Tender For Procurement Of Key Materials For Mgnrega/Vbgramg Works For The Year 2026-27.
Tender Value
2.27 Lakhs
Estimated cost
Bid Submission
26 Oct 2026
1 days left
EMD
15000
Bank guarantee accepted
Document Fee
600
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Ramban → Jammu and Kashmir
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Procurement Of Key Materials For Mgnrega/Vbgramg Works For The Year 2026-27.
BOQ
| Sl. No. | Item Description |
| 1 | 6 mm thick multipurpose cement bonded wood particle board conforming to IS : 14276 |
| 2 | 8 mm thick multipurpose cement bonded wood particle board conforming to IS : 14276 |
| 3 | Brick Aggregate (single size):63 mm nominal size |
| 4 | Brick Aggregate (single size):50 mm nominal size |
| 5 | Brick Aggregate (single size):40 mm nominal size |
| 6 | Stone Aggregate(single size):63 mm nominal size |
| 7 | Stone Aggregate(single size):50 mm nominal size |
| 8 | Stone Aggregate(single size): 40 mm nominal size |
| 9 | Stone Aggregate(single size):25 mm nominal size |
| 10 | Stone Aggregate(single size):20 mm nominal size |
| 11 | Stone Aggregate(single size): 12.5 mm nominal size |
| 12 | Stone Aggregate(single size): 10 mm nominal size |
| 13 | Stone Aggregate(single size): 06 mm nominal size |
| 14 | Safeda ballies 125 mm diameter |
| 15 | Cowdung |
| 16 | Bajiri |
| 17 | Bamboo 25 mm dia 2.5 meter long |
| 18 | Brick bats |
| 19 | Wire brush |
| 20 | Soft brush |
| 21 | Portland Cement |
| 22 | White cement |
| 23 | Plastic sheath,1.25 mm thick for dowel bars |
| 24 | Coal (steam) |
| 25 | Sealant primer |
| 26 | Cramp Gun metal 25x6x300 mm |
| 27 | Pre moulded joint filler, 25mm thick for expansion joint |
| 28 | Bright finished or black enameled mild steel butt hinges 125x65x2.12 mm |
| 29 | Bright finished or black enameled mild steel butt hinges 100x58x1.90 mm |
| 30 | Bright finished or black enameled mild steel butt hinges 75x47x1.70 mm |
| 31 | Bright finished or black enameled mild steel butt hinges 50x37x1.50 mm |
| 32 | Nickel plated bright finished mild steel piano hinges 1 mm thick 25 mm wide |
| 33 | Bright finished or black enameled mild steel screws 40 mm |
| 34 | Bright finished or black enameled mild steel screws 20 mm |
| 35 | Decorative type Louvers (upto 0.20 sqm) in Block board construction flush door |
| 36 | Rebate cutting in Block board construction flush door |
| 37 | Decorative plywood 4 mm |
| 38 | Fuel wood |
| 39 | Calcium silicate base compound for jointing calcium silicate tiles |
| 40 | Acrylic distemper Ist quality, having VOC content less than 50 gm/litre |
| 41 | Acrylic emulsion, having VOC content less than 50 gm/litre |
| 42 | Premium acrylic emulsion of interior grade, having VOC content less than 50 gm/litre |
| 43 | Ready mixed pink or grey primer on wood work(hard and softwood) having VOC content less than 50 gms/litre |
| 44 | Ready mixed red oxide zinc chromatic on steel/ iron work, having VOC content less than 250 gms/litre |
| 45 | Water thinnable cement primer for interior wall surface, having VOC content less than 50 gms/litre |
| 46 | Exterior primer |
| 47 | Moorum |
| 48 | Mud (dry) |
| 49 | Dry distemper |
| 50 | Oil bound washable distemper/ Acrylic distemper |
| 51 | Linseed oil (double boiled) |
| 52 | Cement Primer |
| 53 | Distemper primer |
| 54 | Pink primer (for wood) |
| 55 | White cement based putty |
| 56 | Aluminium paint |
| 57 | Enamel paint |
| 58 | Floor enamel paint in all shades except green |
| 59 | Synthetic enamel paint in black or chocolate shade |
| 60 | Synthetic enamel paint in all shades except black or chocolate shade |
| 61 | Plastic emulsion paint |
| 62 | Roofing paint for iron sheets in red colour |
| 63 | water proofing cement paint |
| 64 | Oil type wood preservative |
| 65 | Putty for wood work |
| 66 | Plaster or paris |
| 67 | Copper pins 6 mm dia 7.5 cm long |
| 68 | Black colour dark shade pigment |
| 69 | Green or blue medium shade pigment |
| 70 | Standard holder bat clamps for sand cast iron or cast iron pipes 150 mm dia |
| 71 | Royalty for good earth |
| 72 | Coarse sand (zone III) |
| 73 | Fine sand (zone IV) |
| 74 | Galvanised steel plain sheets |
| 75 | Mild steel round bar 12 mm dia and below |
| 76 | Mild Steel round bar above 12 mm dia |
| 77 | Average rate of mild steel round bars for reinforcements |
| 78 | Twisted steel/deformed bars |
| 79 | Mild steel square bars |
| 80 | Structural steel such as tees, angles, channels andR.S. joists |
| 81 | Flats up to 10 mm in thickness |
| 82 | Flats exceeding 10 mm in thickness |
| 83 | Mild steel plates |
| 84 | Steel glazed door, window/ ventilator, all members viz, F7D, F4B, K11 and K12B etc. |
| 85 | Mild steel rivets |
| 86 | Hard drawn steel wire fabric |
| 87 | Galvanised steel bolts & nuts 6 mm dia and 25 mm long round head with slots |
| 88 | Galvanised steel J or L hooks 8 mm dia |
| 89 | Galvanished steel bolts & nuts 10 mm dia and 125 mm long round head with slots |
| 90 | Mild steel bolts 6 mm dia and 25 mm long with hexagonal head |
| 91 | Straining bolts |
| 92 | Galvanished steel barbed wire |
| 93 | Galvanised steel turn buckles |
| 94 | Galvanised steel bolts & nuts 10 mm dia and 27 cm long both sides threaded with 4 galvanised steel nuts |
| 95 | Galvanised steel bolts 10 mm dia and 7 cm long with nuts |
| 96 | Bolts and nuts up to 300 mm in length |
| 97 | Bolts and nuts above 300 mm in length |
| 98 | Iron pintels including weldded pin |
| 99 | Through and bond stone size 24 x 24 x 39cm |
| 100 | Stone for masonry work |
| 101 | Stone for pitching 15 cm x 22.5 cm |
| 102 | Stone dust |
| 103 | Kota stone slab 20 mm to 25 mm thick (semi-polished) |
| 104 | Stone grit 6 mm and down size or pea sized gravel |
| 105 | Crushed stone 2.36 mm to 12.5 mm size |
| 106 | Surkhi |
| 107 | Second class deodar wood in planks |
| 108 | First class kail wood in planks |
| 109 | Second class kail wood in scantling |
| 110 | Second class kail wood in planks |
| 111 | Sal wood in scantling |
| 112 | Precast terrazzo tiles 22 mm thick (light shade) |
| 113 | Precast terrazzo tiles 22 mm thick (medium shade) |
| 114 | Precast terrazzo tiles 22 mm thick (dark shade) |
| 115 | Precast heat resistant terrance tiles (size 300x300 mm) and 20 mm thick |
| 116 | G.I Limpet washer |
| 117 | Bitumen washer |
| 118 | G.I. Plain washer thick |
| 119 | G.I. Plain washer thin |
| 120 | G.I. Plain washer for seam bolts |
| 121 | Water proofing materials |
| 122 | Welding by gas plant |
| 123 | Welding by electric plant |
| 124 | Whiting |
| 125 | Wire nails |
| 126 | Wire mesh (rabbit) |
| 127 | 20 mm dia holding down bolts |
| 128 | Mild steel sheets with bolts and nuts to rest on pintels |
| 129 | Hard drawn steel wire |
| 130 | Mild steel flat strap fitting |
| 131 | Chequered terrazzo tiles 22 mm thick (light shade) |
| 132 | Chequered terrazzo tiles 22 mm thick (medium shade) |
| 133 | Chequered terrazzo tiles 22 mm thick (dark shade) |
| 134 | Extra for selected planks of second class teakwood |
| 135 | Diesel oil |
| 136 | Bleaching powder |
| 137 | Common burnt clay F.P.S. (non modular) bricks tile class designation 10 |
| 138 | Float glass sheet of nominal thickness 4 mm (weight not less than 10 kg/sqm) |
| 139 | Float glass sheet of nominla thickness 5.5 mm (weight not less than 13.50 Kg/ sqm) |
| 140 | Play wood 5 play with commericila ply on both faces 6 mm thick |
| 141 | 12 mm commercial ply |
| 142 | 18 mm thick block board with commercial ply veneering on both side |
| 143 | 21 mm thick clear toughened Laminated glass for fins with holes |
| 144 | Common burnt clay F.P.S. (non modular) bricks class designation 7.5 |
| 145 | Stone Aggregate (single size) : 80 mm nominal size |
| 146 | Stone chippings/ screenings 4.75 mm nominla size |
| 147 | Stone chippings/ screenings 150 micron nominal size |
| 148 | Over burnt (Jhama) Brick Aggregate: 120 mm to 40 mm size |
| 149 | Stone chippings/screenings 12.5/13.2 mm nominal size |
| 150 | Stone Chippings/ screenings 10/ 11.2 mm nominal size |
| 151 | Solvent |
| 152 | Galvanised steel corrugated sheets |
| 153 | Mild steel tubes hot finished welded type |
| 154 | Mild steel tubes hot finished seamless type |
| 155 | Aluminium primer |
| 156 | Red oxide Zinc chromate primer |
| 157 | Galvanised wire mesh of average width of aperture1.4 and nominal dia. of wire 0.63 mm |
| 158 | Precast chequered cement tiles 22 mm thick Dark shade using ordinary cement |
| 159 | Epoxy paint |
| 160 | Granite of any colour, 18 mm thick (slab area upto 0.50 sqm) |
| 161 | Granite of any colour, 18 mm thick (slab area above 0.50 sqm) |
| 162 | wall form panel 1250x500 mm |
| 163 | Tie bolt 12 mm dia 100 mm length |
| 164 | Tie bolt 12 mm dia 150 mm length |
| 165 | Tie bolt 20 mm dia 150 mm length |
| 166 | Tile bolt 20 mm dia 225 mm length |
| 167 | Spring coil 12 mm |
| 168 | Plastic cone 12 mm dia |
| 169 | Corner angle 45x45x5 mm 1.50 m long |
| 170 | 100 mm channel shoulder 2.5 m long |
| 171 | Double clip (bridge clip) |
| 172 | Single clip |
| 173 | M.S. Tube 40 mm dia |
| 174 | Wall form panel 1250x450xmm |
| 175 | Corner angle 45x45x5 mm 2.50 long |
| 176 | Column clamp 450x1070 mm |
| 177 | Prop 2 m (2-3.5m) |
| 178 | Binding wire |
| 179 | Glass sheet (pin headed ) 4 mm thick |
| 180 | Ceramic Glazed Tiles Ist quality minimum thickness 5 mm in all colours shades and designs except burgundy, bottle green black |
| 181 | Ceramic Glazed Tiles Ist quality 300 x 300 mm in all shades and designs of White, Ivory, grey, Fume Red brown etc. |
| 182 | Ceramic Glazed Tiles Ist quality 300 x 300 mm in all shades designs except White, Ivory, Fume Red Brown etc. |
| 183 | Rectified - Ceramic Glazed Tiles Ist quality 300 x 300 mm or more in all shades designs White, Ivory, Grey, Fume Red Brown etc |
| 184 | Rectified - Ceramic Glazed Tiles Ist quality 300 x 300 mm or more in all shades designs except White, Ivory, Grey, Fume Red Brown etc |
| 185 | Vitrified floor tile 50x50 cm |
| 186 | Vitrified floor tile 60x60 cm |
| 187 | Vitrifies floor tile 80x80 cm |
| 188 | Interlocking C.C. paver block (60 mm thick, M-30) |
| 189 | Sundries Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 20, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 26, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 1 dayOct 27, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 2 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender