Tender For For The Year 2026-27 For Mdr Roads Under Nahan Division (Sh:- providing and laying 30Mm Thick Bituminous Concrete, Thermoplastic Road Marking And Maintenance Of Side Drain On Markanda Bridge Kala Amb Trilokpur Road Km 18/00 To 20/00) Under
Tender Value
Ref. Documents
Estimated cost
Bid Submission
29 Oct 2026
2 days left
EMD
2.16 Lakhs
Bank guarantee accepted
Document Fee
5000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Sirmaur → Himachal Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for For The Year 2026-27 For Mdr Roads Under Nahan Division (Sh:- providing and laying 30Mm Thick Bituminous Concrete, Thermoplastic Road Marking And Maintenance Of Side Drain On Markanda Bridge Kala Amb Trilokpur Road Km 18/00 To 20/00) Under Pdna 2025
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 24-Oct-2026 | Extenstion of Date | Date | 29-Oct-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | Providing and applying tack coat with bitumen emulsion ( RS-1) using emulsion distributor @ 0.25 to 0.30 kg per sqm (zeor p;oint twenty five to zero point thirty Kilogramme per square metre) on the prepared granular surfaces treated with primer and cleaned with hydraulic broom as per Technical specification Clause 503 including haulage of material within all leads,lifts and carriage of materials and as per direction of Engineer-in-Charge. The rate is including octroi, royality, Malkana, toll tax, and any other taxes imposed by the Government but excluding GST. |
| 2 | Providing and laying 50mm (Fifty millimetres) compacted thick bituminous macadam with 100-120 (One hundred -One hundred twenty) tonne per hour hot mix plant producing an average output of 75 tonnes (seventy five tonne) per hour using crushed aggregates of specified grading as per table 500.4 premixed with bituminous binder VG-30 (Viscosity Grade-Thirty) at the rate of 3.3% (Three decimal three percent) of mix weight of weight of bitumen, transported to site, laid over a previousioly prepared surface with paver finisher to the required grade, level and alignment and rolled as per MORD technical specificaton section 500 complete in all respect or as directed by the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is including octroi, royality, Malkana, toll tax, and any other taxes imposed by the Government but excluding GST. |
| 3 | Providing and laying 30mm (Twenty five milimetre) thick bituminous concrete with 100-120 TPH batch type hot mix plant producing an average output of 75 tonnes per hour using crushed aggregates of specified grading, premixed with bituminous binder @ 5.50 (Five point Five zero) percent of mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MORTH specification clause No. 509 complete in all respect including haulage of material within all leads,lifts and carriage of materials and as per direction of Engineer-in-Charge. The rate is including octroi, royality, Malkana, toll tax, and any other taxes imposed by the Government but excluding GST. |
| 4 | Providing and laying of hot applied thermoplastic compound 2.5 mm (Two point five milimetre)thick including reflectorising glass beads @ 250 gms per sqm (Two hundred fifty gramme per square metre) area, thickness of 2.5 mm (Two point five milimetre) is exclusive of surface applied glass beads as per IRC:35 .The finished surface to be level, uniform and free from streaks and holes including haulage of material within all leads,lifts and carriage of materials and as per direction of Engineer-in-Charge. The rate is including octroi, royality, Malkana, toll tax, and any other taxes imposed by the Government but excluding GST. |
| 5 | Providing and fixing of road stud 100 x 100 mm die cast in aluminium, resistant to corrosive effect of salt and grit, fitted with lense reflectors, installed in concrete or asphaltic surface by drilling holes 30 mm upto a depth of 600 mm and bedded in a suitable bituminous grout or epoxy mortar, all as per BS:873 (Part 4) 1973 including haulage of material within all leads,lifts and carriage of materials and as per direction of Engineer-in-Charge. The rate is including octroi, royality, Malkana, toll tax, and any other taxes imposed by the Government but excluding GST. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 24, 2026
11:30 IST
Tender Published
Tender notice published.
Completed
Oct 29, 2026
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Upcoming · 2 daysOct 29, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 2 daysOct 29, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 2 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender