Tender for Tender for In Nagar Panchayat Mailani Ward No. 7, Outside Maa Kali Temple Park, Tiranga And Beautification Work (National Flag Height 30 Meters And Two Led Focus Lights And Six Benches For Seating) Mailani N.P.
Tender Value
Ref. Documents
Estimated cost
Bid Submission
24 Oct 2026
0 days left
EMD
33000
Bank guarantee accepted
Document Fee
944
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Kheri → Uttar Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for In Nagar Panchayat Mailani Ward No. 7, Outside Maa Kali Temple Park, Tiranga And Beautification Work (National Flag Height 30 Meters And Two Led Focus Lights And Six Benches For Seating) Mailani N.P.
BOQ
| Sl. No. | Item Description |
| 1 | Supply&Fixing of 30 mtr High mast shaft of approved make with rising system hot dip glavanized inside & outside dip, heaving pole sheet thickness 4mm. Top dia minimum 150mm, Bottom dia 500 mm base plate 32mm thick suitable for wind velocity as per IS 875 part 3 heaving no circumferential weld,.......as per SI NO. 21.3.4 |
| 2 | Supply&Fixing of 6 mtr GI Octagonal pole of approved make ( Top dia 70mm, Bottam dia 130mm and base plate 12mm thick) having 3mm thikness with single arm bracket (1 Mtr length) on RCC foundation including the cost of foundation, foundation bolts excavation & back filling and Required T&P completee in all respect. as per SI No.21.2.6 |
| 3 | Supply & Laying of aluminium conductor cable PVC insulated armoured served sheathed cable 1100 volts grade at a depth of 750mm below ground level over a cushion of 75mm thick sand all around and protected with burnt bricks on sides and on top as directed by Engineer in charge with all complete of work for 10 sqmm 2 core as per SINo. 201.1.2 @ 0.8475 |
| 4 | Supply and Erection of 600mm long cross arm of 50mmx50mmx6mm mild steel angle iron with necessary clamps, bolts, nuts etc. on poles complete in all respect including painting with alluminium paint.. As per SI No. 625 |
| 5 | Supply and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVCconduit as required. As per DSR 1.17.20 for 2x4.0sq. Mm |
| 6 | System for raising lowering of flag. It shall have single drum winch ,6mm dia stainless steel wire rope & integral power tool for the raising & loweing of flag .Suitable control panal shall be provided for reversing operation of power tool single phase moter |
| 7 | S/F of 63 Amp TPN switch disconnector fuse unit (Panel mounted type) with ISI marked HRC fuses…complete DSR 2022 1602 |
| 8 | Supply of system & aviation obstruction light (Make to be specified ) with 2Cx2.5 sq.mm CU armared cable. 1 no. LED AOL per mast with Decorative doom |
| 9 | Supply&Fixing of Factory wired integral LED Flood light Luminaires with die cast aluminium housing with toughend glass/UV stabilized PC cover and lences built with mandatory driver set suitable for 170-200 Watt.confirming to IP 66, IK 07 protection complete in all respect with 5 year warranty SI No. 23.26 CAT AAA 17337.0x0.8475=14693.11 |
| 10 | Construction of Selfi Point Earth work excavation in Foundation soil (loam clay or sand) i/c lift upto 1.5 m. and lead upto 30m. & including filling, watering and ramming of excavated earth into space between the building and side complete work as per PWD DSR Sl.no. 2.8.1 |
| 11 | P/L in Cement Concrete in Foundation in 1:4:8 with 01 Cement 04 Course sand & 08 , 40 mm.Stone Ballast complete work as per PWD DSR Sl.no. 4.1.8 |
| 12 | M-150 Class Bk.work in 1:6 Cement & Course sand mortor in in foundation & Plinth including all supply of all matrials , labour & T& P etc. as per PWD CH 6, S.I.No. DAR 6.1.2 |
| 13 | M-150 Class Bk.work in 1:6 (1 Cement & 6 Course sand mortor in super structure including all supply of all matrials , labour & T& P etc. as per PWD CH 6, S.I.No. DSR 6.4.2 |
| 14 | 12 mm. thick plaster with cement, Coarse sand of 2.25 F.M. mortar in 1:6 I/C supply of all material labour & T & P etc. reqd. for proper Completion of work. as per PWD S.I.No DAR 13.4.2 |
| 15 | 40 mm P.Cement.Concrete .flooring in 1:2:4 cement, Course sand& Stone grit flooring all Labour and material complete work as per PWDCH-11 sl. no 11.3.1 |
| 16 | Provinding edge moulding to 18 mm thick Granite stone with cement Concrete base over 20 mm thick base cement morter 1:4 (1cement: 4 coarse sand ) etc including machine polishing to edge to give high gloss finish etc complete as per design approved by Engineer in charge .Granite work. As per DAR 8.2.2.2 |
| 17 | P/F stainless steel (Grade 304) railing made hollow tubes channels, plates etc inculding welding ,grinding , buffing ,polishing and making curvature (wherever required) and fitting As per DSR 10.28 |
| 18 | Providing & applying white cement based putty of average thickness 1 mm of approved brand and manufacturer over plasterd wall surface even and smoth surface including Supply of all material & Labour T & P etc. as per PWD S.I.No as DSR 13.80 |
| 19 | Finishing wall with two Coats with Premium Acrylic Smooth exteriour paint with cilicon additives of required shade@ 1.43. Ltr/ 10 Sqm including priming coat of exteriour primer applied @ 0.90 Ltr./ 10 Sqm as per PWD S.I.No DSR 13.47.1 |
| 20 | Supply & fixing of Black Granite 910x 610x 20 mm size including Lattering & Fixing including supply of all materials, labour and T & P etc Inaurgation including automatic curtan required for proper completion of work or as per direction by Engineer and photography, quality control as per Chapter 20(14) road work. |
| 21 | Earth work in excavation in foundation I/C all labour T&P etc. as per si no 251. |
| 22 | E/W cutting or filling in embankment in ordinary soil lead upto 1km and left upto 1.5m as per SI No. 2.25(a) |
| 23 | L.C. in 1:4:8 Stoen Ballast 40 mm stone including watering ramming etc. complete. As per si no-4.1.8 |
| 24 | Brick work in M-150 in 1:4 cement sand mortar in foundation up to plinth including all material, Labour, T&P etc.as per si no 6.1.1 |
| 25 | P/F 18mm thick gang saw cut, mirror polished premould and prepolished,machine cut plateform (1:4) cement and c sand , Raj nagar plain white marble./udaipur green marble Zebra black marble area of slab over 0.50 sqm as per si no 8.2.2.2 |
| 26 | Provinding edge moulding to 18 mm thick marble stone counters,vanilities etc including machine polishing to edge to give high gloss finish etc complete as per design approved by Engineer in charge .Granite work. As per DAR 8.3.2 |
| 27 | P/F stainless steel (Grade 304) railing made hollow tubes channels, plates etc inculding welding ,grinding , buffing ,polishing and making curvature (wherever required) and fitting As per DSR 10.28 |
| 28 | Erection of the FlagErection of the Flag mast with the help of suitable equipments & assembly of operating system (Cane) |
| 29 | Supply of National Flag of size 20x30feet in 100% knittes heavy polyyester GSM 160 wire reinfrced 3 side and rope/toggle sleeve with eye hight. Double stitched on all sides with included all |
| 30 | ADD GST @ 18% Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 19, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 24, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
TodayOct 24, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
TodayTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender