Tender For Installation Of Deep Boring In Jamunitand Basti Under Lohapihidi Panchayat
Tender Value
4.24 Lakhs
Estimated cost
Bid Submission
26 Oct 2026
0 days left
EMD
8500
Bank guarantee accepted
Document Fee
750
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Dhanbad → Jharkhand
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Installation Of Deep Boring In Jamunitand Basti Under Lohapihidi Panchayat
BOQ
| Sl. No. | Item Description |
| 1 | Cost of Drilind 200 mmx165mmx125 mtr.deep bore well in all kind of Soil and rock in rural area for instalation of pump set with Hydrolic DTH Rig machine all complete including all materials, tools,driling rig, air compressure and equipments as well as fule, lubricants and cost of transportation of rig machine annd other vehical up to Site.(a) From 0.00 M to 50.00 M below G.L. |
| 2 | (b) From 51.0 M to150.00 M |
| 3 | Supplying, assembling, lowering and fixing in vertical position in bore well, unplasticized PVC medium well casing (CM) pipe of required dia, conforming to IS: 12818, including required hire and labour charges, fittings & accessories etc. all complete, for all depths, as per direction of Engineer -in-charge.200 mm nominal size dia |
| 4 | Development of tube well in accordance with IS : 2800 (part I) andIS: 11189, to establish maximum rate of usable water yield withoutsand content (beyond permissible limit), with required capacity aircompressor, running the compressor for required time till well isfully developed, measuring yield of well by \\"V\\" notch method or anyother approved method, measuring static level & draw down etc. bystep draw down method, collecting water samples & getting testedin approved laboratory, i/c disinfection of tubewell, all complete,including hire & labour charges of air compressor, tools & accessoriesetc., all as per requirement and direction of Engineer-in-charge |
| 5 | Supplying and commissionig of submersible pump set conforming to IS 8034 and motor conforming to IS 9283 should be suitable for various head and discharge with stainless steel pump soft and polypyenen -do-do- all complete job aas per specification and direction of E/I . 100 MM dia 1.5 HP Pump (sl. 139 M 1055, PG- 124 Part A) |
| 6 | providing and fixing M.S clamp of required dia to the top ofcasing/housing pipe of tubewell as per IS: 2800(part I) including necessary bolts & nuts of required size complete 200 mm clamp |
| 7 | Supplying fitting and fizing 3 crore 4 sqmm flat copper submemersible cable Finolex/Hevels make including all taxes royality etc. al complete job as per direction of E/I |
| 8 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes,having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittingswith one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge.40mm nominal outer dia pipe |
| 9 | Supplying fitting of standard make starter pannel board with arrangement of aa necessary protection inlcuding all taxes royalty etc all complete job as per direction of E/I |
| 10 | Polythene water stoarage tank of ISI mark(e.g Sintex/sinter/Himgiri/Gangotri etc.) with cover and locking system |
| 11 | Supplying all tools equipments, labours and lowering 32 mm dia G.I. suspension pipe in 3 m length in the drilling bore of tube well etc. all complete job as direction of E/I. |
| 12 | Providing labour for fitting and fixing deep well cylinder jointing materials, crome lether bucket all tools and plant etc. required for the job for low water level all complete job as direction of E/I. |
| 13 | Providing all labours, fitting and fixing of India mark - II, hand pump including supplying all tools and plant for the all complete job as direction of E/I. |
| 14 | Supplying all materials, labours and equipments for constructing P.C.C. (1:2:4) circular platfarm around each drilled tube well including 12 mm thicks cement plaster (1:4) with neat (1.5 mm) cement punning over exposed surface as per UNICEF design etc. all complete job as direction of E/I. |
| 15 | Supplying all materials, labours and equipments for constructing P.C.C. (1:2:4) Drain including 12 mm thicks cement plaster (1:4) with neat (1.5 mm) cement punning over exposed surface as per UNICEF design etc. all complete job as direction of E/I. |
| 16 | Cost of standard. I.S.I. marks deep well hand pump for India mark - II, confirming to I.S.I : 15500 (Part - II) / 2004 with latest revision including12mm x 3 meter long 8 no. connecting rod made of bright bar electro galvanized fitted with coupler & normal stand assembly recommended for use with cylinder assembly suitable for bore well casing pipe |
| 17 | Cost of 32 mm dia G.I. medium quality pipe 3 m long screwed at bath ends with seamless socket as per I.S. : 1239 (Part - I) / 2004 with letest ammendment including all taxes, royalty and contractor profit etc. |
| 18 | Earthwork in excavation in foundation trenches in ordinary soil (videclassification of soil item B) and disposal of excavated earth as obtained to a distance upto 50 M. including all lifts, levelling ,ramming the foundation trenches,removing roots of trees, shurbs all complete as per approved design,building specification anddirection of E/I. |
| 19 | Providing,coarse clean sand in filling in foundation trenches/in plinthincluding ramming & watering in layers not exceeding 150 mm thick with all leads and lifts including cost of all materials, labour, royalty,& taxes all complete as per building specification & direction of E/I.(mode of measurement compacted volume) |
| 20 | Providing designation 75 B one brick flat soling joints filled with localsand including cost of watering,taxes royalty all complete as per building specification anddirection of E/I. |
| 21 | Providing designation 75 B Brick work in CM(1:6) In foundation andplinth do-do-E/I |
| 22 | Providing P.C.C.M20 with nominal mix of (1:1.5:3) in foundation withapproved quality of stone metal grade-III (50 mm to25mm size)clean coarse sand of F.M. 2.5 to 3including screening,shuttering,mixing cement concrete in mixer and placing in position,vibrating,striking,curing taxes and royalty all complete. as per building specification and direction of E/I. |
| 23 | Providing tor steel reinforcement of 10mm, 12mm & 16mm dia bars as per approved deign and drawing as per building specification and direction of E/I (a) 10mm (TMT coil Fe 500) (only valid for TATA(Tucson), SAIL, JSPL, Elcetrosteel Ltd. Bokaro and Vizag(RINL) (b) 12mm (TMT coil Fe 500) (only valid for TATA(Tiscon), SAIL, JSPL, Elcetrosteel Ltd. Bokaro and Vizag(RINL) (c) 16mm (TMT coil Fe 500) (only valid for TATA(Tiscon), SAIL, JSPL, Elcetrosteel Ltd. Bokaro and Vizag(RINL) |
| 24 | Providing 12 mm thick cement plaster(1:4) with clean coarse sand ofFM1.5including screening,curing,with all leads and lifts of water,scaffolding,taxes and royalty all complete as per specification and direction of E/I. |
| 25 | Filling in foundation trenches and plinth in layers not exceeding 150 mm thick wall watered, rammed, fully compacted and -- do-- E/I |
| 26 | Supplying, fitting and fixing CPVC pipes, fittings, bib cocks confirmingrelevant IS specifications including cost of all materials, labours etc all complete job as perstandard specifications and direction of E/I. |
| 27 | Providing and fixing of male ended c.i body brass spindle valve and seat bib cock of approved quality with extra socket all cop as per specification and direction of E/I. |
| 28 | Sand (Lead 17Km.(P)) |
| 29 | Brick (Lead 8 Km.(P)) |
| 30 | Stone Chips (Lead 15 Km.(P)) |
| 31 | Cement + rod (Lead 10Km.(P)) |
| 32 | Add cost for Signboard and Photography |
| 33 | Goods & Service Tax (G.S.T. 18%) |
| 34 | 1% Labour Cess Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 17, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 26, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedOct 28, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 1 dayTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender