Tender For special Repair Works To Ors Govt Md Accn Block No P-142/(01 To 08) (Total 08 Qtrs) At Clyde Barrack And Certain Other Works Under Ge (West) Bareilly
Tender Value
46.68 Lakhs
Estimated cost
Bid Submission
07 Nov 2026
11 days left
EMD
93000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Bareilly → Uttar Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for special Repair Works To Ors Govt Md Accn Block No P-142/(01 To 08) (Total 08 Qtrs) At Clyde Barrack And Certain Other Works Under Ge (West) Bareilly
BOQ
| Sl. No. | Item Description |
| 1 | Demolition of cement concrete (un reinforced) in ground floor and paving n. exc 15 cm thickness (below or above ground level) complete all as specified and as directed. |
| 2 | Demolition of cement concrete in reinforced(reinforcement cut as required to facilitate demolition) in ground floor and paving n. exc 15 cm thickness complete all as specified and as directed. |
| 3 | M&L for brick work with old size fly ash bricks, straight or curved on plan exc. 6 m mean radius, built in CM (1:6) including demolition of brick work in cement mortar including all quoins, arches, pillars etccomplete all as specified and directed. |
| 4 | M&L for 15mm thick rendering on internal surface in cement mortar 1:6 to on brick masonary wall surfaces or on other than fair faces of brick masonary finished even and fair without using extra cement including taking down old cement plaster complete all as specified and directed. |
| 5 | M & L for 15 mm thick rendering on external surface on fair faces of brick work or concrete surfaces with cement mortar 1:4 with mixing of water proofing compound as per manufacturer’s instructions including taking down old cement plaster complete all as specified and directed.Note:- Water Proofing compound shall be measured and paid seprately. |
| 6 | Supply only liquid water proofing compounding complete all as specified and directed. |
| 7 | M&L for rendering 5 mm thick in CM 1:3 as on concerete surface on ceilings finished even and smooth without using extra cement complete all as specified and directed. |
| 8 | M & L for applying two coat of oil bound distemper white or tinted on newly decorated or undecorated wall surface including preparation of surfaces and over and including M&L for 2 mm thick putty by washing rubbing down and stoping of distempered and painted surfaces complete all as specified and directed. |
| 9 | M & L for applying two coat of oil bound distemper white or tinted on old decorated wall surface including preparation and over and including M&L for 2 mm thick putty of surfaces by washing rubbing down and stoping of distempered and painted surfaces complete all as specified and directed. |
| 10 | M&L for preparation of new plastered walls surfaces and applying two coats of Cement based paint paint over a coat of 2mm thick wall care putty complete all as specified and directed. |
| 11 | M&L One coat of cement base paint on old plastered wall surfaces over a coat of 2mm thick wall care putty of any description including preparation of surfaces, complete all as specified |
| 12 | M&L for preparing new plastered surfaces and applying three coats of white wash on ceiling complete all as specified and directed. |
| 13 | M&L for preparing old plastered surfaces and applying one coats of white wash on ceiling complete all as specified and directed. |
| 14 | M&L for 25 mm thick cement concrete type B0, 1:2:4 (using 12.5 mm graded stone aggregate) in floors, finished rough to receive floor tiles complete all as specified and directed |
| 15 | M&L non skid ceramic vitrified double charged coloured tiles 7mm to 8 mm thick (Square/ rectangular ) area of each tile in floors etc.area of each tiles exc 0.18 sqm but not exceeding 0.38 sqm set and jointed in neat cement slurry and pointed in white or colour cement to match, over and including M&L for 15 mm thick screed plaster in CM 1:6 and dismantling of existing floor, or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premisescomplete all as specfied and directed. |
| 16 | All as per serial item as 14 above but as in vertical surfaces including M&L for rendering 10 mm thick in cement mortar 1:4, as in backing layer complete all as specified and directed. |
| 17 | M&L for non-skid coloured ceramic tiles 7mm to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 (400x400) sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including M&L for 15 mm thick bedding layer of mortar and including M&L for , 15 mm thick in cement mortar 1:6 complete all as specified and directed. |
| 18 | M&L for Glazed ceramic tiles in vertical surface 450mmX 350mmX 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match including M&L for 15 mm thick in cement mortar 1:4 rendering finished even and smooth of mortar, including dismantling of existing wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed. |
| 19 | M&L for 18mm-20 mm thick Granite work (table rubbed and polished) in steps, jambs, pillars, window-cills, door cills cooking platforms and like in cement mortar (1:4) including moulding , pointing in white cement (1:2) using marble dust with admixture of pigment to match with and like in cement mortar (1:4) including form work , pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite with full round bull nosing edging including dismenteling of existing floor, hearth or wall tiling complete all as spd as directed.(shade and coloured of granite will be approved by Engr-in-charge) |
| 20 | M & L for Kota stone slab 18mm-20mm thick full length in single peice without joint in floor , riser of steps, skirting, dado and pillar laid over cement screed and jointed with grey cement slurry mixed with pigment to match the shade including necessary grinding, rubbing and polishing (mirror finish) and bullnosing over and including M&L for rendering of 15 mm thick CM 1:4 complete all as specified and directed. |
| 21 | M&L for 50 mm thick cement concrete 1:3:6, type C1, with using 20 mm graded stone aggregate in floor/plinth protection, finish the surface even and smooth without using extra cement including forming necessary joints 12 mm wide to the full depth of PCC at every 3 mtr and every change of direction and filling the same with bitumen filler 1:3 by weight complete all as specified and directed. |
| 22 | M&L Form work to soffits of suspended slabs/chajja flat surface of concrete finished rough surfaces of concrete not exceeding 200mm thick,complete all as specified and directed. |
| 23 | M&L for TMT Bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed. |
| 24 | M&L for RCC 1:2:4 type B1 using 20 mm graded stone aggregate as in slab supported on wall, beams and columuns in floors, roofs, shelves and stair case etc complete all as specified and directed. |
| 25 | M&L for RCC 1:2:4 type B1 using 20 mm graded stone aggregate as in Chajjas etc complete all as specified and directed. |
| 26 | Taking down Chowkats or frames with shutters (without taking off shutters from the frame) exc 1.50 sqm but n.exc 4.0 sqm each and removing from site including making good disturbed portions of wall with new or old bricks, lintel, cills etc in CM 1:4 complete all as specified and directed. |
| 27 | Taking down Chowkats or frames with shutters (without taking off shutters from the frame) n.exc 1.50 sqm each and removing from site including making good disturbed portions of wall with new or old bricks, lintel, cills etc in CM 1:4 complete all as specified and directed. |
| 28 | S&F 125mmx60mmx1.25mm thick pressed steel, frames for door with one or more rebates including filling and compaction with PCC (1:3:6) Type C-1 using 20 mm graded stone aggregate, necessary fixing lugs, hinges, lock strike plate, etc, complete including wooden texture finished paint on the frame surface complete all as specified and directed. |
| 29 | S&F 105mmx60mmx1.25mm thick pressed steel, frames for door with one or more rebates including filling and compaction with PCC (1:3:6) Type C-1 using 20 mm graded stone aggregate, necessary fixing lugs, hinges, lock strike plate, etc, including wooden texture finished paint on the frame surface complete all as specified and directed. Please Enable Macros to View BoQ information |
| 30 | S&F 105mmx60mmx1.25mm thick pressed steel, frames for door with one or more rebates including filling and compaction with PCC (1:3:6) Type C-1 using 20 mm graded stone aggregate, necessary fixing lugs, hinges, lock strike plate, etc, including wooden texture finished paint on the frame surface complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 17, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 07, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 11 daysNov 09, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 13 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender