Tender For Repair/Maintenance Of Earthing, Conductor, Lt Panel, Change Over And Lighting Protection Under Aor Of Age (I) Nyoma.
Tender Value
5 Lakhs
Estimated cost
Bid Submission
09 Nov 2026
7 days left
EMD
10000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
nyoma → Jammu And Kashmir
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair/Maintenance Of Earthing, Conductor, Lt Panel, Change Over And Lighting Protection Under Aor Of Age (I) Nyoma.
BOQ
| Sl. No. | Item Description |
| 1 | Removing & refixing of air termination single pointed aluminium rod12mm dia and 300mm long size with necessary fixing arrangement on roof / ceiling after making good, complete all as specified and as directed by Engr-in-Charge. |
| 2 | S & F GI strip of size 32 x 6mm fixed to wall on batten or recess or chases or buried in ground or drawn in conduit / pipe or fixed to poles or any other indicated situation for loop earthing, complete all as specified and as directed by Engr-in-Charge. |
| 3 | Ditto- but using 4 mm dia galvanised or steel wire, complete all as specified and as directed by Engr-in-Charge. |
| 4 | S & F test point terminal block made of phosphorus bronze size 75 x 75 x 25 mm thick drilled and screwed including 3 Nos 8 mm dia 25 mm long hexagonal head screws fixed to copper strip bracket fixed to porcelain insulator in wall as in repairs, complete all as specified and as directed by Engr-in-Charge. |
| 5 | Note :- Porcelain insulator will be measured & paid for separetly |
| 6 | S & F vitreous china porcelain insulator with busbar support white type, complete all as specified and as directed by Engr-in-Charge. |
| 7 | M & L earthing complete for electrical equipments with galvanised steel earth plage electrode 60 cm x 60 cm x 6 mm buried directly in ground vertically to depth not less than 2.24 mtr below ground level with top edge earth plate at a depth not less than 1.5 mtr below ground level, connected to earth lead of GI strip size 32 x 6 mm by means of nuts, bolts, check nuts & washers made of galvanised iron or steel and connected to main switch board or main control board as directed charcoal or coke and salt in alternate layers, necessary excavation and earth work in hard/ dense soil coplete all other accessories as shown on electrical plate No 5 of MES SSR Part I including 50 mm bore light grade GI pipe 1.8 mtr length with top end covered with plug or cap for watering and 30 x 30 x 30 cm size PCC 1 : 3 : 6 block around watering pipe parallel to the existing earth, excluding 20 mm dia watering pipe, PCC, Watering pit, Funnel, Pit cover, complete all as specified and as directed by Engr-in-Charge. |
| 8 | M & L for pole earthing complete with galvanised steel earth plate electrode 60 cm x 60 cm x 6mm buried directly in ground vertically to depth not less than 2.25 mtr below ground level with top edge earth plate at a depth not less than 1.5 mtr below ground level, connected to galvanised earth lead wire 4.0mm dia by means of bolts,nuts, check nuts & washers made of galvanised iron or steel and connected to main switch borad or main control board as directed, charcoal or coke and salt in alternative layers, necessary excavation and earth work in hard / dense soil complete all other accessoreis as shown on electrical plate No 5 of MES Sch Pt I including 50 mm bore light grade 1.8 mtr length with top end covered with plug or cap for watering and 30 x 30 x 30 cm size PCC 1 : 3 : 6 block around watering pipe, excluding 20 mm dia watering pipe, PCC, watering pit, Funnel, Pit cover, complete all as specified and as directed by Engr-in-Charge. |
| 9 | Note for item No 6 & 7 :- (i) GI Strip beyoned 7.5 m will be measured and pad seperately under relevent items of schedule A(ii) The earth chamber shall be constructed 50 cm away from the edge of earth pit and the cost of the same is deemed to be included in the rate quoted for above items.(iii) The rates quoted for item is also deemed to be included for cost of new test point and painting of earth result and date of testing.All as specified and as directed by Engr-in-Charge. |
| 10 | M & L for testing of earthing except new earthing covered under 8 & 9 here in before of various OTM building, Installation and Pole etc in the presence of Enginer-in-charge & maintaining record of test seperately for each type of building/ installation and painting of earth result and date of testing in the wall / earth chamber, complete all as specified and as directed by Engr-in-Charge.Note : - Testing equipements and register shall be provided by the contractor and no extra payment shall be made for the same. |
| 11 | M & L for PCC ( 1 : 2 : 4) type B1, using (20 mm graded stone aggregate ) as in earth chamber as in repairs, complete all as specified and as directed by Engr-in-Charge. |
| 12 | Supply and lay 40 mm dia GI pipe light grade burried in trenches as earth continuity protection as in repairs, complete all as specified and as directed by Engr-in-Charge. |
| 13 | M & L earthing complete with copper earth plate electrode of size 60 cm x 60 cm x 3.15 mm thick burried directly in ground (earth pit not less than 2.25 m deep below ground level) with top edge of the plate not less than 1.5 m below the normal ground level connected with Copper strip 20 x 3 mm by means of bolts, nuts, check nuts & washers of galvanished iron steel including necessary excavation and earth work in any type of soil, removing surplus soil to a distance not exc 50 m, with and including PCC chamber in PCC (1:2:4) , type B1, using (20 mm graded stone aggregate), mild steel angle iron frame made out of MS angle iron of size 40x40x6 mm thick duly painted with two coats of synthetic enamel paint over one coat of red oxide zinc chrome primer hinged with and including 6mm thick CI cover with handle, watering arrangement with funnel internally secured with wire mesh with 20 mm dia medium grade pipe for watering ,40 mm dia light grade GI pipe for lead protection in & including alternate layers of char coal dust and common salt complete all as shown in electrical plate No 5 and connected to earthing test point all as specified and indicated including testing on completion including retrieving old existing earthing, complete all as specified and as directed by Engr-in-Charge. |
| 14 | Repair and maintance of LT out door fedder piller of different capacity and location, complete all as specified and as directed by Engr-in-Charge. (a) Repair abd maintance of broken door by welded or by Change of door and spray two coats of synthetic enamel paint smoke grey colour (1st guality) over a coat of primer. (b) Repair and maintance of Voltmeter and ammeter. (c) Repair and maintance of Busbar of existing capacity and size. (d) Repair and maintance of indicator lamp. (e) Repair and maintance of cable glands, cable lugs, nut, bolts, washers etc. Note- Cost of MCCB and change over required will be paid and masured seperately. |
| 15 | Supply and fixing in replacement of change over switch 4 pole 415 volts 200 Amp in conforming to IS02 with front operated handle complete with fixing in existing LT Panel, complete all as specified and as directed by Engr-in-Charge. |
| 16 | Supply and fixing in replacement of change over switch 4 pole 415 volts 100 Amp in conforming to IS00 with front operated handle complete with fixing in existing LT Panel, complete all as specified and as directed by Engr-in-Charge. |
| 17 | Supply and fixing in replacement of change over switch 4 pole 415 volts 250 Amp in conforming to IS02 with front operated handle complete with fixing in existing LT Panel, complete all as specified and as directed by Engr-in-Charge. |
| 18 | Supply and fix 4 Pole MCCB 200 Amp, 50 Hz, 415 V with adjustable type release and rupturing capacity 36 KA, complete all as specified and as directed by Engr-in-Charge. |
| 19 | Supply and fix 4 Pole MCCB 125 Amp, 50 Hz, 415 V with adjustable release and rupturing capacity 16 KA, complete all as specified and as directed by Engr-in-Charge. |
| 20 | Supply and fix 4 Pole MCCB 63 Amp, 50 Hz, 415 V with adjustable type release and rupturing capacity 16 KA, complete all as specified and as directed by Engr-in-Charge. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 19, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 09, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 7 daysNov 11, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 9 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender