Tender For special Repair Of Bathroom And Toilet Of Bldg No E-9 At Abdul Hamid Sainik Institute Under Ge (North) Meerut Cantt
Tender Value
Ref. Documents
Estimated cost
Bid Submission
10 Nov 2026
17 days left
EMD
16000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Meerut → Uttar Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for special Repair Of Bathroom And Toilet Of Bldg No E-9 At Abdul Hamid Sainik Institute Under Ge (North) Meerut Cantt
BOQ
| Sl. No. | Item Description |
| 1 | Taking down cement plaster or cement lime plaster on stone surface/brick surfaces of walls including raking out joints hacking for key scrubbing down with water etc complete all as specified and directed. |
| 2 | Taking down chowkat or frame with shutters including fitting and fixtures area not exc 1.5 Sqm each (without taking off the shutters from the frame) including cutting holes for hold fasts and making good disturbed surface with cement mortor or PCC after fixing new frame complete all as specified and directed. |
| 3 | Taking down chowkat or frame with shutters including fitting and fixtures area exc 1.5 Sqm but not exc 4 Sqm each (without taking off the wooden shutters from the frame) including cutting holes for hold fasts and making good disturbed surface with cement mortor or PCC after fixing new chowkats complete all as specified and directed. |
| 4 | S&F Powder coated anodised aluminium frame for door, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified. |
| 5 | S&F Powder coated Anodised aluminium door shutters section weighing 0.55 kg/m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, sliding door bolt, tower bolt and anodised aluminum snap beading screws etc. complete all as specified and directed. |
| 6 | S&F 4.8mm thick glass ordinary quality, ground or obscured or frosted, on one side fixed in windows/ventilators in squares exc 0.50 Sqm in each pane complete all as specified and directed. |
| 7 | S&F, aluminium (Die cast) body, Door closer, hydraulically regulated, designation No 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80kg and fixed. complete all as specified and directed. |
| 8 | S&F Framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed. |
| 9 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 45 x 70 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. |
| 10 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid moulded flush door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/ borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as specified and as directed. (Note: stainless steel butt hinges and necessary S S crews shall be paid separately) |
| 11 | S&F 100mm long SS dash fasteners complete all as specified and directed. |
| 12 | S&F 150mm extruded aluminium alloy handles, fabricated type, anodised complete all as specified & directed |
| 13 | S&F 150mm extruded aluminium tower bolts, fabricated type, anodised complete all as specified & directed |
| 14 | S&F 100mm butt hinges, stainless steel complete all as specified and directed. |
| 15 | M&L for rendering 15 mm thick on brick or concrete on fare surfaces in cement mortar 1:4 finished using ready mix plaster bags even and smooth without using extra cement complete all as specified and as directed. |
| 16 | M&L for rendering 10mm thick in CM 1:6 on fair face of brick work or concrete surfaces finished even and smooth without using extra cement complete all as specified and directed. |
| 17 | M&L for applying 1mm thick wall care putty on walls at any height complete all as specified and directed. |
| 18 | M&L for preparation of new or previously untreated surfaces of any description over 10cm width or girth and applying two coats of plastic emulsion paint at any height complete all as specified and directed. |
| 19 | Material & Labour for preparation of new surfaces of walls and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) (Weather coat) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm complete all as specified and directed. |
| 20 | M&L for prepration of old steel surfaces of any description not otherwise described over 10 cm width or grith and applying two coat of synthetic enamel paint at any height complete all as specified and directed. |
| 21 | Demolition of cement concrete (Unreinforced) in ground floor and paving n exc 15 cm thick below or above ground level complete all as specified and directed. |
| 22 | M&L 75mm thick PCC in plinth protection and paving 1:3:6 type C-1,(20mm gradded aggregate) finishing cement concrete even and smooth in slope without using extra cement complete all as specified and directed. |
| 23 | Demolition of brick work / stone masonry built in cement mortar complete all as specified and directed. |
| 24 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable to store and rubbish off the premises complete all as specified and directed. |
| 25 | S&F Anti skid coloured ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.18Sqm but not exceeding 0.38Sqm as in floors etc. set and jointed in neat cement slurry and pointed in coloured cement to match complete all as specified and directed. |
| 26 | S&F coloured HD Glazed ceramic tiles in vertical surfaces (600x300x7mm thick) set and jointed in neat cement slurry and pointed in white or coloured cement to match as in vertical surfaces complete all as specified and directed. |
| 27 | M&L for High strength polymer modified adhesive for fixing tiles as per manufacturer directions complete all as specified and directed. |
| 28 | M&L 25 mm thick PCC 1:2:4 Type B-1 (20mm graded aggregate) as in sub-floor, sub-base, floor and pavings, etc. complete all as specified and directed |
| 29 | Dismantling of CGI/PGI Sheet fixed with screws as in roof covering complete all as specified and directed. |
| 30 | S&F Pre-painted galvalume aluminium zink coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/ Clading to wall, fixed with self tapping screws as specified complete all as specified and directed. |
| 31 | S&F Pre-painted galvalume aluminium zink coating GI based Plain steel sheet 0.50 mm lthick of an colour having tensile strength of 550 Mpa as in roof covering/ Clading to wall, Ridge and eaves board, fixed with self tapping screws as in specified complete all as specified and directed. |
| 32 | Dismantling of wall and ceiling boards (fibre,pulp, insulation, etc)or insulation boards /slabs/blankets,any thickness,including cover fillets complete all as specified and directed. |
| 33 | Providing & fixing false ceiling with semi perforated 12mm thick micro tegular edged GRG at all heights with GRG (Glass Fibre Reinforced Gypsum) false ceiling tiles of size 595 x 595mm of approved texture, design and patterns having moisture content less than 2%, humidity resistance of 99%, NRC 0.50 to 0.75 as per IS 8225:1987, Noncombustible as per BS 476(part4)-1970 and light reflectance of 85% (minimum) to be laid in true horizontal level suspended on inter-locking metal T-Grid of Hot dipped galvanized iron section of 0.33mm thick (galvanised @ 120grams per sqm including both sides) comprising of main-T runners of size 15x32mm of length 3000mm, cross-T of size 15x32mm of length 1200mm and secondary intermediate cross-T of size 15x32mm of length 600mm to form grid module of size 600x600mm suspended from ceiling using galvanised mild steel items (galvanizing @ 80 grams per sqm) i.e 50mm long, 8mm outer diameter M-6 dash fasteners, 6mm dia fully threaded hanger rod upto 1000mm length and L-shape level adjuster of size 85x85x2mm. Galvanised iron perimeter wall angle of size 24x24x0.40mm of length 3000mm to be fixed on periphery wall / partition with the help of plastic rawl plugs at 450mm centre to center and 40mm long dry wall wood screws. The work shall be carried out as per specifications, drawing and as per directions of the Engineer-in-Charge. |
| 34 | M&L for Brickwork with sub class ‘B’ bricks, straight or curved on plan exc 6m mean radius built in CM 1:6 complete all as specified and directed. |
| 35 | All as described item Ser No 34 here-in-before but except bricks(retrived from demolition of bricks) but curved on plan to any radius complete all as specified and directed. |
| 36 | Taking up or down steel tubing 15mm bore and connections, including cleaning for refixing or removal to store. complete all as specified and directed. |
| 37 | Taking up or down steel tubing 20mm bore and connections, including cleaning for refixing or removal to store. complete all as specified and directed. |
| 38 | Supplying and laying 16mm dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and directed. |
| 39 | Supplying and laying 20mm dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and directed. |
| 40 | Dismantling of old water tanks and removing to store and S&F Rotational moulded polythene water storage tanks (Cylinderical vertical with closed top) hoisted and fixed in position 1000 ltrs, including 20 mm bore Ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe or brass ferrule and fixed. (Minimum weight 20mm-210 gms) complete all as specified and directed. |
| 41 | S&F in repairs 15mm bore Ball brass valves, high pressure, with polythene float and fly nut complete, screwed for iron pipe or brass ferrule and fixed. complete all as specified and directed. |
| 42 | S&F in repairs 20mm bore Ball brass valves, high pressure, with polythene float and fly nut complete, screwed for iron pipe or brass ferrule and fixed. complete all as specified and directed. |
| 43 | S&F in repairs vitreous china wash down water closet pan one piece EWCs snow white with duraplast slim soft close seat cover size (670x355x755mm) including connection to outgoing pipe complete all as specified and directed. |
| 44 | S&F in repair, vitreous china wash down water closet pan, 'Pedestal' pattern (EWC) integral foot rest or without foot rest including jet spray, seat cover including connection to drain (or outgoing pipe) and to flushing pipe, antisyphonage pipe, etc complete all as specified and directed. |
| 45 | S&F in repairs PVC (Plastic polymer Cistern) valve less, Symphonic action type, flushing cistern of capacity 10 liters, low level, white with inlet, ball valve, manually operated with one PVC ball valve horizontal plunger type including provision of 32mm PVC flush pipe of required length and making connections complete all as specified and directed. |
| 46 | S&F in repairs Cicily Lidless Urinal (320x300x525mm) snow white flat back with integrated EFS including all acessories complete all as specified and directed. |
| 47 | S&F in repair Curved Urinal Glass Partition 900mmx450mmx10mm including brackets complete all as specified and directed. |
| 48 | S&F in repairs 550mm X 750mm LED Lighting frameless, round/rectangle of required size, Anti-Fog, wall mounted backlit mirror. Thickness 5mm, round Dimmable Touch button 6000k (Cold White) SGS approved environmental protection coper free mirror complete all as specified and directed. |
| 49 | S&F at site and on position floor mounted vanity counter made of Superior Material Quality with HDHMR (High Density High Moisture Resistant) of size 770 x 451 x 680mm /800x470x680mm including vitreous china basin on top with SS cabinet & side cabinet and soft close door & drawers of approved pattern and design, waste coupling, bottle trap with all necessary fixing arrangment complete all as specified and directed. |
| 50 | S&F in repair PVC connection 15mm size with PTMT nuts of length 600mm long complete all as specified and as directed. |
| 51 | S&F in repairs PVC connection fibre reinforced 600mm long with brass check nuts and PVC washers at both ends as specified and directed. |
| 52 | S&F in repairs Wall mixer 3-in-1 with L bend, fency type chromium plated for mixing hot & cold water screwed down for iron pipe of 15mm bore complete all as specified and directed. |
| 53 | S&F in repairs centre hole basin mixer 15mm bore, fency type, cast copper alloy, chromium plated, screwed for iron pipe and fixed complete all as specified and directed. |
| 54 | S&F in repairs 15mm dia Bib taps, long body cast copper alloy with crutch or butterfly handle, screwed down, fancy type chromium plated screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed. |
| 55 | S&F in repairs CP angle valve 15mm bore cast copper alloy fency type, chromium plated with crutch butterfly handle, screwed down and screwed for iron pipe or for brass ferrule and fixed as specified and directed. |
| 56 | S&F in repairs 15mm bore 2-way bib cock with side handle, wall flange and aerator cast copper alloy chromium plated fancy type suitable for 15mm bore iron pipe complete all as specified and directed. |
| 57 | S&F in repairs brass chromium plated shower rose of size 200mm x 200mm with 600mm long chromium plated square arm with or without swivel joints, any size, including fixing to steel pipe or union complete all as specified and directed. |
| 58 | S&F in repairs toilet paper holder chromium plated or stainless steel with flat recessed type stainless steel fixed to walls with chromium plated (CP) brass screws complete all as specified and directed. |
| 59 | S&F in repairs sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and directed. |
| 60 | S&F in repairs Health faucet (ABS Body) chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and directed. |
| 61 | S&F in repairs stainless steel soap dish, any type, fixed to plugs with chromium plated brass screws complete all as specified and directed. |
| 62 | S&F in repairs Brass Butter Fly Jet Spray with 1.2 meter Long Flexible Tube of premium quality fittled to Vitreous china, wash down water closet pan, Stop cock/ angle cock all as specfied and directed. |
| 63 | S&F in repairs stainless steel towel rack with rail and hooks of modular size complete all as specified and directed. |
| 64 | S&F in repairs acrylic bathroom corner of size 12\\"x12\\" fixed to plugs with chromium plated brass screws complete all as specified and directed. |
| 65 | Taking down eaves gutters and rain water pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc (measured overall as fixed along the centre line over fittings and accessories) complete all as specified and directed |
| 66 | S&F 110mm bore PVC (SWR) pipes in any length with rubber ring joints fixed to walls including clamps complete all as specified and directed. |
| 67 | S&F 110mm bore PVC (SWR) pipes in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed. |
| 68 | S&F 75mm bore PVC (SWR) pipes in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed. |
| 69 | S&F in repair 75mm bore PVC (SWR) bends any radius complete all as specified and directed. |
| 70 | S&F in repair 110 mm bore PVC (SWR), junction single, (single T), equal or unequal with access door complete all as specified and directed. |
| 71 | S&F in repair PVC (SWR) reducers of 110 mm bore complete all as specified and directed. |
| 72 | S&F in repair 75 mm bore PVC (SWR), junction single, (single T), equal or unequal with access door complete all as specified and directed. |
| 73 | S&F in repair 110mm bore PVC (SWR) bends any radius complete all as specified and directed. |
| 74 | S&F in repair PVC (SWR) cowl, 110 mm bore complete all as specified and directed. |
| 75 | S&F in repairs stainless steel grating 100 mm dia with/without waste hole over floor/Nani trap complete all as specified and directed. |
| 76 | S&F in repairs 140mm floor door stopper of aluminium alloy body and tonge, anodised with hard drawn steel spring complete all as specified and directed. |
| 77 | S&F in repairs PVC (SWR) gully trap 125/110 mm setting and jointing with solvent cement complete all as specified and directed. |
| 78 | Taking down carefully copper/aluminium point wiring (light, fan, socket or power) complete, including fixtures and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit and making good disturbed surfaces of walls, floors, etc. complete all as specified and directed. |
| 79 | M&L for point wiring with 1.5 Sqmm (nominal cross section area) single core, multi stranded PVC insulated, unsheathed copper conductor, FRLS cable in and including in rigid pvc conduit 20 mm dia or higher medium grade ISI marked complete with all steel conduit accessories / fittings and sunk pressed steel terminal switch boxes with 3 mm thick plastic laminated hard glossy surface sheet top cover, including earth wire continuous of PVC insulated, unsheathed 1.5 Sqmm copper conductor, PVC insulated connected to all fittings, sunken boxes and common earth, earth dolly. Plastic sheet screwed with brass screws, cup washers complete all as specified and directed for the following: (a) One light/exhaust/ fan point controlled by one, one way switches 5/6 Amps. |
| 80 | Al l as described item Ser No 79 here-in-before One 3 pin 5/6 Amps socket outet point on independent board, controlled by one, one way 5/6 Amps switch. complete all as specified and directed. |
| 81 | All as described item Ser No 79 here-in-before One 3 pin 5/6 Amps socket outet point on same board, controlled by one, one way 5/6 Amps switch. complete all as specified and directed. |
| 82 | All as described item Ser No 79 here-in-before but with 2.5 sqmm for One 3 pin 16 amps socket outlet point controlled by one 16 amps switch on on independant board. complete all as specified and directed. |
| 83 | S&F Modular Switch, 1 module, 10A, AC, 240V, one way ISI Marked complete all as specified and directed.. |
| 84 | S&F Modular Socket, 2 module, 10A, 3 pin combined, AC, 240V, ISI Marked complete all as specified and directed.. |
| 85 | S&F Modular Switch, 1 module, 16A, AC, 240V, one way ISI Marked complete all as specified and directed.. |
| 86 | S&F Modular Socket, 2 module, 10A / 16A, 3/5 pin combined, AC, 240V, ISI Marked complete all as specified and directed.. |
| 87 | S & F ceiling rose, surface type, bakelite, 65 x 50 mm, three terminal complete all as specified and directed. |
| 88 | S&F in repairs lamp holder, angular/ straight ,PVC / Polycarbonate type with batten back plate, AC, 240V, Pin type, ISI marked complete all as specified and directed.. |
| 89 | Supply & fix LED lamp 9 W 6500k,240V complete all as directed. |
| 90 | S & F 20 W surface / wall mounted, 4 feet LED having PC diffuser, luminous efficacy of ≥100 lumen/W, CRI > 80, PF > 0.9, CCT 6500K/3000k, independent isolated SMPS based constant current electronic LED driver with THD < 20%, surge voltage protection 4kA, input voltage range 140 270 V, input frequency 50 60 Hz, including electrical connection with flexible Cu conductor cable of appropriate size from ceiling rose to the fixture complete all as specified and directed by the engineerincharge. |
| 91 | M&L for Building security light fitting 1 x 35 LED type, drawn through and including GI bracket of size 25 mm dia bore light grade 1.4 mtr long, bend to shape including MS clamps made out of flat iron of size 32 x 4 mm 02 Nos and necessary nuts, bolts, washer as required complete all as specified and directed. |
| 92 | S&F Exhaust fan steel body AC single phase 230/240V size 250 mm sweep with blades, and louvers complete all as specified and directed.Note-Old Exhaust fan deposited to MES EM yard. |
| 93 | Supply and fix sheet metal enclosure single pole & neutral for 240 volts 4 way with 200 Amp rated bus bar flush /surface mounting double door. complete all as specified and directed. |
| 94 | S & F in repairs replacement of MCB SPN 240 volt any rating from 6 to 40 amps conforming to IS 8828 of 1996, with rupturing capacity 10 KA ,inculding providing thimble for out going cable complete all as specified & directed. |
| 95 | Supply and fixing MCB, SP, AC, 240 volts \\"C\\" series capacity of 06 to 32Amps, 10kA and making connections complete all as specified & directed. |
| 96 | Supply and fix electric water heater, storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, connection piece etc. |
| 97 | M/L for Earthing complete with galvanised steel earth plate electrode 600x600x6mm thick, buried directly in ground (earth pit not less than 2.25 Mtr deep below ground level) with top edge of the plate not less than 1.5 mtr below normal ground level, connected to galvanised earth lead wite 4.0 mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No 3 connected to earthing test point all as specifiied or indicated including testing on completion. |
| 98 | S & F and grouting in wall sheet metal enclosure factory fabricated with single pole & neutral with a two pin and earth plug top and socket complete with one single pole MCB 20 Amps 240 volts. complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 19, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 10, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 17 daysNov 17, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 24 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender