Tender For Lawn Development Along With Other Allied Works Of Community Hall At Behrar
Tender Value
30 Lakhs
Estimated cost
Bid Submission
09 Nov 2026
13 days left
EMD
60000
Bank guarantee accepted
Document Fee
1100
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Srinagar → Jammu and Kashmir
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Lawn Development Along With Other Allied Works Of Community Hall At Behrar
BOQ
| Sl. No. | Item Description |
| 1 | Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 Sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed: All kinds of soil : 1 meter from cutting edge |
| 2 | Earth work in bulk excavation by mechanical means (hydraulic excavator) over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 m2 on plan) including disposal of excavated earth lead upto 50 meters and lift upto 1.5 m, as directed by Engineer-in-Charge. |
| 3 | Earth work in surface excavation not exceeding 30 cm in depth but exceeding 1.5 m in width as well as 10 Sqm on plan including disposal of excavated earth, lead upto 50 meter and lift upto 1.5m, as directed by Engineer-in-Charge. All kinds of soil : |
| 4 | Providing and laying Stone solling including compacting, watering including all carriages complete |
| 5 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centering and shuttering. All work upto plinth level with: 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) |
| 6 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centering and shuttering. All work upto plinth level with: 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) |
| 7 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centering and shuttering. All work upto plinth level with: 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) |
| 8 | Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) |
| 9 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level: Thermo-Mechanically Treated bars of grade Fe-500D or more |
| 10 | Centering and shuttering including strutting, propping etc. and removal of form for: Foundations, footings, bases of columns etc. for mass concrete. |
| 11 | Providing and Fixing of Readymade Polycrate Manhole frame and cover of approved shape and standard size and as approved by EIC, including cost fittings and of all carriages (600mmx600mm) |
| 12 | Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in : Cement mortar 1:6 ( 1 cement : 6 coarse sand) |
| 13 | Cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc. complete. 40mm thick with 20 mm nominal size stone aggregate. |
| 14 | Providing and fixing 1st Quality Exterior Wall Tile Cladding of approved make like in all coloures, shades of any size as approved by Engineer in Charge laid over 12mm thick bed of cement mortar 1:4 (1 Cement: 4 Coarse Sand) |
| 15 | Chequerred precast cement concrete tiles 22mm thick in footpath and courtyard, jointed with neat cement slurry mixed with pigment to match the shade of the tiles, including rubbing, cleaning and curing complete, on 20 mm thick bed of cement mortar 1:4 (1 cement: 4 coarse sand). Light shade using white cement |
| 16 | 12mm Cement plaster of mix: 1 : 6 ( 1 cement : 6 fine sand) |
| 17 | EXTERIOR FINISHING: Finishing walls with water proofing cement paint of required shade on New work (two or more coats applied @ 3.84 kg/10sqm) |
| 18 | Finishing with Deluxe multi surface paint system for interiors and exteriors using primer as per manufacturers’ specifications: Painting steel work with deluxe multi surface paint of required shade to give an even shade. Two or more coats applied @ 0.90litre/10sqm over an under coat of primer applied @ 0.80litre/10sqm of approved brand and manufacture |
| 19 | Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete: Hot finished welded type tubes |
| 20 | Providing and fixing of Corrugated Powder coated sheet roofing including cost of screws, etc in roofs, walls, gables etc complete as per directions of EIC |
| 21 | Structural steel work in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. Welded |
| 22 | Removing of old damaged unserviceable PVC pipes of various Dias I/C necessary excavation/wherever required and laying and fixing of new PVC pipes of approved Brand and quality of Prince B Type including necessary fittings, all complete job. 150 mm |
| 23 | Removing of old damaged unserviceable PVC pipes of various Dias I/C necessary excavation/wherever required and laying and fixing of new PVC pipes of approved Brand and quality of Prince B Type including necessary fittings, all complete job. 100mm |
| 24 | Construction of Brick Masonry Manhole in Cement Mortar 1:4 (1 Cement 4: Coarse Sand), Foundation concrete (1:4:8) inside plastering 12 mm thick with cement mortar 1:3 (1 Cement 3: Coarse Sand) finished with floating coat of neat cement and making channel in cement concrete 1:2:4 (1 Cement:2 Coarse Sand: 4 Graded stone aggregate 20mm nominal size finished with a floating coat of neat Cement complete. Size 45x45x45 CM deep including PVC Manhole cover with frame Complete including all materials, labour and accessories as required at site and directed by EIC |
| 25 | Brick on edge flooring in required pattern with common burnt clay non modular bricks of class designation 7.5 on a bed of 12 mm cement mortar, including filling the joints with same mortar and curing complete. 1:6 ( 1cement : 6 coarse sand) |
| 26 | Supplying, Stacking, Laying and Spreading of good earth in layers free from all foreign material consolidating each deposited layer by ramming and watering with all carriages and from source to site including royalty (Earth Measured in stacks will be reduced by 20/% for payment). |
| 27 | Rought dressing of the trenched ground including breaking clods. |
| 28 | Grassing with “Doob” Grass (Turfing) of approved quality including watering and maintenance of the lawn for 120 days or more till the grass forms a thick lawn free from weeds and fit for mowing and supplying of good earth if needed(the good earth shall be paid separately) |
| 29 | Supplying and stacking of sand at site including spreading and levelling over Grass Turf including cost of loading, unloading and all carriages complete job. |
| 30 | Providing and fixing cast iron ornamental caps for MS 100x100mm pipes of approved design and finish, including all necessary fixing welding/fastening, labour and accessories, complete in all respects as required at site and as directed by the EIC. |
| 31 | Providing Wood Work (Budloo Wood) in Frames of False Ceiling, Partitions etc sawn and fixed in position: Budloo / Fir wood |
| 32 | Providing and fixing of 12mm thick Ply Wood in ceiling for base of Khatamband/Paneling etc excluding the cost of frame work. |
| 33 | Providing and fixing of KHATAM BANDI ceiling of first class Budloo/Fir wood excluding the cost of frame work which is to be paid separately |
| 34 | Providing and fixing brass curtain rods of wall thickness 1.25 mm with two brass brackets fixed with brass screws and wooden plugs etc. wherever necessary complete 25 mm diameter |
| 35 | Providing and laying Vitrified tiles in floor with different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS: 15622, of approved brand and manufacturer, in all colours and shades, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS: 15477, in average 6 mm thickness, including grouting of joints Size of tile 600x600 mm |
| 36 | CERAMIC GLAZED TILES: Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS :15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer- in-Charge, in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. |
| 37 | Providing and fixing gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations, of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels: 18mm (Area of slab over 0.5 sqm) |
| 38 | Varnishing with varnish of approved brand and manufacture: Two or more coats of glue sizing with copal varnish over and under coat of flatting varnish. |
| 39 | French spirit polishing, Two or more coats on new works including a coat of wood filler complete job as per directions of EIC |
| 40 | Providing and applying Plaster of Paris putty of 2mm thickness over plastered surface to prepare the surface even and smooth complete |
| 41 | Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade on New work (two or more coats) over and including priming coat with water thinnable cement primer |
| 42 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade, one or more coats on old work. |
| 43 | Providing and fixing powder coated aluminum doors of approved section including power coated aluminum Chowkats, 12mm thick MDF board or ACP paneling, hinges, aldrops, tower bolts, handles, locking arrangement and all necessary hardware and accessories; as required at site or as approved by the EIC, complete in fitted form. |
| 44 | Providing and fixing Jaffery/Jali work (Jallers) for windows, made of 20mm thick imported wood of approved design and pattern including cutting, shaping, fixing sanding and polishing with approved finish complete in all respects as required at site and as directed by the EIC. |
| 45 | Providing and Fixing of Pole Mount Stainless Steel Ornamental Garden Dust Bins 50 Ltr Capacity with Stand of approved make and design including all carriages and fixing charges complete. Cost shall include anchoring of base in concrete Foundation (1:2:4), complete Job |
| 46 | Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 liter low level white P.V.C. flushing cistern, including flush pipe with manually controlled device (handle lever), conforming to IS:7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: W.C. pan with ISI marked white solid plastic seat and lid. |
| 47 | Providing and fixing wash basin with C.I. brackets, 15mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required: White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps |
| 48 | Providing and fixing counter-mounted wash basin of approved make, shape, size, colour and design including waste coupling, bottle trap necessary fittings, connections and accessories, complete in all respects as per directions of EIC. |
| 49 | CPVC PIPES AND FITTINGS Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot and cold water supply, including all CPVC plain and brass threaded fittings. This includes jointing of pipes and fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer-in-charge. Internal work-exposed on wall, including fixing the pipe with clamps at 1.00 meter spacing: 25mm nominal outer dia pipes. |
| 50 | CPVC PIPES AND FITTINGS Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot and cold water supply, including all CPVC plain and brass threaded fittings. This includes jointing of pipes and fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer-in-charge. External work including trenching, refilling etc. 32mm nominal outer dia pipes |
| 51 | Providing and fixing of Plastic Bib Cock (Superior) of approved quality as approved by EIC. |
| 52 | Providing and Placing on terrace (at all floor levels) polythene water storage tank with cover and suitable locking arrangements and making necessary holes for inlet, outlet and overflow pipes but excluding all fittings and the base support for tank |
| 53 | Providing and fixing 15 mm nominal bore C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms |
| 54 | Providing and Fixing of Wash Basin Mixer of approved Make including all accessories complete. |
| 55 | Providing and Fixing of CP Angle Valve of approved Make including all accessories complete. |
| 56 | Providing and Fixing of Two in One Angle Valve of approved make including all accessories complete |
| 57 | Providing and Fixing of Wall Mixer of approved make including all accessories complete |
| 58 | Providing and Fixing of Health Faucet with chain of approved Make including all accessories complete. |
| 59 | Providing and Fixing of CP Towel Rod 600 MM Long of approved Make including all accessories complete. |
| 60 | Providing and Fixing of CP Soap Case of approved Make including all accessories complete. |
| 61 | Providing and Fixing of CP Connection 600MM-450MM Long of approved Make including all accessories complete. |
| 62 | Providing and Fixing of CP Grating of approved make including all accessories complete. |
| 63 | Providing and fixing C.P. Brass extension nipple (size 15mmx50mm) of approved make and quality as per direction of Engineer-incharge. |
| 64 | Providing and Fixing of CP Cups of approved Make including all accessories complete. |
| 65 | Providing and fixing of Stainless Steel Paper Holder with stand of approved make including all accessories complete. |
| 66 | Providing and fixing of Stainless steel paddle Operated Dustbin of approved make including all accessories complete. |
| 67 | Providing and Fixing of the 300mmx300mm Exhaust Fan (Crompton Make) as per approved specifications, complete. |
| 68 | Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. |
| 69 | Manufacturing supplying and fixing retro reflective overhead signage boards made up of 2mm thick aluminum sheet, face to be fully covered with high intensity and encapsulated lens type heat activated retro reflective sheeting conforming to type-III of ASTM-D-4956-01 as approved by Engineer-in-charge; letters, borders etc. as per IRC : 67-2001 in silver white with blue colour background and with high intensity grade, pasted on substrate by pressure sensitive adhesive backing which shall be activated by applying pressure conforming to class -II of ASTM-D-4956- 01 and fixing the same to the plate of structural frame work by means of suitable sized aluminum alloys, rivets or bolts and nuts @ 300mm c/c all along the periphery as well as in two vertical rows along with theft resistant measures including the cost of painting with two or more coats of epoxy paint in grey colour on the back side of aluminum sheet including appropriate priming coat. The rate includes the cost of rounding off the corners, lowering down the structural frame work from the gantry, fixing and erecting the same in position all complete as per drawing, specification and direction of Engineer-in-charge (Structural frame work including M.S. plate to be provided separately. Rectangular area of the sheet only shall be measured for payment). Overhead informatory road signage. |
| 70 | Providing and fixing of Glass Panes with Wooden Fillets of required size wherever necessary Glass Pans 3.5mm thick weighing 8.70 Kgs/Sqm |
| 71 | Providing, fabricating and fixing Main Entrance Doors in Stainless steel grade SS304. Fabricated from 25x25mm and 25x50, SS304 Sections or nay other SS304 sections of suitable size and profile as required for the approved design of approved gauge/brushing, SS304 hinges, handles, locking arrangement tower bolts, holdfasts/anchor fasteners and all necessary hardware accessories, labour, tools and tackles, complete in all respects as per approved design/drawing and direction of the EIC. The item shall include all materials, fabrication, transportation, erection and fixing complete. |
| 72 | Carriage of Material by MT: Sand |
| 73 | Aggregates |
| 74 | Bricks Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 19, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 09, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 13 daysNov 10, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 14 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender