Tender For Provn Of Chain Link Fencing Along With Concertina Coil And Interlocking Tiles Hardstanding Near Lpg Agency At Chandimandir Mil Stn
Tender Value
43.67 Lakhs
Estimated cost
Bid Submission
07 Nov 2026
12 days left
EMD
87400
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Panchkula → Haryana
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Provn Of Chain Link Fencing Along With Concertina Coil And Interlocking Tiles Hardstanding Near Lpg Agency At Chandimandir Mil Stn
BOQ
| Sl. No. | Item Description |
| 1 | S & F rolled mild steel in posts & struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe 410-0 or Fe 310-0 complete all as specified and directed. |
| 2 | Excavation in post holes (or similar holes) in soft/loose soil each n.exc 0.5 Cum & getting out returning, filling in and ramming earth or broken rubble mixed with earth around, in layers n.exc. 25 Cm watering & removing surplus spoil to a distance n.exe 50 mtr complete all as specified and directed. |
| 3 | S&F mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, 5 to 10mm dia exc 5cm but n.exc 10cm long etc complete all as directed. |
| 4 | M&L applying two coats of synthetic enamel paint over a coat of red oxide primer on new steel surfaces of any description over 10 cm width or girth incl preparation of surface etc., complete all as specified & directed by Engineer-in-Charge. |
| 5 | Supply only mild steel galvanised chain link fencing of 4 mm thick GI wire & mesh size 50x50 mm of approved quality complete all as directed. |
| 6 | Fixing only chain link fencing wire mesh of any size and any type to any type of standard rails, straining bolt etc incl provision of line wires and binding wire complete all as specified and directed |
| 7 | S&F MS round bars 10 mm dia conforming to IS-432 Gde-I fixed independently including hooking ends for fixing chain link fencing as in bearing bars, complete all as specified. |
| 8 | S&F for Galvanised. 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. (each line wire to be measured) complete all as specified. |
| 9 | S&F of concertina coil in patches fencing with punched tape concertina coil 600mm dia as specified ,fixed withangle iron Y shaped angle iron placed on boundary wall etc. with barbed wire ,stud tied with GI staples and GI clips to retain horizontal including necessary bolts or GI bared wire tied to angle iron all complete as per directions of Engr in Charge with reinforced barbed tape (RBT)/spring core(2.5 mm thick)wire of high tensile strength of 165 kg /sq mm with tape(0.52 mm thick)and weight 43.478gm/m. Note : Barbed wire will be measured & paid separately as supply and fix in this BoQ |
| 10 | M&L PCC (1:3:6) type C-2 in foundations, filling and mass concrete using 40mm graded crushed stone aggregate as in embedding angles benching and coping etc with & including necessary formwork for fair faces of concrete, complete all as specified & directed. |
| 11 | S & F framed work such as grills, grating, etc., with ends of bars shouldered and / or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; frame work for water tanks and similar work conforming to Fe-290 Gde E-165 all as specified and directed by Engineer - in - Charge. |
| 12 | M & L 18mm Granite (of any type) work (table rubbed and polished) for wall lining/Skirting (veneering to wall) 10mm thick in cement mortar (1:3) and pointing with white cement (1:2) using marble dust with admixture of pigment to match with shade of granite all as specified and directed. |
| 13 | Excavation in trenches not exceeding 1.5m wide and not exceeding 1.5m depth for foundation etc in soft/loose soil complete all as specified & directed by Engineer- in-charge. |
| 14 | Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out in soft / loose soil etc complete all as directed. |
| 15 | Removing excavated material exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point Specifierded and directed. |
| 16 | M & L for broken stone or boulders hardcore of gauge n exc. 63mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified & directed by Engineer- in-charge. |
| 17 | PCC 1:4:8 type D-2 using 40mm graded crushed stone aggregate as in foundation ,mass concrete etc.complete all as specified & directed by Engineer- in-charge. |
| 18 | M & L for providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete all as specified and directed. |
| 19 | M & L for prepration of new concrete surface of any description exceeding 10cm width or girth and applying two coats of synthetic enamelled paint over water proof primer complete all as specified and directed. (Note: Pattern/Colour of painting to be decided and approved by AGE) |
| 20 | Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks,lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method usingPU mould, laid in required colour & pattern over and including 50mm thick compactedbed of fine sand, compacting and proper embedding/ laying of inter locking paverblocks into the sand bedding layer through vibratory compaction by using platevibrator, filling the joints with sand and cutting of paver blocks as per required sizeand pattern, finishing and sweeping extra sand complete all as specified. |
| 21 | Earth work in excavation by mechanical means (Hydraulic excavator) means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5m, as directed by Engineer-in-charge |
| 22 | Supply and mixing properly manure/cowdung with excavated earth to make mixture of earth and manure to a ratio of 2:1 forming a top layer min 150 mm and surface dressing the area to true level and required slope for grass plantation or to make plant/flower beds complete all as specified and directed Please Enable Macros to View BoQ information |
| 23 | Supply and mixing properly manure/cowdung with excavated earth to make mixture of earth and manure to a ratio of 2:1 forming a top layer min 150 mm and surface dressing the area to true level and required slope for grass plantation or to make plant/flower beds complete all as specified and directed Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 17, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 07, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 12 daysNov 11, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 16 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender