Tender For annual repair & maintenance of Residential Building Under Sd-Iv, Cd-I, Apwd, Rangat.Sub Work: Renovation Of Inspection Bangalow For Wooden Building At Kadamtala (Balance Work).
Tender Value
29.99 Lakhs
Estimated cost
Bid Submission
30 Oct 2026
3 days left
EMD
59998
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
North and Middle Andaman → Andaman And Nicobar Islands
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for annual repair & maintenance of Residential Building Under Sd-Iv, Cd-I, Apwd, Rangat.Sub Work: Renovation Of Inspection Bangalow For Wooden Building At Kadamtala (Balance Work).
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead : |
| 2 | Of area 3 sq. metres and below |
| 3 | Dismantling wooden boardings in lining of walls and partitions, excluding supporting members but including stacking within 50 metres lead : |
| 4 | Thickness above 10 mm up to 25 mm |
| 5 | Thickness above 25 mm up to 40 |
| 6 | Dismantling wood work in frames, trusses, purlins and rafters up to 10 metres span and 5 metres height including stacking the material within 50 metres lead : |
| 7 | Of sectional area 40 square centimetres and above |
| 8 | Providing and fixing bright finished brass butt hinges with necessary screws etc. complete: |
| 9 | 100x85x5.5 mm (heavy type) |
| 10 | 75x65x4 mm (heavy type) |
| 11 | Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc. complete : |
| 12 | 150x10 mm |
| 13 | 100x10 mm |
| 14 | Providing and fixing bright finished brass handles with screws etc. complete: |
| 15 | 200 mm |
| 16 | 100 mm |
| 17 | Providing and fixing bright finished brass casement stays (straight peg type) with necessary screws etc. complete : |
| 18 | 250 mm weighing not less than 280 gms |
| 19 | Providing and fixing factory made P.V.C. door frame of size 50x47 mm with a wall thickness of 5 mm, made out of extruded 5 mm rigid PVC foam sheet, mitred at corners and joined with 2 Nos of 150 mm long brackets of 15x15 mm M.S. square tube, the vertical door frame profiles to be reinforced with 19x19 mm M.S. square tube of 19 gauge, EPDM rubber gasket weather seal to be provided through out the frame. The door frame to be fixed to the wall using M.S. screws of 65/100 mm size, complete as per manufacturer's specification and direction of Engineer- in-Charge. |
| 20 | Providing and fixing factory made panel PVC door shutter consisting of frame made out of M.S. tubes of 19 gauge thickness and size of 19 mm x 19 mm for styles and 15x15 mm for top & bottom rails. M.S. frame shall have a coat of steel primers of approved make and manufacture. M.S. frame covered with 5 mm thick heat moulded PVC 'C' channel of size 30 mm thickness, 70 mm width out of which 50 mm shall be flat and 20 mm shall be tapered in 45 degree angle on both side forming styles and 5 mm thick, 95 mm wide PVC sheet out of which 75 mm shall be flat and 20 mm shall be tapered in 45 degree on the inner side to form top and bottom rail and 115 mm wide PVC sheet out of which 75 mm shall be flat and 20 mm shall be tapered on both sides to form lock rail. Top, bottom and lock rails shall be provided both side of the panel. 10 mm (5 mm x 2 ) thick, 20 mm wide cross PVC sheet be provided as gap insert for top rail & bottom rail, paneling of 5 mm thick both side PVC sheet to be fitted in the M.S. frame welded/ sealed to the styles & rails with 7 mm (5 mm+2 mm) thick x 15 mm wide PVC sheet beading on inner side, and joined together with solvent cement adhesive. An additional 5 mm thick PVC strip of 20 mm width is to be stuck on the interior side of the 'C' Channel using PVC solvent adhesive etc. complete as per direction of Engineer-in-charge, manufacturer's specification & drawing. |
| 21 | 30 mm thick plain PVC door shutters |
| 22 | Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: |
| 23 | White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps |
| 24 | Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required : |
| 25 | W.C. pan with ISI marked white solid plastic seat and lid |
| 26 | Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet : |
| 27 | 100 mm diameter |
| 28 | Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour. |
| 29 | 600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 190 gms. |
| 30 | Providing and fixing PTMT soap Dish Holder having length of 138 mm, breadth 102 mm, height of 75 mm with concealed fitting arrangements, weighing not less than 106 gms. |
| 31 | Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing : |
| 32 | Rectangular shape 453x357 mm |
| 33 | Providing and fixing 600x120x5 mm glass shelf with edges round off, supported on anodised aluminium angle frame with C.P. brass brackets and guard rail complete fixed with 40 mm long screws, rawl plugs etc., complete. |
| 34 | Providing and fixing toilet paper holder : |
| 35 | C.P. brass |
| 36 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings and fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. |
| 37 | 20 mm nominal dia Pipes |
| 38 | 25 mm nominal dia Pipes |
| 39 | Providing and fixing brass bib cock of approved quality : |
| 40 | 20 mm nominal bore |
| 41 | Providing and fixing brass stop cock of approved quality : |
| 42 | 20 mm nominal bore |
| 43 | Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50 mm hard wood plugs, screwed with M.S. screws of required length, including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete. |
| 44 | 110 mm |
| 45 | Applying priming coat: |
| 46 | With ready mixed aluminium primer of approved brand and manufacture on resinous wood and plywood |
| 47 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade: |
| 48 | Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture |
| 49 | Providing and fixing CP brass health faucet with 1 mtr long CP flexible pipe i/c wall hook etc all complete as per the direction of Engineer-in-charge. |
| 50 | 15mm nominal dia |
| 51 | Providing and fixing CP brass hand shower with 1.5 mtr flexible pipe i/c wall hook etc all complete as per the direction of Engineer-in-charge. |
| 52 | 100 mm dia |
| 53 | Providing and fixing PVC pipe for weep hole including cutting, placing in position as per the direction of Engineer-in-chagre. |
| 54 | 50 mm dia |
| 55 | Providing and fixing UPVC moulded door bend of required degree with access door insertion rubber washer 3 mm thick, bolts and nuts complete for UPVC soil pipes conforming to IS : 13592 Type B including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion. |
| 56 | 110 mm dia |
| 57 | Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position: |
| 58 | Ornamental wood cat- I (A) (Padauk) |
| 59 | Superior hard wood of cat-II (A). |
| 60 | Providing and fixing glazed shutters for doors, windows and clerestory windows using 4 mm thick float glass panes including ISI marked stainless steel butt hinges bright finished of required size with necessary screws. |
| 61 | 35 mm thick with ornamental wood cat-I (Padauk) |
| 62 | Wall panelling with 12mm thick superior quality chemically treated, edge glued finger joined ISO certified rubber wood (Rubco Huat wood or equivalent) tongued and grooved panels of size 20cm wide, peripheral skirting/beading at top and bottom,side beadings at all doors and windows etc. all fixed with headless secrete nailing over 18mm thick horizontal frame work including also including the cost of making openings for light fittings, grills, diffusers, cutouts and polishing with melamine polish after proper surface preperation as per manufacturer's specification and direction of Engineer-In-Charge upto making the surface smooth finished etc. all complete. |
| 63 | Providing and fixing 5mm thick SPC flooring, click-locking system including underlay/IXPE layer, necessary cutting, fitting, accessories etc complete as per direction of Engineer-in-charge. |
| 64 | Providing and fixing marine plywood in flooring i/c fixing with necessary nails etc complete as per the direction of Engineer-in-charge. |
| 65 | 19 mm thick marine plywood (Green ply or equivalent conforming to IS 710) |
| 66 | Providing and fixing bright finished brass sliding door bolt with necessary screws etc. complete of approved quality as per the direction of Engineer-in-charge. |
| 67 | 300x16 mm Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 17, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 30, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 3 daysOct 30, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 3 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender