Tender For Provn Of Parking Shed For 10X Army Buses In Mt Area Of Jla Bareilly And Certain Other Works Under Ge (W) Bareilly
Tender Value
45.24 Lakhs
Estimated cost
Bid Submission
07 Nov 2026
14 days left
EMD
90500
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Bareilly → Uttar Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Provn Of Parking Shed For 10X Army Buses In Mt Area Of Jla Bareilly And Certain Other Works Under Ge (W) Bareilly
BOQ
| Sl. No. | Item Description |
| 1 | Surface excavation n.exc 30cm deep and averaging 15cm deep and getting out in soft / loose soil.all as specified and directed. |
| 2 | Excavating in trenches n.exc 1.5m wide and n.exc 1.5m depth for foundation etc or wells cess pits manholes n.exc 10 Sqm on plan and getting out in soft & loose soil complete all as specified and directed. |
| 3 | M&L for Cement concrete type D 2 1:4:8 (40 mm graded aggregate) in foundation filling and mass concrete |
| 4 | M&L for Reinforced cement concrete (nominal mix) in type B1 1:2:4 (20 mm graded stone aggregate) as in foundations, including rafts, footings, foundation beams plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and directed. |
| 5 | M&L for Reinforced cement concrete (nominal mix) in type B1 1:2:4 (20 mm graded stone aggregate) as in Columns, pillars, piers, posts and struts complete all as specified and directed. |
| 6 | M&L for Reinforced cement concrete (nominal mix) in type B1 1:2:4 (20 mm graded stone aggregate) as in beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and directed. |
| 7 | M&L for Reinforced cement concrete (nominal mix) in type B1 1:2:4 (20 mm graded stone aggregate) as in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves, chajjas and the like complete all as specified and directed. |
| 8 | M & L Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter complete all as specified and directed. |
| 9 | M & L formwork to sides of pillars, posts, struts, piers, columns and stanchions square, rectangular finishes rough surfaces of concrete.etc finished rough surfaces of concrete complete all as specified. |
| 10 | M&L for Form work to soffits of suspended slabs flat surface of concrete and chajjas finished rough surfaces of concrete not exceeding 200mm thick, complete all as specified and directed. |
| 11 | M & L formwork to sides and soffits of lintels,lintel bend, beams etc finished rough surfaces of concrete complete all as specified. |
| 12 | M&L for Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia for securing with clips quality conforming to deformed or TMT bars.complete all as specified and directed. |
| 13 | M&L for Mild steel TMT bars 6 to 8 mm dia as in stirrups and cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia for securing with clips quality conforming to deformed or TMT bars.complete all as specified and directed. |
| 14 | M&L Moorum/red bajri filling in floors or pavings, laid in layers n exc 15 cm thick, spread, levelled and rammed including watering all as specified and directed. |
| 15 | M&L broken stone or boulder hard core of gauge n exc63 mm deposited spread and levelled in layers n,exc 15 cm thick watered and rammed to true surface complete all as specified and directed. |
| 16 | M&L for 75 mm thick PCC 1:4:8 type D2 (40mm stone graded aggregate) as in sub bases, sub flooring finished even and rough. complete all as specified and directed. |
| 17 | M&L for 25 mm thick Cement concrete type B-1, 1:2:4 (20mm stone graded aggregate) as in floor finishes, floors etc complete all as specifeid and directed. |
| 18 | M&L Damp proof course 40mm thick of PCC type B0 1:2:4 complete all as specified and directed. |
| 19 | M&L for Brickwork with fly ash bricks, straight or curved on plan exc 6m mean radius, built in, built in CM (1:6) Complete all as specified and directed. |
| 20 | M&L for Brickwork with fly ash bricks, straight or curved on plan exc to any radius, half brick walls, built in CM (1:4) Complete all as specified and directed. |
| 21 | M & for rendering 12 mm thick of fair faces of brick work or concrete surfaces cement plaster 1:6 finished even and fair without using extra cement. complete all as specified and directed. |
| 22 | M & L for rendering 15mm thick in cement mortar 1:4 on otherthan fair faces of brick work or concrete surfaces and finished even and smooth without using extra cement complete all as specifed and directed. |
| 23 | M & L for rendering 5mm thick on ceiling or concrete surfaces in cement mortar (1:3) newly surface even and smooth without using extra cement and necessary scaffolding all as spd and directed |
| 24 | M&L preparation of newly plastered surfaces and applying two coats of oil bound distemper on walls over a coat of primer incliding wall care putty complete all as specified & directed |
| 25 | M&L for preparation of new plastered surfaces of walls and applying two coat exterior emulsion paint over a coat of primer including wall care putty complete all as specified and directed |
| 26 | M&L for three coats of white washing on ceiling surfaces including preparation of newly plastered untreated surfaces and necessary scaffolding all as spd and directed |
| 27 | M&L for Glazed (plain /coloured) ceramic tiles wall 300mmx600mmx7mm thick on vertical faces of walls over and including M&L for 10mm thick rendeing in CM 1:4 set jointed in neat cement slurry and pointed in coloured cement to match complete all as specified. |
| 28 | M & L for non- skid ceremic coloured tiles 7 mm to 8 mm thick (Square / rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including M&L for screed bed or bedding layer of mortar 15mm thick in cement mortar 1:6 for laying floor finishes all as specified. |
| 29 | M&L 16mm to 18 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, door/ window cills, cooking platforms, wash basin counters and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed. |
| 30 | M & L 75 mm thick PCC 1:3:6 type C2 (40mm stone graded aggregate) as in plinth protection finished even and smooth without using extra cement. complete all as specified and directed. |
| 31 | S & F solid PVC door frame of size 50mm X 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, S & F in opening as per manufacturers instructions and as directed by Engineer-in-Charge. |
| 32 | Supply and fixing factory made solid panel PVC door shutter 30 mm thick (style)consisting of frame made out of MS tubes for top and bottom rail. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail ; panelling of plain colour PVC sheet to be fitted in the M.S frame welded/sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement, suppling & fixing in the frame as per manufacturers instructions and as directed by Engineer-in-charge. |
| 33 | S & F pressed steel frames for doors size 105mmx60mmx1.25mm with oxne or more rebates including necessary fixing lugs, hinges, lock strike plate etc complete as specified. |
| 34 | S&F for 35 mm thick flush shutter, solid core construction with block board core and ply wood face panels, commercial type on both side, complete all as specsified & directed. |
| 35 | S&F for 100mm long stainless steel butt hinges complete all as specified and directed. |
| 36 | S&F of aluminium anodised barrel tower bolts of extruded section and fixed 150mm complete all as specified and directed. |
| 37 | S&F of extruded aluminium handles fabricated type anodised 200 mm long complete all as specified and directed. |
| 38 | S&F of 300mm long aluminium anodised sliding door bolts plate type stove enameled black with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate all as spd and directed. |
| 39 | S& F for steel ventilator with top hung shutter including hinges, steel peg stay, complete all as specified and directed. |
| 40 | S&F Figured glass, pin head type 3mm thick and glazing with aluminium glazing clips in square n.exc 0.5 sqm in each pane. complete all as specified and directed. |
| 41 | M&L painting to wood and wood based surfaces of any description exc 10cm with or girth with two coats of synthetic enamel paint over a coat of pink primer including preparation of newly or previously untreated surface all as spd and directed |
| 42 | M&L for painting to steel surface exc 10 cm width or girth with two coats of synethic enamel paint over a coat of red oxide primer including preparation of newly or previously untreated surface all as spd and directed |
| 43 | S&F PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors 110mm bore complete all as specified and directed. |
| 44 | S&F PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors 75mm bore complete all as specified and directed. |
| 45 | S&F PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls 110mm bore complete all as specified and directed. |
| 46 | S&F PVC (SWR) bends any radius 110mm bore complete all as specified and directed. |
| 47 | S&F PVC (SWR) bends any radius 75mm bore complete all as specified and directed. |
| 48 | S&F PVC (SWR) bends any radius 75mm bore with access doors complete all as specified and directed. |
| 49 | S&F PVC (SWR) Vent cowls of bore 110mm complete all as specified and directed. |
| 50 | M & L for PVC (SWR) floor trap, plain with grating including jointing with solvent cement diameter of outlet in 75mm.complete all as specified and directed. |
| 51 | S&F for 20 mm bore galvanised steel water tubing with all fittings 'medium grade' and fixed complete to wall and ceiling or laid in floors complete all as specified or as directed. |
| 52 | S&F for 15 mm bore galvanised steel water tubing with all fittings 'medium grade' and fixed complete to wall and ceiling or laid in floors complete all as specified or as directed. |
| 53 | S&F 20 mm Ball valves high pressure of PTMT with epoxy coated aluminium rod and high dessity plastic ball screwed for iron pipe and fixed ( minimum weight 455 gms) all as specified and as directed. |
| 54 | S&F of 20 mm dia Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed. |
| 55 | S&F of 15 mm dia Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed. |
| 56 | S&F for 15 mm Bib taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed. |
| 57 | S&F for fancy type chromium plated brass angle valve type suitable for 15mm bore pipe complete all as specified and directed. |
| 58 | S&F PVC low level flushing cistern 10 litres, valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets, flushing pipe complete all as specified and directed. |
| 59 | Supply and fix PVC connection 15mm size with PTMT nuts of length 600mm.complete all as specified and directed. |
| 60 | S & F 15mm bore pillar taps, fancy type cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed. complete all as specified and directed. |
| 61 | S&F Towel Rail 600 mm long of PTMT fixed with and including chromium plated brass screws and wooden/plastic cleats ( Min wt 190 gms) complete all as specified and directed. |
| 62 | S&F Vitreous china counter sunk wash basin, white, oval shape excluding ditto but including brackets, including cutting for and pinning in ends of brackets or erecting stand but exclusive of fixing of supply and waste pipe complete all as specified and directed. |
| 63 | S&F designed looking mirror area exc 0.54 sqm to 0.75 sqm of selected quality 6mm thick glass, mounted on fixed to wall with CP plugs with chromium plated brass screws and cup washers, complete all as specified and as directed. |
| 64 | S & F Vitreous China Urinal, Half stall type, white complete including providing and fixing plugs, bedding urinal against wall in CM 1:2, securing urinal to plugs with 60 mm long brass screws, pointing around urinal back in cement, including all fittings cistern, brackets, flush pipe, spreader, push tap, waste coupling, grating, etc Complete set incl all fitting & fixtures as specified and directed. |
| 65 | S&F of vitreous china squatting pan of orrissa pattern long pan size 580mm x 440 mm white with \\"P\\"or \\"S\\" trap size 100 mm dia front or back inlet and integral foot rest any pattern (excluding flushing cistern and flush pipe) including provn of lime concrete bedding (1:2:5), minimum 150mm all round and finish just below level of rim of pan complete all as specified and directed. |
| 66 | S & F of vetrious china wash down water closet (pedestal pattern) white compete, including seat cover, connectiong drain pipe and to flush pipe anti syphonage pipe etc complete all as specified and directed. |
| 67 | S&F rotational moulded polyethylene water storage tanks 500 ltrs(cylindlerical vertical with closed top) hoisted and fixed in position all as specified in SSR part I. |
| 68 | S&F fancy type brass chromium plated soap dish of 160mmx160mmx90 mm complete all as specified and directed. |
| 69 | S & F for PVC waste pipe of 32 mm dia for WHB etc complete all as specifed and sirected. |
| 70 | S&F of 100mmx100mm stainless steel grating fixed complete all as specified and directed. |
| 71 | Returning filling in including spreading, levelling watering and well ramming in layers not exc 25cm thick. |
| 72 | Removing excavated material n.exc 50m and depositing where directed at a level n.exc 1.5m above the starting point. |
| 73 | M & L for Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade with grey cement and pigment of approved design and patterm over and including M&L for laid over a layer of 25 mm thick sand cushion including filling the joint with and including M&L for 75 mm thick PCC 1:4:8, Type D2 (using 40 mm stone graded aggreagte) as in sub base over sand including nccessary earth work and PCC for kerb of tiles complete all as specified. |
| 74 | M & L for laying of 150 mm dia reinforced concrete pipe, class NP2 pipe laid in trenched and jointed with collers sealed with cement including PCC bebbing, packing under and completely surrounding the pipes after they are laid and tested complete all as specified and directed. |
| 75 | Excavation in Post holes (or similar holes ) in any type of soil, each not exe 0.5 cum , getting out , returning filling and ramming earth not exc 25cm , watering and removing surplus soil to a distance not exc 50 mtr and making good surface complete all as specified and as directed. |
| 76 | M&L for Plain cement concrete (1:2:4) type B2 using 40 mm graded stone aggregate as in filling for post holes complete all as specified and as directed. |
| 77 | S&F steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161-1979 grade Fe-410 gde st- 240 complete all as specified and as directed. |
| 78 | S&F Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment confirming to grade Fe-410 -W(Gde E-250) quality complete all as specified and as directed. |
| 79 | S & F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as direced. |
| 80 | M&L for Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as direced. |
| 81 | M &L for preparation of new steel surfaces and applying two coats of black bituminious paint exceeding 10cm in width or girth all as specified and as directed. |
| 82 | M&L 15mm thick rendering in cement mortar 1:4 to on brick masonary wall surfaces or on other than fair faces of brick masonary fair finished without using extra cement with using water proofing liquid complete all as specified and directed |
| 83 | M&L two coats of cement base paint on new plastered wall surfaces over a coat of primer including wall care putty of any description including preparation of surfaces complete all as specified and as direced. |
| 84 | M&L for Hardcore of broken stone boulder of gauge n exc. 63 mm, deposited, spread andlevelled in layers n exc. 15 cm thick, watered and rammed to a true surface all as specified and as directed. |
| 85 | M&L for 100 MM thick PCC 1:4:8 type D-2 using 40 mm graded stone aggregate as in floors complete all as specified and as directed. |
| 86 | M&L for Cement concrete work in pavement / hard standing of flexural strength 40 Kg/ square centimeter in field, using 400 Kg of cement per Cum thickness of concrete 25 cm or less including use of form work complete all as specified and as direced. |
| 87 | M&L forming 12 mm thick expansion joint filled with pre-formed bituminous filler and top 30 mm primed and sealed wih sealing compound grade `A' complete all as specified and as directed. |
| 88 | M&L forming construction joints 30mmx100mm wide, filled with sealed with sealing compound, grade `A' complete all as specified and as directed. |
| 89 | M&L forming contraction (Dummy) joints 65mm deep 10mm wide, filled with sealing compound, grade `A' complete all as specified and as directed. |
| 90 | M&L for excavation over areas, n exc 1.5m deep and getting out in soft/loose soil all as specified and directed. |
| 91 | Demolition of brick work or stone/boulder masonry built in cement mortar or cement lime mortar including all quoins, arches, pillars etc but excluding ashlar facing dressed stone work and precast concrete articles all as specified and directed. |
| 92 | M&L for rendering 15mm thick in CM 1:4 on brick masonary wall surface or on other fair faces of brick masonary finished even and fair without using extra cement including taking down old cement plaster of any description complete all as specified and directed. |
| 93 | M&L for preparation of new plastered surfaces or concrete surfaces and applying two coat of cement base paint over coat of primer complete all as specified and directed |
| 94 | M&L for PCC 1:2:4 type B1 using 20mm stone graded aggregate as in cill, coping steps, bed blocks, tank staging, sesmic and other similar courses, lacing courses parapet and railing upto 60cm ht kneeler kerb and a like including weathering, slightly rounded or chemfered angle and throating as directed. |
| 95 | M&L for precast cement concrete 1:3:6 type C-1 (usimg 20mm graded stone aggregate) in bonders (for stone walling) etc. (of any section indicated), with plain fair faces, including chamfers, weatherings, throating and setting in CM 1:6 complete with joints to match . complete all as specified and as directed. Note - Adjustment rate for PCC bond stone in lieu of stone bond stone as per preamble 6 2 7 of SSR part II (2010) |
| 96 | M&L for forimg embankments including raising (or lowering) earth, spreading in layers n exc 30cm thick watering, eamming/rolling and finishing to required size, shape, etc, uo to 3mtr high from base including supply approved earth/soil from out side MoD land complete all as specified and directed. |
| 97 | Material and labour for point wiring with single core FRLS 1100 volt grade cable with multi stranded copper conductor of size 1.5 Sq mm (Nominal area) drawn through and including non metallic rigid PVC conduit medium duty ISI marked not less than 20mm dia, with all conduit accessories, screws (concealed conduit wiring in walls and casing capping on ceiling or roof) including metal box suitable for modular fittings and covered with modular plate and cover of suitable size with new brass screws for mounting switch sockets and regulators and drawing continuous earth wire with and including PVC sheathed 1100 Volts grade cable with stranded copper conductor of size 1.5 Sq mm (Nominal area) and connected to main earth dolly complete all as specified for:- One light / fan/ exhaust fan point controlled by one switch. |
| 98 | (b) All as per item 99 here in before but for One 5 pin 5 Amp switch socket out let point on an independent board. |
| 99 | (c) All as per item 99 here in before but for One 5 pin 5 Amp socket out let point controlled by one switch on same board. |
| 100 | All as per item 99 here in before but for one 15 Amp 6 Pin switch socket out let independent with 2.5 Sqmm FRLS (Nominal Area) PVC unsheathed copper conductor single core multistranded incl 2.5 sq mm FRLS PVC copper conductor single core used as earth continuity conductoe complete all as specified.complete all as specified. |
| 101 | M&L for wiring with and including multi stranded copper conductor 2.5 Sqmm (nominal cross sectional area) single core, PVC insulated, unsheathed, FRLS cable, 1100 volts grade, ISI marked with valid CML number, drawing through in and including medium grade, rigid non metallic, PVC concealed conduit of 20mm bore and including cutting chases for conduits and sinkings for boxes, its accessories & including with multi stranded copper conductor 1.5 Sqmm (nominal cross sectional area) single core, PVC insulated, unsheathed, FRLS cable, 1100 volts grade, ISI marked with valid CML number as continuity earth wire terminating with new sunken concealed terminal boxes complete all as specified and directed. |
| 102 | S&F, switch piano, flush button, single pole, one way 15 Amps complete all as specified and directed |
| 103 | S&F, Socket outlet 15 Amps complete all as specified and directed |
| 104 | S&F, switch piano, flush button, single pole, one way, 5 Amps complete all as specified and directed |
| 105 | Supply and Fixing ceiling rose PVC / Poly carbonate, Isolated body, three terminal AC 230 volts complete all as specified and directed. |
| 106 | M&L for Angle Holder, insulated body with back plate with & including LED Lamp 7 Watt suitable for batten fittings complete all as specified and directed by Engr-in-Charge. |
| 107 | S&F, LED light fitting, high lumens batten type, housed in extruded from powder coated aluminium, 10 watt for soft diffuser lighting with and including lamp and connecting up complete with white PVC insulated and PVC sheathed round flexible three core copper conductor cable of suitable size complete all as specified and directed. |
| 108 | Supply & Fixing security light fitting, LED type, 25 Watt, 6000 K, pressure die cast housing with prismatic polycarbonate diffuser & indvl LEDs as light source with integrated electronic driver complete with M&L GI pipe mounting bracket of size 25/32 mm dia and 1.20 m long fixed to wall with and including nut, bolts and GI clamps of size 50 x 6 mm as required including two coats of synthetic enameled paint over a coat of primer and making connection with three core 23/.0076 rubber insulated copper cable from ceiling rose to connector of street light complete all as specified and directed. |
| 109 | S&F MCB SPN 16 Amp 240 volt complete all as specified and directed by the Engr-in-Charge. |
| 110 | S&F MCB single pole 6 to 32 Amp 240 Volt 'B' curve 10 KA complete all as specified and directed by the Engr-in-Charge. |
| 111 | Supply and fix flush sheet metal enclosure SPN DB 4 way with double door IP-42 protection detachable gland plates, flush mounting for MCB fitted with bus bar , earth bar and neutral links complete including taking down old unsv all as specified and directed. |
| 112 | M&L for earthing and testing complete with galvanized iron earth plate electrode 60 cm x 60cm x 6mm thick buried directly in ground vertically to a depth not less than 2.25 M below normal ground level with top edge plate at adepth not less than 1.5M below normal ground level connected to and including earth lead GI wire 4 mm dia, by means of bolts and nuts,check nuts and washers etc.,made of GI and connected to panel/distribution board and earthing test point and earth dolly all as shown in elect plate No.3 of SSR Part-1 including necessary earth work,excavation PCC chamber cover with handle (PCC 1:2:4) incl 20mm dia GI pipe of medium grade for watering and 15mm dia GI pipe of light grade for protection of earthing lead ,wire mesh, funnel, charcoal dust,common salt,copper lugs etc all as specified and directed . |
| 113 | Supply and fix Exhaust Fan Metal Body AC single phase 230/240V of size 300 mm sweep with louver complete all specified and directed. |
| 114 | Supply and fix Water heater storage type, electric,capacity 25 litres.BEE 5 star rated |
| 115 | S & F Modular switch one way 6 A, 1 Module complete all as specified and directed by the Engr-in-Charge. |
| 116 | S & F Modular switch one way 16 A, 1 Module complete all as specified and directed by the Engr-in-Charge. |
| 117 | S & F Modular Socket 6 Amp, 2/3 Pin combined 2 Module complete all as specified and directed by the Engr-in-Charge. |
| 118 | S & F Modular Socket 6/16 Amp, 2/3 Pin combined 2 Module complete all as specified and directed by the Engr-in-Charge. |
| 119 | S&F LED mirror light fitting of 1 x 20 watt LED batten with aluminium housing with all accessories prewired suitable for wall /surface mounting complete with connection all as specified and directed. |
| 120 | S & F of 1100 volts grade heavy duty two single core 4 Sqmm size (Nominal Area) PVC insulated (FRLS) copper multi-stranded conductor cable as in sub main wiring, drawn into & including PVC conduit medium grade not less than 25 mm dia including its all accessories & fittings, fixed concealed with and including chase cutting and making good the same as per existing specifications along with a continuous run of 4 Sqmm size (Nominal size) stranded copper conductor PVC insulated (FRLS) (green colour) cable as earth wire complete all as specified and directed. NOTE: - TWO SINGLE CORE CABLES ALONG WITH EARTH WIRE AND PVC CONDUIT SHALL BE MEASURED AS ONE UNIT LENGTH. |
| 121 | S&F MCB SPN 40 Amp 240 volt complete all as specified and directed by the Engr-in-Charge. |
| 122 | Supply and fix flush sheet metal enclosure SPN DB 8 way with double door IP-42 protection detachable gland plates, flush mounting for MCB fitted with bus bar , earth bar and neutral links complete all as specified and directed. |
| 123 | Supply and laying & testing UG cable XLPE Insulated, screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (Heavy duty) 1100 Volts grade with stranded aluminium conductor of size 10 sq mm, 2 core. |
| 124 | M&L for sand cushioning by using fine sand in two layers, first layer of 80mm thick before laying of cable and second layer of 150mm thick after laying of cable ( total punned depth of sand shall be 180mm after punning down ) complete all as specified and directed Note:- Punned thickness shall be measued |
| 125 | M&L Modular bricks common burnt clay building bricks, sub-class ‘B’ designation-75 for LT UG cable protection complete all as spd and directed. |
| 126 | S&F GI tubes light grade of dia 40 mm with all fitting and fixed complete for protection of LT UG Cables laid to walls or in floors or along with poles etc complete all asspd and directed. |
| 127 | Notes:- Tenderers may note that amount as given in schedule of credit will be deducted from the total amount to worked out the net contract sum at the time of Acceptance of tender. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 17, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 07, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 14 daysNov 09, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 16 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender