Tender For Improvement Of Fiac And Extended Fiac, Jagannath Prasad
Tender Value
5.85 Lakhs
Estimated cost
Bid Submission
02 Nov 2026
6 days left
EMD
5859
Bank guarantee accepted
Document Fee
4000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Ganjam → Odisha
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Improvement Of Fiac And Extended Fiac, Jagannath Prasad
BOQ
| Sl. No. | Item Description |
| 1 | Clearing grass and removal of rubbish up to a distance of 50m outside the periphery of the area |
| 2 | Excavation of foundation in hard including levelling and dressing the bed and sides depositing muck within initial lead and lift. |
| 3 | Filling foundation and plinth with sand well watered and rammed including cost and conveyance of materials. |
| 4 | Cement concrete (1:4:8) using 4cm CBHG metal including cost,conveyance and royality of materials curing etc. complete |
| 5 | Cement concrete (1:2:4) using 12mm CBHG metal including cost,conveyance and royality of materials curing etc. complete |
| 6 | Brick work with Flyash Brick having crushing strength not less than 75 Kg/cm2 with dimensional tolerance ± 8 percent in cement mortar (1:6) in foundation and plinth |
| 7 | Brick work with Flyash Brick having crushing strength not less than 75 Kg/cm2 with dimensional tolerance ± 8 percent in cement mortar (1:6) in superstructure in ground floor |
| 8 | 4 cm thick grading concrete (1:2:4) on roof slab with 12mm & downgrade size black hard granite chips for Old work per 1 sqm. In First Floor |
| 9 | Removing old cement plaster from walls including raking out joints 12 mm deep and removing the debris within 50 mt lead |
| 10 | 12 mm (½”) thick cement plaster (1:6) finished smooth to outside smooth surface of brick walls after raking out the jointincluding watering and curing with cost, conveyance, royaltiesand excluding GST of all materials with all labour and T&Prequired for the work etc. a) Ground Floor |
| 11 | b) First Floor |
| 12 | c) Second Floor |
| 13 | 16 mm (5/8”) thick cement plaster (1:6) finished smooth to inside rough surface of 9”/10” thick brick walls after rakingout the joints including watering and curing with cost withcost, conveyance, royalties and excluding GST of all materialswith all labour, T&P required for the work etc.a) Ground Floor |
| 14 | b) First Floor |
| 15 | c) Second Floor |
| 16 | Finishing wall surface with Cement wall putty (Water based) of approved make and finished smooth and even surface to receive painting including cost of scaffolding staging charges with cost of all materials complete. |
| 17 | Priming one coat to wall surface with water bound cement primer including cost, conveyance,excluding GST of all materials, labour and T&P etc. complete a) Ground Floor |
| 18 | b) First Floor |
| 19 | c) Second Floor |
| 20 | Wall painting -2 coats with plastic emulsion paint of approved shade on new work to give an even shade including cost of paint. a) Ground Floor |
| 21 | b) First Floor |
| 22 | c) Second Floor |
| 23 | Finishing exterior walls with weather coat of approved shade two coats on new work to give an even shade including cost of paint. a) Ground Floor |
| 24 | b) First Floor |
| 25 | c) Second Floor |
| 26 | Red Oxide Priming one coat with Red oxide primer of approvedquality etc. complete as per direction of Engg-in-Charge .a) Ground Floor |
| 27 | b) First Floor |
| 28 | c) Second Floor |
| 29 | Enamel painting 2-Coats over iron works with enamel paint of approved quality including cost of enamel paint . A) Ground Floor |
| 30 | b) First Floor |
| 31 | c) Second Floor |
| 32 | Dismantling and removing old tiled flooring including removing the base coarse and stacking the useful materials for reuse and removing the debris within 50 m lead per 1 sqm |
| 33 | Supplying, fitting & fixing of Vitrified Industrial tiles in floors of size (30 x 30) cm of approved make confirming to IS: 4457 laid on 20mm thick CM (1:4) and filling joints with white cement of aproved quality including cost of all materials, labour T & P etc required for the work in GF |
| 34 | Providing, fitting, & Fixing of Central Table for Dias & hall with one shelf made up with 19 mm thick phenol bounded BWR grade block board and subsequently finished with 1 mm thick BWR grade decorative laminates (Outer) & 0.75 mm thick (Inner) laminates of approved shade on required side over wooden frame fixed with raw plug including drilling of necessary holes fixed by synthetic adhesive and headless pins with all accessories etc. complete as per direction of Engineer in charge. |
| 35 | Letter writing on front wall of the building for signboard purpose on a base of weather coat paint including all cost of paints materials & labour charges etc |
| 36 | Recessed wirring to light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor of ISI marked Make- Finolex/Anchor/Polycab/HAVELLS/RR KABLE/KEI with 20 mm dia HMS FRLS PVC conduit ISI marked Make-AKG/BEC/Precision/Norpak/Anchor/Kinjal 6A modular type ( flame retradant type) switch ISI marked Make-Schneider (Zencelo)/legrand( Myrius) /Panasonic (vision) and ceiling rose ISI marked of modular type G.I box with metallic cover plate (both side) ( flame retradant type) Make-Schneider(Zencelo)/legrand( Myrius) /Panasonic (vision) of suitable size, modular box with 1.5 sq. Mm FRLS PVC insulated single core multistandard copper conductor as earth wire including all accessories and connection as per direction of Engineer -in -Charge. Group-A, short point |
| 37 | Group-B, medium point |
| 38 | Recessed wiring to 5A /6Amp Modular socket outlet with 2 X 1.5sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked in recess 20mm dia non metallic PVC flexible conduit with Modular Switch phenolic laminated sheet suitable size ISI marked MS box and earthing point with 1 X1.5sq.mm FR PVC insulated single core multistrand copper conductor for loop earthing etc. as required (Make of wire -Finolex/ L&T/ Anchor/ Havells/V-Guard/Great White/HPL) Supply & Fixing of 5/6 amp, 3-pin Modular socket with 6 Amp Switch on existing board. |
| 39 | Separate Modular Plug point with switch |
| 40 | Wiring of circuit/Recessed Sub-main wiring alongwith earth wire with the following sizes of PVC insulated single core multistrand copper conductor, ISI marked conforming to IS-694/1990 in 20mm dia non metallic heavy duty flexible conduit, 1.6 mm in recessed PVC conduit as required (Make of wire- Finolex/L&T/Anchor/Havells/V-Guard/Great White/Mescab/HPL)2 X 1.5 sq.mm + 1 x 1.5 sq.mm |
| 41 | 2 X 2.5 sq.mm + 1 x 1.5 sq.mm |
| 42 | 2 x 4.0 sq.mm. + 1 x 1.5 sq.mm. |
| 43 | 2 x 6.0 sq.mm. + 1 x 2.5 sq.mm. |
| 44 | Supplying and fixing of following sizes of medium class PVC FRLS conduit ISI marked along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required as per direction of Engg.-in-Charge .Make-AKG/ BEC/ Precision/ Norpak 20 mm |
| 45 | S/F of 32 Amp DP Switch (Make-Cona/Anchor) |
| 46 | Supply and Fixing of 25 watt LED Street Light fitting. (Make- Havells/ Phillips/ Bajaj/ Crompton) with all complete |
| 47 | Supplying all labour T & P & materials & cutting grooves in pucca floors & walls veritically & horizontally to the required depth & width for fixing GI/PVC pipes & fittings, testing the pipe line against leakage & making good to damages etc. all complete. |
| 48 | Supplying all materials, labours, taxes and T&P etc for fitting & fixing of U-PVC/Sch. PVC pipes (ORIPLAST/Equvalent make) of following dia to walls,ceiling and floors with clamps/hooks & including making good to damages etc. all complete.15 mm dia PVC (ASTM) pipe |
| 49 | 20 mm dia PVC (ASTM) pipe |
| 50 | 25 mm dia PVC (ASTM) pipe |
| 51 | Supplying all materials, labour, T & P in all floors for fitting & fixing of U-PVC fixtures of the following diameter including supply of required jointing materials etc. all complete25 mm dia Ball Valve |
| 52 | 20 mm dia union |
| 53 | 20 mm dia elbow |
| 54 | 20mm dia Tee |
| 55 | Supplying all materials, labour, T & P in all floors for laying in trenchs unplastisized PVC SW pipes confirming to IS:4985-2000 class-IV (4Kgf/Cm2) of following ominal bore including supply of jointing materials and testing etc. all complete 75 mm dia PVC pipe |
| 56 | 110mm dia PVC pipe |
| 57 | Supplying all materials, labour, T & P in all floors for fitting and fixing of PVC SW pipe fittings of the following diameter to walls with nails, bobbins,wooden plugs laying in trenches including jointing with rubber lubricant by non-heat appliction method, testing, earthwork in excavation and refilling of trenches etc-all complete110 mm dia plain Tee |
| 58 | 75 mm dia plain Tee |
| 59 | 75 mm dia plain bend |
| 60 | 75 mm dia cowl |
| 61 | 110/75/50 mm dia clamp |
| 62 | Supplying all materials, labour, T & P and fixing SINTEX/Equivalant OH water storage tank including cutting holes through the tank and fixing PVC tubes, fittings, sockets etc including hoisting upto a height of 5 m. above ground level and placing in required position over RCC beam and R.C.C. slab along with provision of brick work in CM (1:6) for circular protection wall around the tank including centering, shutering, watering, conveyance of all materials etc- all complete.1000 lit PVC tank Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 19, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 02, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 6 daysNov 04, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 8 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender