Tender For Providing Lis For Village Sukhriah Upprli, Sukriah Buhli And Behrad In Tehsil Nadaun Distt. Hamirpur ( H.P.) (Sh:-C/O Of Collection Tank And Delivery Tank 40000 Liter Capacity Each.) )
Tender Value
7.06 Lakhs
Estimated cost
Bid Submission
27 Oct 2026
7 days left
EMD
14136
Bank guarantee accepted
Document Fee
350
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Hamirpur → Himachal Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Providing Lis For Village Sukhriah Upprli, Sukriah Buhli And Behrad In Tehsil Nadaun Distt. Hamirpur ( H.P.) (Sh:-C/O Of Collection Tank And Delivery Tank 40000 Liter Capacity Each.) )
BOQ
| Sl. No. | Item Description |
| 1 | Excavation in foundation trenches etc. in all kinds of soil such as pick jumper work blasting soft or hard rock or by chiselling where blasting is prohibited soft/hard rock in all lifts stacking the excavated soil as directed by the Engineer-in-charge clear from the edge of excavation and then returning the stacked soil in 15cm layers when required into plinth sides of foundation etc. consolidating each deposited layer by ramming and watering and then disposing of all surplus excavated earth as directed by the Engineer-in-charge in all leads and lifts. |
| 2 | Providing and laying cement concrete 1:3:6(1cement:3sand:6 graded stone aggregate 40mm nominal size and curing complete excluding the cost of form work in foundation and plinth in all leads and lifts. |
| 3 | Providing and laying cement concrete 1:1.5:3(1cement:1.5sand:3 graded stone aggregate 20mm nominal size)and curing complete excluding the cost of form work and reinforcement for reinforced concrete work in:- |
| 4 | Foundation ,footing,bases of column and the lika &mass concrete. |
| 5 | Wall(any thickness but not less than .10 mtrs attaches pillasters,buttresses plinth and stirng courses etc.,fron top of found,level up to floor level |
| 6 | Providing form work with steel plated 3.15mm thick welded with angle iron in frame 30x30x5mm, so as to give a fair finish including centring,shuttering,strutting and propping etc. with wooden battens and ballies height of propping and centering below supporting floor to ceiling not exceeding 4 meters and removal of the same for insitu-reinforced concrete and plain. |
| 7 | Vertical surfaces such as wall (any thick.) partitions & the like i/c attached pillasters,buttresses,plinth & string courses & the like. |
| 8 | Providing in RCC. Work smooth finishing of the exposed surface with cement mortar 1:3(1cement:3sand) complete in all respect. |
| 9 | Providing, Laying mild or tor steel reinforcement for RCC. Work including bending binding and placing in position complete upto floor two level Tor steel in all leads and lifts. |
| 10 | Steel work welded in built up sections, trusses, and framed work including cutting ,hoisting, fixing in position and applying a priming coat of red lead paint in grating, framed guards bars, Ladders, railings, brackets and similar works as per direction and to the entire satisfaction of the Engineer-in-charge. |
| 11 | Laying in trenches GMS / MS Tubes (L / M class) tube fitting (Earth work in trenches to be measured & paid for separately) |
| 12 | Inlet, Outlet and Scour Pipe100 mm dia |
| 13 | Providing and fixing C.I. Sluice valves Kirlosakar /Leader make of following diameter with hand wheel as per IS:14846-2000 (Class PN-1.0) (including brass spindle as per 2906-1984 complete with bolts nuts, rubber insertion etc. and as per direction and to the entire satisfaction of the Engineer-in-charge. |
| 14 | 100 mm dia |
| 15 | Constructing chamber for sluice valve, with CI surface box 100 mm top dia.,160 mm bottom dia. & 180 mm deep(inside) with chained lid RCC top 1:2:4 mix (1 cement :2 sand :4 graded stone aggregate 20 mm nominal size) 100mm thick foundation concrete 1:5:10 mix (1cement : 5 sand : 10 graded stone aggregate 40 mm nominal size) & inside plastering with cement mortor 1 :3 (1 cement : 3 sand) finished with a floating coat of neat cement i/c curing complete. 600 x 600 x 750 mm inside size With 150 mm thick walls of RCC 1:2 :4 (1 cement :2 sand :4 graded stone aggregate 20mm nominal size) complete with form work & reinforcement with 6 mm bars at not exceeding 150 mm centres both ways Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 19, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 27, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 7 daysOct 27, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 7 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender