Tender For special Repairs To Septic Tank, Soakage Well An Toilet Block (05 Nos) In Blg No P-100 Of Rashtriya Military School Ajmer
Tender Value
Ref. Documents
Estimated cost
Bid Submission
05 Nov 2026
12 days left
EMD
52000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Ajmer → Rajasthan
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for special Repairs To Septic Tank, Soakage Well An Toilet Block (05 Nos) In Blg No P-100 Of Rashtriya Military School Ajmer
BOQ
| Sl. No. | Item Description |
| 1 | Demolition of Lime concrete (unreinforced) in ground floor and pavings not exceeding 15cm thickness below or above ground level and removing material from site complete all as specified and directed. |
| 2 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed. |
| 3 | Taking down chowkats or frames area not exceeding 1.50 Sqm (w/o taking off shutters from frames) and removing from site, complete all as specified and as directed. |
| 4 | Taking down chowkats or frames area exceeding 1.50 Sqm and not exceeding 4.00 Sqm (w/o taking off shutters from frames) and removing from site, complete all as specified and as directed. |
| 5 | Material & Labour for Non - skid coloured ceramic tiles 400x400x 7 to 8 mm thick (square), in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in cement mortar 1:6 complete all as specified and directed. |
| 6 | Material & Labour for Coloured glazed ceramic tiles in vertical surface 300x 450x 7-8 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match including 10mm thick cement plaster in cement mortar 1:4 as backing coat on fair faces on stone surface all as specified and directed. |
| 7 | Material & Labour for Granite work 18 to 20mm thick (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms, counter basins, urinal partitions etc. and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade of following types and including 15mm thick screed bed in CM 1:6 set and jointed in neat cement slurry and pointed in coloured cement to match the surfaces and half nose moulding (bull nosing) etc, complete all as specified and directed. |
| 8 | Supply and fixing, made 100% Solid WPC (Wood Polymer Composite) Door Frames of cross section 45 mm x 70 mm (moulded) having single rebated made from Wood Polymer Composite (Single Extruded Process) material comprising of virgin PVC polymer of K-Value 57-60 (Suspension Grade), calcium carbonate and natural fibres (wood powder/ruce husk/wheat husk)and non toxic additives fabricated with meter joints after applying PVC solvent cement & screwed with full body treated star headed screws having minimum frame density of 780 Kg/cbm & manufactured by \\"Rajshri/Echon or Eq\\" an ISO 9001-2015 certified company, having good screw holding capacity (Screw withdrawal strength of (Min, 990N) Minimum compressive strength of 58 N/mm2, modulus of elasticity 900N/mm2 and resistance to spread of flame of class A category with property of being termite/borer prof, water/moisture proof & fire retardant & fixed in position with and including SS Dsh Fasteners/Hold Fast of required dia and length, all as per specifications drawings as directed,. Material test certificate and authentication should be compoulsory provided by the manufacturing company.complete all as specified and directed. |
| 9 | S&F factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 30mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N / m2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fie retardant WPC to be laminated with PVC foil of minimum 14 micron thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk SS screws, complete all as specified and directed..Note : Stainless steel butt hinges and necessary SS screws shall be paid separately). |
| 10 | Supply & fixed 200 mm long aluminium anbodised barrel tower bolts of extruded section and fixed complete all as specified and directed. |
| 11 | Supply & fixed 150 mm long 10mm dia Extruded aluminium alloy handles, fabricated type anodised complete all as specified and directed. |
| 12 | Supply & fixed 100 mm butt hinges, medium weight cold rolled mild steel and fixed complete all as specified and directed. |
| 13 | S&F alluminum alloy, anodised, cast type or extruded section, sliding door bolt with hasp & staple (bolt type) with fixing clips and bolts and 300 mm long complete all as specified. |
| 14 | Demolition of brickwork or stone/boulder masanory,laid dry below or above ground level and removing material from site complete all as specified and directed. |
| 15 | Material & Labour brick work with old size fly ash bricks straight or curved on plan exc. 6 M mean radius built in CM 1:6.complete all as specified and directed. |
| 16 | Material & Labour for Brickwork with fly ash bricks, straight or curved on plan to any radius in half brick thick walls, built in cement mortar 1:4 complete all as specified and as directed. |
| 17 | Taking down cement plaster from brick walls/stone masonry walls, concrete surfaces including raking out joints, hacking for keys, scrubbing down with water etc complete all as specified and as directed. |
| 18 | Material and labour 10 mm thick cement plaster in cement mortar 1:3 on ceiling, finished even and smooth without using extra cement all as specified and directed. |
| 19 | Material and labour for 15mm thick rendering in cement mortar (1:6) on brick/stone masonry or concrete surfaces (internal walls) of any description, finished the surface even and smooth without using extra cement complete all as specified. |
| 20 | Material and labour for preparation of newly/old plastered surface of ceiling and applying three coats of white wash complete all as specified and directed. |
| 21 | M&L for preparation of newly plastered surfaces of wall and applying two coats of oil bound distemper paint over a coat of 1mm thick putty complete all as specified and directed. |
| 22 | M&L for preparation of old plastered or un-plastered surface including brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and applying two coats of oil bound distemper on walls over a coat of 1mm thick putty complete all as specified and directed. |
| 23 | M&L for two coat of synthetic enamel painting to steel surface of any description, not otherwise described over 10cm width or girth including preparation of new surfaces over a coat of red oxide primer complete all as specified and directed. |
| 24 | Demolition and breaking up of rain water pipe /UPVC pipe line 100mm/75mm dia incl all fittings, complete all as specified and directed. |
| 25 | Supply & Fixed for 110mm dia UPVC, soil waste drain pipe, type ‘A’ , conforming to IS 13592-1992, single socketed, in any length with rubber rings joints or jointed with solvent cement joint, laid in floors or walls etc complete all as specified and directed.(Note- Rubber rings for pipes and fittings shall be conforming to IS 5382-1985) |
| 26 | Supply & Fixed for 75 mm dia UPVC, soil waste drain pipe, type ‘A’ , conforming to IS 13592-1992, single socketed, in any length with rubber rings joints or jointed with solvent cement joint fixed to wall/floors etc complete all as specified and directed.(Note- Rubber rings for pipes and fittings shall be conforming to IS 5382-1985) |
| 27 | Supply & Fixed for 110 mm bore UPVC (SWR) bend with access door including jointing with solvent cement, complete all as specified and directed..(Note- UPVC bends shall be conforming to BS 4515 DIN 19531 and DIN 19534) |
| 28 | Supply & Fixed 110 mm bore UPVC (SWR) ( singleT) equal or unequal including jointing with solvent cement complete all as specified and directed. |
| 29 | Supply & Fixed 110 mm bore UPVC (SWR) branch piece,single ( singleY) equal or unequal including jointing with solvent complete all as specified and directed. |
| 30 | Supply & Fixed for 75 mm bore UPVC (SWR) bend including jointing with solvent cement, complete all as specified and directed..(Note- UPVC bends shall be conforming to BS 4515 DIN 19531 and DIN 19534) |
| 31 | S&F PVC (SWR) 75 mm bore branch piece (Tee) fixed to walls with cement joint with or w/o ovel access door complete all as specified and directed. |
| 32 | S&F PVC (SWR) 110 mm bore PVC (SWR) vent cowl complete all as specified and directed. |
| 33 | S&F PVC (SWR) 75 mm bore PVC (SWR) vent cowl complete all as specified and directed. |
| 34 | Material and labour in repairs 75mm diaPVC (SWR) floor trap with grating including jointing to waste pipe fixed in cement concrete type-B-1 (1:2:4) using 12.5mm brick aggregate complete all as specified and directed. |
| 35 | Material and labour in repairs PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement including jointing to waste pipe fixed in cement concrete type-B-1 (1:2:4) using 12.5mm brick aggregate complete all as specified and directed. |
| 36 | Supply and fixing brass chromium plated tubular towel rail 20mm dia 'D' type 60cm long between flanges complete all as specified and directed. |
| 37 | Supply & fixed in repair for 5.5mm thick looking mirror of selected quality, bevelled edge 600mmx450mm glass mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plug with chromium plated brass screw and cup washer, pvc beading & rubber packing complete all as specified and directed. |
| 38 | Supply and fixing low density polyethylene pipe connection with PTMT nuts suitable for 15 mm bore GI pipe 450 mm long of pressure rating 6 kg/cm² including brass union and washer ateach end, one end screwed to inlet of piller tap/cistern and other end to stop cock etc complete all as specified and directed. |
| 39 | Supply and fixing in repairs Vitreous China counter below W.H.B. white of size 570 x 445 mm, incl waste pipe and brackets etc complete all specified and all directed. |
| 40 | Supply and fixing in repairs Chromium plated brass pillar tap of size 15 mm in WHB/Kitcen sink etc complete all specified and all directed. |
| 41 | S & F in repairs Vitreous China, Squatting pan Orissa pattern size 580X440mm, white with integral foot rests (excluding flushing cistern and flush pipe ) with Vitreous China ‘P’ or ‘S’ trap, front or back inlet including connection to trap and to flushing pipe, anti syphonage pipe and making good the floor to match the existing complete all as specified and directed. |
| 42 | Supply and fixing in repairs vitreous china premium quality/1st quality wash down water closet EWC with complete one set white ( incl all necessary accesories like rag bolts/gel gasket etc.(excluding flushing cistern & flush pipe ) with ‘P’ or ‘S’ trap of dia 100mm including provn of cement concrete bedding complete all as specified and directed. |
| 43 | Supply & fixed Polymer coloured (Polypropeylene Delrin and ABS) low level flushing cistern 10 Ltr capacity, valveless syphonic action type complete with inlet ball valve float valve bends brackets, rawl plug, brass screws handle etc complete having BIS derscription mark with 2731 with and including suitable size of MS brackets, plug, screws all as required incl taking down existing high level/low level flushing cistern any type disconnecting pipes and jointing with new one etc and making good the floors/walls as per existing floor finish/wall finish including 32 mm bore PVC flush pipe and jointing with Water closet of any type complete all as specified and directed. |
| 44 | Supply and fixing plastic water closet seat white, closed pattern with flat bottom and cover and mild steel C.P. or Aluminum hinging device complete all as specified and directed. |
| 45 | Supply & fixed in repair fancy type shower rose125mm dia size of Rim and 30cm long CP brass pipe with swiwel joint complete all as specified and directed. |
| 46 | Supply and fixing in repair 15mm bore angle valves cast copper alloy screwed down high pressure with crutch or butter fly handles screwed both ends for iron pipe or for union complete all as specified and directed. |
| 47 | Supply and fixing (in repair) stop valves concealed type, 15mm dia chromium plated, cast copper alloy, screwed down, high pressure with crutch or butter fly handle, screwed both ends for iron pipes or unions complete all as specified and directed. |
| 48 | Supply and fixing in repairs 15mm bore long body bib tap with wall flange cast copper alloy CP with crutch or butterfly handles screwed down for iron pipes or for brass ferrule of jaquar cat part No CON-107KN complete all as specified and directed. |
| 49 | Supply and fixing in repair CP brass soap dish holder of jaquar cat part No-ACN-1131N or equivalent as per Appx B of make list complete all as specified and directed. |
| 50 | Taking up or down 15mm dia steel tubing and connections by disconnecting fittings/tubing from existing tubing removal from site complete all as specified and directed. |
| 51 | Taking up or down 20 mm dia steel tubing and connections by disconnecting fittings/tubing from existing tubing removal from site complete all as specified and directed. |
| 52 | Supplying and laying of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings 16mm dia bore on walls/ceiling or laying in floors or fixing as in concealed to walls or in floors etc, and making good the surfaces matching to exsiting surfaces of walls/ floor complete all as specified and directed. |
| 53 | All as per item No 52.00 above but 20mm dia bore, complete all as specified and directed. |
| 54 | S&F Jet flush including plate & PVC connection complete all as specified and directed. |
| 55 | Provinding lowering, laying, aligning, fixing in position and joining at all level/ depths full round HDPE DWC (Duble wall corrugated) 150 mm dia pipes with reqd jointing accessories of SN-8 grade as per IS 16098 (Part 2) amended upto date in trenches in complete including all material, labour, sectional hydrotesting (including the cost and conveyance of water to site fortesting) and Comissioning as per manufacturer instructions complete all as specified and directed. |
| 56 | Demolition of Reinforced cement concrete pipe of 150mm dia of any description and in any position complete all as specified and directed. |
| 57 | M&L for PCC (1:3:6) type C-2 using 20mm graded stone aggregare for packing under & haunching against the sides of drain pipe after they are laid and tested for 150mm bore pipe complete all as specified and directed. |
| 58 | Material & Labour for plain Cement concrete 1:3:6 type C-2 (Using 40mm graded stone aggregates) in foundation, filling and mass concrete complete all as specified and directed. |
| 59 | Material & labour for PCC 1:2:4 type B-1 ( using 20mm graded mechanically crushed stone aggregate) as in bed blocks, copings, surface channels, apex stones etc and like including weathering,slightly rounded or chamfered angles as directed including all form work and finishing all exposed surfaces complete all as specified and directed. |
| 60 | Material and Labour for 15mm thick rendering on fair faces of brick work, concrete surfaces or stone walls in CM (1:4) finished even and fair(without using extra cement), complete all as specified and directed. |
| 61 | Material & Labour for Precast cement concrete 1:2:4 type B-1 (Using 20mm graded stone aggregates as in manholes cover slabscasted at site and set in cement mortar 1:4 complete all as specified and directed. |
| 62 | Material & Labour mild steel TMT bar(Fe 500) 10 mm dia and over, cut to length, bent to shape required and binding with MS wire (annealed) not less than 0.9mm dia all securing with clips all as spd and directed. |
| 63 | Construction of Brick septic tank of 200 Users with provn of excavation,in any type of soil ,foundation in PCC 1:4:8 walls of fly ash bricjk masonary with top cover of M25 concrete incl intecepting chamber and screen chamber made of brick masonary in CM, RCC cover slab in M25/SFRC cover interconnecting pipes of RCI complete as specified (TD No-CEBZ/TD/76/2011) incl demolition of old septic tank complete all as specified and directed. |
| 64 | Construction of soakage well excavation, in any type of soil, foundation in PCC 1:3:6 walls of honey combed masonry with top ring of M-25 concrete including intercepting chamber and screen chamber made of brick masonry in CM. RCC cover slab in M-25/SFRC cover, interconnecting pipes of RCC/DWC complete filled with brick bats of size 1.2Mdia x 3.0M effective depth as specified (TD No-CEBZ/TD/78/2011) incl demolition of old soakage well all as spd and directed. |
| 65 | Demolition of RCC slab below or above ground level and removing material from site complete all as specified and directed. |
| 66 | Excavating in trenches not exceeding 1.5 meters wide and not exceeding 1.5 meters deep for pipe line or for manholes not exc 10 sqm on plan and not exceeding 1.5m depth in all kind of soil and getting out complete all as specified and directed. |
| 67 | Removal of excavated material (soil) to a distance not exceeding 250 metres and depositing where directed at a level not exceeding 1.5 m above the starting point complete all as specified and directed. |
| 68 | Returning, filling in(soil) including spreading, leveling, watering and well ramming in layers not exceeding 25cms thick in any type of soil complete all as specified and directed. |
| 69 | Taking down carefully aluminium/copper point wiring (light,fan,socket or power) of any type complete including fittings and fixtures such as switches,ceiling roses, pendants, holders , sockets, light fittings, removing materials to store for keeping in safe custody or for taking credit and making good the disturbed surfaces of walls/ceiling/floor at various site etc, complete all as specified and directed. |
| 70 | Disconnecting of unserviceable sub main wiring of any size including conduit of any type and accessories & removing from site and making good the disturbed surfaces, complete all as specified and directed. |
| 71 | Disconnecting electric connections and taking down old unserviceable MCB DBs/Sheet Metal Enclosure of any type including MCBs DB/TPN DBs including mcbs of any capacity,complete all as specified and directed. |
| 72 | Taking down existing exhaust fan re use at site or carrying to the store(To be measured only when found serviceable in all respects complete for re use.) complete all as specified and directed |
| 73 | M&L for point wiring with 1.5 Sqmm. (nominal area) single core PVC insulated 1100 Volts, grade multi stranded FRLS copper conductor unsheathed in and including non metallic rigid PVC concealed conduit 20 mm dia or higher complete with all PVC conduit accessories such as socket, elbow, junction box, bell mouth, reducer, bend and flexible conduit etc./ fittings ISI marked and sunk type pressed steel anodised terminal box with bakelite laminated sheet top cover 3 mm thick, brass screws and cup washers including one green colour cable of same size as earth wire up to common earth and connected to earth dolly complete all as specified and directed. |
| 74 | One light point/bell point controlled by one way 5 Amps single pole switch, complete all as specified and directed. |
| 75 | One ceiling fan/exhaust fan point controlled by one way 5 Amps single pole switch, complete all as specified and directed. |
| 76 | One 5 pin 5 Amps socket outlet on same board with other switch, complete all as specified and directed. |
| 77 | All as per item No 73.00 above but with 2.5 Sqmm single core multi stranded PVC insulated unsheathed (FRLS) cable for 15 Amp socket outlet on independent board, complete all as specified and directed. |
| 78 | Supply and fixing of switch piano type, flush button single pole, one way 5 Amps, complete all as specified and directed. |
| 79 | Supply and fixing of switch piano flush type 15/16 amps, single pole one way 240 volts complete all as specified and directed. |
| 80 | Supply and fixing of socket outlet 5 Amps, 5 Pin, flush type, complete all as specified and directed. |
| 81 | Supply and fixing of socket out let 2 in 1,multipurpose 3 pin 15/16 Amp flush type complete all, as specified & directed. |
| 82 | Supply and fixing of ceiling rose,surface type bakelite 65x17.5 mm, three terminals, complete all as specified and directed. |
| 83 | S&F in repair LED tube light fitting in acrylic linear tube (1x18 watt),230V for single LED tube light including 1 x 18 W LED retrofit bar professional CW 6500 K cover channel, bipin holders,LED power driver, connector block, etc complete with all accessories internally prewired and including connecting up with three core flexible copper conductor cable with suitable size for connection of fitting from ceiling rose complete all as specified and directed. |
| 84 | Supply and fixing in repair LED mirror light fitting, 10 watt, 600 mm length complete with all accessories pre-wired and including connecting up with flexible copper conductor cable with suitable size complete all as specified and directed. |
| 85 | Taking down existing geyser carrying to the store and S&F installation, testing and commissioning of new water heater storage type outer ABC body, electric suitable for single phase ,50HZ, AC supply, 2 KW heating element , with safety fusible plug confirming to relevant IS of 25 ltrs capacity 5 star rated, Horizontal fixed with fastner of 6 inches set of 4 and with connection pipes of stainless steel SS 304 grade pack of with PTMT nuts of length 24 Inches and testing complete all as specified and directed. |
| 86 | S&F exhaust Fans AC single phase 230/240 volts of size 300 mm sweep steel body with louver including connecting with three core flexible copper wire from ceiling rose to connector of fan complete all as specified and directed. |
| 87 | S&F of sub main wiring with two runs of single core PVC insulated and unsheathed multistranded (FRLS) copper conductor cable of size 6.00 Sqmm LT, 1100 volts grade, drawn through and including 25 mm dia or higher PVC non metallic concealed conduit with accessories such as socket, elbow, junction box, bell mouth, reducer, bend and flexible conduit etc. and fittings and one run of 6 sqmm single core multistranded copper conductor cable green colour as earth continuity conductor complete all as specified and directed. |
| 88 | S&F of sub main wiring with two runs of single core PVC insulated and unsheathed multistranded (FRLS) copper conductor cable of size 4.00 Sqmm LT, 1100 volts grade, drawn through and including 25 mm dia or higher PVC non metallic concealed conduit with accessories such as socket, elbow, junction box, bell mouth, reducer, bend and flexible conduit etc. and fittings and one run of 4 sqmm single core multistranded copper conductor cable green colour as earth continuity conductor complete all as specified and directed. |
| 89 | S & F of MCB SP, 240 volt, 6 Amp to 32 Amp capacity, 10 KA, 'C' Type instantaneous tripping complete all as specified and directed. |
| 90 | Supply and fixing of MCB SPN 10 to 40 Amp capacity, 10KA , 'C' Type instantaneous tripping complete all as specified and directed. |
| 91 | Supply and fixing of MCB SPN 63 Amp capacity, 10 KA , 'C' Type instantaneous tripping complete all as specified and directed. |
| 92 | Supply and fixing of MCB TPN 63 Amp capacity,415 volt 10 KA , 'C' Type instantaneous tripping complete all as specified and directed. |
| 93 | S&F MCB distribution board single pole & neutral with 200 Amps rated bus bar, double door, IP-43, DB's made out of CRCA sheet steel enclosure, recessed type, factory made powder coated, 8 way, 240 volts suitable for housing MCB's and isolator's complete in all fixing material/accessories etc complete all as specified and directed.Note : MCB DB and MCB will be the same make. |
| 94 | S&F MCB distribution board Tripple pole & neutral with 200 Amps rated bus bar, double door, IP-43, DB's made out of CRCA sheet steel enclosure, recessed type, factory made powder coated, 4 way, 240 volts suitable for housing MCB's and isolator's complete in all fixing material/accessories etc complete all as specified and directed.Note : MCB DB and MCB will be the same make. |
| 95 | M & L for earthling complete with GI earth plate electrode 60 cm x 60 cm x 6 mm thick, buried directly in ground (earth pit not less than 2.25 mtr deep below normal ground level) with top edge of the plate not less than 1.5 mtrs below normal ground level connected to GI lead wire 4.00 mm dia by means of bolts, nuts, check nuts and washers of galvanized iron or steel all as shown in electric plate No 3 of SSR Part-I connected to continuous earth wire on main switch board all as specified or indicated and testing on completion including provision of earth wire protection by 15 mm dia medium grade GI pipe and watering pipe shall be 20 mm bore, medium grade including excavation & earth work in any type of soil & disposal of soi, providing alternate layers of charcoal and common salt, constr of PCC earth chamber in mix 1:3:6 type C-1 with 40mm thick RCC 1:2:4 type B-1 cover with handle made out oof 8mm dia bars, watering arrangement with funnel & wire mesh, complete all as specified and directed. Note. The unit rate includes for protection pipe and GI wire 4.00 mm from top of earth plate up to 7.5 meter above ground level. |
| 96 | S & F in repair single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole 20 Amp MCB SP `C' type instantaneous for geyser & AC complete all as specified and directed. |
| 97 | Taking out old unserviceable pipe line alongwith fittings from existing connections of size 20 mm dia complete all as specified and directed. |
| 98 | Supply & Laying in trenches galvanised steel water tubing of medium grade with all fittings such as bends, elbows, tees, unions, nipples, short pieces etc as required at site of size 25 mm dia complete all as specified and directed. |
| 99 | S&F gun metal gate valves with iron wheel head screwed at both ends for iron pipes complete including dismantling of old unserviceable gate valve fixed at any location of Size 20 mm dia complete all as specified and directed. |
| 100 | Taking up/down worn out/damaged/unserviceable xlpe /PVC insulated underground cable rmoured, heavy duty with aluminium conductors of any size, 1100 Volt grade from trench/duct/pole/wall/ pipes/rooftops etc. complete all as specified and directed. |
| 101 | Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 16 sq mm 4 core complete all as specified and directed. |
| 102 | M&L bricks for protection cover to under ground cable (with old size sub class 'B' bricks) laid flat abutting each other with width of protection being equal to length of brick. The gap between should not exceed 10 mm as complete all as specified and directed. |
| 103 | M&L for dry river sand and punning for cushioning and cover for protection of under ground electric cable complete all as specified and as directed. |
| 104 | Supply and fixing tubes light grade GI tubing 40 mm dia with all fitting laid in trenches, fixed on pole/on wall for cable protection complete all as specified and directed. Please Enable Macros to View BoQ information |
| 105 | Supply and fixing tubes light grade GI tubing 40 mm dia with all fitting laid in trenches, fixed on pole/on wall for cable protection complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 17, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 05, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 12 daysNov 07, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 14 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender