Tender For Construction Of An Electrical Substation For Installation Of Air Conditioners (Acs) In The Courtrooms And Chambers Of The Janpad Nyayadhish And Additional Janpad Nyayadhish.
Tender Value
40 Lakhs
Estimated cost
Bid Submission
27 Oct 2026
5 days left
EMD
4 Lakhs
Bank guarantee accepted
Document Fee
2714
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Basti → Uttar Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Construction Of An Electrical Substation For Installation Of Air Conditioners (Acs) In The Courtrooms And Chambers Of The Janpad Nyayadhish And Additional Janpad Nyayadhish.
BOQ
| Sl. No. | Item Description |
| 1 | Earth work in exacavation in trenches for foundations and for pipes cables etc. in ordinary soil(loam clay or sand) including lift upto 1.5 m and dressing of sides and ramming of bottom sand disposal of surplus excavated earth as directed by the Engineer i/c with in a lead of 50m.Excavation up to 1.50 mt. depthAs per DSR No.2.6.1(Rates are excluding G.S.T. but Including All Taxes Royalty, Labour cess, Materials & T.&P.) |
| 2 | Disposal of available earth (up to 5 kms.)As per DSR No.1.1.2(Rates are excluding G.S.T. but Including All Taxes Royalty, Labour cess, Materials & T.&P.) |
| 3 | Providing and laying in cement concrete 1:4:8 (1 cement :4 coarse sand :8 graded Stone aggregate 40 mm nominal size) and curing complete,including cost of form- work,in foundation and floors.As per DSR No.4.1.8(Rates are excluding G.S.T. but Including All Taxes Royalty, Labour cess, Materials & T.&P.) with curing |
| 4 | Sand filling in plinth under floors including watering, ramming, consolidating and dressing complete including lead up to 50m and lift upto 1.5m and including cost of sand.As per DSR No.2.27(Rates are excluding G.S.T. but Including All Taxes Royalty, Labour cess, Materials & T.&P.) |
| 5 | Diluting and injecting chemical emulsion for PRE-CONSTRUCTIONAL anti-termite treatment (excluding the cost of chemical emulsion) :Treatment of soil under floors using chemical emul sion @ one litre per hole, 300 mm apart including drilling 12 mm diameter holes and plugging with cement mortar 1 :2 (1 cement : 2 Coarse sand) to match the floor: With Chlorpyriphos/Lindane E.C. 20% with 1% concentrationAs per DSR No.2.35.3.1(Rates are excluding G.S.T. but Including All Taxes Royalty, Labour cess, Materials & T.&P.) |
| 6 | Diluting and injecting chemical emulsion for PRE-CONSTRUCTIONAL anti-termite treatment (excluding the cost of chemical emulsion) :Treatment of masonry using chemical emulsion @ one litre per hole at 300 mm interval including drilling holes at 45 degree and plugging them with cement mortar 1:2 (1 ce ment : 2 coarse sand) to the full depth of the hole,With Chlorpyriphos/Lindane E.C. 20% with 1% concentrationAs per DSR No.2.35.4.1(Rates are excluding G.S.T. but Including All Taxes Royalty, Labour cess, Materials & T.&P.) |
| 7 | R.C.C. work with cement approved coarse sand and 20 mm. guage approved stone grit im the proportion of 1:1.5:3 in lintels of doors and windows excluding supply of reinforcement and its fixing and binding the same with 24 BWG binding wire and including necessary centering and shuttering etc.and also including supply of all materials, labour and tools and plants etc, required for proper completion of the works. strength of the concrete shall not beless than M-200. As in item no. 6 above but for slabs (Using 1:1.5:3 Mix concrete)As per DSR No.5.3(Rates are excluding G.S.T. but Including All Taxes Royalty, Labour cess, Materials & T.&P.) with curing |
| 8 | R.C.C. work with cement approved coarse sand and 20 mm. guage approved stone grit im the proportion of 1:1.5:3 in lintels of doors and windows excluding supply of reinforcement and its fixing and binding the same with 24 BWG binding wire and including necessary centering and shuttering etc.and also including supply of all materials, labour and tools and plants etc, required for proper completion of the works. strength of the concrete shall not beless than M-200. As in item 6 but for the lighter beams i.e. having spans upto 6 m. (Using 1:1.5:3 Mix concrete)Tie beamAs per DSR No.5.1.2(Rates are excluding G.S.T. but Including All Taxes Royalty, Labour cess, Materials & T.&P.) with curing |
| 9 | R.C.C. work with cement approved coarse sand and 20 mm. guage approved stone grit im the proportion of 1:1.5:3 in lintels of doors and windows excluding supply of reinforcement and its fixing and binding the same with 24 BWG binding wire and including necessary centering and shuttering etc.and also including supply of all materials, labour and tools and plants etc, required for proper completion of the works. strength of the concrete shall not beless than M-200. As in item 6 above but in Column with approved stone ballast.(Using 1:1.5:3 Mix concrete)Above plinth levelAs per DSR No.5.2.2(Rates are excluding G.S.T. but Including All Taxes Royalty, Labour cess, Materials & T.&P.) with curing |
| 10 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in: Cement mortar 1:6 (1 cement : 6 coarse sand)As per DSR No.6.1.2(Rates are excluding G.S.T. but Including All Taxes Royalty, Labour cess, Materials & T.&P.) with curing |
| 11 | Providing and laying damp-proof course 40mm thick with cement concrete 1:2:4 (1 cement : 2 coarse sand (zone-III): 4 graded stone aggregate 12.5mm nominal size)As per DSR No.4.1(Rates are excluding G.S.T. but Including All Taxes Royalty, Labour cess, Materials & T.&P.) with curing |
| 12 | Painting in D.P.C. With two coats of airblown bitumen 85/50 or 85/25 @ about 1.7 Kg./Sqm including cost of fuel if any.As per DSR No.4.13(Rates are excluding G.S.T. but Including All Taxes Royalty, Labour cess, Materials & T.&P.) |
| 13 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in : Cement mortar 1:6 (1 cement : 6 coarse sand)As per DSR No.6.4.2(Rates are excluding G.S.T. but Including All Taxes Royalty, Labour cess, Materials & T.&P.) with curing |
| 14 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete. Thermo-Mechanically Treated bars of grade Fe-500D or more.As per DSR No.5.22.6(Rates are excluding G.S.T. but Including All Taxes Royalty, Labour cess, Materials & T.&P.) |
| 15 | 15 mm cement plaster on rough side of single or half brick wall of mix: 1:4 (1 cement: 4 coarse sand)As per DSR No.13.5.1(Rates are excluding G.S.T. but Including All Taxes Royalty, Labour cess, Materials & T.&P.) with curing |
| 16 | 15 mm cement plaster on rough side of single or half brick wall of mix:1:6 (1 cement: 6 coarse sand)As per DSR No.13.5.2(Rates are excluding G.S.T. but Including All Taxes Royalty, Labour cess, Materials & T.&P.) with curing |
| 17 | 12 mm cement plaster of mix : 1:6 (1 cement: 6 coarse sand)As per DSR No.13.4.2(Rates are excluding G.S.T. but Including All Taxes Royalty, Labour cess, Materials & T.&P.) with curing |
| 18 | Cement concrete flooring 1:2:4 (1 cement ; 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry but excluding the cost of nosing of steps etc. complete. 40 mm thick with 20 mm nominal size stone aggregateAs per DSR No.11.3.1(Rates are excluding G.S.T. but Including All Taxes Royalty, Labour cess, Materials & T.&P.) with curing |
| 19 | Extra for making chequers of approved pattern on cement concrete floors, steps, landings, pavements etc.As per DSR No.11.8(Rates are excluding G.S.T. but Including All Taxes Royalty, Labour cess, Materials & T.&P.) |
| 20 | Cement plaster skirting up to 30 cm height, with cement mortar 'l :3 ('1 cement : 3 coarse sand), finished with a floating coat of neat cement. 18 mm thickAs per DSR No.11.6.1(Rates are excluding G.S.T. but Including All Taxes Royalty, Labour cess, Materials & T.&P.) with curing |
| 21 | Providing and fixing glass strips in joints of lerrazol cement concrete floors. 40 mm wide and 4 mm thickAs per DSR No.11.13.1(Rates are excluding G.S.T. but Including All Taxes Royalty, Labour cess, Materials & T.&P.) |
| 22 | Mild steel or iron work of small sizes and sections -Providing and fixing T-iron frames for doors, windows and ventilators of mild steel Tee-sections, joints mitred and welded, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer. Fixing with 15x3 mm lugs 10 cm long embedded in cement concrete block 15x10x10 cm of C.C. 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size)As per DSR No.11.13.1(Rates are excluding G.S.T. but Including All Taxes Royalty, Labour cess, Materials & T.&P.) |
| 23 | Mild steel or iron work of small sizes and sections -Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.ln gratings, frames, guard bar, ladder, railings, brackets, gates and similar worksAs per DSR No.10.25.2(Rates are excluding G.S.T. but Including All Taxes Royalty, Labour cess, Materials & T.&P.) |
| 24 | Mild steel or iron work of small sizes and sections -Providing and fixing factory made ISI marked steel glazed doors, windows and ventilators, side /top /centre hung, with beading and all members such as F7D, F4B, K11 B and K12 B etc. complete of standard rolled steel sections, joints mitred and flash butt welded and sash bars tenoned and riveted, including providing and fixing of hinges, pivots, including priming coat of approved steel primer, but excluding the cost of other fittings, complete all as per approved design, (sectional weight of only steel members shall be measured for payment).Fixing with 15x3 mm lugs 10 cm long embedded in cement concrete block 15x10x10 cm of C.C. 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size)As per DSR No.10.11.1(Rates are excluding G.S.T. but Including All Taxes Royalty, Labour cess, Materials & T.&P.) |
| 25 | Providing & fixing glass panes with putty and glazing clips in steel doors, windows, clerestory windows, all complete with : 4.0 mm thick glass panes.As per DSR No.10.30.1(Rates are excluding G.S.T. but Including All Taxes Royalty, Labour cess, Materials & T.&P.) |
| 26 | Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade : New work (two or more coats) over and including water thinnable priming coat. (For Internal wall surface & ceiling)As per DSR No.13.41.1(Rates are excluding G.S.T. but Including All Taxes Royalty, Labour cess, Materials & T.&P.) |
| 27 | Finishing walls with water proofing cement paint of required shade : New work (Two or more coats applied @ 3.84 kg/10 sqm)As per DSR No.13.44.1(Rates are excluding G.S.T. but Including All Taxes Royalty, Labour cess, Materials & T.&P.) |
| 28 | Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor etc., up to floor flve level, excluding the cost of centering, shuftering and finishing:1:2:4 (1 Cement : 2 coarse sand (zone-lll) denved fromnatural sources :4 graded stone aggregate 20 mm nominal size derived from natural sources)As per DSR No.4.2.3(Rates are excluding G.S.T. but Including All Taxes Royalty, Labour cess, Materials & T.&P.) with curing |
| 29 | Steel Painting:(a) With ready mixed red oxide zink chromate primer of approved brand and manufacture on steel galvanised iron/steel works.As per DSR No.13.50.3(Rates are excluding G.S.T. but Including All Taxes Royalty, Labour cess, Materials & T.&P.) |
| 30 | Steel Painting:(b) Painting with synthetic enamel paint of approved brand and manufacture to give an even shade: Two or more coats on new work.As per DSR No.13.62.1(Rates are excluding G.S.T. but Including All Taxes Royalty, Labour cess, Materials & T.&P.) |
| 31 | Providing and laying integral cement based water proofing treatment including preparation of surface as required for treatment of roofs, balconies, terraces etc consisting of following operations:(a) Applying a slurry coat of neat cement using 2.75 kg/sqm of cement admixed with water proofing compound conforming to IS. 2645 and approved by Engineer-in-charge over the RCC slab including adjoining walls upto 300 mm height including cleaning the surface before treatment.(b) Laying brick bats with mortar using broken bricks/brick bats 25 mm to 115 mm size with 50% of cement mortar 1:5 (1 cement : 5 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineerin- charge over 20 mm thick layer of cement mortar of mix 1:5 (1 cement :5 coarse sand ) admixed with water proofing compound conforming to IS : 2645 and approved by Engineerin- charge to required slope and treating similarly the adjoining walls upto 300 mm height including rounding of junctions of walls and slabs.(c) After two days of proper curing applying a second coat of cement slurry using 2.75 kg/ sqm of cement admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge.(d) Finishing the surface with 20 mm thick jointless cement mortar of mix 1:4 (1 cement :4 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge including laying glass fibre cloth of approved quality in top layer of plaster and finally finishing the surface with trowel with neat cement slurry and making pattern of 300x300 mm square 3 mm deep.(e) The whole terrace so finished shall be flooded with water for a minimum period of two weeks for curing and for final test.“All above operations to be done in order and as directed and specified by the Engineer-in-Charge : With average thickness of 120 mm and minimum thickness at khurra as 65 mm.As per DSR No.22.7.1(Rates are excluding G.S.T. but Including All Taxes Royalty, Labour cess, Materials & T.&P.) |
| 32 | Supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete, including the cost of providing and fixing necessary 27.5 cm long wire springs manufactured from high tensile steel wire of adequate strength conforming to IS: 4454 - part 1 and M.S. top cover of required thickness for rolling shutters. 80x1.25 mm M.S. laths with 1.25 mm thick top coverAs per DSR No.10.6.1(Rates are excluding G.S.T. but Including All Taxes Royalty, Labour cess, Materials & T.&P.) |
| 33 | Providing and fixing ball bearing for rolling shutters. As per DSR No.10.7(Rates are excluding G.S.T. but Including All Taxes Royalty, Labour cess, Materials & T.&P.) |
| 34 | Centering and shuttering including strutting, propping etc. and removal of form for :Foundations, footings, bases of columns, etc. for mass concrete.As per DSR No.5.9.1(Rates are excluding G.S.T. but Including All Taxes Royalty, Labour cess, Materials & T.&P.) |
| 35 | Centering and shuttering including strutting, propping etc. and removal of form for :Columns, Pillars, Piers, Abutments, Posts and Struts.As per DSR No.5.9.6(Rates are excluding G.S.T. but Including All Taxes Royalty, Labour cess, Materials & T.&P.) |
| 36 | Centering and shuttering including strutting, propping etc. and removal of form for :Lintels, beams, plinth beams, girders, bressumers and cantilevers with water proof ply 12 mm thickAs per DSR No.5.9.21(Rates are excluding G.S.T. but Including All Taxes Royalty, Labour cess, Materials & T.&P.) |
| 37 | Centering and shuttering including strutting, propping etc. and removal of form for :Suspended floors, roofs, landings, balconies and access platform with water proof ply 12 mm thickAs per DSR No.5.9.20(Rates are excluding G.S.T. but Including All Taxes Royalty, Labour cess, Materials & T.&P.) |
| 38 | Providing and laying factory made chamfered edge Cement Concrete paver blocks in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50 mm thick compacted bed of sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand. complete all as per direction of Engineer-in-Charge. 80 mm thick C.C. paver block of M-35 grade with approved colour design and pattern. As per DSR No.16.91.2(Rates are excluding G.S.T. but Including All Taxes Royalty, Labour cess, Materials & T.&P.) |
| 39 | Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources). Plinth bandAs per DSR No.5.1.2(Rates are excluding G.S.T. but Including All Taxes Royalty, Labour cess, Materials & T.&P.) |
| 40 | Excavating, supplying and filling of local earth (including royalty) by mechanical transport upto a lead of 5km also including ramming and watering of the earth in layers not exceeding 20 cm in trenches, plinth, sides of foundation etc. complete. As per DSR No.2.25,a(Rates are excluding G.S.T. but Including All Taxes Royalty, Labour cess, Materials & T.&P.) |
| 41 | Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer - in- charge.As per DSR No.15.3(Rates are excluding G.S.T. but Including All Taxes Royalty, Labour cess, Materials & T.&P.) |
| 42 | Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge. In cement mortarAs per DSR No.15.7.4(Rates are excluding G.S.T. but Including All Taxes Royalty, Labour cess, Materials & T.&P.) |
| 43 | Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead. For thickness of tiles above 25 mm and up to 40 mmAs per DSR No.15.23.2(Rates are excluding G.S.T. but Including All Taxes Royalty, Labour cess, Materials & T.&P.) |
| 44 | Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved.As per DSR No.15.6(Rates are excluding G.S.T. but Including All Taxes Royalty, Labour cess, Materials & T.&P.) |
| 45 | GST will be paid as per Govt Rule Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 17, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 27, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 5 daysOct 27, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 5 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender