Tender For Provn Of Chain Link Fence For Bldg. No P-01, P-05 & P-06 At Roy Choudhary And Other Sanctioned Work Under Nams
Tender Value
44.13 Lakhs
Estimated cost
Bid Submission
07 Nov 2026
4 days left
EMD
88277
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Amritsar → Punjab
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Provn Of Chain Link Fence For Bldg. No P-01, P-05 & P-06 At Roy Choudhary And Other Sanctioned Work Under Nams
BOQ
| Sl. No. | Item Description |
| 1 | Excavating in trenches, n.exc 1.5m wide and n.exc. 1.5m in depth for foundation, etc. or for shaft, wells and cesspits in soft/loose soil all as directed. |
| 2 | Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm all as directed. |
| 3 | Removing excavated material n, exc 50m and depositing where directed at a level n exc 1.5m from the base. |
| 4 | M & L for cement concrete Type B2 1:2:4 using 40 mm graded stone aggregate in foundations, filling and mass concrete complete all as specified. |
| 5 | Supply only chain link MS galvanized fencing of any size or type complete all as specified and directed. |
| 6 | Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc.including provission of binding wire. complete all as specified and directed. |
| 7 | S & F mild steel bolt screwed one end with hexagonal or square nuts & washers the other end enlarged not exc 15cm long dia of neck 12mm complete all as specified and directed. |
| 8 | M&L for Hand rails, half round or other steel section or core for wooden hand-rail straight portion,drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts posts and struts in fencing including cutting tops to shape as directed, drilling holes,notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc.,and similar work conforming to Fe-290 Gde E-165 all as specified and directed. |
| 9 | S & F mild steel flat iron, round or square bars, in available lengths, Fe-290, Gde-E-165 complete all as specified and directed. |
| 10 | S&F 10mm dia MS Round bars as in support of Chain Link Fencing complete all as specified and directed.. |
| 11 | M&L for preparation of new steel surfaces exc 10cm width or girth and applying red oxied primer over two coat of synthethic enamel paint of approved tint etc complete all as directed. |
| 12 | M & L for Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted,or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165. complete all as specified and directed. |
| 13 | M&L for preparation of new steel surfaces n,exc 10cm width or girth and applying red oxied primer over two coat of synthethic enamel paint of approved tint etc complete all as directed. |
| 14 | M&L for Brickwork with sub class-B , straight or curved on plan exc 6m mean radius, in half brick thick walls built in in CM 1:4 etc complete all as specified and directed.. |
| 15 | M&L PCC 1:4:8 type D2 using 40mm grade stone aggregate as in foundation concrete etc complete all as specified and directed. |
| 16 | M & L for rendering 15mm thick plaster in CM (1:6) on faces of brick work or concrete surfaces, finished with 1mm thick sagol finish complete all as specified and directed. |
| 17 | M&L two coat of cement base paint on new surface over a coat of primen complete all as specified and directed Engr-in-Charge. |
| 18 | Forming embankments including raising (or lowering) earth, spreading in layers n exc. 30 cm thick; watering, ramming /rolling and finishing to required size, shape, etc., n exc. 1.5m high from base complete all as specified and directed |
| 19 | M&L for hardcore of broken or boulders of guage n exc 63 mm deposited spread and levelled in layers n exc 15cm thick watered and rammed to a true surface. complete all as specified and directed. |
| 20 | M&L for brick work with old size sub class 'B' bricks straight or curved on plan exc. 6m mean radius and built in CM 1:6 etc complete all as directed. |
| 21 | M & L for 75 mm thick PCC 1:4:8 type D-2, using 40 mm graded stone agg as in sub base etc complete all as specified and directed. |
| 22 | M&L for providing 40 mm thick Plain Cement Concrete Type B1 1:2:4 (using 20 mm graded stone aggregate) in as in floor, finished even and fair without using extra cement complete all as specified and directed |
| 23 | M&L for 15 mm thick rendering in CM 1:4 on brick/concrete external surfaces of walls sand faced sponge faced finish etc complete all as specified and as directed. |
| 24 | M&L for 3mm thick and 28 mm wide Glass dividing strip inserted in position preparation of newly plastered surfaces of walls and applying two coats of cement based paint etc complete all as directed. |
| 25 | M&L for preparation of newly plastered surfaces of walls and applying two coats of cement based paint etc complete all as directed. |
| 26 | M&L RCC M-25 (Design Mix) Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc; basement slabs, under-reamed piles and mass concrete all as specified and as directed. |
| 27 | M&L RCC M-25 (Design Mix) Concrete as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves all as specified and as directed. |
| 28 | M&L RCC M-25 (Design Mix) Beams, Cantilivers, bressummers, lintels over 1.5m span all as specified and as directed. |
| 29 | M&L for brick work with old size sub class 'B' bricks straight or curved on plan exc. 6m mean radius and built in CM 1:6 etc complete all as specified and directed.. |
| 30 | M&L for brick sub class ‘B’ old size bricks, straight or curved on plan to any radius in half brick thick walls and built in CM 1:4 etc complete all as specified and directed. |
| 31 | Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter etc complete all as specified and directed. |
| 32 | Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; n. exc 200m thick (Horizontal or sloping) etc complete all as specified and directed. |
| 33 | Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc complete all as specified and directed. |
| 34 | Formwork to sides of pillars, posts, struts, piers, columns, and stanchions etc complete all as specified and directed. |
| 35 | Formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor & roofs n exc 20 cm wide & sides of RCC/PCC bands in walls, horizontal or sloping and similar work exc 10cm but n exc 20cm wide etc complete all as specified and directed. |
| 36 | S&F 200 mm size aluminum anodised, barrel tower bolts of extruded section etc complete all as specified and directed. |
| 37 | S&F 150 mm long extruded anodized aluminum alloy handles, fabricated type, etc complete all as specified and directed. |
| 38 | S & F 4.00 mm thick figured glass pin headed tupe fixed in ventillators etc complete all as specified and directed. |
| 39 | M&L TMT bars 10mm dia and over, cut to length, bent to shape required, incl cranking, bending spirally for hooping for columns, hooking ends and binding with the including mild steel wire (annealed) not less than 0.9mm dia or securing with clips etc complete all as specified and directed. |
| 40 | Ditto but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders etc complete all as specified and directed. |
| 41 | S&F steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded etc complete all as directed. |
| 42 | M & L for glazed ceramic coloured joint free tiles in vertical surface 450X 350X 7mm thick with and including 10mm thick CM 1:6 backing coat, set and jointed in neat cement slurry and pointed in white or colour cement to match etc complete all as directed. |
| 43 | M & L for Non - skid/Glossy finish/Matt finish joint free coloured ceramic tiles 7 to 8 mm thick (square/rectangular) laid in floors area of each tile exc. 0.06 sqm but n.exc 0.11 sqm, in floors etc. with and incl 15mm thick screed bed in CM 1:6 , set and jointed in neat cement slurry and pointed in white or coloured cement to match etc complete all as directed. |
| 44 | M & L 25mm thick Cement concrete type B-0, 1:2:4 (12.5mm graded aggregate) as floor all as per direted |
| 45 | M & L for 10 mm thick rendering in CM 1:6 on brick/ concrete surfaces and finishing the surfaces even and smooth with a thin layer of sagol etc complete all as directed. |
| 46 | M&L for preparation of newly plastered surfaces of walls and applying one coat of primer over a coat of birla white cement putty,sanding the surfaces till smooth finish is obtained and finally applying two coats of oil emulsion distemper etc complete all as directed. |
| 47 | M&L for preparation of newly plastered surface and applying three coats of white wash on ceiling etc complete all as directed |
| 48 | M & L for 15 mm bore of tube medium grade Galvanised steel water tubing with all fittings and fixed complete to walls, or laid in floor etc complete all as specified and as directed. |
| 49 | All as per item No 48 above but 20mm bore pipe complete all as specified and directed. |
| 50 | S&F 500 litres capacity rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I etc complete all as directed |
| 51 | S&F 15mm bore bib taps, chromium plated cast copper alloy quarter turn long body screwed down, screwed for iron pipe etc complete all as specified and directed. |
| 52 | S&F for in repair swan neck pillar cock chromium plated fancy type screw with iron pipe incl all fittings complete all as specified and directed. |
| 53 | S&F 15mm bore stop valves, chromium plated cast copper alloy quarter turn long body screwed down, screwed for iron pipe with long shank and cup (concealed type) etc complete all as directed |
| 54 | S&F 20mm bore gun metal globe or gate valves with iron wheel head screwed both ends for iron pipe etc complete all as specified and directed.. |
| 55 | S&F 20mm bore ball brass valves, high pressure, with polyethylene float and fly nut complete, screwed for iron pipe gun metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe etc complete all as specified. |
| 56 | S&F brass chromium plated shower rose with Arm length not less than 150mm swivel joints size 125mm with arm fixing to steel pipe or union incl taking down U/S Shower. complete all as specified and directed. |
| 57 | S&F fancy type Brass chromium plated 600mm long Towel Rod fixed with screws and wooden/plastic cleats etc complete all as specified and directed. |
| 58 | S&F PVC connections 15mm size with PTMT nuts of length 450mm etc complete all as specified and as directed |
| 59 | S&F 75mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors etc complete all as specified and as directed |
| 60 | S&F 110mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints fixed to walls etc complete all as specified and as directed |
| 61 | S&F 75mm bore PVC (SWR) bends any radius with access door etc complete all as specified and as directed |
| 62 | All as per 61 above item but 110mm dia.complete all as specified and as directed |
| 63 | S&F 110 mm bore PVC (SWR) vent cowl etc complete all as specified and as directed |
| 64 | S&F 75mm bore PVC (SWR) floor trap plain with grating including jointing with solvent cement complete all as specified and as directed. |
| 65 | M&L for 1:4:8 type D-2 (40mm graded stone aggregate)Concrete bed to drain pipes including forming cradles against the sides of pipe after they are laid and tested for 150 mm bore of pipe etc complete all as specified and as directed. |
| 66 | Supply and lay Reinforced concrete pipes 150 mm bore of pipe class NP2 laid in trenches and jointed complete with collars etc complete all as specified and directed. |
| 67 | S&F 10 Ltr capacity PVC valveless symphonic action type flushing cistern white low level with ball valve flote handle including bracket and flush pipe of polythylene of low or high density or PVC,32mm dia complete all as specified and directed Note flush tank can be conceiled in wall if reqd i.e in the case of wall hung type water closet pan |
| 68 | S&F vitreous china squatting pan ( Orissa Pattern) size 580 x 440 mm (white), with PVC (SWR) P trap, integral foot rest including water connection to trap and flushing pipe, flushing cistern etc complete and bedding in PCC 1:7:12 type F-2 complete all as specified. |
| 69 | S&F for viterous china wash down water closet pan (pedestal pattern) coloured including 'P' or 'S' trap with flush pipe of chromium plated brass 32 mm dia for low level flushing cistern incl plastic seat cover white closed pattern 54 with float bottom and cover and jet connection and mild steel chrominum plate or aluminized hanging device fixed in repairs complete all as specified and directed |
| 70 | Supply and fix CP flushing jet including 15mm bore 450mm long PVC pipe connection for Europian type closet of 55 suitable length with brass check nut complete all specified and directed |
| 71 | S&F vitreous China wash basin white,flat back size550x400mm including CP waste coupling 32mm bore, including padestal and bracket for fixing etc complete all as specified. |
| 72 | M&L PCC (1:3:6) type C-2 (using 40 mm graded stone aggregate) in foundation concrete and mass concrete of manholes etc complete all as specified and as directed. |
| 73 | M&L for PCC 1:3:6 type C-1 (20mm graded stone aggregate) cast -in -situ as in copings including use and waste of formwork as required etc complete all as specified and directed. |
| 74 | M&L for precast concrete 1:2:4 type B-1 (using 20mm graded stone aggregate)in manholes covers set in CM 1:4 including necessary form work (Note :-Reinforcement will be measured and paid separately) including necessary form work etc complete all as specified and as directed. |
| 75 | S&F 30 mm thick Factory Made Solid Panel PVC Door Shutter consisting of frame made out of M.S. tubes of 19mm x 19mm for stiles, & 15mm x 15mm for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC sheet 5mm thick ‘C’ channel having a 5mm thick PVC sheet strip of 20mm width stuck inside with solvent cement, forming stiles, and plain colour PVC sheets for top rail, lock rail & bottom rail on either side, and as gap insert for top rail & bottom rail. Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with PVC sheet beading, and joined together with solvent cement adhesive etc. complete as per direction of Engineer-in-charge, manufacturer’s instructions and drawing. The width of stiles & rails will be in proportion to the width of the door shutter as per SSR Clause No 8B.2.1 etc complete all as specified and directed. |
| 76 | M&L for Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S Square tube, supplying & fixing in opening as per specification & drawing etc complete all as directed. |
| 77 | M & L 150mm dia pipe Cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-l smooth finished, and reforming benching as required . complete all as specified and directed. |
| 78 | M & L for 50mm avarage thickness PCC 1:2:4 type B1 (using 20 mm graded stone aggregate as roof padding hunching, sub base floor, even and smooth without using extra cement for further treatment complete all as specified and directed |
| 79 | M & L for applying evenly a tack coat of industrial bitumen 85/25 grade @ 1.2 Kg/Sqm including cleaning surfaces etc including APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyester non woven fabric (wt not less than 150 gms/sqm) laid on roof and sunken portion on bitumen surfaces by forced application including chase cutting in roof and making good with CM(1:4) complete all as specified and directed |
| 80 | M&L for 40 mm thick brick tiles laid over 15 mm thick screed bed in cement mortar 1:6 and jointed, grouted flush in cement mortar 1:3 mixed 5% of crude oil of by weight of cement on roof padding flush pointing in CM 1:3 complete all as specified and directed |
| 81 | Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out in soft/loose soil complete all as specified and directed |
| 82 | M & L glazed and coloured chequered tiles of size 300 x 300 x 25 mm thick laid over 15 mm thick screed bed in CM 1:6 bedded and jointed in neat cement slurry, incl dismantiling of stone slab and tiles of any discription or thickness in floors / aprons etc complete all as specified and directed |
| 83 | S&F 100mm long butt Hinges, medium weight, stainless steel and fixed complete all as specified and directed. |
| 84 | M & L for cleaning the newly plastered surfaces of concrete ( roof etc) with wire brushes and applying water proofing treatment as under :- i) Apply Priming surfaces and applying normal treatment (for moderate conditions) using glass fibre base bitumen felt, grade 2 ii) Providing and laying 3 mm thick APP modified water proofing membrane weighing not less than 3.0 Kg / Sqm reinforced with non woven polyester mat weighing not less than 150 gm/Sqm all as specified procured from any one of the approved manufacturer's instructions |
| 85 | M&L 10mm thick bedding layer in CM 1:4 on roof top surfaces mixed with integral WPC 2% by weight of cement and finishing the same even and smooth without using extra cement etc complete all as specified and directed. |
| 86 | M & L for Aappling two coat of aluminium paint @ 0.15 Kg/Sqm over membrane over roof surfaces complete all as per manufacturer's instructions and as directed . |
| 87 | M&L for 75mm thick PCC 1:3:6 type C-1 (using 20mm graded stone aggregate as in plinth protection/path without using extra cement,laid in panels including necessary formwork,inishing even and fair complete all as specified and directed.. |
| 88 | M&L for 5 mm thick cement plaster in CM (1:3) on concrete surfaces of ceiling and finishing the surface even and smooth (without using extra cement) etc complete all as specified and directed. |
| 89 | S&F 600mmx450mm bevelled edge mirror of selected quality glass,mounted on 6mm thick commercial plywood and fixed to wooden plug with chromiuum matched brass screws complete all as specified and directed. |
| 90 | S&F 110 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors etc complete all as directed. |
| 91 | S&F glazed earthen ware viterious china wash basin white coloured flat back size 550x400mm, outlet of 32mm bore HDPE outlet pipe with necessary fittings, 32mm bore brass CP waste couplings etc complete all as directed. |
| 92 | S&F Vitrous china white soap dish size 160mm160mm90mm fixed with screws and wooden/plastic cleats etc complete all as directed. |
| 93 | M & L RCC Hume pipe septic tank 10 users On site Hume Pipe septic tank designed to carry sewage and sullage water, excavation in any type of soil, PCC 1:4:8 below foundation, Vent shaft, connection etc., complete all as specified and directed. |
| 94 | m & L Soakage wells excavation, in any type of soil, foundation in PCC 1:3:6, walls of honey combed masonry with top ring of M25 concrete including intercepting chamber and screen chamber made of Brick masonary in CM, RCC cover slab in M25/ SFRC cover, interconnecting pipes of RCC/DWC complete filled with brick bats of size 1.20m diax3.00m depth. complete all as specified and directed. |
| 95 | M&L for moorum/red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick, spread, levelled and rammed including watering etc complete all as directed. |
| 96 | M&L for 15mm thick cement plaster in Cement motar1:4 on fair faces of brick or concrete work and finishing the surface even and fair (without using extra cement) incl WPC @3% weight of cement etc. complete all as specified and directed. Note-WPC will be measured and paid separately under appropriate items . complete all as specified and directed. |
| 97 | M&L for preparation of newly plastered wall surface and applying two coats of cement base paint over a coat of alkali resistant primer complete all as specified and directed. |
| 98 | M&L for 10mm thick rendering internally in CM 1:6 on fair faces of brickwork or concrete surfaces finished finished even and smooth (without using extra lime or cement) etc complete all as specified and directed. |
| 99 | M&L for wall care putty of 2mm thickness over plastered/Unplastered surface to prepare the surface even and smooth complete all as specified and directed.Note-Entire spalashes in floor shall be cleaned immediately after completion of periodical services. |
| 100 | M&L for preparation of newly plastered surfaces of walls and applying one coat of alkali resistant primer over two coats of oil emulsion distemper etc complete all as directed. |
| 101 | M&L vetrified tiles 8 to 9 mm thick, in (Square/rectangular) polished,light shade area of each tile not exceeding 0.36 sqm, in floors etc. set & jointed in neat cement slurry and pointed in coloured cement to match , coloured tiles laid over and including 15 mm thick screed bed or bedding layer in Cement motar complete all as specfied and directed. |
| 102 | M&L Non skid ceramic coloured tiles 7 to 8 mm thick (Square/rectangular) area of each tile exceeding 0. 11 sqm but not exceeding 0.18 sqm, in floors etc. laid over 15mm thick screed bed in cement mortar 1:6 and jointed in neat cement slurry and pointed in white or coloured cement to match etc complete all as specified and directed. |
| 103 | M&L for Glazed ceramic coloured tiles of size 300mm x 450 mm x 7mm thick verticale tiles with highlighter any colour on vertical surface such as skirting, dados, risers to steps etc set & jointed in neat cement slurry and pointed in white or coloured cement to match over and including rendering 10mm thick in cement mortar (1:4) , complete all as specified and directed. |
| 104 | M&L for Granite 18-20 mm thick (table rubbed and polished) in steps, treads, risers, jambs, pillars, window cills, cooking platforms, wash basin platform, treads, risers and like laid in cement 15 mm thick cement mortar 1:4 including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite rounding to edges of granite stone slabs one edge such as in counter type WHB platform etc complete all as specified and directed. |
| 105 | S&F sinks with drainage board made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm etc complete all as directed. |
| 106 | Supply and fixing in repair PVC waste pipe 32/38/40mm dia, 600 to 750mm long complete all as specified. |
| 107 | M&L for mild steel work tubular pipes as in stanchions incl special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I.S.1161-1979 grade St.-240 etc. complete all as specified and directed.. |
| 108 | S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified etc complete all as specified and directed. |
| 109 | S & F Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.47 to 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering including ridges /cladding to wall,fixed with self tapping screws as specified and directed. |
| 110 | Providing cement concrete Type B0 1:2:4 (12.50mm aggregate) in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs not provided for in Item 04028, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, as directed |
| 111 | S&F coloured powder coated (50 micron) aluminium sections any type for doors,windows, ventilators frames including joining cleat for fixing etc. complete all as specified and directed. |
| 112 | S&F coloured powder coated (50 micron) aluminium door shutters, aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified and directed.. |
| 113 | S & F 5.50 mm thick sheet glass fixed in window shutters etc complete all as specified and directed.. |
| 114 | S&F aluminium powder coated shutter (for window and ventilator) side hung type without sash, aluminium section wighing 0.55 kg/m including necessary jointing cleats,glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fitting such as peg stays 150mm long (1 no.) hinges type B-21 100mm long( 2 no) suitable handle (1 no) complete all as specified and directed. |
| 115 | S&F Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main bodywith stainless steel cover,governing pivot made of brass, other parts made of mild steelheavy duty and fixed .complete all as specified and directed. |
| 116 | S&F aluminium anodised barrel tower bolts 150 mm size of extruded section and fixed ISI marked complete all as specified and directed. |
| 117 | S&F aluminium alloy, anodised, sliding door bolt 250 mm size with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast Aluminium alloy complete all as specified and directed. |
| 118 | M&L for Gypsum board panel 12 mm thick as in ceiling including T, L & Channel section accessory of galvenised mild steel, GI suspender all as per manufacturer design confirming to IS 2095 and IS 2542 – 1981. Weight of board not less than 7 Kg per Sqm including two coat of Oil bound distemper over a coat of plaster of paris incl framing complete all as specified and directed. Note: - Rate quoted shall be deemed to be inclusive of gypsum board, frame work and suspender. |
| 119 | Supply and fix sheet glass shelf assembly consisting of 5.50mm thick sheet glass shelf 12cm wide with cromium plated bracket guard and and railing 60cm long including taking down old broken glass shelf, if available, complete all as specified and directed. |
| 120 | S&F in repair looking mirror 600x450mm selected quality beveled edges 5mm thick incl aluminium frame mounted on 5mm thick block board brracket and fixing arrangement as directed. |
| 121 | S&F in repair Vitreous china ware counter ovel wash hand basin, any colour, size 570 x 450 mm size fixing in slab including fixing waste pipe , CP waste coupling all as specified and approved by Enger-in-Charge |
| 122 | M&L for 1:4:8 type D-2 (40mm graded stone aggregate)Concrete bed to drain pipes including forming cradles against the sides of pipe after they are laid and tested for 150 mm bore of pipe etc complete all as specified and as directed. |
| 123 | S&F Machine pressed coloured precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness M-35 Grade over 25mm thick sand cushioning and joint filled with dry sand mortar 1:4, incl dismantling of stone slab and tiles of any description of thickness in floors/aprons etc complete all as spd and directed. Please Enable Macros to View BoQ information |
| 124 | S&F Machine pressed coloured precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness M-35 Grade over 25mm thick sand cushioning and joint filled with dry sand mortar 1:4, incl dismantling of stone slab and tiles of any description of thickness in floors/aprons etc complete all as spd and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 17, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 07, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 4 daysNov 10, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 7 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender