Bids Are invited for Custom Bid For Services - Rewiring Of Quarters Of Cgm Complex Colony And Hospital Colony And Area Hospital And Vip Guest House Power Supply And Other Related Activities For Fy 2026 27 - Supplying & Erecting Fuse Bridges With Base
Tender Overview
Project Description
Bids Are invited for Custom Bid For Services - Rewiring Of Quarters Of Cgm Complex Colony And Hospital Colony And Area Hospital And Vip Guest House Power Supply And Other Related Activities For Fy 2026 27 - Supplying & Erecting Fuse Bridges With Base Hc Type Fuse Links 240V, 63A Erected On Polished Wooden Block , Supplying And Erecting Single Pole And Neutral Distribution Board (Spndb), With 2 Ways For Incoming And 4 Ways (4 Poles) For Outgoing Sp Mcbs, With Door, 1.2Mm Thickness Surface/Flush Mounted, Ip 43 Protection On Provided Iron/Gi Frame As Per Specification No. Sw-Mcbdb , Supplying And Erecting Single Pole And Neutral Distribution Board (Spndb), With 2 Ways For Incoming And 6 Ways (6 Poles) For Outgoing Sp Mcbs, With Door, 1.2Mm Thickness Surface/Flush Mounted, Ip 43 Protection On Provided Iron/Gi Frame As Per Specification No. Sw-Mcbdb , Supplying And Erecting Single Pole And Neutral Distribution Board (Spndb), With 2 Ways For Incoming And 8 Ways (8 Poles) For Outgoing Sp Mcbs, With Door, 1.2Mm Thickness Surface/Flush Mounted, Ip 43 Protection On Provided Iron/Gi Frame As Per Specification No. Sw-Mcbdb , Supplying, Erecting And Marking Double Pole Isolator Only Switch Version Of Miniature Circuit Breaker Of 40A With Required Wiring Connections And Lugs Etc. In Provided Distribution Board , Supplying, Erecting & Marking Sp Mcb 6A To 32A, C-Series With Rated Short - Circuit Breaking Capacity (Icn) 10Ka In Provided Distribution Board As Per Specification No. Sw-Mcb , Supplying, Erecting & Commissioning 2 Pole Rccb 40A, Electromagnetic Type With 30/100/300 Ma Sensitivity With Earth Leakage Trip Indication Complete As Per Specification No. Sw-Rccb , Supplying & Erecting Mains With 2X2.5 Sq.Mm Frlsh Copper Pvc Insulated Wire Laid In Provided Conduit/Trunking/Inside Pole/Bus Bars Or Any Other Places. As Per Specification No. Wg-Ma/Bw , Supplying & Erecting Mains With 2X4 Sq.Mm Frlsh Copper Pvc Insulated Wire Laid In Provided Onduit/Trunking/Inside Pole/Bus Bars Or Any Other Places. As Per Specification No. Wg-Ma/Bw , Point Wiring In Pvc Trunking (Casing-Capping) With 1.5 Sq.Mm (2+1E) Frlsh Grade Copper Wire, Flush Type Switch,Earthing And Required Accessories As Per Specification No. Wg-Pw/Sw , Supplying And Erecting Flush Type, Shockproof Plug Socket 6 Pin 6A And 16A With Switch 16A Combined Unit Erected On Filled Polypropylene Board Or Double Wooden Block / 3Mm Thick Hylam Sheet / 4Mm Thick Plywood Pasted With 1.5Mm Thick Sunmica With S M Screws And Duly Connected , Supplying And Erecting Electronic Type Step Regulator For Ceiling Fan 600/ 900/ 1200/ 1400 Mm. Sweep, Complete Erected On Provided Switch Board. , Dismantling The Existing Light, Fan, Bell, Clock, Independent Plug Point,Wiring Including Circuit Mains Of All Types Along With Accessories Etc. Complete As Per Specification No. Wg-Dm/Pw (Electrical Installation Of Point Wiring Along With Circuit Mains From Dbs Shall Be Dismantled With Adequate Care Without Damaging Surface Of Wall, Ceiling, And Flooring. The Holes Shall Be Refinished To Match With The Surrounding Surface. Site Shall Be Made Clean By Removing Debris. , Supply, Installing, And Testing Of Maintenance Free Earthing Comprising Ofelectrode Of 17.2 Mm Diameter Low Carbon Steel With 250 Micron Molecular Copper Bonded Earthing Rod Of Length 3M Along With Carbon Based Environment Friendly Back Fill Ground Enhancing Compound Required To Fill Up The Excavated Earth With Required Quantity (Min. 125Kg) Complete, And Recording The Results Specification No. Ea-Mf , Supplying, Erecting & Terminating Xlpe Insulated 1100 V 3 Core 70 Sqmm + 1 Core 50 Aerial Bunched Aluminium Cable Along With Necessary Accessories For Lt Distribution On Provided Lt Pole As Per Specification No. Oh-Cbl/Abc , Supplying And Erecting Single Phase Smart Energy Meter Dlms Compliancewith 240V 50 Cycles Ac Supply 5-30 A, Accuracy Class 1.0 With Backlit Lcddisplay, Measuring & Display Kwh, V, I, Kw, Day, Week, Month & Withcommunication Module Configurable For Gsm/Wi-Fi, Irda/Bluetooth, Complete Provided Panel With Calibration Certificate From Manufacturer & Duly Wired With Required Size Of Pvc Wires. , Providing & Erecting 4 Pole Mccb 415V, 400A, Rated Short-Circuit Breaking Capacity 36 Ka (Ics=100% Of Icu), Adjustable Thermal (Overload) Setting And Adjustable Magnetic Setting With Provided Leads, Provision For Installation Of Shunt/ Uv/ Trip Alarm Contact. Mccb Should Have Phase Barriers Both Sides, With Insulation Withstand Capacity 800V, No Line-Load Bias In Provided Enclosure /Panel As Per Specification No. Sw-Mccb , Supplying And Erecting Led Square / Circular Max. 25 W Down Lighter /Panel Light Having Pressure Die-Cast Aluminium Housing, Polystyrene Diffuser Having System Lumens Output Of Min. 2750 Lumens, Min. Efficacy Of 110 Lumen/W, Cri>80, Cct Upto 6500K, Beam Angle Of 120 Deg., Max. Ripple Of 5%, Thd<10%, P.F. >0.95, Operating Range Of 120-270V, Surge Protection Of 2.5 Kv, Life Class Of 50,000 Hrs At L70b50 Including Driver, Having Mounting Arrangement With Board For Surface Type Or Spring Loaded Mounting Clips Complete With Minimum 2 Years Warranty As Per Specification No. Fg-Idf/Led. , Supplying, Erecting & Terminating Fr Xlpe Insulated, Galvanised Steel Wirearmoured (Round) Cable, 1100 V 4 Core 6 Sq. Mm. Aluminium Conductorcomplete Erected With Glands & Lugs On Wall/ Trusses/Pole Or Laid In Provided Trench/ Pipe As Per Specification No. Cb-Lt/Al , Supplying And Erecting Single Pole And Neutral Distribution Board (Spndb), With 2 Ways For Incoming And 10 Ways (10 Poles) For Outgoing Sp Mcbs, With Door, 1.2Mm Thickness Surface/Flush Mounted, Ip 43 Protection Provided On Iron/Gi Frame As Per Specification No. Sw-Mcbdb , Supply And Erecting Staff Calling System With Light Indicator For Room In Which Buzzer Engaged Suitable For Vip Guest House Of Ballarpur Area , Supplying And Erecting 25W Led Flexible Strip Light 5M Lengthconforming Ip 65 ( And Of Colour Specified By Engineer-In Charge) With Driver Complete. Specifications: Minimum Lumens Output Of 400 Lumens/M, Min. Efficacy Of 90 Lumen/W, Cri>80, Cct Upto 5000K, Beam Angle Of 110 Deg., Thd<10%, P.F.>0.95, Operating Range Of 230-270V, Life Class Of 30,000 Hrs. At L70b50, Including Driver With 1 Year Warranty. , Supplying & Erecting On Load Change Over Switch 4 Pole, 415V, 315-320A, Open Execution Having Staggered Termination, Phase Barrier, Shroud Termination And Terminal Cover Along With Auxiliary Contacts And Ready To Upgrade With Fuse Protection Kit, Operational Current Category Ac23a Complying To Is/Iec 60947-3 Part-1/3 As Per Specification No. Sw-Swr/Cos. , Supplying And Erecting Programmable Digital Almanac Timer Microcontroller Based With Real Time Clock To Operate On Derived Switching On And Switching Off Street Light As Per Daily Sunset And Sunrise Respectively Automatically Having 4 Digit Led Continuous Time Display, Relay Output 230V / 10A With 10 Hrs. Battery Backup And Manual Over Drive Facility Capable To Drive Different Capacity Contactors Timer Erected In Provided M.S. Box. , Providing & Erecting 4 Pole Mccb, 415V, 160A, Rated Short-Circuit Breaking Capacity 25 Ka (Ics=100% Of Icu), Adjustable Thermal (Overload) Setting And Adjustable Magnetic Setting With Provided Leads, Provision For Installation Of Shunt/Uv/Trip Alarm Contact. Mccb With Phase Barriers On Both Sides, Insulation Withstand Capacity 800V, No Lineload Bias In Provided Enclosure/Panel As Per Specification No. Sw-Mccb , Providing & Erecting 4 Pole Mccb 415V, 250A, Rated Short-Circuit Breaking Capacity 36 Ka (Ics=100% Of Icu) Adjustable Thermal (Overload) Setting And Adjustable Magnetic Setting With Provided Leads, Provision For Installation Of Shunt/Uv/Trip Alarm Contact. Mccb Should Have Phase Barriers Both Sides, With Insulation Withstand Capacity 800V, No Line-Load Bias In Provided Enclosure/Panel As Per Specification No. Sw-Mccb
BOQ
| Sl. No. | Item Title | Item Description |
| 1 | Supplying & erecting fuse bridges with base HC type fuse links 240V, 63A erected on polished wooden block | Supplying & erecting fuse bridges with base HC type fuse links 240V, 63A erected on polished wooden block |
| 2 | Supplying and erecting single pole and neutral distribution board (SPNDB), with 2 ways for incoming and 4 ways (4 poles) for outgoing SP MCBs, with door, 1.2mm thickness surface/flush mounted, IP 43 Protection on provided iron/GI frame as per specification no. SW-MCBDB | Supplying and erecting single pole and neutral distribution board (SPNDB), with 2 ways for incoming and 4 ways (4 poles) for outgoing SP MCBs, with door, 1.2mm thickness surface/flush mounted, IP 43 Protection on provided iron/GI frame as per specification no. SW-MCBDB |
| 3 | Supplying and erecting single pole and neutral distribution board (SPNDB), with 2 ways for incoming and 6 ways (6 poles) for outgoing SP MCBs, with door, 1.2mm thickness surface/flush mounted, IP 43 Protection on provided iron/GI frame as per specification no. SW-MCBDB | Supplying and erecting single pole and neutral distribution board (SPNDB), with 2 ways for incoming and 6 ways (6 poles) for outgoing SP MCBs, with door, 1.2mm thickness surface/flush mounted, IP 43 Protection on provided iron/GI frame as per specification no. SW-MCBDB |
| 4 | Supplying and erecting single pole and neutral distribution board (SPNDB), with 2 ways for incoming and 8 ways (8 poles) for outgoing SP MCBs, with door, 1.2mm thickness surface/flush mounted, IP 43 Protection on provided iron/GI frame as per specification no. SW-MCBDB | Supplying and erecting single pole and neutral distribution board (SPNDB), with 2 ways for incoming and 8 ways (8 poles) for outgoing SP MCBs, with door, 1.2mm thickness surface/flush mounted, IP 43 Protection on provided iron/GI frame as per specification no. SW-MCBDB |
| 5 | Supplying, erecting and marking double pole isolator only switch version of miniature circuit breaker of 40A with required wiring connections and lugs etc. in provided distribution board | Supplying, erecting and marking double pole isolator only switch version of miniature circuit breaker of 40A with required wiring connections and lugs etc. in provided distribution board |
| 6 | Supplying, erecting & marking SP MCB 6A to 32A, C-series with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-MCB | Supplying, erecting & marking SP MCB 6A to 32A, C-series with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-MCB |
| 7 | Supplying, erecting & commissioning 2 pole RCCB 40A, electromagnetic type with 30/100/300 mA sensitivity with earth leakage trip indication complete as per specification no. SW-RCCB | Supplying, erecting & commissioning 2 pole RCCB 40A, electromagnetic type with 30/100/300 mA sensitivity with earth leakage trip indication complete as per specification no. SW-RCCB |
| 8 | Supplying & erecting mains with 2x2.5 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/bus bars or any other places. as per specification no. WG-MA/BW | Supplying & erecting mains with 2x2.5 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/bus bars or any other places. as per specification no. WG-MA/BW |
| 9 | Supplying & erecting mains with 2x4 sq.mm FRLSH copper PVC insulated wire laid in provided onduit/trunking/inside pole/bus bars or any other places. as per specification no. WG-MA/BW | Supplying & erecting mains with 2x4 sq.mm FRLSH copper PVC insulated wire laid in provided onduit/trunking/inside pole/bus bars or any other places. as per specification no. WG-MA/BW |
| 10 | Point wiring in PVC trunking (casing-capping) with 1.5 sq.mm (2+1E) FRLSH grade copper wire, flush type switch,earthing and required accessories as per specification no. WG-PW/SW | Point wiring in PVC trunking (casing-capping) with 1.5 sq.mm (2+1E) FRLSH grade copper wire, flush type switch,earthing and required accessories as per specification no. WG-PW/SW |
| 11 | Supplying and erecting flush type, shockproof plug socket 6 pin 6A and 16A with switch 16A combined unit erected on filled polypropylene board or double wooden block / 3mm thick hylam sheet / 4mm thick plywood pasted with 1.5mm thick sunmica with S M screws and duly connected | Supplying and erecting flush type, shockproof plug socket 6 pin 6A and 16A with switch 16A combined unit erected on filled polypropylene board or double wooden block / 3mm thick hylam sheet / 4mm thick plywood pasted with 1.5mm thick sunmica with S M screws and duly connected |
| 12 | Supplying and erecting electronic type step regulator for ceiling fan 600/ 900/ 1200/ 1400 mm. sweep, complete erected on provided switch board. | Supplying and erecting electronic type step regulator for ceiling fan 600/ 900/ 1200/ 1400 mm. sweep, complete erected on provided switch board. |
| 13 | Dismantling the existing light, fan, bell, clock, independent plug point,wiring including circuit mains of all types along with accessories etc. complete as per specification no. WG-DM/PW (Electrical installation of point wiring along with circuit mains from DBs shall be dismantled with adequate care without damaging surface of wall, ceiling, and flooring. The holes shall be refinished to match with the surrounding surface. Site shall be made clean by removing debris. | Dismantling the existing light, fan, bell, clock, independent plug point,wiring including circuit mains of all types along with accessories etc. complete as per specification no. WG-DM/PW (Electrical installation of point wiring along with circuit mains from DBs shall be dismantled with adequate care without damaging surface of wall, ceiling, and flooring. The holes shall be refinished to match with the surrounding surface. Site shall be made clean by removing debris. |
| 14 | Supply, installing, and testing of maintenance free earthing comprising ofelectrode of 17.2 mm diameter Low Carbon Steel with 250 micron molecular copper bonded earthing rod of Length 3m along with Carbon based environment friendly back fill ground enhancing compound required to fill up the excavated earth with required quantity (min. 125kg) complete, and recording the results specification no. EA-MF | Supply, installing, and testing of maintenance free earthing comprising ofelectrode of 17.2 mm diameter Low Carbon Steel with 250 micron molecular copper bonded earthing rod of Length 3m along with Carbon based environment friendly back fill ground enhancing compound required to fill up the excavated earth with required quantity (min. 125kg) complete, and recording the results specification no. EA-MF |
| 15 | Supplying, erecting & terminating XLPE insulated 1100 V 3 Core 70 sqmm + 1 Core 50 Aerial bunched aluminium cable along with necessary accessories for LT distribution on provided LT pole as per specification no. OH-CBL/ABC | Supplying, erecting & terminating XLPE insulated 1100 V 3 Core 70 sqmm + 1 Core 50 Aerial bunched aluminium cable along with necessary accessories for LT distribution on provided LT pole as per specification no. OH-CBL/ABC |
| 16 | Supplying and erecting single phase smart energy meter DLMS compliancewith 240V 50 cycles AC supply 5-30 A, accuracy class 1.0 with backlit LCDdisplay, measuring & display kWh, V, I, kW, day, week, month & withcommunication module configurable for GSM/Wi-Fi, IrDA/Bluetooth, complete provided panel with calibration certificate from manufacturer & duly wired with required size of PVC wires. | Supplying and erecting single phase smart energy meter DLMS compliancewith 240V 50 cycles AC supply 5-30 A, accuracy class 1.0 with backlit LCDdisplay, measuring & display kWh, V, I, kW, day, week, month & withcommunication module configurable for GSM/Wi-Fi, IrDA/Bluetooth, complete provided panel with calibration certificate from manufacturer & duly wired with required size of PVC wires. |
| 17 | Providing & erecting 4 Pole MCCB 415V, 400A, rated short-circuit breaking capacity 36 kA (Ics=100% of Icu), adjustable thermal (overload) setting and adjustable magnetic setting with provided leads, provision for installation of shunt/ UV/ trip alarm contact. MCCB should have phase barriers both sides, with insulation withstand capacity 800V, no line-load bias in provided enclosure /panel as per specification no. SW-MCCB | Providing & erecting 4 Pole MCCB 415V, 400A, rated short-circuit breaking capacity 36 kA (Ics=100% of Icu), adjustable thermal (overload) setting and adjustable magnetic setting with provided leads, provision for installation of shunt/ UV/ trip alarm contact. MCCB should have phase barriers both sides, with insulation withstand capacity 800V, no line-load bias in provided enclosure /panel as per specification no. SW-MCCB |
| 18 | Supplying and erecting LED square / circular Max. 25 W down lighter /Panel Light having pressure die-cast aluminium housing, polystyrene diffuser having system lumens output of Min. 2750 Lumens, min. efficacy of 110 lumen/W, CRI>80, CCT upto 6500K, Beam Angle of 120 deg., max. ripple of 5%, THD<10%, p.f. >0.95, operating range of 120-270V, surge protection of 2.5 kV, Life class of 50,000 Hrs at L70B50 including driver, having mounting arrangement with board for surface type or spring loaded mounting clips complete with minimum 2 years warranty as per specification No. FG-IDF/LED. | Supplying and erecting LED square / circular Max. 25 W down lighter /Panel Light having pressure die-cast aluminium housing, polystyrene diffuser having system lumens output of Min. 2750 Lumens, min. efficacy of 110 lumen/W, CRI>80, CCT upto 6500K, Beam Angle of 120 deg., max. ripple of 5%, THD<10%, p.f. >0.95, operating range of 120-270V, surge protection of 2.5 kV, Life class of 50,000 Hrs at L70B50 including driver, having mounting arrangement with board for surface type or spring loaded mounting clips complete with minimum 2 years warranty as per specification No. FG-IDF/LED. |
| 19 | Supplying, erecting & terminating FR XLPE insulated, galvanised steel wirearmoured (round) cable, 1100 V 4 core 6 sq. mm. aluminium conductorcomplete erected with glands & lugs on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL | Supplying, erecting & terminating FR XLPE insulated, galvanised steel wirearmoured (round) cable, 1100 V 4 core 6 sq. mm. aluminium conductorcomplete erected with glands & lugs on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL |
| 20 | Supplying and erecting single pole and neutral distribution board (SPNDB), with 2 ways for incoming and 10 ways (10 poles) for outgoing SP MCBs, with door, 1.2mm thickness surface/flush mounted, IP 43 Protection provided on iron/GI frame as per specification no. SW-MCBDB | Supplying and erecting single pole and neutral distribution board (SPNDB), with 2 ways for incoming and 10 ways (10 poles) for outgoing SP MCBs, with door, 1.2mm thickness surface/flush mounted, IP 43 Protection provided on iron/GI frame as per specification no. SW-MCBDB |
| 21 | Supply and erecting Staff calling system with light indicator for room in which buzzer engaged suitable for VIP guest house of Ballarpur Area | Supply and erecting Staff calling system with light indicator for room in which buzzer engaged suitable for VIP guest house of Ballarpur Area |
| 22 | Supplying and erecting 25W LED flexible strip light 5m lengthconforming IP 65 ( and of colour specified by Engineer-In charge) with driver complete. Specifications: minimum lumens output of 400 Lumens/m, min. efficacy of 90 lumen/W, CRI>80, CCT upto 5000K, Beam Angle of 110 deg., THD<10%, p.f.>0.95, operating range of 230-270V, Life class of 30,000 Hrs. at L70B50, including driver with 1 year warranty. | Supplying and erecting 25W LED flexible strip light 5m lengthconforming IP 65 ( and of colour specified by Engineer-In charge) with driver complete. Specifications: minimum lumens output of 400 Lumens/m, min. efficacy of 90 lumen/W, CRI>80, CCT upto 5000K, Beam Angle of 110 deg., THD<10%, p.f.>0.95, operating range of 230-270V, Life class of 30,000 Hrs. at L70B50, including driver with 1 year warranty. |
| 23 | Supplying & erecting ON LOAD change over switch 4 Pole, 415V, 315-320A, open execution having staggered termination, phase barrier, shroud termination and terminal cover along with auxiliary contacts and ready to upgrade with fuse protection kit, operational current category AC23A complying to IS/IEC 60947-3 Part-1/3 as per specification no. SW-SWR/COS. | Supplying & erecting ON LOAD change over switch 4 Pole, 415V, 315-320A, open execution having staggered termination, phase barrier, shroud termination and terminal cover along with auxiliary contacts and ready to upgrade with fuse protection kit, operational current category AC23A complying to IS/IEC 60947-3 Part-1/3 as per specification no. SW-SWR/COS. |
| 24 | Supplying and erecting programmable digital almanac timer microcontroller based with real time clock to operate on derived switching “ON” and switching “OFF” street light as per daily sunset and sunrise respectively automatically having 4 digit LED continuous time display, relay output 230V / 10A with 10 hrs. battery backup and manual over drive facility capable to drive different capacity contactors timer erected in provided M.S. box. | Supplying and erecting programmable digital almanac timer microcontroller based with real time clock to operate on derived switching “ON” and switching “OFF” street light as per daily sunset and sunrise respectively automatically having 4 digit LED continuous time display, relay output 230V / 10A with 10 hrs. battery backup and manual over drive facility capable to drive different capacity contactors timer erected in provided M.S. box. |
| 25 | Providing & erecting 4 Pole MCCB, 415V, 160A, rated short-circuit breaking capacity 25 kA (Ics=100% of Icu), adjustable thermal (overload) setting and adjustable magnetic setting with provided leads, provision for installation of shunt/UV/trip alarm contact. MCCB with phase barriers on both sides, insulation withstand capacity 800V, no lineload bias in provided enclosure/panel as per specification no. SW-MCCB | Providing & erecting 4 Pole MCCB, 415V, 160A, rated short-circuit breaking capacity 25 kA (Ics=100% of Icu), adjustable thermal (overload) setting and adjustable magnetic setting with provided leads, provision for installation of shunt/UV/trip alarm contact. MCCB with phase barriers on both sides, insulation withstand capacity 800V, no lineload bias in provided enclosure/panel as per specification no. SW-MCCB |
| 26 | Providing & erecting 4 Pole MCCB 415V, 250A, rated short-circuit breaking capacity 36 kA (Ics=100% of Icu) adjustable thermal (overload) setting and adjustable magnetic setting with provided leads, provision for installation of shunt/UV/trip alarm contact. MCCB should have phase barriers both sides, with insulation withstand capacity 800V, no line-load bias in provided enclosure/panel as per specification no. SW-MCCB | Providing & erecting 4 Pole MCCB 415V, 250A, rated short-circuit breaking capacity 36 kA (Ics=100% of Icu) adjustable thermal (overload) setting and adjustable magnetic setting with provided leads, provision for installation of shunt/UV/trip alarm contact. MCCB should have phase barriers both sides, with insulation withstand capacity 800V, no line-load bias in provided enclosure/panel as per specification no. SW-MCCB |
AI Tender Summary
Tender Timeline
Tender Published
Tender notice published.
CompletedBid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 9 daysBid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 10 daysTender Documents
Download All (ZIP) ↓We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender