Tender For Addn/ Altn In The Old Operation Theatre Complex (Rewiring Roof Treatment, Retiling, Replastering, Expansion) Bi-44 At Rvc C&C Under Ge (North) Meerut Cantt
Tender Value
Ref. Documents
Estimated cost
Bid Submission
09 Nov 2026
7 days left
EMD
73820
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Meerut → Uttar Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Addn/ Altn In The Old Operation Theatre Complex (Rewiring Roof Treatment, Retiling, Replastering, Expansion) Bi-44 At Rvc C&C Under Ge (North) Meerut Cantt
BOQ
| Sl. No. | Item Description |
| 1 | Demolition of cement concrete in ground floor and pavings n'exc 15cm thick below or above ground level complete all as specified and as directed. |
| 2 | M & L for 75 mm PCC 1:2:4 type B-2 using 20mm graded aggregate as plinth protection finished even and smooth with out using extra cement complete all as specified and as directed. |
| 3 | M&L Forming Contraction (Dummy) joints 65 mm deep x 10mm wide, filled with sealing compound Grade 'A' in plinth protection complete all as specified and as directed. |
| 4 | Taking down cement plaster on brick or concrete surfaces including racking out joints hacking for key, scrubbing down with water etc. complete all as specified and as directed. |
| 5 | M&L for 15mm thick rendering on other than fair faces of brick works finished even and smooth without using extra cement in cement mortar 1:6 complete all as specified and as directed. |
| 6 | M&L for 15mm thick rendering on fair faces of brick works finished even and smooth without using extra cement in cement mortar 1: 4 complete all as specified and as directed. |
| 7 | M&L for 5mm thick rendering on ceiling finished even and smooth without using extra cement in cement mortar 1:3 complete all as specified and as directed. |
| 8 | M & L three coat of white wash on newly plastered surfaces of ceiling incl preperation complete all as specified & directed. |
| 9 | M & L two coats of white wash on old surfaces incl preperation complete all as specified and as directed |
| 10 | M&L for Preparation of new plastered surface of wall applying 3mm thick wall care putty and making the surface smooth and applyingand applying two coats of weather proof exterior emulsion over a coat of primer complete all as specified and directed. |
| 11 | M & L Preparing newly plastered surfaces and applying two coats of distemper oil emulsion including priming plastered and other surfaces with alkali resistant priming paint on surfaces of walls. complete all as specified and as directed. |
| 12 | M&L for preperation of old concrete /plastered / stone wall surface of any description and applying two coat of exterior emulsion paint (weather coat) complete all as specified and as directed. |
| 13 | M&L for preperation of old plastered wall surface of any description and applying two coat of Oil bound destemper complete all as specified and as directed. |
| 14 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable to store and rubbish off the premises complete all as specified and directed. |
| 15 | S&F Non-skid coloured ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11Sqm but not exceeding 0.18Sqm as in floors etc. set and jointed in neat cement slurry and pointed in coloured cement to match the coloured tiles laid over and including 15mm thick screed bed or bedding layer CM 1:6 for laying floor finishes complete all as specified and directed. |
| 16 | S&F vitrified ceramic tiles light shade 10 mm thick (square/rectangular) polished, area of each tile exceeding 0.42 Sqm but not exceeding 1.00 Sqm as in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match tiles laid over and including 10mm thick screed bed or bedding layer CM 1:6 for laying floor finishes complete all as specified and directed. |
| 17 | S&F coloured Glazed ceramic tiles in vertical surfaces (600x300x7mm) set and jointed in neat cement slurry and pointed in white or coloured cement to match as in vertical surfaces including 10mm thick back coat in CM 1:4 complete all as specified and directed. |
| 18 | Demolition of brick work / stone masonry built in cement mortar complete all as specified and directed. |
| 19 | M&L brick work with fly ash old size bricks, straight or curved on plan exceeding 6 cm mean radius built in cement mortar 1:6 complete all as specified and as directed. |
| 20 | All as described item ser No 19 here-in-before but except bricks any types but curved on plan to any radius complete all as specified and directed. |
| 21 | Taking down chowkats / frames with shutters (without taking off shutters from the frames) area n'exc 1.5 Sqm each complete all as directed. |
| 22 | Taking down chowkats or frames with shutters (without taking off shutters from the frames) area exceeding 1.5 Sqm and not exceeding 4 Sqm each complete all as directed. |
| 23 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/ borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as specified and as directed. (Note: stainless steel butt hinges and necessary S S crews shall be paid separately) |
| 24 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 45 x 70 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. |
| 25 | S&F Powder coated (minimum thickness of powder coating 50 micron) anodised aluminium frames for door, windows, ventilators and partitions with one or more rebates including joining cleat for fixinf etc complete all as specified. |
| 26 | Supply and fixing factory made uPVC white colour Three track three panels sliding window with fly proof S.S wire mesh (Two nos. glazed & one no. wire mesh panels) upto 1.50m height made of (big series) frame 116 x 45 mm & sash 46 x 62 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead /double glazing bead of appropriate dimension. (Area of window above 1.75 sqm) comprising of uPVC multichambered frame, with inbuilt roller track and sashe xtruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & sizeaccording to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, complete all as specified anddirected by Engineer-in-Charge. (Glass or wiremesh shall be paid separately) Note: For uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made |
| 27 | S&F Powder coated (Thickness or powder coating not less than 50 micron) anodised aluminium door shutters of aluminium sectioin weighing 0.55kg/m (minimum) including necessory joining cleats ,glazing clips, rubber neoprene packing, handles 2 Nos in each door, stainless steel hinges, sliding door bolts, tower bolts and anodised aluminum snap beading screws etc. complete all as specified and directed |
| 28 | S&F 4.8mm thick sheet glass, ordinary quality and glazing with beading in square n exc 0.5 sqm in each pane complete all as specified and directed. |
| 29 | S&F 150mm long aluminium anodized, barrel tower bolt of extruded section complete all as specified and as directed. |
| 30 | S&F 100mm long aluminium anodized, barrel tower bolt of extruded section complete. |
| 31 | S&F 150mm size extruded aluminium alloy handles, fabricated type, anodized complete all as specified and as directed. |
| 32 | S&F in repair door closer hydraulically aluminium (extruded section body) designation No 3, universal type suitable for door shutter of 851 to 1000 mm in width and of weight between 61 to 80 kgcomplete all as specified and directed |
| 33 | S&F in repairs 25mm bore stop cock chromium plated screw down under high pressure with crutch or butter fly handle screwed both ends for iron pipe or brass ferrule. complete all as specified and as directed. |
| 34 | S & F in repairs fancy type 15mm bore chromium plated bib taps, cast copper alloy, with crutch or butterfy handle, screwed down, screwed for iron pipe or for brass ferrule. complete all as specified and as directed. |
| 35 | Taking up or down steel tubing and connection 15mm bore pipe complete all as specified and as directed. |
| 36 | Supplying and laying of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings 20mm dia on walls/ceiling or laying in floors complete all as specified. |
| 37 | S & F in repairs, PVC (SWR) 75mm dia, floor trap, plain with grating including jointing to waste pipe with solvent cement complete all as spd & directed. |
| 38 | S&F in repair Rotational moulded polythene water storage tanks (Cylinderical vertical with closed top) hoisted and fixed in position 500 ltrs, including 20 mm bore Ball PTMT valve, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed and dismantling of old water tank complete all as specified and directed. |
| 39 | S&F PVC connectons 15 size with PTMT nuts (length 600mm). complete all as specified and as directed. |
| 40 | S&F in repair 600x450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial ply wood and fixed to wooden plugs with cromium plated brass screws and cup washers complete all as specified. |
| 41 | S&F in repair 1200mmx450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial ply wood and fixed to wooden plugs with cromium plated brass screws and cup washers complete all as specified. |
| 42 | S&F roller blind curtain for window, sun and UV protection, air flow design, including all acessories make : HIPPO complete all as specified and as directed. |
| 43 | S&F in repairs Soap dish, fixed to plugs with cromum plated brass screws. complete all as specified and as directed. |
| 44 | S&F in repairsTowel rail 600mm long of ptmt fixed and including chromium plated brass screw Cromum plated (Minimum weight 190 gms). complete all as specified and as directed. |
| 45 | S & F wall mounted WC of bowl size 540mm x 360mm x 340mm, bowl opening (337 x274)mm, bowl mounting holes 160mm, P trap, high glaze, water saving Eco flush, safeshield anti bacterial protection including PVC fitting P or S trap for 100mm bore of pipe fixed complete all as specified and directed. |
| 46 | S & F in repair Vitreous China urinals, half stall type (back or corner wall type), complete including providingand fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets,flush pipe, grating and Union for discharge pipe. (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe complete all as specified and as directed. |
| 47 | S & F in repair sink with drain board made of Stainless steel 1mm thick kitchen or laboratory with plugs, washers and waste including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe over all size 495mm x 420mm bowl size 410mm x 330mm x 160mm complete all as specified and directed. |
| 48 | Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (horizontal or sloping) rough finished surfaces of concrete flat complete all as specified & directed. |
| 49 | M & L M-25 (20mm graded aggregates) for slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified & directed. |
| 50 | M&L form work to fair finshed edges of concreat flats, treads breaks in floors, window cills, concrete failings, openings in concrete walls, floor and roofs n.exe 20 cm wide and sides of RCC/PCC bands in walls, horizontal or sloping and similar work exc 10cm but n exc 20 cm wide. complete all as specified and as directed. |
| 51 | M & L for TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed. |
| 52 | M & L 20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and as directed. |
| 53 | M&L 18/19mm thickBlock boards, grade 2 quality, i n t e r i o r grade, commercial type, fixed with screws to timber frame-work complete all as specified and as directed. |
| 54 | M&L sunmica sheet, 1mm thick complete all as specified and as directed |
| 55 | S&F Brass knobs 35-40mm dia. complete all as specified and as directed. |
| 56 | S&F auto closing hinges 35 mm of 0 crank( KH-001) or 8 crank (KH-002) openable at 110 degree for cabinet shutters complete in all respect and fixed in position all as specified. |
| 57 | S&F tower bolts 250mm long of stainless steel 304 finished/of outer plate metal matt finished complete fixed in position all as specified. |
| 58 | S&F D-type cabinet handles premium quality, stainless steel 304/gloss chrome/SN finished 200mm long matt finished complete fixed in position all as specified. |
| 59 | S & F vanity washbasin cabinet size 800 x 460 complete with all acessories fixed complete all as specified and directed. |
| 60 | S & F in repairs 750 mm long, 32/ 40 mm dia., PVC plain Waste pipe complete all as specified and directed. |
| 61 | S & F in repairs, 40mm waste coupling of CP brass complete all as specified and directed (Half or full threaded ). |
| 62 | Dismantling of wall and ceiling board (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets complete all as specified and as directed. |
| 63 | S & F anodised aluminium snap grid of size 605 x 605 frame work of false ceiling including hanger 6mm dia GI (up to 1200 mm length) adjusting level fixed to roof slabs by means of ceiling clearts made out of GI flat 40 x 3 mm size 60mm long and expansion hold fasterners 12.5 mm dia 40mm long complete all as specified and directed. |
| 64 | M & L providing and fixing Gypsum board 12mm thick and 600 x 600 mm in size in ceiling fixed with screw or with staples on snap grid as per manufactured instructions complete all as specified and directed. |
| 65 | Demolition of bricks (laid flat or on edge) or interlocking tiles in floors, channels, kerbes, aprons, etc laid dry of laid dry and pointed. |
| 66 | M&L for Cement concrete type D-2,1:4:8 (40mm graded aggreate) 75 mm thick as in sub -floors ,sub- bases ,floors and pavings,etc.. |
| 67 | M&L machine pressed precast concrete interlocking paver block any shape and size polished with grey cement and pigment confirming to IS 15658-2006 of 60 mm thickiness M-35 grade complete all as specified and as directed. |
| 68 | Dismantling of manglore pattern or similar tiles in roofing complete all as specified and directed. |
| 69 | S&F Pre-painted galvalume aluminium zink coating GI based corrugated steel sheet(AZ-150) 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/ Clading to wall, fixed with self tapping screws as specified complete all as specified and directed. |
| 70 | S&F Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm of any colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified |
| 71 | M & L Cutting out cracks to V section in existing roofs or terracing ,cleaning out ,wetting, grouting with cement and sand slurry 1:3, complete all as specified and as directed . |
| 72 | M&L for brushing neat cement slurry with 3.0 Kg of cement per Sq.meter complete all as specified and as directed. |
| 73 | M&L 25 mm thick PCC 1:2:4, type B0 (using 12.5mm graded stone aggregate) as in roof padding complete all as directed. |
| 74 | M&L for 20 mm thick bedding layer in CM 1: 4 with wpc 0.20 ltr/50kg of cement bag complete all as specified and as directe. complete all as specified and as directed by Engr-in-Charge. Note:- Wpc item will be paid seprately |
| 75 | Supply only liquid water proofing compound. complete all as specified and as directed. |
| 76 | M&L for PCC type B1 (1:2:4) using 20 mm graded crushed aggregate in coping ,mass concrete. complete all as specified and as directed. |
| 77 | Supply and fixing Heat Resistant Terrace Tiles (300 mm x 300 mm x 20 mm) with SRI (solar refractive index) > 78, solar reflection > 0.70 and initial emittance > 0.75 on waterproof and sloped surface of terrace, laidon 20 mm thick cement sand mortar in the ratio of 1:4 (1 cement : 4 coarse sand) and grouting the joints with mix of white cement & marble powder in ratio of 1:1, including rubbing and polishing of the surface upto 3 cuts complete, including providing skirting upto 150 mm height along the parapet walls in the same manner. |
| 78 | M&L priming surfaces and applying normal treatment (for moderate condition ) for App based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforment with polyster non woven fabric (wt not less than 150 gms/sqm) laid on primed surfaced application including preperation of new surface of membrane and applying two coats of Alumminium paint, complete all as specified and as directed . |
| 79 | Taking down carefully any type of battens or conduit point wiring with conduit (light, fan, socket or power) complete including fittings and fixtures such as switches, sockets, ceiling roses, lamp holders, pendent light fittings, MCBs / isolators, fan regulators, tube light fittings etc removing material from site to match the existing complete all as directed. |
| 80 | M&L for concealed point wiring with 1.5 Sq.mm nominal cross sectional area, single core, 1100 Volts grade, multi stranded, FR-LSH, conforming to IS: 694-1990, PVC insulated, unsheathed copper conductor and including PVC concealed conduit of 20 mm dia or higher, medium grade complete with and including all PVC conduit accessories / fittings, brass screws, washers etc, sunk zinc coated pressed steel terminal box suitable for fixing moduler switches, sockets, regulator etc including modular inner frame and outer plate cover with continuous green earth wire of size 1.5 Sqmm nominal cross sectional area, single core, PVC insulated multi stranded, FRLS copper conductor cable, unsheathed and connected to common earth and earth dolly including cutting holes in or through the walls, making good to walls, ceiling etc including two coats of white / colour washing / distempering etc to the disturbed surfaces to match complete all as directed for One light point wiring controlled by one, one way switch/bell push button. The point wiring shall include the wiring of light/ outlets of any length from the distribution board via switch to the point. (a) one light/ fan point control by one 1- way switch |
| 81 | All as described item ser No 80 here-in-before but one out let socket point 3pin 5 amps on independent board. complete all as specified and as directed. |
| 82 | All as described item ser No 80 here-in-before but on the same board with other switches complete all as specified and as directed. |
| 83 | All as described item ser No 80 here-in-before but using 2.5 sqmm copper conductor with 2.5 sqmm earth wire for one 15 amps socket outlet on independent board all as directed. |
| 84 | All as described item ser No 80 here-in-before but using 4 sqmm copper conductor with 4 sqmm earth wire for one 20 amps socket outlet on independent board all as directed. |
| 85 | S&F Modular Switch, 1 module, 6A, AC, 240V, one way ISI Marked and as specified. |
| 86 | S&F Modular Socket, 2 module, 6A, 2/3 pin combined, AC, 240V, ISI Marked and as specified. |
| 87 | S&F Modular Socket, 2 module, 6A / 16A, 2/3 pin combined, AC, 240V, ISI Marked and as specified. |
| 88 | S&F Modular Switch, 1 module, 16A, AC, 240V, one way ISI Marked wirh indicator and as specified. |
| 89 | S&F Modular MCB, SP 1 module, 32A, AC, 240V, one way ISI Marked wirh indicator and as specified. |
| 90 | S&F 1 module modular blank plate complete all as specified and directed. |
| 91 | M&L lamp holder (Angular / Straight), insulated body, with back plate all as specified and directed. |
| 92 | S&F 15 watt LED bulb 2 pin B22 base,100 Lumems per watt,PF≥0.9, voltage surge protection complete |
| 93 | M&L of ceiling rose, 2 phase/PVC/polycarbonate isolated body complete all as specified & directed. |
| 94 | S&F wall mounted LED tube light fitting 20 watt with polycarbonate housing with all accessories and fixing material complete all as specified and directed. |
| 95 | S&F decorative LED tube light fitting 10 watt 2' wall mounted with extruded polycarbonate ,integrated lamp & driver with opal diffuser and decorative end plates complete with all accessories and fixing material complete all as specified and directed. |
| 96 | Supply and fixing LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete. |
| 97 | S&F 35W LED building security light energy saving & environmental friendly long life luminaire with high power LEDs as light source and electronic driver including all material required for fitting all as specified and directed. |
| 98 | S&F Exhaust fan with louver PVC and fixing accessories 230 Volt and 250 mm sweep mounted on aluminium frame all as specified and as directed. |
| 99 | S&F Exhaust fan with louver Metal body and fixing accessories 230 Volt and 450 mm sweep mounted on aluminium frame all as specified and as directed. |
| 100 | S&F BLDC ceiling fan 1200mm sweep with fan remote, 210CFM air delivery 6.00, BEE 5 star energy rated minimum service value≥6,copper winded motor ,anti rust powder coated aluminium blade,double ball bearing, dynamically balanced including canopy,down rod as per site rqmt ,shackel assembly,safety pin,nut bolt etc electrical connection with flexible Cu conductor cable of appropriate size from ceiling rose/junction box to the fixture complete incl writing MES No. all as specified and directed. |
| 101 | Supply and fix electric water heater, storage type glassline coated inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, connection pipes,hanging assembly etc connecting with 3 core flexible Cu conductor cable of appropriate size from power point to the geyser including plug top,writing MES No. ,complete all as specified and directed. |
| 102 | M & L for cutting / making opening having dia of the hole up to 450 mm size in cement concrete walls (any description) with or without reinforcement suitable for mounting up to 450 mm PVC exhaust fan along with making good disturbed surfaces matching with existing distember / paint / white washing surface on both inner & outer sides of the wall, making the inner hole surfaces even & fair including necessary plastering work on outer / inner side of the wall, nut, bolt, washer for fixing the fan on wall of bldg & disposal off rubbish rubbish out of the campus & as directed. |
| 103 | S&F for sub main wiring with 06 Sqmm nominal cross sectional area, two single core, 1100 Volts grade, stranded, PVC insulated FR-LSH, unsheathed, copper conductor cable with and including continuous earth wire of size 06 Sqmm nominal cross sectional area, single core, PVC insulated FR-LSH, unsheathed,copper conductor cable drawing into and including rigid non metallic PVC concealed conduit of 25 mm dia, medium grade with all conduit accessories / fittings, brass screws, washers etc and connected to common earth dolly including all cutting / chases etc in wall, making good to walls etc including two coats of white / colour washing / distempering etc to the disturbed surfaces to match the existing incl taking down old u/s submain wiring complete all as specified & directed. |
| 104 | S&F sheet metal enclosure double door, single pole and neutral, AC, 240 volts, 08 way, with 200 Amps rated copper bus bar and IP - 43 protection with metal double door and flush to wall including all cutting on wall and making good including two coats of white/colour washing/distempering etc to match the existing disturbed surfaces incl taking down old u/s DB's complete all as directed. |
| 105 | S&F Vertical Loadline sheet metal enclosure double door, Triple pole and neutral (TP&N vertical loadline) AC, 415 volts, 04 way, with 200 Amps rated copper bus bar and IP - 43 & IK 09 protection, with the inbuilt provison for fixing of 1 No MCCB of XT1160 frame suitable upto 125 Amp and 12 Nos MCB'S inside of DB, with metal door and flush to wall including grouting and cutting in existing wall and making good disturbed surface with two coats of white / colour washing / distempering etc to match the existing one and taking down the old distribution board along with mcb,mccb complete all as directed Note:- MCB's,MCCB will be measured and paid separately as required. |
| 106 | S&F MCB, SP, AC, 240 volts \\"C\\" series capacity of 06 to 32Amps, 10kA and making connections complete all as specified & directed. |
| 107 | S&F MCB SPN 40 A, AC, 240V, 10KA, ISI Marked 'C' curve incl thimble etc complete all as specified and directed. |
| 108 | Supply and fix MCCB 100A, 4P 415V fixed type 16KA breaking capacity complete all as specified and as directed. |
| 109 | Material & labour for earthing complete with galvanised mild steel earth plate electrode 60cmx60cmx6mm thick buried directly in ground (earth pit not less than 2.25mtr deep below ground level) with top edge of the plate not less than 1.5mtr below normal ground level steel earth plate connected with GI wire 04mm dia by means of lug, bolts, nuts, check nuts, washers of galvanised iron or steel GI protection pipe 15mm bore light grade all as shown in elect plate No.3 of SSR part I connecting to main switch board / Main DB’s including excavation, earth work, salt and charcoal dust mixed and packed 150mm thick around GI earth plate, GI pipe medium grade 20mm nominal bore watering pipe GI sheet funnel wire mesh, concrete pit, RCC cover in PCC 1:2:4 type B1 duly reinforced with MS Bars 6mm dia at the rate of 150mm center to center both way with suitable lifting handle and pit / chamber in PCC 1:3:6 type C1 , Angle iron 40x40x5mm frame for pit cover including testing on completion complete all as specified and directed. |
| 110 | Supply ,laying commissioning ,testing of XLPE under ground LT cable 1100 volts grade of size 35 sqmm 3.5 core armoured PVC sheathed with aluminium conductor heavy duty laid in trench ,fixing on wall ,under road crossing through proctection pipe etc including taking down old LT UG cable complete all as specified and directed. |
| 111 | Excavation in trenches not exceeding 1.5 Mtr wide and not exceeding 1.5 Mtr in depth and getting out including foming of bottom surface for laying of cable / pipe etc in soft/loose soil. complete all as specified and as directed. |
| 112 | Returning filling in including spreading levelling, watering and well ramming in layers not exceeding 25 cm. complete all as specified and as directed. |
| 113 | Removing surplus soil to a distance not exceeding 50 Mtr and depositing where directed at a level not exc 1.5M above the starting point. complete all as specified and as directed. |
| 114 | M&L for sand cushioning, spreading & levelling, watering and well ramming in layers not exec 25cm in soft/loose soil. complete all as specified and as directed. |
| 115 | Supplying & laying burnt clay fly ash old size bricks, straight or curved on plan, laid flat with width equal to length of brick, laid dry over under ground cable for protection complete all as specified and directed. |
| 116 | GI light grade tubing 40mm dia laid in trenches, road crossing , pasing through pipe or laid in wall/pole complete all as specified and as directed. |
| 117 | Excavation in trenches in soft/lose soil n.exc. 1.5M wide & n exc 1.5M deep for laying of GI/CI pipe line & getting out including forming bottom surface all as specified and directed. |
| 118 | Returning, filling in, trenches including spreading, levelling, watering and well ramming in layer n.exc. 250 mm in any type of soil after the pipe laid & tested complete all as specified and directed. |
| 119 | Removing excavated surplus soil to a distance n.exc. 50mtr and depositing where directed at a level n.exc. 1.5 m above the starting point all as specified and directed |
| 120 | Disconnecting and Taking out old existing GI pipe and connecting of any description / grade and any position of trenches / under floors/ on walls etc including connecting fitting / accessoriese and fixtures such as bend, union, elbow socket etc. all as directed and specified for the following size of pipe :- (a) 40/ 50mm dia bore |
| 121 | All as described item ser No 120 here-in-by but 25mm dia bore complete all as specified and as directed. |
| 122 | S & F GI tubing, medium grade, 50 mm bore ISI marked complete with all fittings, laid in trenches or laid under floors, fixed on walls with and providing clamps etc complete all as specified & directed,. |
| 123 | S & F GI tubing, medium grade, 25 mm bore ISI marked complete with all fittings, laid in trenches or laid under floors, fixed on walls with and providing clamps etc complete all as specified & directed,. |
| 124 | M & L 25 mm Gun metal gate valve with iron wheel head screwed both ends for iron pipe including testing complete all as specified and as directed. |
| 125 | M&L for making joint to existing CI/DI line incld making hole of desired size if required along with reducer and other accessories etc complete all as specified and as directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 17, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 09, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 7 daysNov 16, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 14 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender