Tender For special Repair Work Of Bldg No T-26 & T-27 (‘A Veh Repair Sheds) Of 6023 (I) Armd Wksp And Other Sanctioned Work At Nams.
Tender Value
41.98 Lakhs
Estimated cost
Bid Submission
07 Nov 2026
5 days left
EMD
83978
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Amritsar → Punjab
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for special Repair Work Of Bldg No T-26 & T-27 (‘A Veh Repair Sheds) Of 6023 (I) Armd Wksp And Other Sanctioned Work At Nams.
BOQ
| Sl. No. | Item Description |
| 1 | Taking down cement plaster on brick/stone/concrete walls /ceiling incl racking out joints etc,hacking for key, scrubing down with water etc & dispose off debris as per directed complete all as specified and directed.note -rate applicable upto four storey height incling all scaffolding work |
| 2 | M&L for rendering 15 mm thick on fair faces of brick work or concrete surfaces on walls in CM 1:4. finishing even and fair complete all as specified and directed. (WPC shall be measuared seperatly and paid @ 200ML for 50kg cement bags or as per manufacturer's instructions). note -rate applicable upto four storey height incling all scaffolding work |
| 3 | Demolition of brickwork, built in cement mortar including all quoins, arches, pillars, etc. complete all as specified and directed. |
| 4 | M&L for brick work with sub class \\"B\\" bricks (old size) straight or curved on plan exc 6 m mean radius, built in CM 1:6 complete all as specified and directed |
| 5 | Ditto all as per above but except bricks complete all as specified and as directed |
| 6 | M&L preparation of new plastered surface applying a coat of primer and two coat of Acrylic emulsion paint complete all as specified and directed |
| 7 | Dismantling of plain or corrugated steel sheeting,any gauge,thickness,incl nainital or similsr pattern roof covering including ridges etc complete all as specified and directed. |
| 8 | S & F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.47to 0 .50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering including ridges /cladding to wall,fixed with self tapping screws as specified and directed. |
| 9 | S & F Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.47 to 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering including ridges /cladding to wall,fixed with self tapping screws as specified and directed. |
| 10 | M&L for preparing old steel surfaces of any description, not otherwise described over 10 cm width or girth and applying one coats of synthetic enamel paint complete all as specified and as directed. |
| 11 | Demolition of cement concrete (unreinforced) in ground floors and paving n exc. 15cm thickness (below or above ground level) complete all as specified and directed |
| 12 | M&L for PCC 1:4:8 type D-2 (using 40mm graded stone aggregate ) as in subase finished to receive floor treatment etc complete all as directed. |
| 13 | S&L machine pressed precast concrete interlocking paver block rubber moulded, any shape and size confirming ti IS-15658-2006 of 60mm thickness , M-35 grade .complete all as specified and as directed |
| 14 | M&L for 30mm thick sand bedding layer for concrete paver tiles laid to true line, level watered and mechanically compacted etc complete all as directed. |
| 15 | Providing cement concrete Type B0 1:2:4 (12.50mm aggregate) in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs not provided for in Item 04028, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, as directed |
| 16 | Taking down Chowkats or frames from the opening of size not exceeding 1.5 sqm each with shutters ( without taking off shutters from the frames) complete all as specified and directed |
| 17 | S&F powder coated aluminium frame for doors ,windows, ventilators with one or more rebates including joining cleats for fixing complete all as specified and directed by Engineer-In-Charge.( Min. thickness of powder coating 50 micron) |
| 18 | S&F aluminium powder coated shutter (for doors) wighing 0.55 kg/m including necessary jointing cleats, glazing clips, neoprene rubber beading with neoprene packing anodized handle 2 no in each, locking arrangement(mortised) and aluminuium anodised tower bolt 200 mm long aluminium snap beading screws complete all as specified. |
| 19 | S&F factory made 100 % solid wood plastic composite (WPC) flush type shutter of 18mm thickness one side laminate consisting of panel of PVC profile of 18mm (+ 0.7mm) thick of denisity 600 kg per cum manufactured by ISO-9000 certified company using for shutter cillicia ply 18mm thick and fixed with frame. The thickness of shutter is edges painted by matching colour of PVC lining of plain/prelim coloured PVC sheet using etc complete as per manufacture specification. |
| 20 | S&F Sheet glass, 5.5mm thick ordinary quality, in squares,exceeding 0.50 sqm in each pane including rubber packing and aluminium beading with and incl solar control film 25 Micron reflective type sticked to glass panes as per instructions of manufacturer complete all as specified and directed |
| 21 | Demolition wall and ceiling boards (fibre, pulp, insulation, etc) or insulation boards / slabs / blankets, any thickness, including cover fillets all as specified and directed. |
| 22 | S&F anodised/powder coated aluminum alloy interlocking snap grid 600mm x 600mm consists of Min Tee runners of size 38mm x 25mm x 1.5mm and cross Tee of size 25mm x 25mm x 1.5mm, spaced between the main Tee at 600mm centre to centre to form a grid of 600mm x 600mm and wall angle 25mm x 25mm x 2mm fixed to wall perimetrs at 450mm centres and shall confirm to IS 733, IS 1285 with and including hangers of 4 mm dia. G.I. (upto 1200mm length and 1200mm centres) adjusting level fixed to roof steel members by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long etc complete all as specified and directed.M & L for 4mm thick non asbestos fibre cement building dasign boards fixed or laid/ inserted to timber/GI/Aluminium framework with screws fixed in ceiling flat or sloping complete all as specified and direced. |
| 23 | Dismantling wrought iron or mild steel work of any description not otherwise provided for and fixed in any position etc complete all as specified and as directed |
| 24 | S&F for Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240 complete all as directed. |
| 25 | M&L for painting with two coats of synthetic enamel paint to steel surfaces of any description over 10cm width or girth on untreated steel surfaces over a coat of red oxide primer after preparation of surfaces complete all as specified and directed. |
| 26 | S&F PVC door frame size 50mm x 47mm made out of 5mm plain coloured PVC sheet reinf with MS square tube supplying & fixing in opening as per specificationn complete all as specified and as directed |
| 27 | S&F factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent ement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, all as per manufacturer's instruction complete all as specified all as specified. |
| 28 | M&L for brick work using sub class ‘B’ bricks, straight or curved on plan to any radius in half brick thick walls, built in cement mortar 1:4 complete all as specified and directed. |
| 29 | M&L for 110mm bore of pipe PCC 1:4:8 type D-2 concrete bed to drain pipes including packing under and hauching against the sides of pipes after they are laid complete all as specified. |
| 30 | S&F 110mm bore PVC (SWR) junction single (Single T) equal or unequal complete all as specified and directed. |
| 31 | M&L for 110mm bore PVC Gully Trap setting / jointed with solvent cement complete all as specified and directed. . |
| 32 | S&F PVC(SWR) vent cowl 110mm dia complete all as specified and directed. |
| 33 | S & F 75mm bore PVC (SWR) junction single, (Single T) equal or unequal with oval access door complete all as specified and directed |
| 34 | M & L for rolled mild steel work angle iron as in door frame/ cooler stand / water tank stand and other similar work confirming to Fe-290 or Fe-330 including complete all as specified and directed. |
| 35 | Taking down chowkhats or frames with shutters (without taking off shutters from the frames) exc 1.50 sqm and n.exc 4.00 Sqm each and removing from site complete and making good disturbed surfaces of wall in CM (1:3) all as specified and directed. |
| 36 | M&L 35mm thick factory made solid PVC (Wood plastic composite ) moulded gauged door shutter with wire mesh 0.18mm nominal dia of wire and average width of aperture 1.40mm in any number of division with brown wood grain texture , including S.S wire mesh shall be fixed with 15x15 square tubes in is rails with screwing 8x28mm heat metal Zink coated screws can be remove or fix again after changing of wire mesh when needed . The density shall be as per manufactures instructions complete all as specified and complete all as specified and directed |
| 37 | M&L Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 35mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of EngineerIn- Charge. (Note: stainless steel butt hinges and necessary S.S screws shall be paid separately |
| 38 | S & F Factory made single extruded WPC (Wood Polymer Composite) solid door frames/ Chowkhat of size50x100 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant including making good after complete all as speicifed and directed |
| 39 | Material & labour for box type steel window 1.25 mm thick made of ERW tube P-Section of size 60 x 25 mm double rebated outer frame comprise of glazed skeleton shutter(two gauged shutters and two glazed shutter) of ERW tube P-Section size 50 x 20 mm and 1mm thick one/two Nos openable leaf consisting of two Nos sash bar of T-Section 20x3mm welded to frame with one No Vertical mullion of ERW box type T-Section of size 60 x 25 mm and 1.25 mm thick and FI 2 mm thick welded / screwed to frame for fixing of glass including fittings and fixture like Handle, Tower Bolt, stopper, cleat, pintal hinges, hold fast etc including provn of cooler/AC opening etc. (a) Hold Fast, 150mm long of 120mm x 3 mm made to shape -04 Nos per window. (b) Handle of Z sec 20mm x 25mm, 100 mm long -1 No per leaf (c) MS Tower bolt 150mm long - 2 No per leaf (d) Z Sec 20mm x 25 mm, 100 mm long stopper - 1 No per leaf (e) Cleat 55 mm long of hollow square 15mm x 20mm x.63mm welded to hinge -1 No per leaf. (f) MS Pintal hinges of size 75mm x 12mm - 2 Nos per leaf(g) 12 mm square guard bar, 10 cm centre to centre.(h) 25x4 mm flat iron all around for joint of both frame.(j) One shop coat of red oxide primer and two coats of Synthetic enamel paint to MS window and guard barNote:(i) Including taking down old steel window/ ventilator and making good dismantled portion with PCC 1:2:4 type B0 including hold fast PCC (four No’s for Each window) & around required plaster in CM 1:4 and match with existing finishing complete all as specified and directed by Engineer-in-charge.(ii) sheet glass and wire mesh shall be measured and paid separately) |
| 40 | S&F Sheet glass, 3mm thick ordinary quality, in squares, not exceeding 0.50 sqm in each pane fix with oil putty complete all as specified and directed. (Note upto four storey height including all scaffolding work ) |
| 41 | S&F GI wire cloth, 0.36 mm nominal dia. of wire and average width of aperture 1.4 mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and directed |
| 42 | S&F Stainles steel but hinges 100mm long medium weight fixed complete all as specified and directed |
| 43 | S&F aluminium, anodised, barrel tower bolt of extruded section, ISI marked, 150 mm long complete all as specified and directed. |
| 44 | S & F aluminium handle fabricated type, anodised 150mm size conforming to IS complete all as specified and directed. |
| 45 | S&F aluminum alloy anodised sliding door bolts with hasp & staple & fixing clips of sheet cast extruded section & fixing bolts & sliding bolts of extruded section 300 mm long. complete all as specified and as directed |
| 46 | S&F in repair, 600mm x 400mm plain edge mirror of selected quality glass not less than 5mm thick, mounted on wall complete all as specified and directed |
| 47 | M&L for 15 mm thick rendering in cement mortar (1:6) on fair face of brick or concrete surface finished even and fair (without using extra cement)all as specified and directed. |
| 48 | M&L, rendering 10mm thick in CM 1:3 over concrete surface as on ceiling finish even and smooth w/o using extra cement (without using extra cement) , complete all as specified and directed. |
| 49 | M&L preparation of new plastered surface applying 1mm thickness putty and two coat of oil bound distemper complete all as specified and directed |
| 50 | M&L preparation of new plastered surface applying a coat of primer and two coat of cement base paint complete all as specified and directed |
| 51 | M&L Prepration of new plastered surface and applying 3 coat of white wash on ceiling complete all as specified and directed |
| 52 | Dismantling floor, hearth or wall tiles, including cement mortar, removing serviceable tiles from site & rubbish off the premises, complete all as specified and directed. |
| 53 | M&L Non skid ceramic coloured tiles 7 to 8 mm thick (Square/rectangular) area of each tile exceeding 0. 11 sqm but not exceeding 0.18 sqm, in floors etc. laid over 15mm thick screed bed in cement mortar 1:6 and jointed in neat cement slurry and pointed in white or coloured cement to match etc complete all as specified and directed. |
| 54 | M&L Non skid ceramic coloured tiles 7 to 8 mm thick (Square/rectangular) area of each tile exceeding 0. 11 sqm but not exceeding 0.18 sqm, in skirting/ddado etc.including rendering 10 mm thick in cement mortar 1:4 and jointed in neat cement slurry and pointed in white or coloured cement to match etc complete all as specified and directed. |
| 55 | M&L for Glazed ceramic coloured tiles of size 300mm x 450 mm x 7mm thick including providing highlighter/ any pattern on vertical surface such as skirting, dados, risers to steps etc set & jointed in neat cement slurry and pointed in white or white cement cement mixed with colour pigments to match the shade of tiles including rendering 10mm thick in cement mortar (1:4) complete all as specified and directed. |
| 56 | Material and labour for 25 mm thick cement concrete (1:2:4), type B-0, using 12.50 mm graded aggregate as in floors including finishing the surface rough & even for receiving kota/tiles complete all as specified and directed. |
| 57 | Dismantling and taking down water storage tanks exc 500 Ltr but not exc 1000 Ltr capaciaty and S&F 1000 ltrs capacity rotatonal moulded polyethylene water storage tanks Triple layer in white colour (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I including S&F of ball brass valve high pressure of 20mm dia all as specified |
| 58 | S&F in repair Bib tap CP fancy type/long body 15 mm bore with will crutch or buttewrfly handle screwed down screwed to iron pipe complete with all fittings all as specified and directed. |
| 59 | S&F in repair 15mm bore Stop valves, cast copper alloy, screwed down , high pressure, with crutch or butterfly handles , screwed both ends for iron pipe or for unions, fancy type, chromium plated with long shank and cup ( concealed type) and fixed. complete all as specified and as directed |
| 60 | S&F in repair Angle cock CP fancy type 15 mm bore screwed down high pressure with crutch or butterfly handle & screw both end for iron pipe or for Unions complete all as specified and directed. |
| 61 | S&F in repair brass chromium plated shower rose with Arm length not less than 150mm swivel joints size 125mm with arm fixing to steel pipe or union complete all as specified & directed |
| 62 | S&F in repair tubular towel rail 600mm long, 20mm dia 'D' type CP rail with fixed in wall complete all as directed |
| 63 | S&F in repair Pillar tap CP fancy type/long body 15 mm bore with will crutch or buttewrfly handle screwed down screwed to iron pipe complete with all fittings all as specified and directed. |
| 64 | S&F in repair 10 ltr capacity low levels flushing cistern with PVC bend and PVC flush down pipe etc complete all as specified and directed. |
| 65 | S&F in repair for viterous china squating pan of (Orrissa Pattern) size 580 x 440 white with 'P' or 'S' trap front or back inlet and integral foot rest , including joining, filling and provision of cement concrete bedding 1:5:10, type E2 (excluding flushing cisteern and flush pipe) fixed incl cement concrete bedding as required set complete all as specified and directed. |
| 66 | S&F in repair vitreous China wash basin white,flat back size550x400mm including CP waste coupling 32mm bore, bracket for fixing etc complete all as specified. |
| 67 | S&F in repairs Vitreous China urinals, half stall type (back or corner wall type), complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; including fixing Brass chromium plated bottle traps 32mm bore for urinal with inlet and outlet screwed for pipe or connections including necessary packing, union fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe. etc complete all as specified and directed. |
| 68 | S&F PVC connections 15mm size with PTMT nuts of length 450mm complete all as specified and directed. |
| 69 | S&F PVC waste pipe 32mm bore including socket complete all as specified and directed. |
| 70 | S&F in repair mild steel powder coated curtain rods 20mm dia of approved quality incl bracket, knobs etc complete all as specified as directed. |
| 71 | Taking up or down steel tubing and connection removing the same from site/keeping aside for reuse of following size :- |
| 72 | 15 mm bore pipe |
| 73 | 20mm bore pipe |
| 74 | S&F GI tubing medium grade including all fittings fixed to walls and ceilings or laid in floors at as specified and directed of following sizes :- |
| 75 | 15 mm bore pipe |
| 76 | 20mm bore pipe |
| 77 | Dismantling of Brick tiles or terracing tiles, single layer on roofs |
| 78 | Demolation of Mud in roof including plastering and leeping (whether full thickness removed or only a part thereof including plastering and leeping (whether full thickness removed or only a part thereof |
| 79 | M & L for 50mm avarage thickness PCC 1:2:4 type B1 (using 20 mm graded stone aggregate as roof padding ,hunching, sub base floor, even and smooth without using extra cement for further treatment complete all as specified and directed. |
| 80 | M&L for preparation of roof surface & applying evenly a tack coat of industrial bitumen primer 85/25 grade @ 1.2 Kg/Sqm including APP based polymeric membrane minimum weighing 3 kg/sqm and minimum 3 mm thick reinforced wih polyster non wove fabric (wt not less than 150 gms/sqm) applied on primed surface by forced application of heat and roller, joints to be touched hot and width of overlaps not be less than 150 mm complete all as specified and directed. |
| 81 | Material and labour for 40 mm thick brick tiles laid over and including 25 mm screed bead in CM 1:4 and joints grouted flush in CM 1:3 mixed with 5% of crued oil by weight of cement, complete all as specified and directed. |
| 82 | All as per above item but except tiles. complete all as specified and as directed |
| 83 | S&F PVC (SWR) bend 110 mm with access door complete all as specified and directed. |
| 84 | S&F in repair 110mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints laid in trenches or in floors and wall complete all as specified and directed. |
| 85 | M&L for PVC(SWR) floor trap, plain with grating including jointing with solvent cement, dia of outlet 75mm complete all as specified and directed. |
| 86 | S&F in repairs 75mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed. |
| 87 | S & F 75mm bore PVC(SWR) bends with oval access door of any radius complete all as specified and directed. |
| 88 | M&L PCC (1:3:6) type C-1 using 20mm graded stone aggregate, 75 mm thick as in plinth protection finished fair & even in alternative bays n. exc 2M in length and joints filled with butmen mastic 1:3 (1 Bitumen : 3 Sand) complete all as specified and directed. |
| 89 | Taking down aluminium/copper point wiring from existing conduit / batten (light, fan, socket or power) complete such as switches, ceiling rose, pendent, regulators, socket, light fittings etc and removing material from site and making good the disturbed surface of wall / floor etc, complete all as specified and directed Please Enable Macros to View BoQ information |
| 90 | Taking down aluminium/copper point wiring from existing conduit / batten (light, fan, socket or power) complete such as switches, ceiling rose, pendent, regulators, socket, light fittings etc and removing material from site and making good the disturbed surface of wall / floor etc, complete all as specified and directed Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 17, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 07, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 5 daysNov 10, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 8 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender