Bids Are invited for Facility Management Services - Lumpsum Based - Compressor Station, Sv And Rr Station And Residential Township; Amc For Civil Maintenance Works At Gail Compressor Station, Township And Sv Rr Station Under Jhabua Jurisdiction For C

Sharing tender

Bids Are invited for Facility Management Services - Lumpsum Based - Compressor Station, Sv And Rr Station And Residential Township; Amc For Civil Maintenance Works At Gail Compressor Station, Township And Sv Rr Station Under Jhabua Jurisdiction For Contract Period Of T.. - Providing Equipments - Excavator Cum Loader - Jcb (1400 Kg Bucket / 1.1 Cum Loader Capacity) Hydraulic Excavator (3D) On Rental Including Operator,Consumables And Fuel And Transportation Etc Complete On Day (8 Hrs) Basis (Time Considered For Payment Purpose Shall Be Equipment Availability Time At Site Excluding Transportation / Breakdown Time If Any) As Per Direction Of Eic. , Providing Tractor Trolley Of Standard Capacity Or More For Loading & Unloading The Articles, Necessary Operators, Labourers And Fuel Etc. For Carriage /Disposal Of Material Or Other Purposes Within/Around Premises Of Township Of Any Lead As Directed By Eic. , Supply Of Stone Aggregate - 12.50-20Mm , Portland Cement (Opc-43 Grade) , Supply Of White Cement. , Supply Of Brass Tower Bolt-200X10mm , Supply Of Brass Handles-125With Plate 175X32 Mm , Supply Of Brass Mortice Latch And Lock-100X65mm With 6 Levers And Pair Of Brass Lever Handles With Isi Mark. , C.P. Brass Extension Nipple (1/2X2 Size) , Anodised Aluminium Tower Bolt (Barrel Type) 200X10 Mm , Anodised Aluminium Handles 75Mm With Plate 125 X 32 Mm , Rolling Shutter Made Of 80X1.25 Mm Machine Rolled Laths , 27.5 Cm Long Wire Spring Grade No. 2 For Rolling Shutters , Supply Of Coarse Sand , Supply Of Water Proofing Materials , C.I. Cover Without Frame 300X300 Mm Inside I/C Cover Of 4.50 Kg , Rectangular Cover 455X610 Mm With Frame (Low Duty) , 500 Mm Dia Cover With Frame (Medium Duty) , S.S / C.I / P.T.M.T Square Grating Of Required Size , Shower Rose C.P. Brass For 15 To 20 Mm Inlet 150 Mm Dia , C.P. Brass Toilet Paper Holder Of Standard Size , C.P. Brass Waste 32Mm/40 Mm , Supplying And Spreading Of Good Earth At Site Including Roylty And Carrage(Earth Measured In Stacks Will Be Reduced 20 %For Payment) , Ply Wood 5 Ply With Commercial Ply On Both Faces 6 Mm Thick , 12 Mm Commercial Ply - Centuryply Or Equivalent , 18 Mm Thick Block Board With Commercial Ply Veneering On Both Side - Centuryply Or Equivalent , Supply Of Common Burnt Clay F.P.S. (Non Modular) Bricks Class Designation 7.5 , Vitreous China Flat Back Wash Basin Of Required Size. , Dash Fastener / Chemical Fastener , Supply Of Gi Wire Mesh Of Average Width Of Aperture 1.4Mm & Nominal Dia Of Wire-0.63Mm. , Semi Rigid Pvc Waste Pipe For Sink And Wash Basin 32 Mm Dia With Length Not Less Than 700 Mm I/C Pvc Waste Fittings. , Bottle Trap (32Mm Nominal Bore) , S.S / C.I. Circular Grating Of Required Size , Cpvc / U-Pvc Pipes (Working Pressure 4 Kg / Cm²) Single Socketed Pipe 75 Mm Dia , Cpvc / U-Pvc Pipes (Working Pressure 4 Kg / Cm²) Single Socketed Pipe 100-110 Mm Dia , Cpvc / Upvc Bend 87.5° 75 Mm Bend , Cpvc / Upvc Bend 87.5° 100-110 Mm Bend , C.P. Brass Long Nose Bibcock 15 Mm , Flushing Cistern P.V.C. 10 Litre Capacity (Low Level) (White) (With Fittings, Accessories And Flush Pipe) , Ptmt Swiveling Shower 15 Mm , Ptmt - Towel Rail (600 Mm Long) , Ptmt Shelf (Wash Basin) , Ptmt Soap Dish/Holder , Water Supply Tanker Of 5000 Litre Capacity , Supply Of Water Proof Ply - 12Mm Thick , 1.0 Mm Thick Decorative Laminated Sheet , Carriage Earth By Mechanical Transport - 5Km Lead , Earth Work In Excavation By Mechanical Means (Hydraulic Excavator) / Manual Means In Foundation Trenches Or Drains (Not Exceeding 1.5 M In Width Or 10 Sqm On Plan), Including Dressing Of Sides And Ramming Of Bottoms, Lift Upto 1.5 M, Including Getting Out The Excavated Soil And Disposal Of Surplus Excavated Soil As Directed, Within A Lead Of 50 M. All Kinds Of Soil. , Filling Available Excavated Earth (Excluding Rock) In Trenches, Plinth Sides Of Foundations Etc., In Layers Not Exceeding 20Cm In Depth: Consolidating Each Deposited Layer By Ramming And Watering Lead Upto 50M And Lift Upto 1.5 M. , Supply And Filling In Plinth With River Sand Under Floors Including, Watering Raining Consolidating And Dressing , Surface Dressing Of The Ground Including Removing Vegetation And In-Equalities Not Exceeding 15 Cm Deep And Disposal Of Rubbish, Lead Upto 50M And Lift Upto 1.5M. (For All Kinds Of Soil) , Clearing Jungle Including Uprooting Of Rank Vegetation, Grass, Brush Wood, Trees, Saplings And Removal Rubbish Upto The Outer Side Of Boundary Wall Of The Premises As Directed By Eic. , Providing And Laying Cement Concrete In Position Of Specified Grade Excluding The Cost Of Centring And Shuttering In The Mix - All Work Upto Plinth Level. 1:4:8 (1 Cement : 4 Coarse Sand : 8 Graded Stone Aggregate 40Mm Nominal Size) , Providing And Laying Cement Concrete In Position Of Specified Grade Excluding The Cost Of Centring And Shuttering In The Mix - All Work Upto Plinth Level.1:2:4 (1 Cement : 2 Coarse Sand : 4 Graded Stone Aggregate 20Mm Nominal Size). , Providing And Laying Cement Concrete In Position Of Specified Grade Excluding The Cost Of Centring And Shuttering In The Mix - All Work Upto Plinth Level. 1:3:6 (1 Cement : 3 Coarse Sand : 6 Graded Stone Aggregate 40Mm Nominal Size) , Providing And Laying Cement Concrete In Retaining Walls, Walls (Any Thickness) Including Attached Plasters, Columns, Piers, Abutments, Pillars, Posts, Struts, Buttresses, String Or Lacing Courses, Parapets, Coping, Bed Blocks, Anchor Blocks, Plain Window Sills, Fillets, Sunken Floor Etc., Up To Floor Five Level, Excluding The Cost Of Centering, Shuttering And Finishing: 1:1½:3 (1 Cement : 1½ Coarse Sand (Zone-Iii) : 3 Graded Stone Aggregate 20 Mm Nominal Size). , Centering And Shuttering Including Strutting, Propping Etc. And Removal Of Formwork From Foundation, Footings, Columns Etc For Mass Concreting. , Reinforcement For R.C.C. Work Including Straightening, Cutting, Bending, Binding And Placing In Position Cold Twisted Bars/ Deformed Bars. , Brick Work With Common Burnt Clay F.P.S. (Non Modular) Bricks Of Class Designation 7.5 In Foundation And Plinth In: Cement Mortar 1:6 (1 Cement : 6 Coarse Sand) , Brick Work With Common Burnt Clay F.P.S. (Non Modular) Bricks Of Class Designation 7.5 In Superstructure Above Plinth Level Up To Floor V Level In All Shapes And Sizes In : Cement Mortar 1:6 (1 Cement : 6 Coarse Sand) , Half Brick Masonry With Common Burnt Clay F.P.S. (Non Modular) Bricks Of Class Designation 7.5 In Superstructure Above Plinth Level Up To Floor V Level. Cement Mortar 1:4 (1 Cement :4 Coarse Sand) , Extra For Half Brick Masonry In Superstructure, Above Floor V Level For Every Four Floors Or Part Thereof By Mechanical Means. , Extra For Providing And Placing In Position 2 Nos 6Mm Dia. M.S. Bars At Every Third Course Of Half Brick Masonry. , Random Rubble Masonry With Hard Stone In Foundation And Plinth Including Levelling Up With Cement Concrete 1:6:12 (1 Cement : 6 Coarse Sand : 12 Graded Stone Aggregate 20Mm Nominal Size) At Plinth Level With: Cement Mortar 1:6 (1 Cement : 6 Coarse Sand) , Providing Edge Moulding To18 Mm Thick Granite Stone Counters,Vanities Etc. I/C Machine Polishing To Edge To Give High Gloss Finfish Etc.Complete As Per Approved By Eic. Granite Work , Mirror Polishing On Marble Work/Granite Work/Stone Work Wherever Required To Give High Gloss Finish. , Stonework For Wall Lining Etc (Veneer Work) Over 12 Mm Thick Bed Of Cement Lime Mortar(1:1:6 (1 Cement : 1 Lime Putty : 6 Fine Sand) Including Pointing In White Cement Mortar 1:2 (1 White Cement : 2 Stone Dust) With An Admixture Of Pigment Matching The Stone Shade (To Be Secured To The Backing By Means Of Cr S Which Shall Be Paid For Seperately) 40Mm Thick. , Providing And Fixing 1St Quality Ceramic Glazed Wall Tiles Conforming To Is: 15622 (Thickness To Be Specified By The Manufacturer), Of Approved Make, In All Colours, Shades Except Burgundy, Bottle Green, Black Of Any Size As Approved By Engineer-In-Charge, In Skirting, Risers Of Steps And Dados, Over 12 Mm Thick Bed Of Cement Mortar 1:3 (1 Cement : 3 Coarse Sand) And Jointing With Grey Cement Slurry @ 3.3Kg Per Sqm, Including Pointing In White Cement Mixed With Pigment Of Matching Shade , Providing Wood Work In Frames Of Doors, Windows, Clerestory Windowsand Other Frames, Wrought Framed And Fixed In Position With Hold Fast Lugs Or With Dash Fasteners Of Required Dia & Length (Hold Fast Lugs Or Dash Fastener Shall Be Paid For Separately). Second Class Teak Wood , Providing And Fixing Panelled Or Panelled And Glazed Shutters For Doors, Windows And Clerestory Windows Fixing With Butt Hinges Of Required Size With Necessary Screws, Excluding Panelling Which Will Be Paid For Separately, As Per Direction Of Engineer-In-Charge. (Note:-Butt Hinges And Necessary Screws Shall Be Paid Separately) Second Class Teak Wood 35 Mm Thick Shutters , Renewing Float/Plain Glass Panes - 4Mm Thick , Providing And Fixing Pre-Laminated Flat Pressed 3 Layer (Medium Density) Particle Board Or Graded Wood Particle Board Is : 3087 Marked, With One Side Decorative And Other Side Balancing Lamination Grade I, Type Ii Exterior Grade Is : 12823 Marked, In Shelves With Screws And Fittings Wherever Required, Edges To Be Painted With Polyurethane Primer (Fittings To Be Paid Separately). 18 Mm Thick , Providing And Fixing Isi Marked Flush Door Shutters Decorative Type, Core Block Board Construction With Frame Of First Class Hard Wood And Well Matched 3Mm Commercial Ply Veneering With Vertical Grains Or Corss Bands And Face Veneers On Both Faces Of Shutters - 35 Mm Thick Including Isi Marked Ss Butt Hinges With Necessary Screws , Providing And Fixing Isi Marked Flush Door Shutters Conforming To Is : 2202 (Part I) Decorative Type, Core Of Block Board Construction With Frame Of 1St Class Hard Wood And Well Matched Teak 3 Ply Veneering With Vertical Grains Or Cross Bands And Face Veneers On Both Faces Of Shutters.25 Mm Thick (For Cupboard) Including Isi Marked Nickel Plated Bright Finished M.S. Piano Hinges Is : 3818 Marked With Necessary Screws , Providing And Fixing Wire Gauge Shutters Using Galvanized M.S. Wire Gauge Of Average Width Of Aperture 1.4 Mm In Both Directions With Wire Of Dia 0.63 Mm, For Doors, Windows And Clerestory Windows With Hinges And Necessary Screws : 35 Mm Thick Shutters With Isi Marked M.S. Pressed Butt Hinges Bright Finished Of Required Size. Second Class Teak Wood , Providing And Fixing Teak Wood Lipping Of Required Size In Windows & Doors , Providing And Fixing Nickel Plated M.S. Pipe Curtain Rods With Nickel Plated Brackets : , 20 Mm Dia (Heavy Type) , 25 Mm Dia (Heavy Type) , Providing And Fixing Isi Marked Oxidised M.S. Sliding Door Bolts With Nuts And Screws Etc. Complete : 300X16 Mm , Providing And Fixing Oxidised M.S. Hasp And Staple (Safety Type) Conforming To Is : 363 With Necessary Screws Etc. - 150 Mm , Providing And Fixing Is : 12817 Marked Stainless Steel Butt Hinges With Stainless Steel Screws Etc. Complete : 100X58x1.90 Mm , Providing And Fixing Is : 12817 Marked Stainless Steel Butt Hinges With Stainless Steel Screws Etc. Complete : 75X47x1.80 Mm , Providing And Fixing Special Quality Bright Finished Brass Cupboard Or Ward Robe Locks With Four Levers Of Approved Quality Including Necessary Screws Etc. 65Mm , Providing And Fixing Special Quality Bright Finished Brass Cupboard Or Ward Robe Locks With Four Levers Of Approved Quality Including Necessary Screws Etc. 50 Mm , Providing And Fixing Aluminium Die Cast Body Tubular Type Universal Hydraulic Door Closer (Having Brand Logo With Isi, Is : 3564, Embossed On The Body, Door Weight Upto 35 Kg And Door Width Upto 700 Mm), With Necessary Accessories And Screws Etc. , Providing And Fixing Aluminium Aldrop Sliding Door Bolts Isi Marked Anodised (Anodic Coating Not Less Than Grade Ac-10 As Per Is 1868) Transpared Or Dyed To Required Colour Or Shade With Nuts And Screws Etc. , (1) 300X16mm , (2) 250X16mm , Providing And Fixing Aluminium Handles, Isi Marked, Anodised (Anodic Coating Not Less Than Grade Ac 10 As Per Is : 1868) Transparent Or Dyed To Required Colour Or Shade, With Necessary Screws Etc. Complete : 125 Mm , Providing And Fixing Aluminium Hanging Floor Door Stopper, Isi Marked, Anodised (Anodic Coating Not Less Than Grade Ac 10 As Per Is : 1868) Transparent Or Dyed To Required Colour And Shade, With Necessary Screws Etc. - Twin Rubber Stopper , Providing And Fixing Factory Made Panel Pvc Door Shutter Consisting Of Frame Made Out Of M.S. Tubes Of 19 Gauge Thickness And Size Of 19 Mm X 19 Mm For Styles And 15X15 Mm For Top & Bottom Rails. M.S. Frame Shall Have A Coat Of Steel Primers Of Approved Make And Manufacture. M.S. Frame Covered With 5 Mm Thick Heat Moulded Pvc ‘C Channel Of Size 30 Mm Thickness, 70 Mm Width Out Of Which 50 Mm Shall Be Flat And 20 Mm Shall Be Tapered In 45 Degree Angle On Both Side Forming Styles And 5 Mm Thick, 95 Mm Wide Pvc Sheet Out Of Which 75 Mm Shall Be Flat And 20 Mm Shall Be Tapered In 45 Degree On The Inner Side To Form Top And Bottom Rail And 115 Mm Wide Pvc Sheet Out Of Which 75 Mm Shall Be Flat And 20 Mm Shall Be Tapered On Both Sides To Form Lock Rail. Top, Bottom And Lock Rails Shall Be Provided Both Side Of The Panel. 10 Mm (5 Mm X 2 ) Thick, 20 Mm Wide Cross Pvc Sheet Be Provided As Gap Insert For Top Rail & Bottom Rail, Paneling Of 5 Mm Thick Both Side Pvc Sheet To Be Fitted In The M.S. Frame Welded/ Sealed To The Styles & Rails With 7 Mm (5 Mm+2 Mm) Thick X 15 Mm Wide Pvc Sheet Beading On Inner Side, And Joined Together With Solvent Cement Adhesive. An Additional 5 Mm Thick Pvc Strip Of 20 Mm Width Is To Be Stuck On The Interior Side Of The ‘C Channel Using Pvc Solvent Adhesive Etc. Complete As Per Direction Of Engineer-In-Charge, Manufacturers Specification & Drawing. 30 Mm Thick Pre Laminated Pvc Door Shutters , Providing And Fixing Factory Made Upvc Door Frame Made Of Upvc Extruded Sections Having An Overall Dimension As Below (Tolerance ±1Mm), With Wall Thickness 2.0 Mm (± 0.2 Mm), Corners Of The Door Frame To Be Jointed With Galvanized Brackets And Stainless Steel Screws, Joints Mitred And Plastic Welded. The Hinge Side Vertical Of The Frames Reinforced By Galvanized M.S. Tube Of Size 19 X 19 Mm And 1Mm (± 0.1 Mm) Wall Thickness And 3 Nos. Stainless Steel Hinges Fixed To The Frame Complete As Per Manufacturers Specification And Direction Of Engineer In- Charge. - Extruded Section Profile Size 48X40 Mm , Providing And Fixing Plain Lining With Necessary Screws/Nuts & Bolts/ Nails, Including A Coat Of Approved Primer On One Face, And Fixed On Wooden /Steel Frame Work, Complete As Per Direction Of Engineer-In-Charge (Frame Work Shall Be Paid For Separately). 12Mm Thick Commercial Ply Conforming To Is : 1328 Bwr Type. , Supplying And Fixing Rolling Shutters Of Approved Make, Made Of Required Size M.S. Laths, Interlocked Together Through Their Entire Length And Jointed Together At The End By End Locks, Mounted On Specially Designed Pipe Shaft With Brackets, Side Guides And Arrangements For Inside And Outside Locking With Push And Pull Operation Complete, Including The Cost Of Providing And Fixing Necessary 27.5 Cm Long Wire Springs Manufactured From High Tensile Steel Wire Of Adequate Strength Conforming To Is: 4454 - Part 1 And M.S. Top Cover Of Required Thickness For Rolling Shutters. 80X1.25 Mm M.S. Laths With 1.25 Mm Thick Top Cover. , Extra For Providing Mechanical Device Chain And Crank Operation For Operating Rolling Shutters.Exceeding 10.00 Sqm And Upto 16.80 Sqm In The Area , Steel Work In Built Up Tubular (Round, Square Or Rectangular Hollow Tubes Etc.) Trusses Etc., Including Cutting, Hoisting, Fixing In Position And Applying A Priming Coat Of Approved Steel Primer, Including Welding And Bolted With Special Shaped Washers Etc. - Hot Finished Welded Type Tubes , Steel Work Welded In Built Up Sections/ Framed Work, Including Cutting, Hoisting, Fixing In Position And Applying A Priming Coat Of Approved Steel Primer Using Structural Steel Etc. As Required. In Stringers, Treads, Landings Etc. Of Stair Cases, Including Use Of Chequered Plate Wherever Required. , Steel Work Welded In Built Up Sections/ Framed Work, Including Cutting, Hoisting, Fixing In Position And Applying A Priming Coat Of Approved Steel Primer Using Structural Steel Etc. As Required. In Gratings, Frames, Guard Bar, Ladder, Railings, Brackets, Gates And Similar Works , Cement Concrete Pavement With 1:2:4 (1 Cement : 2 Coarse Sand : 4 Stone Aggregate-20Mm N.S) Including Finishing. , Kota Stone Slab Flooring Over 20 Mm (Average) Thick Base Laid Over And Jointed With Grey Cement Slurry Mixed With Pigment To Match The Shade Of The Slab, Including Rubbing And Polishing Complete With Base Of Cement Mortar 1 : 4 (1 Cement : 4 Coarse Sand) : 25 Mm Thick , 40 Mm Thick Fine Dressed Stone Flooring Over 20 Mm (Average) Thick Base Of Cement Mortar 1:5 (1 Cement : 5 Coarse Sand), Including Pointing With Cement Mortar 1:2 (1 Cement : 2 Stone Dust) With An Admixture Of Pigment To Match The Shade Of Stone. Red Sand Stone , Providing And Laying Ceramic Glazed Floor Tiles 300X300 Mm Of 1St Quality Conforming To Is:15622 Of Johnson ,Kajaria,Or Equiv. Approved Make Laid On 20 Mm Thick Cement Mortar 1:4 I/E Pointing The Joints With White Cement And Matching Pigments Etc. , Providing And Laying Virtified Floor Tiles(Thickness To Be Specified By The Manufacturer) With Water Absorption Less Than 0.08% And Conforming To Is : 15622 Of Approved Make In All Colours And Shades Laid On 20Mm Thick Cement Mortar 1:4 (1 Cement : 4 Coarse Sand ) I/E Removing The Broken Tiles And Raking Out The Old Under Layer And Grouting The Joints With White Cement And Matching Pigments Etc. Size Of Tile - 600X600mm , Providing And Laying Polished Granite Stone Flooring In Required Design And Patterns, In Linear As Well As Curvilinear Portions Of The Building As Per The Architectural Drawings With 18 Mm Thick Stone Slab Over 20 Mm (Average) Thick Base Of Cement Mortar 1:4 (1 Cement : 4 Coarse Sand) Laid And Jointed With Cement Slurry And Pointing With White Cement Slurry Admixed With Pigment Of Matching Shade Including Rubbing , Curing And Polishing Etc. As Specified And As Directed By The Engineer-In-Charge. Polished Granite Stone Slab Jet Black, Cherry Red, Elite Brown, Cat Eye Or Equivalent. , Providing Corrugated G.S. Sheet Roofing Including Vertical / Curved Surface Fixed With Polymer Coated J Or L Hooks, Bolts And Nuts 8 Mm Diameter With Bitumen And G.I. Limpet Washers Or With G.I. Limpet Washers Filled With White Lead, Including A Coat Of Approved Steel Primer And Two Coats Of Approved Paint On Overlapping Of Sheets Complete (Up To Any Pitch In Horizontal / Vertical Or Curved Surfaces), Excluding The Cost Of Purlins, Rafters And Trusses And Including Cutting To Size And Shape Wherever Required. 0.63 Mm Thick With Zinc Coating Not Less Than 275 Gm/ M² , Providing Gola 75X75 Mm In Cement Concrete 1:2:4 (1 Cement : 2 Coarse Sand : 4 Stone Aggregate 10Mm And Down Gauge) Including Finishing With Cement Mortar 1:3 (1 Cement : 3 Fine Sand) As Per Standard Design , Making Khurras 45X45 Cm With Average Minimum Thickness Of 5 Cm Cement Concrete 1:2:4 (1 Cement : 2 Coarse Sand : 4 Graded Stone Aggregate Of 20 Mm Nominal Size) Over P.V.C. Sheet 1 M X1 M X 400 Micron, Finished With 12 Mm Cement Plaster 1:3 (1 Cement : 3 Coarse Sand) And A Coat Of Neat Cement, Rounding The Edges And Making And Finishing The Outlet. , Providing & Fixing Uv Stabilised Fiberglass Reinforced Plastic Sheet Roofing Up To Any Pitch, Including Fixing With Polymer Coated J Or L Hooks, Bolts & Nuts 8Mm Dia. G.I Plain/Bitumen Washers Complete But Excluding The Cost Of Purlins, Rafters, Trusses Etc. The Sheets Shall Be Manufactured Out Of 2400 Tex Panel Rovigs Incorporating Minimum 0.3% Ultra-Violet Stabiliser In Resin System Under Approximately 2400 Psi And Hot Cured. They Shall Be Of Uniform Pigmentation And Thickness Without Air Pockets And Shall Conform To Is 10192 And Is 12866.The Sheets Shall Be Opaque Or Translucent, Clear Or Pigmented, Textured Or Smooth As Specified. 2 Mm Thick Corrugated (2.5 Or 4.2 Or 6) Or Step-Down (2 Or 3 Or 6 ) As Specified , Providing & Fixing Pressed Clay Tiles & Ridge (Manglore Tiles) 20Mm Nominal Thickness Of Approved Size & Pattern On Rcc Roof Or Steel Frame Work (Rcc Or Steel Work Paid Seprately).