Tender for Tender for Rate Call for Compact Leaf Inspired Decorative cnc Metal Motif Panel, Street Light Pole for mc Washim .
Tender Value
Ref. Documents
Estimated cost
Bid Submission
26 Oct 2026
6 days left
EMD
Ref. Documents
Bank guarantee accepted
Document Fee
1180
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Washim → Maharashtra
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Tender for Rate Call for Compact Leaf Inspired Decorative cnc Metal Motif Panel, Street Light Pole for mc Washim .
BOQ
| Sl. No. | Item Description |
| 1 | Providing, fabricating and installing compact leaf-inspired decorative CNC metal motif panel/frame, approximately 450 mm wide × 1,200 mm high above median top, at locations as directed by the Engineer-in-Charge. The work shall include laser-cut 2–3 mm thick decorative MS/GI sheet, fixed to a supporting frame fabricated from 40 × 40 × 2.5 mm MS square hollow section (SHS) pipe, with 50 × 50 × 3 mm MS square hollow section vertical support posts, subject to structural design approval. The item shall include designed base plates, anchor bolts, brackets and all necessary fixing accessories. Structural members, base plates, connections and anchorage shall be verified and approved by a qualified structural designer for applicable wind loads and site conditions. All steel components shall receive hot-dip galvanizing or an approved corrosion-protection treatment, followed by a compatible exterior-grade powder-coated finish in the approved colour. The work shall include cutting, welding, grinding, smooth edge finishing, transportation, installation, alignment, secure and tamper-resistant fixing, sealing of potential water-trapping points, labour, materials, tools and equipment required for complete execution. All exposed edges shall be free from sharp projections. Complete as per approved shop drawings, structural design and directions of the Engineer-in-Charge. |
| 2 | Providing, fabricating and fixing decorative leaf-motif sleeve/band for existing street-light poles, approximately 300 mm wide × 800 mm high, complete with laser-cut 2–3 mm thick decorative MS/GI sheet fixed to a supporting frame fabricated from 25 × 25 × 2 mm MS square hollow section (SHS) pipe, including split-clamp brackets, mounting plates, fasteners and necessary accessories. The sleeve/band shall be designed to suit the actual pole diameter and profile, with secure fixing without damaging the existing pole. All components shall receive hot-dip galvanizing or an approved corrosion-protection treatment followed by compatible exterior-grade powder coating in the approved colour. The work shall include fabrication, cutting, welding, grinding, smooth edge finishing, transportation, installation, alignment, labour, materials, tools and equipment, complete as per approved shop drawings and directions of the Engineer-in-Charge. Drilling, welding or permanent attachment to existing street-light poles shall not be permitted without prior written approval and verification of pole capacity by the competent authority. Where the existing pole cannot safely support the motif, an independently supported structure shall be provided under an approved design. |
| 3 | Providing, fabricating and fixing circular heritage/local-story artwork panel, nominal diameter 450 mm, made of 2–3 mm thick laser-cut MS/GI sheet or approved engraved metal/weatherproof composite panel, depicting approved Washim heritage, agriculture, environment or local-culture themes. The panel shall be fixed to a supporting frame fabricated from 25 × 25 × 2 mm MS square hollow section (SHS) pipe, including mounting brackets, concealed/secure fasteners and necessary accessories. The item shall include approved vector artwork preparation, cutting, engraving or fabrication, smooth edge finishing, anti-corrosion treatment, exterior-grade powder coating or approved weatherproof finish, replaceable artwork insert, transportation, installation, alignment, labour, materials, tools and equipment, complete as per approved shop drawings and directions of the Engineer-in-Charge. The contractor shall submit vector artwork and one full-size sample for approval before bulk fabrication. Installation shall maintain required traffic clearances and visibility. |
| 4 | Providing, fabricating and fixing civic identity/message fascia panel, nominal size 600 × 300 mm, comprising a 3 mm thick aluminium composite panel (ACP) or approved weather-resistant metal panel with dark charcoal background and contrasting exterior-grade lettering/graphics in Marathi and/or English. The panel shall include UV-resistant and weatherproof lettering/graphics, approved typography, anti-graffiti clear protective coating where suitable, concealed or flush-mounted secure fixing brackets and all necessary accessories. Where a metal support frame is required, it shall be fabricated from 25 × 25 × 2 mm MS square hollow section (SHS) pipe, with suitable corrosion protection and exterior-grade powder coating. The work shall include artwork/layout preparation, cutting, fabrication, edge finishing, transportation, installation, alignment, labour, materials, tools and equipment, complete as per approved drawings and directions of the Engineer-in-Charge. All text, logos and civic claims shall be approved by the competent authority before fabrication. |
| 5 | Providing, fabricating and installing Washim identity/gateway monument panel of indicative size 600 mm wide × 1,800 mm high at approved widened nodes, comprising an architectural stone-look finish or metal-faced panel with approved Washim Municipal Council name, emblem and bilingual lettering, including a supporting frame fabricated from 50 × 50 × 3 mm MS square hollow section (SHS) pipe, suitable base plates, anchor bolts, mounting brackets and necessary accessories. The metal components shall receive hot-dip galvanizing or an approved corrosion-protection treatment followed by exterior-grade powder coating. The panel shall include UV- and weather-resistant lettering/graphics, smooth edge finishing and optional concealed warm-white LED illumination with suitable outdoor-rated fixtures, drivers and protected wiring, as specified. The item shall include artwork preparation, fabrication, transportation, foundation and anchorage as per approved structural design, installation, alignment, electrical connections where applicable, testing and commissioning, labour, materials, tools and equipment, complete as per approved drawings and directions of the Engineer-in-Charge. The foundation, structural stability and wind resistance shall be designed and certified by a qualified structural designer. Installation shall be permitted only at surveyed widened nodes, subject to approval of the competent road authority and maintenance of required sight triangles, traffic visibility and clearances. |
| 6 | Providing and installing compact modular planter/pocket modules of approximate size 450 mm (W) × 600 mm (L) × 350 mm (H), manufactured from exterior-grade RCC, FRP or corrosion-protected metal, as approved by the Engineer-in-Charge. The unit shall include a durable weather-resistant finish, adequate drainage outlets, drainage layer and filter arrangement, root-zone protection, planting medium, and suitable provision for horticultural planting. Where a metal frame or support is required, it shall be fabricated using suitably sized MS SHS sections, tentatively 25 × 25 × 2 mm, with connections, base plates and anchor fasteners as required by the approved design. All exposed metalwork shall receive approved anti-corrosion treatment and exterior-grade powder coating or equivalent protective finish. The item shall include fabrication, supply, transportation, positioning, anchoring where necessary, finishing, drainage provisions and installation complete. The finished module shall not project beyond the existing median width or obstruct pedestrian movement, traffic visibility, drainage, utilities or access to street-light poles. Installation shall be restricted to surveyed clear spaces between poles and other features, subject to verification of median dimensions, structural capacity and approval of the Engineer-in-Charge. Final material, dimensions, fixing details and planting arrangement shall be approved before execution. |
| 7 | Providing, supplying and installing LED outline lighting for decorative leaf motif structures, comprising outdoor-rated, warm-white LED strip or linear luminaires of nominal 3000 K colour temperature, housed in compatible aluminium profiles with diffuser covers wherever required. LED assemblies exposed to weather shall have a minimum IP67 protection rating, with UV-resistant insulation, weatherproof end caps, sealed joints, connectors and mounting accessories. Aluminium profiles and brackets shall be securely fixed to the approved motif structure without damaging its protective coating. The system shall include suitably rated, accessible and replaceable LED drivers, weatherproof junction boxes, protected cabling, conduits, connectors, earthing, circuit protection and all necessary electrical accessories for a complete installation. Electrical connections shall comply with applicable electrical safety standards and be carried out by qualified personnel. Wattage, power supply, circuiting, cable sizing and driver capacity shall be finalised through an approved lighting design. The installation shall provide uniform illumination without glare, distraction or direct light spill towards road users. The item shall include supply, mounting arrangements, installation, testing, commissioning and all incidental work, complete as approved by the Engineer-in-Charge. |
| 8 | Providing, supplying and installing backlighting for heritage artwork panels using outdoor-rated LED modules or linear LED luminaires with suitable diffuser/backing arrangements to achieve uniform illumination without visible hotspots. The system shall include heat-management provisions, weatherproof enclosure, replaceable LED driver, sealed cable entries, suitable connectors and all necessary mounting accessories. LED components shall be protected against moisture, dust and outdoor exposure, with an appropriate IP rating selected for the installation conditions. The assembly shall be designed to prevent water ingress, overheating, glare and uneven light distribution. All wiring shall be suitably insulated, concealed or protected in approved conduits, and connected through appropriate electrical protection. The item shall include supply, installation, testing and commissioning, complete as approved by the Engineer-in-Charge. |
| 9 | Providing, supplying and installing concealed low-level linear LED accent lighting at designated decorative fascia sections, using warm-white LED luminaires of nominal 3000 K colour temperature, housed in exterior-grade aluminium channels with suitable diffuser covers. The system shall include replaceable LED segments, end caps, mounting brackets, protected cable entries, weatherproof connectors, suitable drivers, junction boxes and all required electrical accessories. Exposed LED assemblies shall have a minimum IP67 protection rating, while other components shall have IP protection appropriate to their actual exposure conditions. All metal channels and brackets shall have a durable corrosion-resistant finish. Wiring shall be concealed or suitably protected, with accessible provisions for maintenance and replacement. The installation shall provide uniform accent illumination without glare or distraction to road users. The item shall include supply, installation, electrical connections, testing and commissioning, complete as approved by the Engineer-in-Charge. |
| 10 | Providing, supplying and installing shielded outdoor LED uplights of indicative 10–15 W rating and nominal 3000 K colour temperature, suitable for illuminating selected artwork panels and planting features. Each fixture shall be outdoor-rated with a minimum IP65 protection rating, upgraded to IP67 wherever exposed to water accumulation, dirt or similar conditions. The luminaire shall incorporate glare-control shielding, a suitable beam angle, corrosion-resistant housing, secure mounting arrangements, replaceable driver, weatherproof cable glands and compatible electrical accessories. The beam shall be aimed towards the intended artwork or planting feature and away from drivers, pedestrians and adjoining properties. Wiring shall be suitably insulated and protected, with appropriate earthing and circuit protection. The item shall include supply, mounting, aiming, installation, testing and commissioning, complete as approved by the Engineer-in-Charge. |
| 11 | Providing, fabricating and installing pole-mounted civic message panels of indicative size 300 mm × 600 mm, manufactured from weather-resistant metal sheet or an approved equivalent material, with printed, engraved or digitally applied civic messages, municipal identity or public-awareness graphics. The panel shall have UV-resistant, weatherproof graphics and a durable corrosion-resistant finish suitable for outdoor exposure. Mounting shall be carried out using appropriately sized split-clamp brackets, anti-vibration provisions and tamper-resistant fasteners compatible with the actual pole diameter and geometry. Where support frames are required, they shall use suitably sized MS SHS sections, tentatively 25 × 25 × 2 mm, subject to structural and wind-load verification. No drilling, welding or permanent modification of existing street-light poles shall be undertaken without written approval from the competent authority. Panel size, mounting height, wind loading, pole capacity, traffic visibility and electrical clearances shall be verified before installation. The item shall include approved artwork, fabrication, mounting hardware, installation and finishing, complete as approved by the Engineer-in-Charge. |
| 12 | Providing, fabricating and installing semicircular ACP heritage artwork panel with integrated LED outline and landscape accent lighting, of indicative 6 inches (150 mm) fascia width × 6 feet (1,830 mm) height, forming an arch-shaped decorative feature. The panel shall be made from 4 mm thick exterior-grade ACP sheet with an approved weather-resistant finish, fixed over a suitably fabricated supporting framework using MS SHS sections, tentatively 25 × 25 × 2 mm, with brackets, stiffeners, fasteners and concealed joints as required. The visible ACP surface shall feature approved Washim heritage, agricultural or cultural artwork, executed either by hand painting using exterior-grade weather-resistant paints or by UV-resistant machine printing, as approved by the Engineer-in-Charge. Printed graphics shall be UV-protected and provided with a suitable protective coating or laminate; hand-painted artwork shall receive an appropriate exterior-grade clear protective coat. The semicircular profile shall be accurately cut, finished with compatible edge trims and sealed against moisture ingress. All exposed steel supports shall receive anti-corrosion treatment and an approved exterior-grade protective finish. Integrated outline lighting shall comprise warm-white LED strip/linear lighting of nominal 3000 K colour temperature, installed continuously along the semicircular profile in a compatible aluminium channel with diffuser, weatherproof end caps and concealed wiring. Exposed LED assemblies shall have a minimum IP67 protection rating and shall include suitable replaceable drivers, weatherproof connectors, junction boxes, protected conduits and electrical accessories. Additional shielded 10–15 W outdoor LED uplights, with a minimum IP65 rating and IP67 where required by exposure, may be provided to illuminate the artwork and adjoining planting, subject to the approved lighting layout. The complete installation shall include mounting brackets, anchoring, electrical connections, circuit protection, earthing, fabrication, transportation, installation, artwork execution, finishing, testing and commissioning. Final panel geometry, ACP grade, support details, mounting height, wind-load resistance, lighting wattage and fixing arrangements shall be approved before execution. Installation shall not obstruct traffic visibility, reduce the usable median width or involve drilling/welding to existing street-light poles without written authorization. All work shall be completed to the satisfaction of the Engineer-in-Charge and competent road authority. |
| 13 | Providing, fabricating and installing a semicircular decorative mural panel of 6 ft (1,830 mm) overall height, with an indicative 6-inch (150 mm) wide arch border, fabricated from 4 mm thick exterior-grade ACP sheet, accurately cut to the approved semicircular profile and mounted on a supporting framework of MS SHS sections, tentatively 25 × 25 × 2 mm, including brackets, stiffeners, fasteners and concealed fixing arrangements. The central mural surface shall feature approved decorative artwork, nature-inspired graphics, abstract patterns or other contemporary visual designs, executed by hand painting using exterior-grade weather-resistant paints or UV-resistant machine printing, as approved by the Engineer-in-Charge. The artwork shall be protected with a suitable UV-resistant clear coating or protective laminate, with sealed edges, compatible edge trims and weatherproof joints. All exposed steel supports shall receive approved anti-corrosion treatment and exterior-grade protective coating. The semicircular border shall incorporate continuous warm-white LED outline lighting of nominal 3000 K colour temperature, installed in a compatible aluminium profile with diffuser, weatherproof end caps and concealed wiring. Exposed LED assemblies shall have a minimum IP67 protection rating and include suitable replaceable drivers, weatherproof connectors, junction boxes, protected conduits, earthing and circuit protection. Additional shielded outdoor LED uplights may be provided where specified in the approved lighting design. The item shall include artwork preparation, shop drawings, fabrication, mounting hardware, transportation, installation, electrical connections, finishing, testing and commissioning, complete as approved by the Engineer-in-Charge. Final dimensions, support sections, anchoring and wind-load resistance shall be verified through the approved design. |
| 14 | Providing and executing decorative hand painting on a semicircular of 6 ft overall height, including surface cleaning, preparation, application of compatible primer wherever required, and painting of approved decorative designs using high-quality exterior-grade, weather-resistant paints. The artwork shall be executed manually by a skilled artist with neat detailing, uniform colour application and an approved colour scheme. The completed painting shall be protected with a UV-resistant, weatherproof clear coat suitable for exterior exposure to prevent fading, peeling and deterioration. The design, colour combination and sample finish shall be approved by the Engineer-in-Charge before execution. The item shall include paints, primer, brushes, masking, surface preparation, labour, finishing and all incidental materials required to complete the hand painting satisfactorily. |
| 15 | Providing and applying exterior-grade stone-texture paint on wall surfaces, including cleaning and preparation of the substrate, removal of loose paint and dust, filling minor cracks and surface imperfections, and application of a suitable exterior primer. Apply approved stone-texture coating/paint using the specified roller, trowel or spray technique to achieve a uniform natural stone-like finish, texture and colour as per the approved sample. The coating shall be weather-resistant, UV-resistant, durable and suitable for exterior exposure. Application shall include necessary masking, protection of adjacent surfaces, uniform texture formation, corner detailing, touch-ups and final finishing. Material, shade, texture pattern and sample panel shall be approved by the Engineer-in-Charge before execution. The item shall include all materials, labour, tools, scaffolding where required and incidental work, complete as directed by the Engineer-in-Charge. |
| 16 | Providing, fabricating and fixing granite stone civic identity/message fascia panel, nominal size 600 × 300 × 20 mm thick, comprising approved dark-coloured granite stone with the name, civic identity or approved message engraved into the stone using CNC engraving or an equivalent precision engraving method. Engraved lettering shall be clearly legible and finished with approved contrasting infill where required. The item shall include stone cutting, edge polishing, engraving, surface finishing, suitable supporting backing where necessary, concealed/secure mechanical fixing using corrosion-resistant stainless-steel anchors and accessories, transportation, installation, alignment, labour, materials, tools and equipment, complete as per approved artwork, drawings and directions of the Engineer-in-Charge. The panel shall be weather-resistant, securely fixed and free from cracks, chips and visible defects. Marathi and/or English lettering shall follow standardized approved typography. Submit the granite sample, engraving layout and full-size artwork proof for approval before fabrication. |
| 17 | Providing and fixing FRP (Fibre Reinforced Plastic) civic identity monument panel, overall size 4'-0\\" (L) × 7'-6\\" (H), finished in an approved dark granite-like texture with curved top profile, raised/engraved-effect lettering displaying “WASHIM NAGAR PARISHAD” and the approved Marathi civic slogan, leaf emblem at the top and decorative heritage/landmark motif at the bottom. The work shall include moulded FRP construction with adequate internal stiffeners, UV-resistant weatherproof gel-coat finish, approved lettering and motifs, concealed LED illumination with weatherproof electrical accessories, necessary internal MS support frame and anchoring arrangements, and fixing securely on an RCC concrete base of approved dimensions. Rate shall include fabrication, moulding, finishing, transportation, installation, alignment, electrical connections, labour, materials, tools and equipment, complete as per approved design and directions of the Engineer-in-Charge. Submit colour samples, artwork, shop drawings and lighting details for approval before fabrication. |
| 18 | Providing, fabricating and installing FRP civic identity monument panel, overall size 4 ft (L) × 7.5 ft (H), made of high-quality, weather-resistant, UV-resistant FRP with premium dark granite-textured finish and curved top profile. The design shall include “WASHIM NAGAR PARISHAD” lettering, approved Marathi civic slogan, leaf emblem and heritage/landmark motif, with contrasting raised/engraved-effect lettering and integrated warm-white LED illumination. The item shall include FRP moulding, internal MS reinforcement wherever required, protective coating, concealed electrical wiring, LED modules, weatherproof accessories, transportation and installation. The monument shall be securely fixed on an RCC concrete base, including excavation, PCC/RCC work, reinforcement steel, shuttering, concreting, anchor fasteners and finishing, complete with all materials, labour, tools and equipment as per approved drawings and directions of the Engineer-in-Charge. |
| 19 | Design, Fabrication, Supply and Installation of Central Civic Unity Sculpture: Providing one central civic unity sculpture of approximately 3.2–3.6 m overall height, including a 600–1000 mm high plinth, with a sculptural element of 2.6–3.0 m height, comprising four abstract vertical blades/fins rising from a common base, symbolising Administration, Security, Justice and Development. The sculpture shall be fabricated in weather-resistant FRP (Fibre Reinforced Plastic) with an internal MS support framework wherever required, finished with exterior-grade UV-resistant automotive/PU paint in approved colours. Provide a reinforced cement concrete (RCC) foundation and plinth, clad with polished granite or locally available basalt, including base anchorage, engraved identification lettering and necessary reinforcement. All FRP components shall have adequate thickness, structural strength, smooth surfaces and weather-resistant coating suitable for outdoor installation. The work shall include approved design and shop drawings, fabrication, moulding, transportation, foundation preparation, installation, alignment, fixing, finishing and cleaning, complete in all respects. Provide concealed provisions for warm-white LED uplighting, with electrical fixtures and connections measured separately under the relevant BOQ item. The rate shall include all materials, labour, tools, equipment and incidental works required for complete installation as per approved drawings and instructions of the Engineer-in-Charge. Final dimensions, FRP thickness, internal framework, RCC foundation and anchorage shall be determined through approved design calculations and site conditions. Tentative overall size: 3.2–3.6 m high; plinth approximately 1.8 × 1.8 m to 2.4 × 2.4 m. |
| 20 | Design, Fabrication, Supply and Installation of Collector Office Identity Sculpture: Providing one governance and administration-themed vertical identity sculpture, approximately 2.5–3.0 m high above the plinth, with a pillar face width of approximately 450–600 mm. The sculpture shall comprise a dignified vertical pillar with one or two slender side fins and a simple civic crowning element, conveying authority, administration and public service. Fabricate using weather-resistant MS with hot-dip galvanising and exterior-grade powder coating or an approved bronze-look finish. SS 304 may be used where approved and justified by budget. Provide a suitable RCC foundation and plinth with granite or locally available basalt cladding, concealed anchorage, smooth edges and weather-resistant finishes. Engrave “COLLECTOR OFFICE – WASHIM” on the base or designated name band using durable, legible lettering. Any Ashoka/Lion Capital or other protected official emblem shall be used only with approval from the competent authority and in compliance with applicable usage rules; an abstract civic motif shall be the default option. The work shall include approved design and shop drawings, fabrication, surface treatment, transportation, foundation preparation, installation, alignment, fixing, finishing and cleaning, complete in all respects. Provide concealed provisions for warm-white LED uplighting; lighting fixtures, wiring and connections shall be measured separately under the relevant BOQ item. The rate shall include all materials, labour, tools, equipment and incidental works required for complete installation as per approved drawings and instructions of the Engineer-in-Charge. Final dimensions, structural members, foundation and anchorage shall be as per approved design and site conditions. |
| 21 | Design, fabrication, supply and installation of one contemporary shield-inspired identity sculpture representing public safety and protection, approximately 2.5–3.0 m high above the plinth, with an overall shield width of approximately 1.2–1.6 m. Fabricate an open shield outline using structural MS or SS, incorporating a central abstract star or protective motif. Use approximately 5–8 mm thick metal plate where structurally suitable, with smooth, rounded edges and concealed fixings. Provide suitable anti-corrosion treatment, followed by exterior-grade powder coating or an approved bronze-look finish. Include a suitable RCC foundation and plinth with stone cladding, anchorage and an engraved “SP OFFICE – WASHIM” name band. Police insignia, badges or official lettering shall be incorporated only after written approval from the competent authority. Include approved drawings, fabrication, transportation, installation, alignment, finishing and cleaning, complete in all respects. Provide concealed provisions for warm-white LED uplighting; lighting fixtures and electrical connections shall be measured separately. All dimensions, supports, foundation and anchorage shall be as per approved design and site conditions. |
| 22 | Design, fabrication, supply and installation of one abstract justice-themed sculpture, approximately 2.5–3.0 m high above the plinth, representing justice, equality and balance. The sculpture shall comprise a vertical central axis, a symmetrical horizontal beam and two balanced suspended shallow bowls or discs approximately 300–450 mm in diameter. Fabricate using corrosion-protected structural MS or SS, with adequate stiffeners, secure connections and concealed anchorage. The arms and bowls shall be structurally stable and designed to resist wind loads; minimise delicate moving components. Provide a suitable RCC foundation and plinth with stone cladding and an engraved “DISTRICT & SESSIONS COURT – WASHIM” name band. Apply a durable exterior-grade finish in an approved metal or bronze-look tone. Include approved drawings, fabrication, transportation, installation, alignment, finishing and cleaning, complete in all respects. Provide concealed provisions for warm-white accent uplighting; lighting fixtures and electrical connections shall be measured separately. Final dimensions and structural details shall be as per approved design and site conditions. |
| 23 | Design, fabrication, supply and installation of one tree- or growth-inspired identity sculpture, approximately 2.5–3.2 m high above the plinth, symbolising development, community welfare and progress. Fabricate a central metal stem or spine with 5–7 layered metal leaves or leaf-like blades, approximately 300–500 mm long, arranged in an upward-growing composition. Use approximately 4–6 mm thick MS plate where suitable, with folded edges, stiffeners and supports to prevent deformation. Provide suitable corrosion protection followed by exterior-grade powder coating or an approved bronze-look finish; SS may be used where approved and justified by budget. Ensure all leaf edges are smooth and safe. Provide a suitable RCC foundation and stone-clad plinth with secure anchorage and an engraved “ZILLA PARISHAD – WASHIM” name band. Include approved drawings, fabrication, transportation, installation, alignment, finishing and cleaning, complete in all respects. Provide concealed provisions for warm-white LED uplighting; lighting fixtures and electrical connections shall be measured separately. Final dimensions, supports, foundation and anchorage shall be as per approved design and site conditions. |
| 24 | Providing and fixing 5 durable identification plates or inscription assemblies, each approximately 300–450 mm wide × 150–250 mm high, for the central civic unity sculpture and four office identity sculptures. Plates may be fabricated from engraved stone, laser-cut metal lettering or etched stainless steel, subject to approval. Fix securely using concealed or anti-theft fasteners suitable for outdoor exposure. Provide consistent typography, alignment, legibility and contrasting finish. Text shall be in Marathi and/or English as approved by the administration. Include preparation and submission of text, spelling, language and artwork proofs for approval before fabrication. Provide suitable anti-corrosion protection and exterior UV- and weather-resistant finishing, complete with fixing, cleaning and all incidental works. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 19, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 26, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 6 daysOct 27, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 7 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender