Tender For Providing Electrification , Audio Systems, & Special Plumbing Items For Theme Park In Shirdi Nagar Parishad Premises, Tal: Rahata, Distt: Ahmednagar.
Tender Value
1
Estimated cost
Bid Submission
31 Oct 2026
3 days left
EMD
1000
Bank guarantee accepted
Document Fee
100
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Ahmednagar → Maharashtra
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Providing Electrification , Audio Systems, & Special Plumbing Items For Theme Park In Shirdi Nagar Parishad Premises, Tal: Rahata, Distt: Ahmednagar.
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 26-Oct-2026 | Corrig | Date | 31-Oct-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | A) Electrical work IP BASED CCTV SYSTEMSupply, Installation, testing & commissioning of 1/3\\" CMOS IP IR Indoor Fixed Dome Cameras, up to 2 Megapixel Resolution, Auto Focus Fixed 2.8 mm Megapixel Lens, minimum 25 FPS, IR viewable length 30m, Power over Ethernet (POE), Colour : 0.04Lux (1/30sec, F1.4), 0.001Lux (2sec, F1.4), B/W : 0Lux (IR LED on) DWDR, AGC, BLC, digital zoom, motion detection, tempering, ONVIF, UL Listed. |
| 2 | Supply, Installation, testing & commissioning of 1/3\\" CMOS IP IR Indoor Varifocal Dome Cameras, up to 2 Megapixel Resolution, Auto Focus Varifocal 2.8-12 mm Megapixel Lens, minimum 25 FPS,IR viewable length 30m, Power over Ethernet (POE),Colour : 0.04Lux (1/30sec, F1.4), 0.001Lux (2sec, F1.4),B/W : 0Lux (IR LED on) DWDR, AGC, BLC, digital zoom, motion detection, tempering, IP 66, IK 10 ONVIF, UL Listed. |
| 3 | Providing and fixing of a single data cord grid plate mounted outlet unit (RJ-45) with molded cover plate in GI box complete as required for Data system. |
| 4 | Providing and fixing of a dual data cord grid plate mounted outlet unit (RJ-45) with molded cover plate in GI box complete as required for Data system. |
| 5 | Supply, installation, testing & commissioning of RJ 45 connectors, interfaces, Mounting hardware, Patch Cords, Fiber Patch Cord, HDMI/VGA cable ( min 15 meters) with connectors at both side, Jacks, Plugs, tags, identifiers, fixtures, clamps, screws, nut - bolts etc. as required for the installation and commissioning of the complete job. |
| 6 | Supply, laying, termination, testing and commissioning of 4 pair CAT 6 unarmoured cable in existing pipe /conduit or on existing cable tray including the cost of making of connections, complete as required. |
| 7 | Supply, laying, termination, testing and commissioning of 2 core 1.5 Sq.mm.copper power unarmoured cable in existing pipe /conduit or on existing cable tray including the cost of making of connections, complete as required. |
| 8 | Supply, laying, termination, testing and commissioning of 1100 V Grade PVC insulated FRLS Copper conductor wires of size 3 x 1.5 sq. mm. PVC insulated copper wire. in MS conduits including end terminations with lugs and terminal blocks, connections etc. complete as required. |
| 9 | SDB PANEL-(E-Zone)INCOMING : 1 No. 400A, TPN MCCB, 35 KA.BUSBAR\\"Electrolytic high conductivity aluminium three phase and neutral busbars having a maximum current density of 1 amp per sq mm suitable to with stand symmetrical fault level of 25 kA at 415 volts. Busbar-500 AMPOUTGOINGNote : Each outgoing feeder shall have 1 set of ON/OFF indicating lamps, 5No. 100Amp FP MCCB ,10 KA.2No. 150Amp FP MCCB ,10 KA.8No. 63Amp FP MCCB ,10 KA.3No. 40Amp DP MCCB ,10 KA. |
| 10 | B) AIRCONDITIONING WORK OF AUDITORIUM 1.Supply, Installation, Testing & Commissioning of factory built floor mounted Horizontal DX coil double skin type AHU complete Aerofoil Plug fan , as detailed below, fire retardent flexible connections, direct drive fan, compatible with DX VRV outdoor condensing unit,Including suitable expansion Kits with corded remote controller,TEFC motor of class 'F' insulation, efficiency class IE-3 motor, suitable for operation on 415 + 10% volts, 3 phase, 50 Hz,Pre Filters , including all connected accessories, AC supply, thermal break profile,Mixing Box, Drain connections, stainless steel drain pan complete with all fittings and accessories, necessary isolation arrangement, floor supports system complete as required & as specified with the following capacities. |
| 11 | 8,000 cfm, 45 mmwg S.P, (ODU-1x28HP) |
| 12 | 5,500 cfm, 45 mmwg S.P, (ODU-1x18HP) |
| 13 | 4,500 cfm, 45 mmwg S.P, (ODU-1x14HP) |
| 14 | 4,000 cfm, 40 mmwg S.P, (ODU-1x14HP) |
| 15 | 3,500 cfm, 40 mmwg S.P, (ODU-1x12HP) |
| 16 | B) AIRCONDITIONING WORK OF AUDITORIUM 2. Supply and installation of XLPE insulated, cores laid up, tape innersheathed, armoured copper cables for various equipments along with cable terminations lugs, metal glands, tagging with all accessories etc. through walls/ceiling with appropriate clamps & fixing arrangement for running on cable tray, as per specifications and drawings. |
| 17 | 4C-16 sqmm |
| 18 | 4C-10 sqmm |
| 19 | 4C-6 sqmm |
| 20 | 4C-4 sqmm |
| 21 | 3C-1.5 sqmm |
| 22 | B) AIRCONDITIONING WORK OF AUDITORIUM 3.Design, manufacture, supply, installation, testing and commissioning weather proof panel, front operated, cubicle construction, floor mounted type, fabricated out of 1.6 mm thick CRCA Sheet, Compartmentalized with hinged lockable doors, dust and vermin proof, Powder coated of approved shade, Cable alley, inter-connections, MFM meter along with indication of phase ON, panel have provision of trip in case of earth leakage, limit switch with indoor lighting, metal lock system and accessories mounting, internal wiring, earth terminals, Top cable entry, numberings etc. Rubber mats as per IS requirements.. suitable for operation of 415 volts, 3 phase, 4 wire, 50 Hz, AC Supply with enclosure protection class IP 55 complete as per specifications, requirement, standards and drawings with the following :a) 1 No.100 Amps INCOMING MCCB, 4Pb) 1 set 125 Amps TPN Aluminium conductor bus bar duly sleeved.c) 2 No.63 Amps TPN MCB-ELCB outgoing for 2 No. 14HP VRV ODU.d) 2 No.32 Amps TPN MCB outgoing along with 2No. DOL starter for 1 No.3.0/2.2KW AHU Motore) 1 No.32 Amps TPN MCB outgoing Sparef) 1 No.63 Amps TPN MCB-ELCB outgoing Spare |
| 23 | B) AIRCONDITIONING WORK OF AUDITORIUM 4.Design, manufacture, supply, installation, testing and commissioning weather proof panel, front operated, cubicle construction, floor mounted type, fabricated out of 1.6 mm thick CRCA Sheet, Compartmentalized with hinged lockable doors, dust and vermin proof, Powder coated of approved shade, Cable alley, inter-connections, MFM meter along with indication of phase ON, panel have provision of trip in case of earth leakage, limit switch with indoor lighting, metal lock system and accessories mounting, internal wiring, earth terminals, Top cable entry, numberings etc. Rubber mats as per IS requirements.. suitable for operation of 415 volts, 3 phase, 4 wire, 50 Hz, AC Supply with enclosure protection class IP 55 complete as per specifications, requirement, standards and drawings with the following :a) 1 No.80 Amps INCOMING MCCB, 4Pb) 1 set 100 Amps TPN Aluminium conductor bus bar duly sleeved.c) 1 No.63 Amps TPN MCB-ELCB outgoing for 1 No. 14/18HP VRV ODU.d) 1 No.32 Amps TPN MCB outgoing along with 1No. DOL starter for 1 No.3.0/2.2KW AHU Motore) 1 No.32 Amps TPN MCB outgoing Sparef) 1 No.63 Amps TPN MCB-ELCB outgoing Spare |
| 24 | B) AIRCONDITIONING WORK OF AUDITORIUM 5.Design, manufacture, supply, installation, testing and commissioning weather proof panel, front operated, cubicle construction, floor mounted type, fabricated out of 1.6 mm thick CRCA Sheet, Compartmentalized with hinged lockable doors, dust and vermin proof, Powder coated of approved shade, Cable alley, inter-connections, MFM meter along with indication of phase ON, panel have provision of trip in case of earth leakage, limit switch with indoor lighting, metal lock system and accessories mounting, internal wiring, earth terminals, Top cable entry, numberings etc. Rubber mats as per IS requirements.. suitable for operation of 415 volts, 3 phase, 4 wire, 50 Hz, AC Supply with enclosure protection class IP 55 complete as per specifications, requirement, standards and drawings with the following :a) 1 No.150 Amps INCOMING MCCB, 4Pb) 1 set 200 Amps TPN Aluminium conductor bus bar duly sleeved.c) 2 No.80 Amps TPN MCB-ELCB outgoing for 1 No. 28HP VRV ODU.d) 1 No.32 Amps TPN MCB outgoing along with 1No. DOL starter for 1 No.3.0/5.5KW AHU Motor.e) 1 No.32 Amps TPN MCB outgoing Sparef) 1 No.80 Amps TPN MCB-ELCB outgoing Spare |
| 25 | B) AIRCONDITIONING WORK OF AUDITORIUM 6.Supply, installation, testing and commissioning of industrial type propeller fans with inbuilt gravity louvers,fan shall be directly driven, Motor shall be 230+/-,50Hz,1Ph, AC supply. |
| 26 | 450 mm dia,1400RPM |
| 27 | 300 mm dia,1400RPM |
| 28 | B) AIRCONDITIONING WORK OF AUDITORIUM 7. WEATHER PROCTECTIVE COATING ON EXPOSED VRV PIPESSupply and applying of Fevicol Weather Protekt Coat or equivalent water based fire retardant coat, flexible, vapour barrier, high solid coat which imparts tough mechanical protection and durable seal against water, moisture & weathering. It is ideal for protecting all types of Insulation material used in Hot and Cold Insulation used in any type of Industrial / HVAC applications. (Exposed VRV pipes only) (TDS shall be submitted after approval only work will be done). |
| 29 | C) SITC of 7D Theatre (Entec Zone) 1. 7D Seats and Effects |
| 30 | Supply, Installation, Testing & Commissioning of Pneumatic Seats:4 seater Pneumatic seats comprising of FRP shell with detachable cushioning and cover, grab handles, Fabricated rectangular structures for base to fix cylinders, floating joints, 4 seater motion base fabricated with C-Channels of total 40 ft. length, Control gears and pneumatic equipment installed under the seats (accessible for maintenance). Separate pneumatic circuits for motion and SFX incorporating pressure regulator and micron filter.Effects installed in the seats: Neck Blast: provided from the Back Cushion of seat through an orifice. The air pressure is 2 bar. Back Vibrator: through vertical seat back, controlled by a compact cylinder directed by a separate Solenoid valve. The air pressure is 2 bar. Leg tickler: gives a feeling of rat like movement. Approx. 10 inches long flexible pneumatic pipe dances/touches legs frequently. Air Blast: Provided through a fitting in right FRP Seat support handle. 2 bar air pressure felt at the face of viewer as per movie actions. Facial water spray: Special block fitted in the seat handle shoots a water mist with 2 bar pressure as per movie sequences. Floating Joints: Flexibility of seat movements ensured through Floating Joints. Absorbs any 'off-centering' or loss of 'parallel accuracy' present between Cylinder and seat. Suitable for high tensile stresses. Pneumatic Cylinders: 3 DOF Motion of Seats ensured by pneumatic Cylinder of size 100 mm diameter X 150 mm height. Life of Cylinder increased through use of Floating Joints. Seat movements: Pitch - Max. 150mm, Roll - Min. 17 degree, Heave - Min. 14 degree. Seats upholstery of durable Rexene Leatherette: Does not absorb moisture of rain fall and gets clean easily by a cotton cloth. Fiber Seat Base, PU Foam of 45 to 50 kg/cubic meter density, FRP shell with detachable cushioning and cover, grab handles |
| 31 | Supply, Installation, Testing & Commissioning of Computer Server Control System:In the Server system, the seat effects viz. Neck Blast, Back Vibrator, Leg Tickler, Air Blast, Facial water spray and Environmental effects also have individual access manually for maintenance purpose. Control & Projector computer with special heavy duty graphics card. 14 Generation Mother Board, RAM 8 GB, Computer system, Hard Disc - 1TB -1 No., 4 GB Graphic card - 2 Nos., Server system of Intel i7 processor with dual heavy duty graphic cards. Capability of 50 Mili second programming. |
| 32 | Supply, Installation, Testing & Commissioning of Air Compressor Station for 132 seat:Low noise Screw Type, vibration less, high efficiency, 30 KW each in compact housing with air receiving tank, controls plus oil and moisture separator, air filter, Capacity of the compressor to suit Design of the system, total load and movements of the motion chairs.A duct of size 1 feet x 1 feet shall be provided for exhaust from compressor.Working pressure 10 barFeatures:*Two-Stage Air Filtration Increased Life of Consumables- Ease Of Maintenance: Ease of Access to Components with Removable Panels- Neuron III Controller Advanced, Intelligent Controller for Safety and Reliability- Energy-Efficient Eco-Friendly Compressors- Robust Cooling System Reduced Air outlet and Oil Temperature- Excellent Oil Separation OSBIC 1 PPM Oil Carry Over- Optional Built-in VFD Compact and Reduced Footprint- Safety Compliant Package CE Certified- Highly Efficient Motor Energy Cost Saving |
| 33 | Supply, Installation, Testing & Commissioning of 3 D Glasses:High Grade Circular Polarised Glasses with 0.3 mm film thickness.There are two bending lines at the base of the left and right frames.It is a \\"3D eyewear\\" with the know-how gained from nearly 15 years' experience. Delivered in a folded individual package convenient for distribution at events, etc.Choice between black, red, blue, white, and black pattern. |
| 34 | Supply, Installation, Testing & Commissioning of Pneumatic line, power line and accessories for each simulator including PVC Pipes of dia 4, 6, 8 & 10 mm with connectors of different types |
| 35 | Supply and installation, Software license for lifetime use specially designed for motion simulators. Server system of Intel i7 processor with dual heavy duty graphic cards. Produces excellent 3D images combined with synchronized movements. Capability of 50 Mili second programming. |
| 36 | Supply, Installation, Testing & Commissioning of Effect PanelEffect Control Panel to control the Special effects in the theater viz.:- Wind effect- Snow effect- Bubble effect- Thunder effect- Rain effect- Fog effect- Aroma effect- Fire effect.It contains Effect PCB - 1, Relay Board, Adapter - 24 V etc. |
| 37 | Supply, Installation, Testing & Commissioning of Snow Machine:SPECIFICATION:Rated Voltage: US model: AC 100-120V, 50/60HZ 7.5A; EU model: AC 220-240V, 50/60Hz 4.0ARated Power: min 700WFluid Consumption: 140 ml/min (100% output)Fluid Tank Capacity: 5 Liters (1.32 gallon)Compatible Fluid: SL Snow Fluid, SL-A Snow Fluid, SL-N Fluid, SL-AN Snow Fluid, SL-H Snow Fluid, SL-C Snow Fluid, SL-UV UV Snow FluidAmbient Temp Range: 5°C - 40°C (41°F - 104°F)Control: Manual, DMX 512, Cable Remote (Standard)DMX Channels: 1 channelConnection: XLR 3-pin (DMX), XLR 4-Pin (Remote), IEC (Power)Included Accessories: Hanging Bracket, SC-2 Cable RemoteOptional Accessories: Floor Bracket, SC-2 Cable Remote |
| 38 | Supply, Installation, Testing & Commissioning of Fog Machine:Powerful 1500W fog machine. Quick warm-up time of 3-4 minutes. Sprays 20-30 feet of smoke, each spray lasts 40-60 seconds. Produces 25000 CFM of non-toxic fog.- 2 Sets of Controllers with a 5 feet long wired control and a wireless remote control (max use distance 160 feet). 2 sets of independent control systems for convenience during performances.- Automatic Smoke Spray, Overheat Protection: Press red button on the controller; when machine reaches set smoke temperature it automatically sprays smoke. Equipped with overheating protection system for safe use. DMX Enabled |
| 39 | Supply, Installation, Testing & Commissioning of Strobe Machine:Specially designed for Simulation Cinema - LED Flash light 900 W each, 50 Hz, AC 220 V, dimension - 480mm x 140mm x 220mmA typical commercial strobe light has a flash energy in the region of 10 to 150 joules, and discharge times as short as a few milliseconds.Accuracy: 0.1%Frequency Range: 1 Hz to 500 HzResolution: 0.1 HzLamp Life: 20,000 hoursBrightness: 30 lumens (peak) per module |
| 40 | Supply, Installation, Testing & Commissioning of Wind Machine:Wind effect requirement. Provides wind effects when used by itself; also can work with other effect machines such as fog, haze, snow and bubble to increase coverage.Extra foot stand design allows the wind to blow in two directions when placing on the floor. Optional hanging bracket offers other installation possibilities.Stand-alone, On-board DMX and optional wireless control satisfy different control requirements.SPECIFICATION:Input voltage: EU model: AC 220-240V, 50/60Hz 7.25AAir flow: min 1250 CFM (High), min 1000 CFM (Medium), min 700 CFM (Low)Control: Manual, Timer, DMX 512 |
| 41 | Supply, Installation, Testing & Commissioning of Water Reservoir- Stainless Steel Water effect reservoir with regulator, capacity - 15 liters, heavy duty thick tank bearing 4 bar pressure, dimension - 1 feet diameter x 1 feet height |
| 42 | Supply, Installation, Testing & Commissioning of Aroma Machine:AC 220 V, 50 Hz, dimension - 80 diameter x 200 mm height- Base Material: Metal.- Function Type: Electric.- Shape/Design: Cylindrical.- Power Source: Corded Electric.- OIL CAPACITY: 1000 ml. |
| 43 | Supply, Installation, Testing & Commissioning of Fire Machine:AC 220 V, 50 Hz, Power consumption - 200 watt, dimension - 500mm x 300mm x 500mmElectric Fire Flame Machine- Power: 200 Watt- Power Source: Electric.- Phase: Single Phase.- Voltage (Volt): 220 V.- Control Mode: Wireless/DMX.- Frequency: 50-60 Hz. |
| 44 | Supply, Installation, Testing & Commissioning of Rain Simulation Nozzles (complete set) with mist control feature, consists of AC coil, made up of brass nozzle, The Process of creating great looking rainfall is pretty straight forward. The volume of rain depends on flow rate through a rain head - higher flow rate means heavier rain. In order to produce heavy rainfall or smooth rainfall on all viewers in the theater, multiple rain heads / nozzles are designed to hang on the top of all pairs of motion seats. Also, the speed at which the rain falls is proportional to the height of rain heads - the higher the rain head, the faster the rain fall. |
| 45 | Chair Power Panel / Box: Chair power box to house PCBs, SMPS, Relay Board, Adapter, Switches etc., rectangular fabricated size 1'6\\" x 1'6\\" x 6\\". |
| 46 | Iron Fixtures: Iron Fixtures for all the effects Machines |
| 47 | C) SITC of 7D Theatre (Entec Zone) 2.Audio |
| 48 | Supply, Installation, Testing & Commissioning of a high-performance 15\\" installation loudspeaker, having a frequency response of 55 Hz–20 kHz (–3 dB) / 40 Hz–20 kHz (–10 dB). The loudspeaker shall deliver 600 W AES (2400 W peak) power handling with a maximum output of 128 dB continuous and 134 dB peak SPL. Coverage pattern shall be 90° (H) × 50° (V) or better, with a rotatable horn for flexible installation. The system shall support passive (1.2 kHz crossover) or bi-amp operation with 8 Ω nominal impedance. The LF section shall consist of a 15\\" driver with 550 W AES / 2200 W peak rating, 3\\" copper voice coil, ferrite magnet, optimized airflow, and an aluminum demodulation ring for reduced distortion. The HF section shall include a 1.4\\" exit compression driver rated at 50 W AES / 200 W peak with a 2.5\\" ferrite voice coil, mounted on a Contour waveguide to ensure uniform coverage. The cabinet shall be equipped with dual SpeakOn input/thru connectors for easy system integration. Approved Make: British Acoustics / Meyer Sound / Martin Audio / d&b audiotechnik. |
| 49 | Supply, installation, testing & commissioning of Loudspeaker mounting arrangement for Main FOH Speaker provides secure installation with adjustable brackets, supporting both horizontal and vertical setups for optimal sound coverage. Approved Make :- Netmas |
| 50 | Supply, installation, testing, and commissioning of a twin 18\\" passive subwoofer system with 32 Hz–190 Hz (–3 dB) / 37 Hz–200 kHz (–10 dB) frequency response. The system delivers 2400 W AES (9600 W peak) with 136 dB continuous / 142 dB peak SPL, omni-directional coverage, cardioid presets, 4 Ω nominal impedance, and active 80–120 Hz crossover. LF section: two 18\\" long-excursion drivers connected in parallel, 4\\" copper voice coil, ferrite magnet, 3-layer resistance coating, optimized airflow for minimal power compression, and aluminum demodulation ring. Features dual SpeakOn input/thru connectors. Approved Make: British acoustics/ Meyer sound/Martin audio/d&b audiotechnik. |
| 51 | Supply, installation, testing, and commissioning of 2 × 6\\" high-performance Front Fill speakers with 90 Hz–16 kHz (–3 dB) / 77 Hz–16 kHz (–10 dB) frequency response. The system delivers 300 W AES (1200 W peak), 120° horizontal × 60° vertical dispersion, 8 Ω nominal impedance, 2.1 kHz passive crossover (or bi-amplified), and dual SpeakOn input/thru connectors. LF section: two 6\\" drivers in parallel, 150 W AES (600 W peak) each, 1.3\\" copper voice coil, ferrite magnet, 3-layer resistance coating, optimized airflow, and aluminum demodulation ring. HF section: 0.75\\" exit compression driver with 1\\" ferrite voice coil and contour waveguide for consistent coverage. Approved Make: British acoustics/ Meyer sound/Martin audio/d&b audiotechnik. |
| 52 | Supply, installation, testing & commissioning of Loudspeaker mounting arrangement for Front fill Speaker provides secure installation with adjustable brackets, supporting both horizontal and vertical setups for optimal sound coverage. Approved Make :- Netmas |
| 53 | Supply, installation, testing, and commissioning of a 10\\" performance installation speaker with 68 Hz–20 kHz (–3 dB) / 55 Hz–20 kHz (–10 dB) frequency response. The system delivers 350 W AES (1400 W peak) with 123 dB continuous / 129 dB peak SPL, 90° horizontal × 50° vertical dispersion, user-rotatable horns, 1.8 kHz crossover or bi-amped operation, and 8 Ω nominal impedance. LF section: 10\\" driver, 325 W AES (1300 W peak), 2\\" copper voice coil, ferrite magnet, enhanced airflow, and aluminum demodulation ring. HF section: 0.75\\" exit compression driver, 30 W AES (120 W peak), 1\\" ferrite voice coil, with Contour Waveguide for consistent coverage. Features dual SpeakOn input/thru connectors. Approved Make: British acoustics/ Meyer sound/Martin audio/d&b audiotechnik. |
| 54 | Supply, installation, testing & commissioning of Loudspeaker mounting arrangement for Side fill Speaker provides secure installation with adjustable brackets, supporting both horizontal and vertical setups for optimal sound coverage. Approved Make :- Netmas |
| 55 | Supply, installation, testing, and commissioning of 2×1500 W Class H amplifier. Each amplifier has 2 output channels delivering 900 W per channel at 8 Ω, 1500 W at 4 Ω, 1800 W at 2.7 Ω and 2 Ω, with bridged outputs of 2700 W at 8 Ω and 3600 W at 4 Ω. The units feature 2 analogue inputs, 2 link outputs, and 2 power outputs. Connections are provided via XLR for signal input and link output, and Speak-On plus binding post connectors for channel outputs, ensuring reliable, high-power audio performance. Approved Make: British acoustics/ Meyer sound/Martin audio/d&b audiotechnik. |
| 56 | Supply, installation, testing, and commissioning of 2×2600 W Class H amplifier. Each unit provides 2 output channels rated at 1500 W per channel at 8 Ω, 2600 W at 4 Ω, 2800 W at 2.7 Ω, and 3000 W at 2 Ω, with bridged output capacity of 4500 W at 8 Ω and 6000 W at 4 Ω. The amplifier features 2 analogue inputs, 2 link outputs, and 2 power outputs. Connections are made via XLR connectors for signal input and link output, and Speak-On plus binding post connectors for channel outputs, delivering high-efficiency, professional-grade amplification. Approved Make: British acoustics/ Meyer sound/Martin audio/d&b audiotechnik. |
| 57 | Supply, Installation, Testing & Commissioning of a 32 Channel Dante Processor with the below specifications: (16) Analog Inputs, (16) Analog Outputs, Complete Dante Control Interface, 4 x GPIO Inputs, Custom GUI Software Builder, Anti-Feedback Algorithim over each input, 32-bit floating DSP Processing, Ducking, Complete Matrix Control, ADDA - Dante Conversion, RS 232 & RS 485 Control. Approved Make:- OSL/ British Acoustics/ D&B/ Martin Audio/ L-Acoustics. |
| 58 | Audio-Video Reciever (AVR) : Supply of 7.1 Surround sound Processor with 11.4 Ch. 140W 8K AV Receiver with HEOS® Built-in 140W per channel (8 ohms, 20 Hz – 20 kHz, 0.05% THD), Speaker Impedance 4 Ω –16Ω, Class AB Amplification, Dolby Atmos, DTS:X, Auro-3D, IMAX Enhanced, Dolby TrueHD, DTS-HD Master Audio Multi-channel PCM High-resolution audio formats: ALAC, FLAC, WAV, AIFF (up to 24-bit/192kHz), HDCP2.3 support, 8K/60Hz and 4K/120Hz pass-through via HDMI 2.1, HDR Support : Dolby Vision, HDR10+, HDR10, HLG 7 HDMI Inputs, 3 HDMI Outputs (one with eARC), 4K/120Hz, 8K/60Hz video passthrough, Audyssey MultEQ XT32, AL32 Processing Multichannel, Dirac Live Ready, Apple AirPlay 2, Bluetooth, and Wi-Fi streaming, HEOS built-in. Make : Denon / Marantz / Pioneer |
| 59 | C) SITC of 7D Theatre (Entec Zone) 3.Projection and Control Systems |
| 60 | Supply, Installation, Testing and Commissioning of 3D Enabled Projector minimum 1-chip DLP, Min output resolution WUXGA, brightness 25,000 - 30,000 lumens, Laser Phospor Digital projector, Contrast Ratio: min 1800 : 1, illumintion minimum 20000 hours, Omni directional, Motorized horizontal and vertical lens offset, Inputs: 12G SDI, HDMI 2.0, DP, Analog Controls: RS232 in/out, RS422 in, Ethernet (10/100), oise should not be more than 60dB, typical power consumption should not bemore than 1550 watts, should be complete with mounts and lens (Make: Sony/ NEC / Christie) |
| 61 | Supply, installation, testing and commissioning of 3D Enabled Media Server - Intel Core i7/ i9 Series Processor or above with following minimum specifications: 32 GB RAM system memory, Minimum 1TB SSD storage, Dedicated 8 GB Graphic card (NVIDIA/ AMD), CD Rom, DVD ROM, USB 3.0 interface with 4 USB ports, Wireless key board, Wireless mouse with licensed loaded Window 8/10, LAN, Audio Jack, VGA port, Line in - Line out and Video Output DVI,HDMI etc. (Make: Dell/ HP/ Asus/ or Equivalent) |
| 62 | Supply, installation, testing and commissioning of 24 inches Flat LCD Display Monitors with Optimal Resolution of 1920 x 1080 at 60 Hz having Brightness 250 cd/m² (typical). CONNECTIVITY 1 Digital Visual Interface connectors (DVI-D) with HDCP 1 Video Graphics Array (VGA) 1 USB 2.0 upstream port 2 USB 2.0 downstream ports DC power connector for Soundbar (Make: Dell/ HP/ Asus/ or Equivalent) |
| 63 | Supply, installation, testing and commissioning of Media Production Software for 3D Video Display Management. (Make: Dataton/ Medialon/ Resolume/ Equivalent) |
| 64 | Supply, installation, testing and commissioning of Video Transmitter and Receiver Set Max Data Rate 10.2 Gbps, Low power consumption, compliances CE, c-UL UL, CE**, C-tick, FCC Class A**, ICES (Make: Kramer/ Extron/ HoC/ Linetek) |
| 65 | C) SITC of 7D Theatre (Entec Zone) 3.Lighting, Electrical and Power Backup |
| 66 | Supply, installation, testing and commissioning of 40 KVA, true on-line UPS 3 Ph double Conversion with all safeties and protection and suitable capacity sealed maintenance free 12 V batteries, with a 30 mins backup time on full load with MS open MS Battery rack and Nyvin cable. (Make: Eaton/ BPE/ Emerson / Equivalent) |
| 67 | Supply, installation, testing and commissioning of WW LED Downlighters, recessed in Ceiling, minimum 20W, complete with Power Supply (Make: Phillips/ Compton/ Equivalent) |
| 68 | Supply, installation, testing and commissioning of WW LED Strip of minimum 11W/m, complete with Power Supply and aluminium channel for fixing (Make: Phillips/ Compton/ Equivalent) |
| 69 | Supply, installation, testing and commissioning of CAT 6/5e Shielded Twisted Pair cable for signal & data transmission. 24 AWG twisted pair conductors inside an overall braid and foil shield. Shielded Twisted Pair cable should provides added protection from outside interference and ensures high quality signal transmission (Make: Beldon/ Dlink/ Extron/ Kramer) |
| 70 | Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 3 core 1.5 sq. mm. copper conductor complete erected with glands & lugs, on wall/ trusses/ pole or laid in provided trench/ pipe as per specification no. CB-LT/CU |
| 71 | Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 3 core 2.5 sq. mm. copper conductor complete erected with glands & lugs, on wall/ trusses/ pole or laid in provided trench/ pipe as per specification no. CB-LT/CU |
| 72 | Supply, installation, testing and commissioning of HDMI to HDMI cable supports signals up to 4K x 2K Video and more color spare, 15.2 Gbps DTR, 10MΩ minimum Insulation resistance, -25 to 80 degree Celsius Working Temperatre (Make: Kramer/ Extron/ HoC/ Stricker/Equivalent) |
| 73 | Supply, Installation, Testing and Commissioning of Speaker Cable – 2.5 Sqmm (80/0.20mm) x 2 core cable ATC copper conductor PVC insulated, core twisted, outer jacketed with Vasiform Type PVC Sheath (Make:- Draka/Belden/Netmas) |
| 74 | Supply, Installation, Testing and Commissioning of all Electrical accessories, PVC Conduit Pipes, Cable Trays as required for successful running of Electrical and Signal Cables as per design. (Brands: Reputed Indian make) |
| 75 | Supply, Installation, Testing and Commissioning of Electrical Panels as required for successful Electrical Supply as per design. (Brands: Reputed Indian make) |
| 76 | Supply installation and fixing Equipment Rack - 19 \\" standard 36 U Rack with all required accessories. Earthing community kit, mounting bracket, cable manager, support angle, equipment shelf, mounting hardware, fan housing units etc, Ventilated top and bottom covers with attractive styling. It has Removable side panels with slam latches for easy access. (Make: Natmas/ APW/ Netrack) |
| 77 | C) SITC of 7D Theatre (Entec Zone) 4. 3D Video Content Creation |
| 78 | Script writing: includes movement, actions, expression and dialogue of the characters, drama etc for about 15-20 mins. |
| 79 | Script writing: includes movement, actions, expression and dialogue of the characters, drama etc for about 15-20 mins. |
| 80 | Audio Visual 3D Content Part-1: includes visual Storyboard, Storytelling, 2D 3D animation, Anamorphhic Graphics, Art Works, Archival Imagery, Video-timeline, SFx, VFx |
| 81 | Audio Visual Content Part-2: includes visual Storyboard, Storytelling, 2D 3D animation, Ananmorphic Graphics, Art Works, Archival Imagery, Video-timeline, SFx, VFx |
| 82 | Music composition and direction Part-1: conceptualization and designing of music track for VO, musician to play instruments. background sound. archival sound mixing and design. songs, etc. |
| 83 | Music composition and direction Part-2: conceptualization and designing of music track for VO, musician to play instruments. background sound. archival sound mixing and design. songs, etc. |
| 84 | Art Work: includes design and development of pictures, digital illustration, sketch, characters, etc for the show. The Artwork should be created by professional Artist and Illustrator. |
| 85 | Voiceovers Part-1: The narrator voiceover will be as per proposed artist. The show narration will be in Hindi & English language. All other character voiceover will be done by professional artists only. |
| 86 | Voiceovers Part-2: The narrator voiceover will be as per proposed artist. The show narration will be in Hindi & English language. All other character voiceover will be done by professional artists only. |
| 87 | 7D Seats and Effects Programming: Programming of 7D Seats movement and 7D effects according to script, characters, events, mood, drama etc and creating timeline sync with the audio video storyline. |
| 88 | On Site Audio Design and Distribution: Distribution of layers of music track and VO as per Audio distribution system. |
| 89 | D) SITC of 360 Experience (Entec Zone) 1.Audio |
| 90 | Supply, Installation, Testing & Commissioning of a high-performance 15\\" installation loudspeaker, having a frequency response of 55 Hz–20 kHz (–3 dB) / 40 Hz–20 kHz (–10 dB). The loudspeaker shall deliver 600 W AES (2400 W peak) power handling with a maximum output of 128 dB continuous and 134 dB peak SPL. Coverage pattern shall be 90° (H) × 50° (V) or better, with a rotatable horn for flexible installation. The system shall support passive (1.2 kHz crossover) or bi-amp operation with 8 Ω nominal impedance. The LF section shall consist of a 15\\" driver with 550 W AES / 2200 W peak rating, 3\\" copper voice coil, ferrite magnet, optimized airflow, and an aluminum demodulation ring for reduced distortion. The HF section shall include a 1.4\\" exit compression driver rated at 50 W AES / 200 W peak with a 2.5\\" ferrite voice coil, mounted on a Contour waveguide to ensure uniform coverage. The cabinet shall be equipped with dual SpeakOn input/thru connectors for easy system integration. Approved Make: British Acoustics / Meyer Sound / Martin Audio / d&b audiotechnik. |
| 91 | Supply, installation, testing & commissioning of Loudspeaker mounting arrangement for Main FOH Speaker provides secure installation with adjustable brackets, supporting both horizontal and vertical setups for optimal sound coverage. Approved Make :- Netmas |
| 92 | Supply, installation, testing, and commissioning of an 18\\" passive subwoofer with 3 Hz–800 Hz (–3 dB) / 41 Hz–200 kHz (–10 dB) frequency response. The system delivers 1200 W AES (4800 W peak) with 129 dB continuous / 135 dB peak SPL, omni-directional coverage, cardioid presets, 8 Ω nominal impedance, and active 80–120 Hz crossover. LF section: 18\\" long-excursion driver, 4\\" copper voice coil, ferrite magnet, 3-layer resistance coating, optimized airflow for minimal power compression, and aluminum demodulation ring. Features dual SpeakOn input/thru connectors. Approved Make: British acoustics/ Meyer sound/Martin audio/d&b audiotechnik. |
| 93 | Supply, installation, testing, and commissioning of an 8\\" performance installation speaker with 72 Hz–20 kHz (–3 dB) / 60 Hz–20 kHz (–10 dB) frequency response. The system delivers 250 W AES (1000 W peak) with 120 dB continuous / 126 dB peak SPL, 90° horizontal × 50° vertical dispersion, user-rotatable horns, 1.8 kHz crossover or bi-amped operation, and 8 Ω nominal impedance. LF section: 8\\" driver, 220 W AES (880 W peak), 1.3\\" copper voice coil, ferrite magnet, enhanced airflow, and aluminum demodulation ring. HF section: 0.75\\" exit compression driver, 30 W AES (120 W peak), 1\\" ferrite voice coil, with contour waveguide for consistent coverage. Features dual SpeakOn input/thru connectors. Approved Make: British acoustics/ Meyer sound/Martin audio/d&b audiotechnik. |
| 94 | Supply, installation, testing & commissioning of Loudspeaker mounting arrangement for Side fill Speaker provides secure installation with adjustable brackets, supporting both horizontal and vertical setups for optimal sound coverage. Approved Make :- Netmas |
| 95 | Supply, installation, testing, and commissioning of 2×1500 W Class H amplifier. Each amplifier has 2 output channels delivering 900 W per channel at 8 Ω, 1500 W at 4 Ω, 1800 W at 2.7 Ω and 2 Ω, with bridged outputs of 2700 W at 8 Ω and 3600 W at 4 Ω. The units feature 2 analogue inputs, 2 link outputs, and 2 power outputs. Connections are provided via XLR for signal input and link output, and Speak-On plus binding post connectors for channel outputs, ensuring reliable, high-power audio performance. Approved Make: British acoustics/ Meyer sound/Martin audio/d&b audiotechnik. |
| 96 | Supply, installation, testing, and commissioning of 2×2600 W Class H amplifier. Each unit provides 2 output channels rated at 1500 W per channel at 8 Ω, 2600 W at 4 Ω, 2800 W at 2.7 Ω, and 3000 W at 2 Ω, with bridged output capacity of 4500 W at 8 Ω and 6000 W at 4 Ω. The amplifier features 2 analogue inputs, 2 link outputs, and 2 power outputs. Connections are made via XLR connectors for signal input and link output, and Speak-On plus binding post connectors for channel outputs, delivering high-efficiency, professional-grade amplification. Approved Make: British acoustics/ Meyer sound/Martin audio/d&b audiotechnik. |
| 97 | Supply, Installation, Testing & Commissioning of 4-IN 8-OUT Loudspeaker Processor, Matrix & Controller with 4 analogue inputs, 8 analogue outputs, and 96 kHz DSP on all channels. Audio performance: impedance >10 kΩ, CMRR >60 dB, min. load 600 Ω, frequency response 10 Hz–40 kHz, dynamic range >116 dB, THD <0.004%. Crossovers: Linkwitz-Riley, Bessel, Butterworth (12/24/36/48 dB/oct). EQ: 6 filters per input/output (parametric, low/high-shelf, all-pass), plus 2 dynamic EQ filters per input with adjustable threshold, ratio, attack/release. Dynamics include visual compressor, automatic gate compensation, and output limiters. Control & monitoring via 4 input/8 output meters, LED display, DSP control panel. Connectors: 4 XLR inputs, 8 XLR outputs, RS-485 (ETH/Euroblock), USB Type-B. Power: 85–230 VAC, 50/60 Hz; nominal consumption 1 A @ 240 V, 2 A @ 120 V. Approved Make: British acoustics/ Meyer sound/Martin/d&b audiotechnik. |
| 98 | D) SITC of 360 Experience (Entec Zone) Projection and Control Systems |
| 99 | Supply, Installation, Testing and Commissioning of 1-chip DLP LASER Phosphor Multimedia Projection system having, min 9600 Lumens 20000 hours lamp life, 1920 x 1200 WUXGA Native Resolution, min offset vertical 110%, horizontal 50%, Inbuilt blending and warping with automatic caliberation software, 3000000:1 or better :1 Contrast Ratio, inputs: HDBaseT, HDMI2.0, DVI-D, Active 3D, Motorised zoom and focus, alongwith suitable lens & projector mountin bracket etc. complete with installation as per the site requirement. Projector body color should be mat black. Make: Christie/sony/ nec |
| 100 | Supply, installation, testing and commissioning of Media Server - Intel Core i7/i9 Series Processor or above with following minimum specifications: 32 GB RAM system memory, Minimum 1TB SSD storage, Dedicated 8 GB Graphic card (NVIDIA/AMD), CD Rom, DVD ROM, USB 3.0 interface with 4 USB ports, Wireless key board, Wireless mouse with licensed loaded Window 8/10, LAN, Audio Jack, VGA port, Line in - Line out and Video Output DVI,HDMI etc. (Make: Dell/ HP/ Asus/ or Equivalent) |
| 101 | Supply, installation, testing and commissioning of 24 inches Flat LCD Display Monitors with Optimal Resolution of 1920 x 1080 at 60 Hz having Brightness 250 cd/m² (typical). CONNECTIVITY 1 Digital Visual Interface connectors (DVI-D) with HDCP 1 Video Graphics Array (VGA) 1 USB 2.0 upstream port 2 USB 2.0 downstream ports DC power connector for Soundbar (Make: Dell/ HP/ Asus/ or Equivalent) |
| 102 | Supply, installation, testing and commissioning of Media Production Software for Video Display Management. (Make: Dataton/ Medialon/ Resolume/ Equivalent) |
| 103 | Supply, installation, testing & commissioning of Variablespeed and bi-directional DMX/Relay controlled turntable Diameter of the turntable is min 9m,Approx weight is 10 T ons,Drive is 25KW variable frequency drive,Voltage 430 V-AC-3 Phase-50 Hz, Max Speed - 1 RPMAll mechanical components are designed andmanufactured to withstand all static and dynamic loadsincluding safety factor as suggested by the pertinent ENRegulations. All public safety and structural safety normsand standards shall be applicable. Includes Electrical and Signal Control Panel of the Motors. |
| 104 | Supply, installation, testing and commissioning of Video Transmitter and Receiver Set Max Data Rate 10.2 Gbps, Low power consumption, compliances CE, c-UL UL, CE**, C-tick, FCC Class A**, ICES (Make: Kramer/ Extron/ HoC/ Linetek) |
| 105 | Supply, installation, testing and commissioning of Theatre Seats, with Armrest and Cushioned back and seat. (Make: Custom) |
| 106 | D) SITC of 360 Experience (Entec Zone) Lighting, Electrical and Power Backup |
| 107 | Supply, installation, testing and commissioning of 40 KVA, true on-line UPS 3 Ph double Conversion with all safeties and protection and suitable capacity sealed maintenance free 12 V batteries, with a 30 mins backup time on full load with MS open MS Battery rack and Nyvin cable. (Make: Eaton/ BPE/ Emerson / Equivalent) |
| 108 | Supply, installation, testing and commissioning of WW LED Downlighters, recessed in Ceiling, minimum 20W, complete with Power Supply (Make: Phillips/ Compton/ Equivalent) |
| 109 | Supply, installation, testing and commissioning of WW LED Strip of minimum 11W/m, complete with Power Supply and aluminium channel for fixing (Make: Phillips/ Compton/ Equivalent) |
| 110 | Supply, installation, testing and commissioning of CAT 6/5e Shielded Twisted Pair cable for signal & data transmission. 24 AWG twisted pair conductors inside an overall braid and foil shield. Shielded Twisted Pair cable should provides added protection from outside interference and ensures high quality signal transmission (Make: Beldon/ Dlink/ Extron/ Kramer) |
| 111 | Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 3 core 1.5 sq. mm. copper conductor complete erected with glands & lugs, on wall/ trusses/ pole or laid in provided trench/ pipe as per specification no. CB-LT/CU |
| 112 | Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 3 core 2.5 sq. mm. copper conductor complete erected with glands & lugs, on wall/ trusses/ pole or laid in provided trench/ pipe as per specification no. CB-LT/CU |
| 113 | Supply, installation, testing and commissioning of HDMI to HDMI cable supports signals up to 2K x 2K Video and more color spare, 10.2 Gbps DTR, -25 to 80 degree Celsius Working Temperatre (Make: Kramer/ Extron/ HoC/ Stricker/Equivalent) |
| 114 | Supply, Installation, Testing and Commissioning of Speaker Cable – 2.5 Sqmm (80/0.20mm) x 2 core cable ATC copper conductor PVC insulated, core twisted, outer jacketed with Vasiform Type PVC Sheath (Make:- Draka/Belden/Netmas) |
| 115 | Supply, Installation, Testing and Commissioning of all Electrical accessories, PVC Conduit Pipes, Cable Trays as required for successful running of Electrical and Signal Cables as per design. (Brands: Reputed Indian make) |
| 116 | Supply, Installation, Testing and Commissioning of Electrical Panels as required for successful Electrical Supply as per design. (Brands: Reputed Indian make) |
| 117 | Supply installation and fixing Equipment Rack - 19 \\" standard 36 U Rack with all required accessories. Earthing community kit, mounting bracket, cable manager, support angle, equipment shelf, mounting hardware, fan housing units etc, Ventilated top and bottom covers with attractive styling. It has Removable side panels with slam latches for easy access. (Make: Natmas/ APW/ Netrack) |
| 118 | D) SITC of 360 Experience (Entec Zone) 3D Video Content Creation |
| 119 | Script writing: includes movement, actions, expression and dialogue of the characters, drama etc for about 15-20 mins. |
| 120 | Audio Visual 360 Experience Content Part-1: includes visual Storyboard, Storytelling, 2D 3D animation, Anamorphhic Graphics, Art Works, Archival Imagery, Video-timeline, SFx, VFx |
| 121 | Audio Visual Content Part-2: includes visual Storyboard, Storytelling, 2D 3D animation, Ananmorphic Graphics, Art Works, Archival Imagery, Video-timeline, SFx, VFx |
| 122 | Music composition and direction Part-1: conceptualization and designing of music track for VO, musician to play instruments. background sound. archival sound mixing and design. songs, etc. |
| 123 | Music composition and direction Part-2: conceptualization and designing of music track for VO, musician to play instruments. background sound. archival sound mixing and design. songs, etc. |
| 124 | Art Work: includes design and development of pictures, digital illustration, sketch, characters, etc for the show. The Artwork should be created by professional Artist and Illustrator. |
| 125 | Voiceovers Part-1: The narrator voiceover will be as per proposed artist. The show narration will be in Hindi & English language. All other character voiceover will be done by professional artists only. |
| 126 | Voiceovers Part-2: The narrator voiceover will be as per proposed artist. The show narration will be in Hindi & English language. All other character voiceover will be done by professional artists only. |
| 127 | Edge Blending and Projector Mapping: Alignment of multiple projectors for edge blending using cutting edge technology and as per show requirement. |
| 128 | On Site Audio Design and Distribution: Distribution of layers of music track and VO as per Audio distribution system. |
| 129 | E) Plumbing work |
| 130 | SANITARY FIXTURESProviding and Fixing vitreous china floor mounted (European Type) water closet with 'P\\" or \\"S\\" trap, C.P. bolts, nuts with solid plastic seat & lid, C.P brass hinged rubber buffers with dual flush 3/6 litre capacity cistern with flush pipe, clamp and rubber adapter joint C.P.brass screws and washers complete including cutting and making good the walls and floors wherever required etc. complete in all respect as per direction of Engineer-in-charge.(Make- Euronics: Model No.C001-WC), (Make- Jaquar: Model No.LYS-WHT-38751S250UFSM) & (Make- Hindware: Cat. No.: 92597) |
| 131 | Providing and Fixing White vitreous china Under counter wash basin with C.I. brackets painted white, 15 mm CP Brass auto closing pillar cock, 32mm dia. C.P. waste, C.P chain and rubber plug, C.P. connecting pipe to wall and C.P wall flange and rubber adapter for waste connection complete including cutting and making good the walls wherever required etc. complete in all respect as per direction of Engineer-in-charge.(Make- WB Euronics: Model No.C016-WB) (MakeSelf Closing Tab- Euronics: Model No.EPT04B-CP) |
| 132 | Providing and fixing vitreous china urinal with electrical/ battery operated concealed automatic flushing system CP Brass body with C.I. hangers, 15mm dia inlet to built in spreaders with inbuilt waste with C.P flange for urinal complete including cutting and making good the walls and floors wherever required etc. complete in all respect as per direction of Engineer-in-charge. (Make- Euronics: Model No.C020-UR,Sensor Model-EU44BE) |
| 133 | Providing and fixing 15mm nominal bore C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms.(Make- Euronics: Model No-RIV-1010R) |
| 134 | Providing and Fixing C.P. brass towel ring \\"Round\\" fixed to PVC cleats with C.P. brass screws including cutting and making good the walls wherever required etc. complete in all respect as per direction of Engineer-in-charge.(Make- Euronics: Model No-ACC03) |
| 135 | Providing and fixing SS liquid soap dispenser with push lever assembly with soap refill fixed in wall with Screws complete in all respect as per direction of the engineer-in-charge.(Make- Euronics: Model No-ES05) |
| 136 | Providing and fixing CP Brass Bottle Trap of approved quality & make etc. complete in all respect as per direction of Engineer-in-charge.32 mm dia (Make- Euronics: Model No-EBT32-CP) |
| 137 | Providing and fixing C.P. brass angle valve for basin and geyser points of approved quality conforming to IS:8931 15mm nominal bore(Make- Euronics: Model No-RIV-1003R) |
| 138 | Providing and fixing C.P. Brass Toilet paper holder, including cutting and making good the walls wherever required etc. complete in all respect as per direction of the Engineer-in-charge.(Make- Euronics: Model No-RIV-ACC08) |
| 139 | Providing and fixing Health faucet with 1 metre long Flexible Tube and CP wall hook with PVC & SS Screws wherever required complete as directed by the Engineer-in-charge.(Make- Euronics: Model No-EHF01) |
| 140 | Providing and Fixing Handicapped set including white vitreous china floor mounted European type water closet including exposed cistern , Flat Back wash basin with one pair of mounting brackets , complete with fittings, seat cover, two no hinged rail 76 cms and five nos of grab bar 60 cms including 15 mm dia autoclosing pillar cock for Handicaped Toilet complete in all respest as per direction of the engineer-in-charge. |
| 141 | Providing and Fixing CP auto push cock with CP Wall flange for drinking water purpose complete as per direction of the engineer-in-charge.(Make- Euronics: Model No-EPT05 ) |
| 142 | Providing & fixing C.P. brass single lever basin mixer without pop up waste system with 450mm long Copper Pipes with nuts and rubber washer including cutting and making good the walls wherever required.(Make- Euronics: Model No-RIV-1021R) |
| 143 | Providing and Fixing C.P cast brass double coat hook fixed to PVC cleats with C.P. brass screws including cutting and making good the walls wherever required.(Make- Euronics: Model No-RIV-EC02) |
| 144 | Providing and Fixing CP Soap dish with PVC plugs with screws and making good the walls wherever required (Make- Euronics: Model No-ACC01) |
| 145 | Providing and Fixing 600 mm long Hand rail (Grab bar) for Handicap Toilets with Stainless Steel Screws on wooden cleats complete as per instructions of the engineer-in-charge (Make- Euronics: Model No-EGR 01(600MM) |
| 146 | Providing and Fixing C.P. Sliding Rail with stainless steel screws on plastic cleants complete in all respects as per the Engineer- In -charge.(Make- Euronics: Model No-EGR 01(600MM) |
| 147 | Providing and Fixing Floor drain by fixing G.I. Reducing elbow of 100 x 50 mm in cement concrete 1:2:4 at all levels (excluding cost of grating) for connection to floor traps in sunken portions, complete as per required slope as per drawings and as per approval of the engineer-in-charge. |
| 148 | Providing and fixing G.I. inlet fitting with one or more inlets fabricated from 100mm dia G.I. pipe and welded G.I. sockets and fixed to C.I. trap by lead joint as per standard detail. |
| 149 | Providing and fixing cast brass Floor Clean out with suitable insert keys for opening, male threaded joint with G.I. socket lead caulked to soil pipe / waste pipe of C.I. and C.I.(LA) pipe as required complete as shown in the Sketch.100mm dia |
| 150 | Providing and fixing 125mm dia round bronze C.P frame and grating with connecting stainless steel screws, complete as per requirements. |
| 151 | 300 mm dia |
| 152 | Constructing brick masonry catch basin with 75 class designation bricks in cement mortar 1:5 (1 cement: 5 coarse sand), 150mm thick foundation concrete 1:5:10 (1 cement: 5 coarse sand: 10 graded stone aggregate 40mm nominal size) inside and outside plaster in cement mortar 1:3 (1 cement: 3 coarse sand). inside finished with floating coat of neat cement, making haunches and channel in cement concrete 1:2:4 (1 cement: 2 coarse sand: 4 graded stone aggregate 20mm nominal size) neatly finished, complete as per standard design including excavation, refilling and disposal of surplus earth.Size 450X450X450mm inside with precast S.F.R.C. grating of approved design and sample fixed in Plain Cement Concrete 1:2:4 mix (1 cement: 2 coarse sand: 4 graded stone aggregate 20mm nominal size) including centering, shuttering all complete as per site conditions. |
| 153 | Size 600X600X600mm inside with precast S.F.R.C. grating of approved design and sample fixed in Plain Cement Concrete 1:2:4 mix (1 cement: 2 coarse sand: 4 graded stone aggregate 20mm nominal size) including centering, shuttering all complete as per site conditions. |
| 154 | Size 750x750x750mm inside with precast S.F.R.C. grating rectangular of approved design and sample fixed in Plain Cement Concrete 1:2:4 mix (1 cement: 2 coarse sand: 4 graded stone aggregate 20mm nominal size) including centering, shuttering all complete as per site conditions. |
| 155 | Size 900x900x900mm inside with precast S.F.R.C. grating rectangular of approved design and sample fixed in Plain Cement Concrete 1:2:4 mix (1 cement: 2 coarse sand: 4 graded stone aggregate 20mm nominal size) including centering, shuttering all complete as per site conditions. |
| 156 | Extra for depth of Catchbasin exceeding 45cm. |
| 157 | Extra for depth of Catchbasin exceeding 60cm. |
| 158 | Extra for depth of Catchbasin exceeding 75cm. |
| 159 | Extra for depth of Catchbasin exceeding 90cm. |
| 160 | F) Firefighting work PORTABLE FIRE EXTINGUISHERS Providing and fixing \\"ABC\\" stored pressure type Dry Chemical Powder (Mono-Ammonium Phosphate ) fire extinguisher with fixing hangers, hose, brackets, screws to required size etc., complete as per IS: 15683:20066 Kg. Capacity Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 26, 2026
11:30 IST
Tender Published
Tender notice published.
Completed
Oct 31, 2026
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Upcoming · 3 daysOct 31, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 3 daysNov 02, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 5 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender