Tender For Periodical Preventive / Corrective Maintenance Of Earthing, Standby Diesel Gen-Sets At Various Locations (Coast Guard) & Street Light Poles, Street Light Fittings. Timers, Junction Boxes And Other Connected Misc E/M Works At Cgdhq-10 And M
Tender Value
28.50 Lakhs
Estimated cost
Bid Submission
11 Nov 2026
10 days left
EMD
57000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Nicobars → Andaman And Nicobar Islands
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Periodical Preventive / Corrective Maintenance Of Earthing, Standby Diesel Gen-Sets At Various Locations (Coast Guard) & Street Light Poles, Street Light Fittings. Timers, Junction Boxes And Other Connected Misc E/M Works At Cgdhq-10 And Maintenance Of Centrifugal/ Monoblock & Submersible Pumpsets Including Starters And Allied Works At Pump Houses In Cgdhq-10 Under Ge C Bell Bay
BOQ
| Sl. No. | Item Description |
| 1 | Supply & Lay XLPE, insulated, armoured, heavy duty, electric cable with stranded aluminium conductors, 1100 volts grade, of size 2 Core x 6 Sqmm laid in tranches/fixing on wall/poles or passing through pipe, including connecting up with suitable glands, lugs, nuts and bolts wherever required and testing on completion, including taking down existing unserviceable cable from trenches / GI protections pipes, complete all as specified and as directed by Engineer-in-Charge of following cross sectional area:-Make : Havells / Polycab / Gloster / Finolex or equivalentNOTE for item 1.00:- Excavation, Earthwork, GI Pipe, etc. will be measured and paid under appropriate Items. |
| 2 | Description all as per Srl item No 1.00 here-in-before but, 2 Core x 10 Sqmm |
| 3 | Description all as per Srl item No 1.00 here-in-before but, 4 Core x 10 Sqmm |
| 4 | Taking out old serviceable XLPE LT cable of any size and rerouting or relaying the same complete all as specified and directed. |
| 5 | S&F of HDPE double wall corrugated pipe confirming to IS -14930 Part with IP protection IP-67 having inner dia 40 mm complete terminated up to termination end point complete all as directed by Engr-in-Charge. |
| 6 | Excavation in trenches in hard/dense soil not exceeding 1.5 meter wide and not exceeding 1.5M in depth for laying of cables and getting out of excavated material complete all as specified and directed by Engineer-in-Charge |
| 7 | Returning, filling in, including spreading, leveling, watering and well ramming in layers not exceeding 25cm thick each, excavated soil in trenches after the pipes have been laid and tested complete all as specified and directed by Engineer-in-Charge |
| 8 | Removing excavated soil to a distance not exceeding 50 meter and depositing where directed at a level not exceeding 1.50 meter above the starting point complete all as specified and directed by Engineer-in-Charge |
| 9 | M&L for road cutting by manually for laying of LT UG cable/Galvanised Iron pipe including making good to distrubed surface after the completion of work with PCC 1:2:4 type B-2 on top including levelling and cambering according to existing road surface, refilling, watering, ramming etc all as specified and as directed. |
| 10 | S&F GI pipe 50mm bore light grade with all fittings laid in trenches/on wall / on poles etc/ for protection complete all as specified and directed. |
| 11 | Taking down LED street light fitting/ LED flood light fitting of any watts and type from any height of pole/walls/high mast of any location and detecting the fault in the fitting by checking the accessories, wiring and refixing the same after repairs & incorporating the faulty spares complete all as directed by Engineer-in-Charge.Note : Spares like driver and other accessories etc will be measured and paid separately under relevant items |
| 12 | Supply only LED Driver suitable for existing upto 30 W LED light fittings complete all as specified and directed. Note for item :Drivers shall be techincally compatible for existing type of fittings & frame size shall be matched to existing fittings. |
| 13 | Description all as per item No.12.00 here-in-before but, Driver suitable for more than 30 W and upto 60 W LED light Fittings |
| 14 | Description all as per item No.12.00 here-in-before but, Driver suitable for more than 90 W and upto 150 W LED light Fittings Please Enable Macros to View BoQ information |
| 15 | Description all as per item No.12.00 here-in-before but, Driver suitable for more than 90 W and upto 150 W LED light Fittings Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 19, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 11, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 10 daysNov 13, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 12 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender