Tender For Civil Upgradation Phase Iii Of Rcl Plant And Shed S60 At South Site, Barc, Trombay, Mumbai-400085.
Tender Value
1.17 Crore
Estimated cost
Bid Submission
12 Nov 2026
14 days left
EMD
2.76 Lakhs
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Mumbai Suburban → Maharashtra
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Civil Upgradation Phase Iii Of Rcl Plant And Shed S60 At South Site, Barc, Trombay, Mumbai-400085.
BOQ
| Sl. No. | Item Description |
| 1 | Aluminium Composite Metal PanelDesigning, providing and fixing of 4 mm thick approved make and shade Aluminium Composite Metal Panel of approved make cladding at different locations including soffits of over-hangs but excluding aluminium frame work with grids filled in with weather silicon sealant as per the drawings. The ACM panel composition shall be of 0.5 mm thick PVDF coated aluminium sheet + 3 mm thick low density polyethelene virgin resin core + 0.5 mm thick polyester (PVDF) coated Aluminium sheet all complete as per approved shop drawings and specification (Aluminium frame work will be paid under reelevant item) |
| 2 | Aluminium work Providing and fixing anodized aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections / Z sections and other sections of approved make conforming to IS 733 and IS 1285 fixed with rawl plugs and screws or with fixing clips or with expansion hold fastners including necessary filling up of gaps at junctions, at top, bottom and sides with required PVC / neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically whereever required including cleat angle, aluminium snap beading for glazing / panelling, C.P brass / stainless screws all complete as per drawings and and directions of Engineer-in-charge including providing and fixing hinges / pivots and making provision for fixing of fittings wherever required including the cost of PVC / neoprene gasket required filling the gaps using silicon grout sealent etc. (fittings glazing and panelling shall be paid for separately)Anodised Aluminium sections (Minimum anodizing thickness of 15 micron) |
| 3 | Extra for colour anodizing |
| 4 | MS hollow tubular sectionsProviding, supplying, cutting, welding, fabricating, hoisting and fixing in position structural steel members like trusses, purlins, posts etc. using MS hollow / circular / square / rectangular tubular sections including appling a coat of Zinc chromate primer of approved make all as per specifications, drawings and as directed by the Engineer in charge |
| 5 | Structural SteelProviding Structural steel work using angles, channels, joists, MS plates and other sections, welded and / or bolted in built up sections for trusses , structural steel floors, frame works, monorails and other structures including supplying, cutting, welding, fabricating, hoisting, fixing in position, applying a priming coat of approved steel primer etc. complete all as per specifications, drawings and as directed by the Engineer in charge Up to and including 300 mm Joists, 350 mm channels, MS plates and below sections using materials produced by SAIL / RINL (Vizag Steel) / TATA. All test reports to be provided along with the supply of the materials |
| 6 | M.S Plain Plates and chequrred Plates Providing Structural steel work in M.S Plain Plates and chequrred Plates for Embedded Parts, Trench Covers, Connection plates etc.including cutting, hoisting, fixing in position and applying a priming coat of approved zinc chromate steel primer etc.including cost of structural steel Plates, welding all labour charges etc. complete as per drawings and specifications. Using materials produced by the own plants of SAIL , RINL (Vizag Steel) and TATA only using virgin materials. All test reports to be provided along with the supply of the materials |
| 7 | Reinforcement SteelProviding Reinforcement Steel for reinforced cement concrete at all levels including supplying, preparation of bar bending schedules, cutting, bending, transporting, fixing, tieing in position with PVC coated G.I binding wire, all labour charges, cost of cover blocks in specified grade of concrete etc. complete as per specifications and drawings. Steel supplied by the contractor Using TMT bars of specified grades of all sizes. TMT bars to be supplied by the contractor from the own plants of SAIL, RINL or TATA make only using virgin materials |
| 8 | Shuttering Form work Providing , centering ,shuttering Form work using PVC Film faced plywood to get a neat form finish surface for all types of structures including necessary strutting, proping, staging, supports etc and deshuttering the same after the specified time all as per drawings and specifications at all levels. For Super structure. |
| 9 | Reinforced Cement Concrete (RCC) M-30Providing and laying in position Reinforced Cement Concrete (RCC) of grade M-30 using 20mm maximum size aggregates and crushed sand of approved quality including admixtures of approved brand and quality (plasticiser or super plasticiser) if required, including weigh batching, mechanical mixing, transporting, placing, vibrating, consolidation, finishing, curing etc. complete but excluding the cost of centering, shuttering and reinforcement complete as per specifications up to Plinth Level. |
| 10 | PCC 1:1.5:3Providing and laying in position cement concrete of 1:1.5:3 at all levels (1 cement, 1.5 crushed sand, 3 graded stone aggregate of nominal size 20 mm) including consolidation, finishing, curing etc.. complete as per specifications and drawings but excluding the cost of shuttering, centering and steel reinforcement. |
| 11 | Extra for RCC& PCC Using Ready Mix Concrete from outside project area including transporting and pumping from approved batching plants . |
| 12 | 50 mm thick cement concrete flooringProviding and laying 50 mm thick cement concrete flooring with concrete hardner topping under layer 38 mm thick cement concrete 1:2:4 and top layer 12 mm thick wearing surface with metallic floor hardner, cement being mixed with metallic floor hardner of approved quality and make in the ratio of 4:1 (4 cement and 1 metallic floor hardner) by weight and this cement hardner compound mixed with 6 mm down graded stone aggregate in the ratio of 1:2 by volume including providing and fixing 25 X 3 mm aluminium strip,This includes cost of cement slurry, finishing to the required finishing and cleaning neatly while handing over the areas etc. complete as per specifications and drawings. |
| 13 | Brick workProviding and constructing Brickwork in cement mortar 1:4 using crushed sand with Flyash/ Flyash Lime bricks with minimum 70 kg/ sq.cm strength of approved make and size in super structure up to and including Floor II Level including, scaffolding, raking out joints, curing, cleaning complete all as per specifications and drawings.\\" |
| 14 | 15 mm thick internal plasteringProviding 15 mm thick plastering using Ready mix internal plastering compound of approved make for internal faces of brickwork / concrete surfaces including preparation of the surface, curing, cleaning, scaffolding complete all as per specifications and as directed at site by the Engineer-in-charge |
| 15 | Micro concreteProviding SFMC Micro concrete for strengthening of structural members including mixing, pouring, curing as per manufacturer specifications and as directed by the Engineer-in-chargeUsingSFMCwith50%Quartz aggregate by weight (Only SFMC consumed alone will be measured for payment |
| 16 | Providing and fixing shear connectors for structural repairing of beam/ Column using following methods; 1.Cleaning the worn out portions of the RCC member with wire brush. 2.Cleaning the reinforcements properly with wire brush and applying a coat of Nitozinc Primer or equivalent to protect the reinforcements. 3.Drilling holes of 12mm dia for fixing shear connectors of 8mm or 10mm dia with Hilti Chemical anchors at a spacing of 150mm c/c includes Cleaning the holes and fixing 8mm or 10mm dia shear connectors make using Epoxy chemical mortar of HILTI HIT RE500/HY200 make or equivalent make to be approved by EIC as required at site and as per instructions of EIC including all machineries, labour, consumables, tools and tackles etc with safety precautions etc. complete. |
| 17 | Structural repairsProviding structural repairs in old damaged concrete structures / surfaces with approved Polymer with following operations 1) Removal of loose/Spalled or damaged concrete by chipping and cleaning the concrete surface and reinforcement steel with wire brush and with water 2) Cleaning the re bars with Acetone for complete rust removal and washing with water to make the surface clean. 3) Applying protective coat / bond coat using polymer and cement in the proportion of 1; 1.5 (1 part of polymer and 1.5 parts of cement in synthetic enamal paint like consistancy with brush 4) Reinstate the area with polymer modified mortar in layers of maximum 20 mm with the proportion of Cement 50 Kg : washed and dried river sand 87.50 kg ; silica sand 37.50 Kg. mixed with 10 litres of Polymer (or 1 Kg cement : 1.75 kg washed and dried river sand ; 0.75 Kg silica sand : 200 ml polymer)5) If thickness of repair exceeds 20mm , after every 20 mm thick repair, bond coat as per 2 above to be applied and further thick of repair to be continued for each layer. This work is inclusive of all materials, labour, complete all as directed at site using approved polymer suitable for structural repair shall be used) |
| 18 | G.I. chicken meshProviding and fixing G.I. chicken mesh in the junctions of concrete & brick work / masonry or as directed by the Engineer in charge including cutting, fixing with nails in position before plastering complete all as directed by the Engineer-in-charge. (only area of the chicken mesh used alone will be measured) |
| 19 | Pressure Cementitious Grouting Pressure Grouting to existing brick/siporex bat coba waterproofing treatment over RCC slab with fine POLYMER MIXED cementitious grouting materials of approved make with approved method including making holes by drilling, fixing grouting nozzles or grouting port nozzles or grouting packer sizes given below about @ 600 mm c/c in zigzag or approved pattern by using 12 mm Φ x 100 mm long nozzles with drilling upto 25 mm depth in RCC slab; removing the nozzles after completing of grouting job, filling/repairing the holes with polymer modified mortar; curing, arrangement of suitable pumps/tool & tackles, drilling machine ; etc complete as per clause of specifications and as directed by E-I-C. Note: 1). Payment for nozzles will be made in relevent item. 2) Scaffolding will be paid separately under relevant item |
| 20 | Providing & fixing PVC/metallic Nipples/packers with epoxy putty/mortar or polymer mortar |
| 21 | PU foam insulated roofing of sandwich type Providing and fixing in position 30 mm thick PU foam insulated roofing of sandwich type (PUF density approx. 40 Kg per cu.m) corrugated colour coated metal roofing sheets panel having 0.45 mm minimum skin thickness on both side of approved colour shade and make including providing overlaps, necessary screws / bolts / nuts, and washers as per manufacturer’s specifications including re-sizing / cutting the sheets as required etc. complete as manufacturer’s specifications and as directed by EIC. Note: The building wall side shall be make water tight as described in relevant item |
| 22 | Roofing accessories like ridges, gutters, aprons and flashings.Providing and fixing precoated Galvalume roofing accessories for PUF sheet roofing ands well as galvalum shhet roofing using self drilling / self tapping screws or with polymer coated J or L hooks, bolts and nuts and or G.I. seam bolts and nuts, G.I. plain and bitumen washers complete.Roofing accessories of colour coated Galvalume sheet up to 600 mm total widthand mininum 0.5mm thick for ridges, gutters, aprons and flashings. Flashing along building side wall to prevent leakage through walls by cutting and making 10mm grooves at existing masonry walls and after inserting the sheets, sealing shall be done as per manufactures specifications. Shade of flashing shall be match with roofing sheets. |
| 23 | PUF sheet roofing end capProviding and fixing roof end cap for insulated sandwich (PU foam) roofing , shade shall be matched with roofing sheets as per manufacturer specifications. |
| 24 | PUF sheet roofing Side capProviding and fixing roof Side cap for insulated sandwich (PU foam) roofing, shade shall be matched with roofing sheets as per manufacturer specifications. |
| 25 | Self levelling Epoxy flooringProviding and laying 4mm thickness Self levelling Epoxy flooring , including preparation of the surface, primer coat,screeding & levelling coat and finishing coat with Polyurethene coat of approved colour and shade of approved make all as per manufacturers specifications complete as directed at site by the Engineer-in-charge (This Job to be carried out through a specialized approved agency) |
| 26 | Double tubular scaffolding systemProviding and fixing double tubular scaffolding system using H- frames with cup lock type on the exterior side upto seven story height made with 40 mm dia M.S. tube 1.5 m centre to centre horizontal and vertical tubes joining with cup and lock system with M.S. tubes, M.S. tube challies, M.S clamps and M.S staircase system in the scaffolding for working platform etc. and maintaining it in a serviceable condition for the required duration as approved and removing it thereafter. The scaffolding system shall be stiffened with bracings, runners, connection with building etc. wherever required for inspection of work at required locations with essential safety features for the workmen etc. complete as per directions and as approved by the Engineer -in - charge. The elevational area of the scaffolding shall be measured for payment purposes. The payment shall be made once irrespective of duration of scaffolding |
| 27 | PVC rain water pipes of size160 mm O/D Providing and fixing PVC rain water pipes conforming to relevant IS type B and PVC SWR fittings & specials conforming to relevant IS including jointing with seal ring / With PVC solvent adhesive including fixing in walls using clamps etc complete all as per drawings, specifications and as directed by the Engineer-in-charge.SWR PIPE 160 mm O/D |
| 28 | Clear float glass Providing and fixing glazing in aluminium doors, window, ventilator shutters and partitions etc with PVC / Neoprene gasket etc. complete as per the architectural drawings and directions of the Engineer-in-charge (Cost of snap beading shall be paid in basic item) With clear float glass panes of 6.00 mm thickness |
| 29 | Silicon sealantFilling the gap between aluminium frame & adjacent RCC / Brick work / Stone work by providing weather silicon sealant over backer rod of approved quality as per architectural drawings and direction of Engineer-in-charge complete Up to 5 mm depth and 5 mm width |
| 30 | FRP door shuttersProviding and fixing FRP door shutters flush door / panelled type with plain colour or wooden veneer finish of approved make, design & colour. made out of 1.5 mm thick FRP skin moulded over wooden frame work of 40 mm wide and required thickness wooden styles and minimum 100 mm wide lock rails and wooden blocks for door stoppers, tower bolts, baby latch, aldrop, handles etc. wherever required and core filled with Polyurethane Foam and fixing with 4 Nos 100 mm (ISI marked) stainless steel hinges with S.S. wood screws 35 mm thick panelled door type of approved colours including the cost of 100 mm ISI marked heavy quality stainless steel butt hinges with necessary screws. |
| 31 | Tower boltsof size 300 X 12 mmProviding and fixing stainless steel tower bolts of size 300 X 12 mm of approved make with necessary screws etc. all as per specifications and as per drawings. |
| 32 | Tower bolts of size 150 X 12 mm Providing and fixing stainless steel tower bolts of size 150 X 12 mm of approved make with necessary screws etc.all as per specifications and as per drawings. |
| 33 | S.S. butt hingesProviding and fixing IS:12817 marked stainless steel butt hinges of size 125 x 64 x 2.5 mm (heavy weight)\\" GARG' or equivalent approved make with suitable stainless steel screws etc. complete |
| 34 | Stainless steel \\"C\\" type door handlesProviding and fixing pair of stainless steel \\"C\\" type door handles 19 mm dia, 250 mm long SS 304 grade solid rod , of specified size in steel doors/ wooden doors including screws / bolts etc. all as per drawings and specifications complete. |
| 35 | Mortice lock for aluminium doorProviding and fixing approved Ramson/ Godrej make Mortice lock 4 lever with necessary screws, to the Aluminium doors as per specifications including all materials, labour etc. and as directed by the Engineer- In- Charge. |
| 36 | Universal hydraulic door closerProviding and fixing IS: 3564 marked Al die cast body tubular type universal hydraulic door closer with necessary accessories and screws etc. in wooden doors / steel doors with necessary bolts & nuts \\" Everite/ Hardwyn/Godrej\\" or approved equivalent make complete as per specifications and as directed by the project Engineer. |
| 37 | Key less latchProviding and fixing \\"Godrej\\" make mortice Key less latch with chrome or Powder Coated finish and a pair of lever handles with necessary screws etc complete in all kind of airlock, bath / toilet Doors / false ceiling trap doors. |
| 38 | Providing and Fixing Anchor Fastner HST4 Wedge anchor Type (Stud anchor HST4 M12x145) i.e.12 MM diameter 145 mm Long of HILTI or as approved make including drilling in concrete as per requirement for fixing Eps or other structures all as specified by the manufacturer complete all as per specifications and drawings.. |
| 39 | Providing and Fixing Anchor Fastner HST4 Wedge anchor Type (Stud anchor HST4 M10x130) i.e.10 MM diameter 130 mm Long of HILTI or as approved make including drilling in concrete as per requirement for fixing Eps or other structures all as specified by the manufacturer complete all as per specifications and drawings. |
| 40 | Miscellaneous civil worksCarryiing out Miscellaneous civil works by providing suitable unskilled plumber/mason with valid police verification certificate for entire contract period. Item includes providing set of necessary hand tools, etc required for civil maintenance works for entire period of contract. NOTE: Suitable manpower shall be deployed for the job assigned with safety gears as & whenever required. workforce shall be deployed as per requirement, including holidays & late working if required. |
| 41 | 20mm n.b.Gate ValvesProviding & fixing in position heavy pattern screw down gun metal gate valve with handles and wheels of approved make including testing for 10Kg/cm2 pressure with clean and potable water with a minimum testing duration of two hours etc.as per specification and as directed by the Engineer-in-charge |
| 42 | 25 mm n.b.Providing & fixing in position heavy pattern screw down gun metal gate valve with handles and wheels of approved make including testing for 10Kg/cm2 pressure with clean and potable water with a minimum testing duration of two hours etc.as per specification and as directed by the Engineer-in-charge |
| 43 | 40 mm n.bProviding & fixing in position heavy pattern screw down gun metal gate valve with handles and wheels of approved make including testing for 10Kg/cm2 pressure with clean and potable water with a minimum testing duration of two hours etc.as per specification and as directed by the Engineer-in-charge |
| 44 | 50 mm n.bProviding & fixing in position heavy pattern screw down gun metal gate valve with handles and wheels of approved make including testing for 10Kg/cm2 pressure with clean and potable water with a minimum testing duration of two hours etc.as per specification and as directed by the Engineer-in-charge |
| 45 | 15 mm dia G.I pipe Exclusive TATA Make M.S.Galvanised pipesProviding , Laying , jointing, fixing and testing Heavy quality (C-Class) Galvanised Iron pipes and ISI marked fittings like, tees, elbows, bends, unions, nipples,reducers etc. as required for the work, including testing the pipes and fittings for 10.00 Kg / Sq.Cm hydralic pressure with a minimum period of two hours duration with clean water, including cutting , threading, jointing with hemp yarn, white lead, jointing Teflon tape, exposed / concealed by chasing walls and making good by filling with concrete 1:3:6, complete all as per specifications and drawings, including two coats of anti corrosive bitumastic paint for all concealed lines / two coats of synthetic enamel paint for all exposed lines all as directed by the Engineer-in-charge. Pipes with exclusive use of TATA make C-Class pipes. |
| 46 | 20 mm dia G.I pipe Exclusive TATA Make |
| 47 | 25 mm n/b G.I pipe Exclusive TATA Make |
| 48 | 40 mm dia G.I pipe Exclusive TATA Make |
| 49 | 50 mm dia G.I pipe Exclusive TATA Make |
| 50 | C.P. brass Urinal spreaderProviding and fixing 15 mm C.P brass urinal spreader size with 1/2\\" BSP thread and shapes, weighing not less than 60 gm of approved make and type. |
| 51 | Urinal flush cockProviding and fixing Brass 15 mm C.P presstomatic series auto shut urinal flush cock of approved make and quality and providing and fixng necessary piping arrangement for connecting to outlet system of above item. |
| 52 | Jet sprayProviding, supplying and fixing JET spray with 1.00 metre long flexible tube connection in European / Anglo Indian closet under seat cover fixtures complete all as specified and as directed by the Engineer-in-charge. Hand shower with 8mm dia 1.2 meter long flexible tube and wall hook, Model-ald-chr-573 of M/s Jaquar |
| 53 | WASH BASIN Providing and fixing viterious China wash basin of approved make and colour with C.I. brackets, 15 m C.P. brass pillar tap of approved make,15 mm x 600mm long PVC Inlet connection, 32 mm heavy quality C.P. brass waste coupling of standard pattern, including painting of fittings and brackets, cutting and making good the walls and testing complete all as per specifications and as directed by the Engineer-in-chargeWhite vitreous China wash basin size 630 x4 450 mm and equivalent sizes with single 15 mm C.P. brass pillar tap |
| 54 | Flat back urinal StallProviding and fixing white vitreous china flat back half stall urinal with fixing accessories, size 340x320x650mm, Cat No:URS-WHT-13253O of JAQUAR clamps complete all as per specifications drawings and as directed by the Engineer-in-charge. 1)Concealed 40 mm PVC waste pipe of Heavy quality connection from wash basin to Floor Trap. 2)waste coupling 32 mm size full thread with 130 mm height-ald-chr-705130. 3)Bottle Trap (with internal partition) 32 mm size with both 300 mm long connecting pipes & wall flanges -ALD-CHR-769L300X300. |
| 55 | Wall mounted EWC Providing and fixing white vitreous china European type Water Closet with 'P' or 'S' Trap with solid seat and lid of approved make, 10 litre low level white PVC flushing cistern with manually controlled device (PUSH BUTTON) conforming to IS:7231, flush bend, fixing EWC with C.P brass screws, 15 mm PVC heavy quality inlet connection of 450 mm long, including testing , commissioning & cleaning etc. complete all as per drawings and specifications and as directed by the Engineer-in-charge. Size:79x37x69cm Cat No:20028(P15.5), Cist:21056, Model-Constellation of Hindware or Size:67x38x76cm Cat No:S1031102 P Trap, Cistern-S1060102 Model-Clair of CERA |
| 56 | Bath room fittingsProviding and fixing bath room fittings like CP brass Wall Mixer 3-in-1 System with provision for both Hand Shower and overhead shower along with 600 mm long hose,200X200mm square shower head with shower arm for hand shower CP brass 95mm dia shower rose with Shower arm of Jaquar make as per specifications and as directed by Engineer-in-charge completeWall mixer Code: FLR-CHR-5281N- Florentine ; 600mm Long Braided Hose Cat No: ALD-CHR-801B; Overhead Shower 200X200mm square Shape Code: OHS-CHR-35497;Hand Shower ø95mm Round Shape Code: HSH-CHR-1737 |
| 57 | Storage type water heater/gyserSupply, installation, testing and commissioning of instant water heater of following details: a.Capacity: 25 Litre b.Power supply: 230 V , AC, 50 Hz, power supply cord shall be provided. c.Energy Efficiency class: 5 star as per BEE guideline d.PUF insulation for energy savings e.Thermal cutout f.Adjustable thermostat with automatic ON/OFF indication and variable setting oftemperature g.Mounting : Horizontal/Vertical as per site condition The heater shall be installed and tested with all mounting accessories. Provision of power supply will be measured in separate item. Water line connection is not under the scope of the bidder. |
| 58 | Washroom name plate with sign Providing and fixng toilet name plate and sign consisting with stainless steel plate, size-225x150mm for Gents toilet. |
| 59 | URINAL MAT Supplying and laying refresh Urinal screen mat of standard size for urinal pan of M/s ARNI make or approved etc complete as per specification. Note: 1 set=10pc |
| 60 | SS grating 150 mm sqaure with frameProviding and fixing heavy quality stainless steel / C.P brass grating of approved equvalent make as specified for floor traps / nahani traps all as directed by the Engineer-in-charge |
| 61 | Toilet paper holder Providing and fixing stainless steel toilet paper holder recessed type of approved make and type with S.S screws as directed by the Engineer-in-charge complete. TOILET ROLL HOLDER WITH FLAP AKP-CHR-35753P |
| 62 | Fancy MirrorProviding and fixing 6 mm thick mirrors of required size of approved make with decorative frame edges complete with 6 mm thick asbestos sheet back ground fixed to walls with SS STUDS and concealed washers complete. all as per specifications and as directed by the Engineer-in-charge . |
| 63 | Soap DispenserProviding & fixing approved type heavy duty Euronics Liquid soap Dispenser-ES-04 with S.S brackets, cap etc. fixed to wall with C.P. brass screws, & screwed on to wooden rawl plugs etc. complete. |
| 64 | Aerosol perfume dispenserProviding & fixing approved type Aerosol perfume dispenser polycarbovate ABS casing of Euronics model EA24 Didigtal LED 300MLcapacty with refill can with S.S brackets, cap etc. fixed to wall with C.P. brass screws, & screwed on to wooden rawl plugs etc. complete. |
| 65 | C.P. brass TOWEL RAIL/HookProviding and fixing C.P brass towel rail of approved make 600 mm long or Hook of approved size and pattern complete fixed to walls with 30 mm CP brass screws with concealed fitting arrangement all as directed by the Engineer-in-charge. |
| 66 | C.P. brass / copper inlet connectionProviding and fixing CP brass / copper inlet connection pipes heavy quality suitable for hot and cold including CP brass unions and nuts 15 mm dia 600 mm long |
| 67 | Angle cock Providing and fixing C.P brass Angle cock of heavy quality of specified / approved make, for wash basin inlet / flush cistern etc. as per specifications and as directed by the Engineer-in-charge Providing and Fixing 15 mm CP brass Angle stop cock of approved make- quarter Turn |
| 68 | C.P. brass BIB cockProviding and fixing C.P brass bib cock of heavy quality of specified / approved make as per specifications and as directed by the Engineer-in-charge 15 mm dia bib cock of approved type and make . |
| 69 | Heavy qualilty BIB cockProviding and fixing C.P brass bib cock of heavy quality of specified / approved make as per specifications and as directed by the Engineer-in-charge15 mm dia Exposed part kit of single concealed stop cock consisting of operating level, cartridge sleeve, wall flange & basin spout(compatible with ALD-441) cat no: KUP-CHR-35441 KPM. |
| 70 | 2 in 1 bib cock and Angle cockProviding and fixing 15 mm C.P brass 2 in 1 bib cock and Angle cock combination of Heavy Quality of approved make as per specifications and as directed by the Engineer-in-charge |
| 71 | Pillar cockProviding and fixing 15 mm C.P brass pillar cock of heavy Quality of approved make and specied type as per specifications and as directed by the Engineer-in-charge. |
| 72 | C.P.brass pillar cock elbow operatedProviding and fixing Heavy Quality C.P Brass Pillar cock ELBOW operated of \\"Jaquar \\" make and type as per specifications and as directed by the Project Engineer (Samples to be got approved by the Project Engineer) |
| 73 | CP Brass Bottle trap Providing and fixing heavy quality CP brass bottle trap 31 / 32 mm of approved make single piece moulded with height of 270mm, effective length of tail pipe 260 mm from the centre of the waste coupling 77 mm breadth with 25 mm minimum water seal,of approved make for wash basins / urinal etc all as per specifications and directed by the Engineer in charge. |
| 74 | S.W. gully trap Providing and fixing square mouth S.W. gully trap complete with CI grating brick masonry chamber with water tight CI cover with frame of 300 x 300 mm size (inside) the weight of cover to be not less than 4.5 kg and frame to be not less than 2.70 kg as per standard design150 x 100 mm size gully trap \\"P\\" type |
| 75 | PVC inlet connectionProviding and fixing PVC inlet connection pipes heavy quality suitable for hot and cold including CP brass unions and nuts 15 mm dia 600 mm long |
| 76 | Soap trayProviding & fixing approved type heavy duty Jaquar CP brass Soap tray - recessed type etc. fixed to wall with C.P. brass screws, & screwed on to wooden rawl plugs etc. complete. |
| 77 | Double Pin Cloth HangerProviding and fixing Premium Stainless Steel Double Pin Cloth Hanger of Dimensions: 5x3 cm, Wall Mounted Bathroom Cloth Hanger,Cloth Wall Hook,Door Hooks Rail for Hanging Keys,Clothes,Towel in wash rooms including suitable ss screws and wall grips. |
| 78 | Automatic Hand dryerProviding & fixing approved type heavy duty hi speed Euronics Automatic Hand dryer of S.S. Body of make Euronics adn model PLUTO PHD501 with S.S brackets, cap etc. fixed to wall with C.P. brass screws, & screwed on to wooden rawl plugs etc. complete. |
| 79 | C.I. FRAME & COVERSupplying and fixing Cast Iron Man hole or Cast Iron Steps/ cover / CI Grating of approved make and weight as specified in the drawings or as directed by the Engineer in charge. |
| 80 | Dismantling, shifting and refixing / re-erection of existing metal roofing structure including roofing sheets, trusses, purlins, bracings and all associated structural members of shed roofing area up to 160 SqM at elevation up to 11.00 m, including necessary lifting, scaffolding, tools, tackles, safe stacking within 100 m lead and subsequent refixing with all fittings, fasteners and accessories, complete as directed by Engineer-in-Charge |
| 81 | Dismantling plain cement concreteDismantling plain cement concrete, IPS flooring manually / by mechanical means carefully without damaging adjacent structures including disposal of debris within 200 m lead as per direction of Engineer-in-charge |
| 82 | Demolishing C.C / R.C.C worksDemolishing C.C / R.C.C works by mechanical means and stock piling at designated locations carefully with out damaging adjacent structures and disposal of dismantled materials up to a lead of 100 m, stacking serviceable and unserviceable materials separately including cutting reinforcement bars all as directed at site. |
| 83 | Dismantling brick workDismantling brick work in Cement mortar carefully without damaging adjacent structures including stacking of materials and dispoal of unserviceable materials within 100 m lead as per direction of Engineer-in-charge |
| 84 | Removing of existing bitumen/chemical based waterproofing treatment alongwith synthetic mesh from roof terrace, chajjas, parapets etc, and disposal within 50m etc. complete as per given detailed technical specifications and as directed by Engineer-in-charge |
| 85 | Dismantling brick bat waterproofing'Dismantling unsound portion of brick bat coba cement based water proofing over roof and chajjas carefully without damaging adjacent structures including lowering and stacking of materials and dispoal of unserviceable materials within 200 m lead as per direction of Engineer-in-charge |
| 86 | Dismantling steel workDismantling steel work in built up sections in angles, tees, flats and channels including all gusset plates, bolts, nuts, cutting rivets, welding etc. including dismantling and stacking within 100 m lead |
| 87 | Dismantling partition/False ceiling workDismantling Aluminium / Gypsum partitions, doors, windows, fixed glazing, galvaluma sheet, cement asbestos, Celotax or other hard board ceiling or partiton walls at site including disposal of unserviceable surplaus material and stacking of serviceable materials within 100 m lead as directed by the Engineer-in-charge |
| 88 | Dismantling old plaster / skirtingDismantling old plaster / skirting carefully , raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 100 m lead |
| 89 | Lead chargesLead charges for lead Exceeding 2 KM but not exceeding 3 KM, by mechanical transport including loading, unloading, stacking / levelling etc. All types of metal/wooden scrap materials to BARC’s scrap yard situated at TV stores. |
| 90 | Installation and fixing of 4mm thick aluminium Composite Metal Panel of approved make cladding at different locations including false ceiling, partition wall cladding, soffits of over-hangs but excluding aluminium frame work with grids filled in with weather silicon sealant as per the drawings. False ceiling sheets shall be fixed with stainless steel nut bold of required size as directed by Engineer in charge etc all complete as per approved shop drawings and specification. Only ACMP sheet material will be supplied by department. (Aluminium frame work will be paid under reelevant item) |
| 91 | Installation and fixing of different anodized aluminium section/plates/sheets for false flooring works, doors, windows, ventilators and partitions with extruded built up standard tubular sections / Z sections and other sections of approved make conforming to IS 733 and IS 1285 fixed with rawl plugs and screws or with fixing clips or with expansion hold fastners, nut bolts including necessary filling up of gaps at junctions, at top, bottom and sides with required PVC / neoprene gasket etc. required including cleat angle, aluminium snap beading for glazing / panelling, C.P brass / stainless screws all complete as per drawings and and directions of Engineer-in-charge Making provision for fixing of fittings wherever required including the cost of PVC / neoprene gasket required filling the gaps using silicon grout sealent etc. (fittings glazing and panelling shall be paid for separately). |
| 92 | Fabrication, erection and installation in position all type of structural steel work using angles, channels, joists, MS plates and other sections, welded and / or bolted in built up sections for trusses , structural steel floors, frame works, monorails and other structures including cutting, welding, fabricating, hoisting, fixing in position, applying a priming coat of approved steel primer etc. complete all as per specifications, drawings and as directed by the Engineer in charge. |
| 93 | Labour charges for laying of 3.00 mm thick PVC sheet / tile in flooring Fixing and laying in position 3.00 mm thick Homogeneous PVC sheet / tile in flooring and skirting of supplied pvc sheet in approved pattern on a smooth and damp prrof base using rubber based adhesive of approved quality and manufatrer like Dunlop-S -758, Fevicol SR 998, PolyGrip SP or equivalent including levelling small undulations with plasterof paris if required, rolling with light wooden roller weighing about 5 kg all complete as directed by Engineer-in-charge in approved colour and shade. |
| 94 | Fixing and laying in position 19/20 mm thick cold insulation nitrile rubber sheet for false ceiling etc as per technical specifications. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 19, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 12, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 14 daysNov 17, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 19 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender