Tender For Restoration Of Rain Damages To Lwss Kothuwan Dhalara In Tehsil Sandhole Distt. Mandi Hp (Sh:- Construction of Storage Tank 30 Kl At Saklani Basti) Under Pdna
Tender Value
3.65 Lakhs
Estimated cost
Bid Submission
27 Oct 2026
7 days left
EMD
7320
Bank guarantee accepted
Document Fee
350
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Mandi → Himachal Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Restoration Of Rain Damages To Lwss Kothuwan Dhalara In Tehsil Sandhole Distt. Mandi Hp (Sh:- Construction of Storage Tank 30 Kl At Saklani Basti) Under Pdna
BOQ
| Sl. No. | Item Description |
| 1 | Excavation in earth work and disposal of excavated earth upto a lead 20 mtrs and lift upto 1.50 mtrs, disposal earth to be levelled and neatly dressed in pick/jumper work complete within all lead and lifts as per direction and to the entire satisfaction of Engineer-in-Charge. |
| 2 | Providing and laying cement concrete 1:3:6 (1 cement :3 sand :6 graded stone agg. 40mm nominal size) On curing complete excluding cost of form work in foundation and plinth in all lead and lifts as per direction and to the entire satisfaction of the Engineer-in-Charge. |
| 3 | Foundation and plinth in all leads and lifts as per direction and to the entire satisfaction of Engineer-in-charge. |
| 4 | Providing and laying cement concrete 1 : 1½ : 3 ( 1 cement : 1½ : sand : 3 graded stone aggregate 20mm nominal size) and curing complete excluding cost of form work and reinfocement for reinforced concrete work in : |
| 5 | Foundation footings bases of columns and the like; and mass concreteas per direction and to the entire satisfaction of Engineer-in-Charge. |
| 6 | Walls any thickness but not less than 0.1m thickness including attached pillaster buttresses, plinth and string courses from top of foundation upto two level all floor level as per direction and to the entire satisfaction of Engineer-in-Charge. |
| 7 | Lintels, beams, girders, bressumers and cantilevers upto floor two level within all lead and lifts as per direction and to the entire satisfaction of Engineer-in-Charge. |
| 8 | Arches upto floor two level in all leads and lifts as per direction and to the entiresatisfaction of Engineer-in-charge. |
| 9 | Providing form work with steel plates 3.15mm thick welded with angle iron in frame 30x30x 5mm so as to give a fair finish including centring, shuttering strutting and propping etc. with wooden batten and ballies, in all heights of propping and centring below supporting floor to ceiling not exceeding 4 mtrs and removal of the same for insitu-reinforced concrete and plain concrete work in :- |
| 10 | Flat surfaces such as soffits of suspended floors, roofs, landings and the like floors upto 200mm kin thickness. as per the direction and to the entire satisfaction of Engineer-in-charge upto all lead and lift. |
| 11 | Vertical surfaces such as wall (any thickness) partitions and the like including attached pillasters, buttresses plinth and string courses and the like in all leads and lifts as per direction and to the entire satisfaction of Engineer-in-charge. |
| 12 | Providing form work of ordinary timber plankings so as to give a rough finish including centring, shuttering, strutting & propping etc. height of propping & centring below supporting floor to ceilling not exceeding 4 mts. And removal of the same for insitu-reinforced concrete and plain concrete work in : |
| 13 | Providing laying of Tor steel reinforcement for RCC work including bending binding and placing in position including wire upto all floor level as per direction and to the entire satisfaction of Engineer-in-Charge. |
| 14 | White washing with lime on undecorated wall surface two coats to give an even shade I/c throughly brooming the surface to remove all dirt, dust, mortar, dust and other foreign matter as per direction and to the entire satisfaction of Engineer-in-charge. |
| 15 | Providing and fixing of 3.15mm MS Sheet Manhole cover 600X600mm fixed on all sides with ISA 40x25x5mm top angle iron frame hinged on ISA 35x35x5mm bottom angle iron frame as per drawing. Pieces of MS Flat 20x4mm, 0.15m long be fixed on all sides as hold fast. The operation of manufacturing shall including cutting of MS Sheet, Angle Section & welding of MS Sheets, Angle Section, Hinges, Handles 150mm long, 20x4mm flats, locking arrangement and applying a priming coat of steel primer after pretreatment of surface to the entire satisfaction of the Engineer-in-Charge. |
| 16 | Laying, jointing & testing of G.I pipe of following dia (M/C) for outlets pipe & scour pipes etc. in all leads and lifts as per direction and to the entire satisfaction of Engineer-in-Charge. (Labour rate) |
| 17 | 150mm nominal bore |
| 18 | Providing & fixing sand cast/cast iron spun spigot and socket soil waster and ventilating pipe of approved brand (lead caulked joints to be measured and paid for separately) including all leads and lifts of materials as per BIS specification. |
| 19 | Providing and fixing Cast Iron Cowl 100mm nominal diameter. |
| 20 | Providing and Fixing of double flanged Cast Iron Sluice Vaive of Vir/ Kartar make and of following dia with flange table - 5 Class PN-1.6 capable of with standing the normal sheet pressure as per IS-5312-1984 with up to date amendements compiete in all respect as per the satisfaction of Engineer-in-Charge. |
| 21 | 150mm nominal bore Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 17, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 27, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 7 daysOct 28, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 8 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender