insulated copper conductor (flexible) industrial cables PVC sheathed cables, 1100 volts conforming to IS : 694 of size 06 Sqmm, 3 core panel to street light inside/outside pole complete all as specified and directed by Engineer- in- Charge. |
| 22 | Supply and fixing of LED Flood lights 200 Watt made up of pressure die cast housing with toughned glass and individual high power LEDs with secondary optics, IP66 protection complete all as specified and directed by Engineer- in- Charge. |
| 23 | Supply & fixing 90 Watt LED street light fittings made up of pressure die cast housing with toughned glass and individual high power LEDs with secondary optics, IP66 protection complete all as specified and directed. Please Enable Macros to View BoQ information |
| 24 | Supply & fixing 90 Watt LED street light fittings made up of pressure die cast housing with toughned glass and individual high power LEDs with secondary optics, IP66 protection complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 19, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 09, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 17 daysNov 11, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 19 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender