Tender For Repairs To False Ceiling, Wall Panelling And Allied Works In Certain Tech Buildings In Tech Area At Af Stn Ad Ur
Tender Value
40 Lakhs
Estimated cost
Bid Submission
10 Nov 2026
15 days left
EMD
80000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Jalandhar → Punjab
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repairs To False Ceiling, Wall Panelling And Allied Works In Certain Tech Buildings In Tech Area At Af Stn Ad Ur
BOQ
| Sl. No. | Item Description |
| 1 | Demolition of wall and ceiling boards (fibre, pulp, gypsum, POP, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets and metal frame work etc complete all as specified and directed. |
| 2 | S&F Solid PVC wall lining consisting of 5mm thick plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame, PVC strip etc fixing as wall panelling up to ceiling level all included as per specification SSR part-I complete all as specified and directed. |
| 3 | S&F 5mm thick PVC sheet fillet of width 35mm for wall panelling inclusive of fixing on wall to make PVC frame, complete all as specified and directed. |
| 4 | S&F Powder coated GI snap grid frame work of size 605mm x 605mm for false ceiling complete with acessories all as specified and shown on serial page No.186 of MES Schedule Part-II. |
| 5 | M&L for 4 mm thick asbestos fibre cement building board, cut to size and fixed in grid frame work ceiling as panels, complete all as specified and directed. |
| 6 | M&L Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified and directed. |
| 7 | M&L for Gypsum Board 12mm thick in ceiling fixed with screw as per manufacturers instructions including two oats of interior acrylic distemper/oil bound distemper over a coat of putty filling on gap ceiling surfaces complete all as specified and directed. |
| 8 | M&L Gl frame work for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre complete all as specified and directed. |
| 9 | M&L for 18/19 mm thick Perforated particle board/ tiles for insulation and accoustic purposes,60x60 cm in sizefixed with nails to timber frame work or with staples on snap grid etc complete all as specified and directed. |
| 10 | M&L for Elegant Fabric Tile made of perforated cement fiber composite 600X600/600X1200X5mm with square edge density 1050kg/m3 covered with fabric on the front side and Acoustics fiber on the back side, water resistance, and fire resistant absorption coefficient upto 0.89 at 160 Hz tested as per ISO 354. The tiles are anti-sag and are installed with Aluminum H Profile on G.I studs 600x600mm center to center 2400mm X 50mm web thickness 0.5mm, flanges 15 & 50mm fully knurled giving it high strength, hot dipped galvanized steel with120GSM zinc coating specially designed for Acoustic vibration management and long life with a backing of 50mm 1000 GSM thick absorbwool tested as per Fire Retardant IS 15061-2002 for excellent result etc complete all as specified and directed. |
| 11 | S&F in repair for 3 to 4 mm thick Aluminium Composite Panel (ACP) with and including 2 mm thick cushioning and 1mm thick aluminium sheet on both side of colour as approved by GE, fixed in wall cladding etc complete all as specified and directed. |
| 12 | S&F in repair aluminium tubes as in framework for fixing wall cladding of sections as approved by GE, complete all as specified and directed. |
| 13 | Dismantling of Plain or corrugated steel sheeting, any gauge, hickness, including Nainital or similar pattern roof coverings complete all as specified. |
| 14 | S&F Galvanised corrugated mild steel sheeting 0.63mm thick with two corrugations side lap fixed with galvanised mild steel L/J type hook including washer etc as in roofs, walls, gates cladding of hanger / BPs with grade of zinc coating 275 etccomplete all as specified and directed. |
| 15 | S&F in repair Galvanised corrugated mild steel sheeting (Except sheeting any thickness) with two corrugations side lap fixed with galvanised mild steel L / J type hook including washer etc as in roofs, walls, gates cladding of hanger / BPs complete all as specified and directed. |
| 16 | S&F Plain, galvanised, mild steel sheeting 0.63mm thick, in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 275, complete all as specified and directed. |
| 17 | S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm of any colour hving tensile strength of 550 Mpa as in roof coverng/cladding to wall, fixed with self tapping screws etccomplete all as specified and directed. |
| 18 | S&F in repair Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet(Except sheeting any thickness) as in roof coverng/cladding to wall fixed with self tapping screws etc. complete all as specified and directed. |
| 19 | S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed. |
| 20 | Dismantling of Asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings complete all as specified and directed. |
| 21 | M&L for 6mm thick asbestos cement, corrugated or semi-corrugated sheets in roofs, walls etc.fixed with galvanised mild steel L / J type hook or cranked hook bolts including washer etc.complete all as specified and directed. |
| 22 | S&F in repair 6mm thick asbestos cement, corrugated or semi-corrugated sheets (Except sheeting any thickness) in roofs, walls etc.fixed with galvanised mild steel L / J type hook or crankedhook bolts including washer etc complete all as specified and directed. |
| 23 | S&F Asbestos cement two piece adjustable plain wing ridge 6mm thickserrated ridge for corrugated or semi corrugated sheets .fixed with galvanised mild steel L / J type hook or cranked hook bolts including washer etc complete all as specified and directed. |
| 24 | M&L for Complete removal of existing treatment of any description, including prepration of wall surfaces of any description complete all as specified and applying the following: -(a) Applying wall care putty 1mm thick, in two coats & smoothening the surfaces with sand papers/ mechanized sanding etc., (preparatory to paint as directed). (b) Two coats of interior acrylic distemper over and including a coat of acrylic emulsion primer. |
| 25 | M&L preparation of old plastered surfaces of wall and applying one coat OBD including preparation of surface of wall etc complete all as specified and directed. |
| 26 | M&L for Complete removal of existing treatment of any description, including prepration of wall surfaces of any description complete all as specified and applying the following: - a) Applying wall care putty 1 mm thick, in two coats & smoothening the surfaces as specified. (preparatory to paint as directed).complete all as specified. (b) Two coats of exterior acrylic emulson over and including a coat of water based exterior primer in disruptive/camouflaging pattern of six/four shades complete all as specified and directed. |
| 27 | M&L for exterior acrylic emulsion on PQC surfaces in disruptive / camouflaging pattern of six / four shades comporising the following activities complete all as specified and directed by Engr-in-Charge:- (i) Preparation of old PQC surfaces by mechanised sander having RPM of minimum 1200 having vaccum bag.(ii) Applying two coats of water based exterior acrylic emulsion as in base coat over a coat of primer.(iii) Applying two coats of exterior acrylic emulsion in disruptive/camouflaging pattern of six / four shades in Tattoos only. (Camouflage pattern shall be approved by Stn Auth). |
| 28 | Maintnance of drain/nallah (cross section area n exe 1.5 sqm) by cutting all bushes shrubs, sarkness and any type of vegetation and desilting all deposit of soil and other material to have a free flow of water and to get a uniform trapezoidal/ rectangular shape of drain and removing all spoil outside MOD area at authourised dumping site declared by local administration etc complete all as specified and directed.. |
| 29 | Dismantling structural steel works or of any description / type including doors, gates etc complete all as specified and directed. |
| 30 | S&F Hand rails, half round or other steel section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts.posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed. |
| 31 | M&L for Two coats of synthetic enamel paint over & including a coat of red oxide primer over steel & iron (new) surfaces of any description, not otherwise described, over 10 cm in width or girth, including preparation of surfaces complete all as specified and directed. |
| 32 | S&F Rolled mild steel sections as in main & cross beams, hip & jack rafters; purlins where connected to common rafters & running rails & guides for sliding doors; fixed with angle cleats or other connecting plates conforming to Fe-290 Gde E-165 complete all as specified and directed. |
| 33 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) and removing serviceable tiles to store and rubbish off the premises complete all as specified and directed. |
| 34 | M&L Granite (of any type) work, 20 mm thick (Table rubbed and polished) in steps, jambs, pillars, window cills, cooking plateforms and like in cement mortar 1:4, including pointing in white cement 1:2, using marble dust with admixture of pigment to match with marble shade of Granite including half moulding of granite edges over 15 mm thick rendering in cement mortar (1:6) and pointed. in white cement with pigment to match the colour of tiles complete all as specified and directed. |
| 35 | M&L for Granite (of any type) work 20 mm thick (table rubbed and polished) for wall lining (veneering to wall) 15mm thick in cement mortar (1:3) and pointing with white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed. |
| 36 | M&L for First quality,Virified Ceramic(Double Charged) tiles light shade 10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.42 sqm but not exceeding 1.00 sqm, in floors etc. over including white or coloured cement to match the shade of tile laid over and including 10mm thick rendering in cement mortar (1:4) including necessary cutting as per site requirement , set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade, complete all as specified and directed. |
| 37 | M&L for First quality, vitrified ceramic(Double Charged) coloured tiles 9-10mm thick, of size exceeding 0.42 sqm but not exceeding 1.00 sqm, on vertical surfaces as in skirting, dado etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile laid over and including 10mm thick rendering in cement mortar (1:4) including necessary cutting as per site requirement complete all as specified and directed. |
| 38 | Demolition of cement concrete in ground floors and pavings n exc 15cm thickness (below or above ground level) and removing demolished material from site to a distance exceeding 1.50 Km and not exceeding 5 Km and depositing where directed by Engineer-in-Charge. |
| 39 | M&L for 75mm thick plain cement concrete 1:4:8 type D2, using 40mm graded stone aggregate as in sub base complete all as specified and directed. |
| 40 | M&L for 25mm thick plain cement concrete 1:2:4 type B1, using 20mm graded stone aggregate as in sub base complete all as specified and directed. |
| 41 | M&L for Sand filling under floors or in foundation including watering & consolidation etc complete all as specified and directed. |
| 42 | M&L for 60mm thick Machine pressed precast interlocking (M-35) cement concrete tiles (Coloured) of approved design & pattern confirming to IS 15658-2006 with gray cement and no pigments etc complete all as specified and directed. |
| 43 | M&L for 80mm thick Machine pressed precast interlocking (M-40) cement concrete tiles (Coloured) of approved design & pattern confirming to IS 15658-2006 with gray cement and no pigments etc complete all as specified and directed. |
| 44 | Rounding off / moulding to edges (half round) of stone of any description including rubbing and polishing (Granite finish), complete all as specified and directed. |
| 45 | M&L for preparation of plastered or un plastered old decorated ceiling surfaces by Vacuum based sanding machine all as specified and filling cracks/hole applying one coat distemper oil emulsion white or coloured by auto roller complete incl removal of nails etc and grinding where necessary complete all as specified and directed. Please Enable Macros to View BoQ information |
| 46 | M&L for preparation of plastered or un plastered old decorated ceiling surfaces by Vacuum based sanding machine all as specified and filling cracks/hole applying one coat distemper oil emulsion white or coloured by auto roller complete incl removal of nails etc and grinding where necessary complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 19, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 10, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 15 daysNov 12, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 17 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender