Tender For Conversion Of Lt Overhead Conductor To Underground Lt Cable And Connected Works At Wksp, Tatra, Avn And Single Offrs Accn Under Ge Gurdaspur.
Tender Value
47 Lakhs
Estimated cost
Bid Submission
07 Nov 2026
17 days left
EMD
94000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Gurdaspur → Punjab
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Conversion Of Lt Overhead Conductor To Underground Lt Cable And Connected Works At Wksp, Tatra, Avn And Single Offrs Accn Under Ge Gurdaspur.
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling cross arms, channels, angle iron, clamps, nut, bolts, stay wire, stay assembly, GI wire, anti climbing devices etc complete all as specified and directed by Engineer-in-Charge. |
| 2 | Dismantling and taking down existing ACSR conductor of any size by opening the binding wire for LT electric poles complete all as specified and directed. |
| 3 | Taking down any type insulator complete all as specified and directed by Egineer-in-Charge. |
| 4 | Taking down PCC Pole 9 mtr complete all as specified and directed by Egineer-in-Charge. |
| 5 | Taking down any type of LT UG cable complete all as specified and directed by Egineer-in-Charge. |
| 6 | Excavation in trenches in soft/ loose soil including cutting road surfaces n.exc 1.5 mtr wide and n.exc. 1.5 mtr in depth for poles, stay, cable, pipe etc getting out complete all as specified and directed. |
| 7 | Removal of excavated soil to a distance not exceeding 50 mtrs and depositing where directed at a level not exceeding 1.5 mtr above the starting point complete all as specified and directed. |
| 8 | Returning, filling in, including spreading, leveling,watering and well ramming in layers n.exc 25 cm thick in soft loose soil all as specified. |
| 9 | Supply and laying burnt bricks sub class 'B' old size (compressive strength not less than 75 kg per sqcm) for protection of cable laid in trenches for under ground cable complete all as specified and directed. |
| 10 | M&L for sand cushioning in trenches using fine sand to under ground cable, laid in two layers 15 cm before laying the cable & 8 cm after laying the cable complete all as specified and directed. |
| 11 | S&F for cable protection GI tubing light grade fixed along the pole/ wall/ under road of size 40 mm bore with necessary clamps (where required) nut and bolts all as specified and directed by Engineer -in- Charge. Note :- Clamps, nut and bolt will be measured and paid for separately. |
| 12 | All as per Srl item No 11 above but size 80mm. |
| 13 | All as per Srl item No 11 above but size 50mm. |
| 14 | All as per Srl item No 11 above but size 40mm. |
| 15 | M&L for boring hole under the road/ hard standing using trenchesless complete all as specified and directed. |
| 16 | Supply, laying and testing cable XLPE insulated screened PVC bedded galvanised steel strip armoured electric power cables (heavy duty) 1100 volts grade with stranded aluminium conductor 6 Sqmm 4 core complete all as specified and directed. |
| 17 | Supply, laying and testing cable XLPE insulated screened PVC bedded galvanised steel strip armoured electric power cables (heavy duty) 1100 volts grade with stranded aluminium conductor 16 Sqmm 4 core complete all as specified and directed. |
| 18 | Supply, laying and testing cable XLPE insulated screened PVC bedded galvanised steel strip armoured electric power cables (heavy duty) 1100 volts grade with stranded aluminium conductor 25 Sqmm 4 core complete all as specified and directed. |
| 19 | Supply, laying and testing cable XLPE insulated screened PVC bedded galvanised steel strip armoured electric power cables (heavy duty) 1100 volts grade with stranded aluminium conductor 35 Sqmm 3.5 core complete all as specified and directed. |
| 20 | Supply, laying and testing cable XLPE insulated screened PVC bedded galvanised steel strip armoured electric power cables (heavy duty) 1100 volts grade with stranded aluminium conductor 50 Sqmm 3.5 core complete all as specified and directed. |
| 21 | Supply, laying and testing cable XLPE insulated screened PVC bedded galvanised steel strip armoured electric power cables (heavy duty) 1100 volts grade with stranded aluminium conductor 70 Sqmm 3.5 core complete all as specified and directed. |
| 22 | Supply, laying and testing cable XLPE insulated screened PVC bedded galvanised steel strip armoured electric power cables (heavy duty) 1100 volts grade with stranded aluminium conductor 240 Sqmm 3.5 core complete all as specified and directed. |
| 23 | Supply, laying and testing cable XLPE insulated screened PVC bedded galvanised steel strip armoured electric power cables (heavy duty) 1100 volts grade with stranded aluminium conductor 300 Sqmm 3.5 core complete all as specified and directed. |
| 24 | Supply, install, testing and commissioning and CPRI approved factory made outdoor type dust and vermin proof LT busbar panel board cubical double door hinged type compartmentlised of suitable size 415 volt, AC 50 Hz fabricated of CRCA sheet 3.15mm thick machine pressed and angle iron frame 40mm x 40mm x 6mm grouted in PCC blocks of size 200 x 200 x 300 mm of 1:2:4 type B-1 (using 20mm graded crushed stone aggregate) powder coated inside and outside complete including 4 pole aluminium bus bar of capacity 315 amps mounted on porcelain insulators and enclosed in chamber and connection from incoming and outgoing electric cable with suitable size thimbles/ lugs with openable shutters on both side comprising of following:-(i) MCCB 240 Amp capacity with adjustable and megnetic thermal release 4 pole 35KA repturing capacity - 01 No. ICU = 100% ICU. (ii) Busbar chamber of 315 Amp capacity busbar for in and out of the LT cables (minimum four cable in/ out provision to be provided). (ii) Digital volt meter 0-500 volt with selector switch, digital amp meter of capacity 0-250 Amp alongwith selector switches 3 x LED type indicator (RYB) 3 x 300/ 5 tape wound CT's 3 x SP MCBs of 6 Amp for protection of indicator - 01 No. |
| 25 | Supply, fixing, install, testing and commissioning factory made (CPRI approved) outdoor type dust and vermin proof LT panel board cubical double door hinged type compartmentlised of suitable size 415 volt, AC 50 Hz fabricated of CRCA sheet 3.15mm thick machine pressed and angle iron frame 40mm x 40mm x 6mm grouted in PCC block of size 200 x200 x300mm made of 1:2:4 type B-1 (using 20mm graded crushed stone aggregate) powder coated inside and outside complete including 4 pole aluminium bus bar of capacity 315 amps mounted on porcelain insulators and enclosed in chamber and connection from incoming and outgoing electric cable with suitable size thimbles/ lugs with openable shutters on both side comprising of following:-(i) MCCB 400 Amp capacity with adjustable and megnetic thermal release 4 pole 35KA repturing capacity - 01 No. ICU = 100% ICU. (ii) MCCB 200 Amp capacity with adjustable and megnetic thermal release 4 pole 35KA repturing capacity - 02 No. ICU = 100% ICU. (iii) Busbar chamber of 500Amp capacity busbar for in and out of the LT cables (minimum four cable in/ out provision to be provided). (iii) Digital volt meter 0-500 volt with selector switch, digital amp meter of capacity 0-250 Amp alongwith selector switches 3 x LED type indicator (RYB) 3 x 300/ 5 tape wound CT's 3 x SP MCBs of 6 Amp for protection of indicator - 01 No. |
| 26 | M&L for earthing complete with galvanised steel earth plate electrode 60cm × 60cm × 6mm thick, buried directly in ground vertically to a depth not less than 2.25 metres deep below ground level with top edge of the earth plate at a depth not less than 1.5 metres below ground level earth plate surrounded from all sides by 15cm thick packed layer of charcoal dust and common saft filling in alternate layers and electrode connection by using earth strip 25x4mm dia by means of bolts, nuts, check nuts and washers made of galvanised iron and thimbles and other end of the earth wire connected to main switch board protected by galvanised iron light grade pipe 15mm bore in wall/ floor/ and GI pipe 20mm bore light grade for watering with funnel and wire mesh PCC chamber in cement concrete 1:3:6 type C-2 and RCC pit cover including necessary excavation and earth work in any type of soil, returning filling with approved soil and disposed of surplus soil to a distance not exc 50 mtr away complete all as shown in electrical plate No 3 of SSR 2020 (Part-I). |
| 27 | M&L for road cutting, including excavation returning filling in, spreading levelling, well ramming in layers not exc 25cm thick each soiling with, broken boulders stones, WBM 7.5 cm thick coarse aggregate received from dismentling the existing WBM of road, watering and ramming, 40 mm thick PCC 1:2:4, type B-1 (using 20mm graded crushed stone aggregate) for road patch repair work, section/ cross section area of cutting shall be same as of existing specification complete as specified and as directed by Engineer-in-Charge. |
| 28 | M&L for precast RCC route indicator made of RCC (1:2:4 type B-1 using 20mm graded crushed stone aggregate) of size 150 x 150 x 900mm with 8mm dia reinforcement @ 100 c/c both ways duly engraved \\" LT cable/ Joint/ Feeder No\\" including two coats of synethic enamel paint complete all as specified and directed. |
| 29 | S&F junction box poly corbonate with glass fibre reinforced, environment friendly, recylable, UV resistant, halogen and silicon free anti acid and anti corrosive IP 66/67 in accordance with IE rule internally embedded gasket, junction box including 3 phase 415 volt aluminium bus bar and din rail for fixing the MCB including one No MCB SP 6A 10KA to control the street light with necessary clamps, nuts bolts to fix the junction box with poles complete all as specified and directed. |
| 30 | S&F of two single core PVC insulated cable with stranded copper conductor of size 2.5 sqmm fixed in and incl non metallic PVC conduit including fixing accessories of conduit i.e clamps, nuts and bolts complete all as specified and directred. |
| 31 | Taking down light grade 80mm GI tubing complete all as specified and directed. |
| 32 | Taking down light grade 50mm GI tubing complete all as specified and directed. |
| 33 | Taking down light grade 40mm GI tubing complete all as specified and directed. |
| 34 | Taking out old unserviceable bricks complete all as specified and directed by Engineer-in-Charge. |
| 35 | A Schedule of Credit for old/unserviceable demolished/ dismantled items has been catered for in the tender. The Schedule of Credit is pre-priced by MES. The final amount of the tender shall be arrived at after deducting the total amount of Rs. 1,58,975/- Schedule of Credit from the total amount of BoQ as per General Summary sheet catered for after Schedule of Credit. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 17, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 07, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 17 daysNov 14, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 24 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender