Tender For Improvement Of Aae Office, Asika
Tender Value
4.17 Lakhs
Estimated cost
Bid Submission
02 Nov 2026
6 days left
EMD
4172
Bank guarantee accepted
Document Fee
2000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Ganjam → Odisha
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Improvement Of Aae Office, Asika
BOQ
| Sl. No. | Item Description |
| 1 | Earth work in excavation of foundation in all kinds of soil including moorum, stony earth mixed with boulders (except sheet rocks and boulders requiring blasting) with all leads and lifts including dressing and leveling the bed and depositing the excavated earth at places away from work site with all leads and lifts including cost of all labour and T&P and dewatering if required for the works etc. complete as directed by the Engineer-in-charge. |
| 2 | Supplying, spreading and fixing consolidating moorum by proper watering and rolling including cost, conveyance and royalty of moorum complete |
| 3 | Supplying, filling in foundation and plinth with sand including watering and ramming with cost, conveyance, royalties and taxes of sand with labour and T&P required for the work etc. complete (Measurement will betaken on finished compacted section only). |
| 4 | C.C.( 1:4:8) in foundation and floors using 4cm (1½”) size HGCB metal with all labour,cess and T&P required for the work etc. complete in all respect. |
| 5 | Cement Concrete (1:2:4) with 12 mm CBHG chips including hoisting and laying per 1 cum |
| 6 | Brickwork (1:6) with 23 cm FA Bricks having crushing strength 75 kg/sqcm in F&P including cost conveyance and royalty of materials curing etc complete |
| 7 | Supplying , fitting and fixing of openable UPVC doors with door frame of approved make with 6mm thick glass of approved quality complete with frame, shutters and all fitting and fixture |
| 8 | Supplying , fitting and fixing of two track UPVC sliding window of approved make with 6mm thick glass of approved quality complete with frame, shutters and all fitting and fixtures. |
| 9 | Providing, fitting & fixing of Aluminium door with OEL anodized Al door section of 9202 as vertical member, 9201 as top member and 9200 as bottom & middle member and 12mm prelaminated board fixed on door frame by means of tapered clip No 4660 and the frame to be completed by means of jointing angle No 1855 including all cost of labour, T&P, hire charges of drilling machine, labour charges etc complete. |
| 10 | Supplying and Fixing of Roller blinds by fixing powder coated top channel, bottom channel with bottom end cap, control unit and good quality of 0.6 mm thick fabric of approved design and quality etc. Complete |
| 11 | Cost, Conveyance, supply, fitting and fixing of stainless steel letters as sign board of office on wall of appropriate size. Height at least 30 cm |
| 12 | Providing fitting and fixing of false ceiling with 4 mm thick Cement fibre board with Aluminum anodised T Section No. 3215 with 2'-0 center to center, L section NO. 1705 upto 15 micron on 4 walls to be fixed by means of steel screw and P.V.C plug and the Aluminium grid 2-0 x 2\\" - 0\\" etc. complete. |
| 13 | 12 mm (½”) thick cement plaster (1:6) finished smooth to outside smooth surface of brick walls after raking out the jointincluding watering and curing with cost, conveyance, royaltiesand excluding GST of all materials with all labour and T&Prequired for the work etc. complete in all respect. |
| 14 | Priming one coat to wall surface with water bound cement primer including cost, conveyance,excluding GST of all materials, labour and T&P etc. Complete |
| 15 | Finishing exterior walls with weather coat of approved shade two coats on new work to give an even shade including cost of paint. |
| 16 | Dismantling brick masonary in cement mortar under 3 mt height including stacking the useful materials for re-use and removing the debris within 50 mt. Lead |
| 17 | Providing, fitting and fixing of wall paneling made up with 19 mm BWR board fixed on frames of size 2' x 2' made up with 2 1/2\\" x 1 1/2\\" size aluminium channel including drilling holes with rawl plug and screws pasting 1mm thick laminates on exposed surface with adhesive and headless pin with all accessories complete. |
| 18 | 4 cm thick grading concrete (1:2:4) on roof slab with 12mm & downgrade size black hard granite chips for Old work per 1 sqm. In GF |
| 19 | Recessed wirring to light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor of ISI marked Make- Finolex/Anchor/Polycab/HAVELLS/RR KABLE/KEI with 20 mm dia HMS FRLS PVC conduit ISI marked Make-AKG/BEC/Precision/Norpak/Anchor/Kinjal 6A modular type ( flame retradant type) switch ISI marked Make-Schneider (Zencelo)/legrand( Myrius) /Panasonic (vision) and ceiling rose ISI marked of modular type G.I box with metallic cover plate (both side) ( flame retradant type) Make-Schneider(Zencelo)/legrand( Myrius) /Panasonic (vision) of suitable size, modular box with 1.5 sq. Mm FRLS PVC insulated single core multistandard copper conductor as earth wire including all accessories and connection as per direction of Engineer -in -Charge. . All the switches & sockets should be warrantied for a replacement period of 2 years against defects with ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free after sales service within warranty period for acceptance of materials. |
| 20 | S/F of 36 watt, (2'x2') LED Square Light, recessed fitting (Phillips/Bajaj/Havells) with all complete |
| 21 | S/F of Power Point with 2 Modular & 4 Modular metal box with Modular base & Cover in recess including providing & fixing of 5 pin 15/16 Amp Modular Switch & Socket with Mini DP MCB connection as required for AC |
| 22 | S/F of Ceiling Fan 48\\" (1200 mm) aluminium body, copper winding with accessories & connection without reglator(Make-Crompton/Havells/Usha/eqv.) Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 19, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 02, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 6 daysNov 04, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 8 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender