Tender For Special Repair To Toilet Block In Bldg No. 37 And Provn Of Lightning Conductor At Various Location At 14 Gtc Subathu Under Ge Kasauli
Tender Value
30.96 Lakhs
Estimated cost
Bid Submission
07 Nov 2026
3 days left
EMD
61920
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Solan → Himachal Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Special Repair To Toilet Block In Bldg No. 37 And Provn Of Lightning Conductor At Various Location At 14 Gtc Subathu Under Ge Kasauli
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 31-Oct-2026 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 07-Nov-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | Schedule 'A' Section - I |
| 2 | Excavation in trenches in hard/dense soil not exceeding 1.50 metre wide and exc 1.5 mtr but not exceeding 3.00 metre deep for foundations etc. or for cesspits etc. and not exc. 10 Sq. m on plan and not exc. 1.5 metre in depth and getting out complete, all as specified. |
| 3 | Returning, filling in, of hard/dense soil, including spreading, levelling, watering and well ramming in layers not exceeding 25 cm thick each as in excavated area or inside build up area complete, all as specified. |
| 4 | Removing excavated materials not exceeding 50 m and depositing where directed at a level not exceeding 1.5 metre above the starting point in soils, complete all as specified. |
| 5 | Demolition and breaking up to 200mm dia drain/sewer pipes below ground level (salt glazed stoneware, AC or reinforced concrete and PVC) set in cement mortar incl PCC at any depth complete all as specified and as directed. |
| 6 | Material & labour for salt glazed stone ware drain pipe laid in trenches and jointed all as specified (internal dia of pipe 200mm bore pipe) complete all as specified |
| 7 | Material and labour for plain cement concrete type C2, 1:3:6 using 40mm graded crushed stone aggregate as in bed to drain pipes including packing under & haunching against the sides of pipes (200 mm bore pipe) after the pipe are laid and tested complete all as specified and directed. |
| 8 | Material and labour for cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or ¾ section) in plain cement concrete 1:2:4 type B1 smooth finished, and reforming benching as required, internal dia of pipe 200mm all as specified and directed. |
| 9 | Demolition of cement concrete in ground floors and pavings n exc 15cm thick (below or above GL) complete all as specified and directed. |
| 10 | Material & labour for cement concrete type D2 1:5:10 ( using 40mm graded aggregate) as in foundations, filling and mass concrete. |
| 11 | Material & Labour for 75 mm thick plain cement concrete C-1, 1:3:6 (using 20mm graded crushed stone aggregate) as in plinth protection, floors etc finished fair and even without using extra cement complete all as specified & directed. |
| 12 | Demolition of brick work built in cement mortar including all quoins arches pillars all as specified. |
| 13 | Material & labour for Brick work with sub class ‘B’ bricks, straight or curved on plan exceeding 6 metre mean radius in cement mortar (1:4), using old size bricks, complete all as specified. |
| 14 | Same as item no. 12.00 above, but except bricks all as specified. |
| 15 | Material & labour for broken brick/stone or boulders for Hardcore of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and directed |
| 16 | Material & labour for 40mm thick Damp proof course in cement concrete 1:2:4, type B-0 to horizontal or vertical surfaces including necessary formwork and APP membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyster non wove fabric (wt. not less than 150 gms/sqm), laid on a coat of bitumen primer, @ 0.30 to 0.50 kg per sq. m complete all as specified and directed. |
| 17 | Material & labour for providing cement concrete 1:2:4 type B-1 (using 20 mm graded crushed stone aggregate) in plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, fixing door frames etc including necessary form work complete all as specified and directed. |
| 18 | Demolition of reinforced cement concrete of any description in any position as in chajja/shelves, RCC Tank, kitchen chimney etc., including removal taken to any lead of rubbish outside MoD land, complete all as specified. |
| 19 | Material & labour for RCC 1:2:4 in slabs supported on walls, beams, deck slabs and in shelves (as at kitchen, WHB, Sink etc) and the like, incl necessary formwork, complete all as specified. |
| 20 | Material and labour for Precast reinforced cement concrete (1:2:4) type B-1 using 20mm graded crushed stone aggregate as in cover slabs of manholes, gully traps etc set in cement mortar (1:4) complete all as specified and directed. |
| 21 | Material & labour for Reinforced cement concrete (nominal mix) TypeB0 1:2:4 Type B1 1:2:4 (12.5mm graded (20 mm graded aggregate) Beams, cantilevers, bressummers, lintels, chajjas complete all as specified and directed. |
| 22 | Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required as in lintels, shelves etc including cranking, bending etc., and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips, complete all as specified. |
| 23 | Material & labour for Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers chajjas, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc. |
| 24 | Material & labour for Rendering 15mm thick on fair faces of new/old brick work or concrete surfaces incl cornices, chajjas, sun shades etc. in CM 1:4 finished even and smooth without using extra cement and with or without water proofing compound (2% 0f cement content) (External surface), complete all as specified and directed by Engr-In- Charge. Note: If WPC used, then it will paid separately. |
| 25 | Material & labour for Rendering 15mm thick on fair faces of old brick work or concrete surfaces at any height incl walls, cornices, chajjas, sun shades etc. in CM 1:4 finished even and smooth without using extra cement and with or without water proofing compound (2% 0f cement content) (External surface) incl necessary using scafolding or shuttering and taking down old plaster, complete all as specified and directed by Engr-In- Charge. Note: If WPC used, then it will paid separately. |
| 26 | Supply only Integral waterproofing compound all as specified as per manufacture instruction complete all as specified and directed by Engr-In- Charge. |
| 27 | Material & labour for applying 3 mm thick (achieved in two coats) wall care putty of new undecorated plastered surfaces of wall complete all as specified and directed |
| 28 | Material & labour for untreated surfaces by applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces. |
| 29 | Dismantling timber scantling un framed work in fillets, rails, posts, rafters, purlins, etc. under 40 sq. cm in section in any position, complete all as specified. |
| 30 | Dismantling wrought iron or mild steel work of any description not otherwise provided for. |
| 31 | Mild steel work in tubular trusses/frames wk for roof purlins, rafters & tank stagging, ladder etc, including special shaped washer etc., complete using ERW or induction butt welded type conforming to IS 1161-1979 grade st. 240, complete all as specified and directed. |
| 32 | Material and Labour for Hard drawn steel wire fabric weight not exceeding 4 kg/ Sqm cut to lengths, bent to shape required and tying with wood or steel members complete all as specified and as directed by the Engineer-in-Charge. |
| 33 | Material and labour for preparing new steel surfaces exc 10cm girth and applying two coats of synthetic enamel paint over a coat of red oxide primer all as specified. |
| 34 | Excavation in posts holes (or similar holes) each not exceeding 0.5 cubic metre, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, watering and removing surplus soil to a distance not exceeding 50 metre and good surface in soft/loose soil, complete all as specified. |
| 35 | Material & labour for providing cement concrete 1:3:6 type C-1 (using 20 mm graded crushed stone aggregate) as in filling/fixing chowkhats, plinth courses, copings, kneelers, apex stones, bed plates, post holes etc including necessary form work complete all as specified and directed |
| 36 | Dismantling plain or corrugated steel sheeting any guage thickness incl Nainital pattern as in roof covering complete all as specified. |
| 37 | Supply and fixing of Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, ridges etc. fixed all as per manufactures's instructions and fixed with self thread making steel screws of length not less than 50mm as directed by Engr-in-Charge at site with suitable arangement as required complete all as specified & directed. |
| 38 | Same as item No 36.00, above but plain steel sheet as in roof covering/ cladding to wall, ridges, flashing, eaves board valley gutter of any shape, cut to designed shape (Jhhallar) etc all as specified. |
| 39 | Taking down chowkats or frames with shutters (without taking off shutters from the frame) area exc 1.50 sqm & not exc 4.00 sqm each and removing from site, complete all as specified & directed by Engineer-in-Charge. |
| 40 | Taking down chowkats or frames with shutters (without taking off shutters from the frame) area not exc. 1.5sqm each and removing from site, complete all as specified & directed by Engineer-in-Charge. |
| 41 | Supply and fixing of Powder coated (Colour & Texture as directed) aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (Fixed portions) frames with extruded built up standard tubular sections/ appropriate Z sections and other sections (Size as directed) of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Charge. |
| 42 | Supply and fixing of powder coated Anodised aluminium door shutters, aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos, anodised sliding door bolts 250mm long with hasp and staple(bolt type) in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified. |
| 43 | Supply and fixing of powder coated Anodised aluminium window, ventilator & cabinate shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stay 150mm long (1 no.), stainless steel hinges 100mm (2 no.)/ stainless steel handles 125mm (1 no.)/ stainless steel Tower bolts 150mm (2 no.)/ pivots/ fasteners/ stays/ rollers, complete all as specified |
| 44 | Supply and fixing of Anodised colour powder coated aluminium grill, opening of grill 50 mm approx. & above and thickness 6.3 to 8 mm (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineer-in- charge. |
| 45 | Supply and fixing, as in repair, Door closer hydraulically regulated, Aluminium (extruded section) body, designation No. 2, universal type, suitable for door shutters of 701 to 851 mm in width and of weight between 61 to 80 kg and fixed, complete all as specified and directed. |
| 46 | Supply and fixing of double leaged floor door stopper of over all length of cover plate 140 mm of aluminium alloy body and tongue anodized with hard drawn steel spring fixed in floor all as specified |
| 47 | Supply and fixing for brass mortice lock, vertical type,4 levers, size 100 mm, as in repairs, all as specified and directed |
| 48 | Supply and fixing for 12 mm thick Pre laminated interior grade one side with decorative choice lamination & other side balancing white lamination, laminated board, complete all as specified. |
| 49 | Supply and fixing of Figured glass thickness 4 mm, pin head type and glazing with oil putty in squares n exc 0.5 sq. m in each pane |
| 50 | Supply and fixing of stainless steel steel wire cloth for gauge door shutter & windows shutter 0.36mm nominal dia of wire and 1.40mm aparture fixed with tinned tackes or galvanised wire staples or iron flates . |
| 51 | Supply and fixing Solid PVC Door Frame of size 50mm x 47mm made out of 5mm wood grain printed PVC sheet used instead of Plain colour PVC sheet & edges will be painted to match with printed sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing. |
| 52 | Supply and fixing Factory Made Solid PVC Moulded Door Shutter With Particle Board Core, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded Prelam PVC Sheet on the front face & 2mm Plain colour PVC Sheet on back face, supplying & fixing in frame at site as per specification & drawing |
| 53 | Material & Labour barrel tower bolts aluminium anodised extruded section of size 150 mm complete all as specified & directed. |
| 54 | Supply and fixing of aluminium fabricated type extruded handles of size 150 mm complete all as specified & directed. |
| 55 | Supply and fixing of Aluminium anodised, skeleton tower bolts with plate, staples (Locking Bolt) and length of bolt 375mm and bolt of extruded section and fixed. |
| 56 | Supply and fixing of stainless steel hinges, medium weight cold rolled mold steel, size 100 mm, ISI marked, complete all as specified and directed . |
| 57 | Supply and fixing of, fancy type, bib cock long neck with flange cast copper alloy chromium plated, fancy type, screwed for iron pipe or for union, suitable for 15mm bore pipe, complete all as specified and directed. |
| 58 | Supply and fixing, in repair, fancy type, bib cock long neck with flange cast copper alloy chromium plated, fancy type, screwed for iron pipe or for union, suitable for 15mm bore pipe, complete all as specified and directed. |
| 59 | Supply and fixing of fancy type, Angle valves, cast copper alloy,screwed down,high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed |
| 60 | Supply and fixing, in repair, fancy type, Angle valves, cast copper alloy,screwed down,high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed |
| 61 | Supply and fixing of rectangular sheet glass shelf assembly, fancy type, consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete. |
| 62 | Supply and fixing of Fancy type elegant corner glass shelf of radius 300 mm with 300x600 mm size including 02 Nos. metallic holding brackets, railing etc. fixed with PVC rawl plugs and wooden screws, complete all as specified and directed. |
| 63 | Supply and fixing of, PVC bathroom mirror cabinet size 400x500mm, selected quality, single door, wall mounted plastic multi utility type, complete. |
| 64 | Supply and fixing of soap dish size 160x160x90mm, vitreous china white, fixed to plugs with chromium plated brass screws complete. |
| 65 | Supply and fixing of, table mounted tall boy, stainless steel, chrome finish, automatic touchless basin mixer (hot & cold) with sensor with sensor eye for basin with complete kit (incl battery/DC operated system) complete. Make: Jaquar, Code: SNR-CHR-15017PMPK or equivalent make as mentioned in Appx 'B' of CA. |
| 66 | Supply and fixing, in repair, table mounted tall boy, stainless steel, chrome finish, automatic touchless basin mixer (hot & cold) with sensor with sensor eye for basin with complete kit (incl battery/DC operated system) complete. Make: Jaquar, Code: SNR-CHR-15017PMPK or equivalent make as mentioned in Appx 'B' of CA. |
| 67 | Supply and fixing of brass chromium plated tubular towel rail 20mm dia 'D' type 60 cm long between flanges complete all as specified |
| 68 | Supply and fixing in repair, brass chromium plated tubular towel rail 20mm dia 'D' type 60 cm long between flanges complete all as specified |
| 69 | Supply and fixing of brass chromium plated dual foldable tubular towel rack, 20mm dia 'D' type 60 cm long between flanges complete all as specified |
| 70 | Supply and fixing of 15mm dia PVC connection with PTMT nut, of length 600mm, complete all as specified and directed. |
| 71 | Supply and fixing, in repair, 15mm dia PVC connection with PTMT nut, of length 450mm, complete all as specified and directed. |
| 72 | Supply and fixing of, 10 mm thick, Toughned glass used as toughned looking mirror as in wall mounted, hinged doors, partitions automatic doors and similar work including cutting to required shape (rectangular or curve edge rectangular or square or circular), fitting & fixing by standoffs/spacers holding it off the wall through pre-drilling holes in mirror or by clips/brackets and cup washers complete all as specified. |
| 73 | Supply and fixing of, Grating square 125 mm size (openable) with or without hole of PTMT (Minimum weight 100gms) complete all as specified and directed. |
| 74 | Supply and fixing, in repair, Grating square 125 mm size (openable) with or without hole of PTMT (Minimum weight 100gms) complete all as specified and directed. |
| 75 | Supply and fixing of, mild steel chromium plated Health faucet (ABS Body) suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified. |
| 76 | Supply and fixing of brass, chromium plated or stainless steel toilet paper holder colour, complete all as specified and as directed |
| 77 | Supply and fixing of, in repair, brass, chromium plated or stainless steel toilet paper holder colour, in repair, complete all as specified and as directed |
| 78 | Supply and fixing in repair, mild steel chromium plated Health faucet (ABS Body) suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified. |
| 79 | Supply and fixing of, vitreous china, Table-Top wash hand basin for bathroom, ceramic glossy Rectangle Countertop vessel sink, white, fency decorative type, approx size 600mm x 400x 120mm fixed over granite incliding CP waste coupling, waste pipe but exclusive of pillar tap/mixer, PVC connection, complete all as specified and as directed by Engr-in-Charge. |
| 80 | Supply and fixing, in repair, vitreous china, Table-Top wash hand basin for bathroom, ceramic glossy Rectangle Countertop vessel sink , white, fency decorative type, approx size 600mm x 400x 120mm fixed over granite incliding CP waste coupling, waste pipe but exclusive of pillar tap/mixer, PVC connection, complete all as specified and as directed by Engr-in-Charge. |
| 81 | Supply and fixing of vitreous china wash down water closet (pedestal pattern) inbuilt connectivity to syphonic action type flushing cistern (One-Piece EWC, floor mounted) with PVC in let ball valve, float and push button, 10 ltrs capacity, of colour snow white, of approx size 720(H)x405(h)x635(L)x350(B)mm and including slim soft close seat cover of same colour & pressure jet spray and all necessary fittings etc. complete all as specified and as directed by Engr-in-Charge. |
| 82 | Supply and fixing, in repair, vitreous china wash down water closet (pedestal pattern) inbuilt connectivity to syphonic action type flushing cistern (One-Piece EWC, floor mounted) with PVC in let ball valve, float and push button, 10 ltrs capacity, of colour snow white, of approx size 720(H)x405(h)x635(L)x350(B)mm and including slim soft close seat cover of same colour & pressure jet spray and all necessary fittings etc. complete all as specified and as directed by Engr-in-Charge. |
| 83 | Supply and fixing, wall hung, rectangular/trapezodial shaped curved edges urinal partition plate of frosted glass 8mm thick, approx min. size 900x450mm incl stainless steel hinges, brackets & installation accessaries for easy set up and normally about 40cm above floor line complete. |
| 84 | Supply and fixing of Vitreous China urinals, Half stall type (back or corner wall type) of size 420x395x635mm of white with incl CP brass coupling, PVC flexible discharge pipe including chromium plated water spreader, connection pipe and discharge down pipe, complete all as directed |
| 85 | Supply and fixing in repair Vitreous China urinals, Half stall type (back or corner wall type) of size 420x395x635mm of white with incl CP brass coupling, PVC flexible discharge pipe including chromium plated water spreader, connection pipe and discharge down pipe, complete all as directed |
| 86 | Supply and fixing of, stainless steel, chorme finish, bottle trap for urinals or WHB, complete all as specified and directed. |
| 87 | Supply and fixing, in repair, stainless steel, chorme finish, bottle trap for urinals or WHB, complete all as specified and directed. |
| 88 | Supply and fixing of, wall mounted stainless steel, chrome finish, automatic touchless urinal flusher with sensor consisting of wall flange with sensor eye for urinals with complete kit (incl exposed part kit and concealed installation box & battery of 4x 1.5V AA) complete all as specified and directed. Make: Jaquar, Code: SNR-CHR-51085K or equivalent make as mentioned in Appx 'B' of CA. |
| 89 | Supply and fixing, in repair, wall mounted stainless steel, chrome finish, automatic touchless urinal flusher with sensor consisting of wall flange with sensor eye for urinals with complete kit (incl exposed part kit and concealed installation box & battery of 4x 1.5V AA) complete. Make: Jaquar, Code: SNR-CHR-51085K or equivalent make as mentioned in Appx 'B' of CA. |
| 90 | Taking down & fixing, old servicealble wall mounted automatic touchless urinal flusher with sensor for urinals with complete kit (incl exposed part kit and concealed installation box & battery complete |
| 91 | Dismantling PVC water storage tank of capacity exceeding 500 litre but not exceeding 1000 litre, complete all as specified and directed. |
| 92 | Supply and fixing of Rotational moulded PVC, Triple layered, water storage tanks of capacity 1000 litre (cylindrical vertical with closed top), ISI Marked, hoisted and fixed in position, with inlet & outlet connections with 15/20mm ball valve & including all fittings such as GI tank nipple 150 mm long with washer & plug etc, complete all as specified and directed. |
| 93 | Supply and fixing in repair Gun metal, globe or gates valves, with iron wheel head, screwed down, high pressure, heavy duty, ISI marked, screwed both ends for iron pipe or for union of 20 mm bor dia, including taking down old & removal, complete all as specied and directed. |
| 94 | Supply and fixing, in repair, ball brass valve 20mm dia, high pressure, with polythene float and fly nut complete, screwed for iron pipe or brass ferrule complete all as specified and as directed. |
| 95 | Taking up or down 15 mm dia steel tubing and connection and removal at site directed by Engr-In Charge. |
| 96 | Supply and fixing 15mm bore tubes \\"medium grade\\" galvanized with and incl all fittings complete to walls and ceiling or laid in floors but refixing old water metres, complete all as specified & directed. |
| 97 | Taking up or down 20 mm dia steel tubing and connection and removal at site directed by Engr-In Charge. |
| 98 | Supply and fixing 20mm bore tubes \\"medium grade\\" galvanized with and incl all fittings complete to walls and ceiling or laid in floors but refixing old water metres, complete all as specified & directed. |
| 99 | Cutting chases, pinning in brick wall , making good to facing where required and pointing in CM 1:3 to ends or edges of slabs and making good cutting exc. 10 cm but n.exc 20 cm girth. Etc complete all as specified and directed |
| 100 | Taking down/dismantling old eaves gutters and rainwater pipes, SWR pipes, waste drain pipe, sewage pipes, CI pipes of any dia (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, tee etc., including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fittings and accessories). |
| 101 | Supply and fixing of 110mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall, laid in floor etc including camps as required complete all as specified and directed (Make ; Finolex,Diplast,Suprime) or equivalent make as mentioned in Appx 'B' of CA. |
| 102 | Material and labour for plain cement concrete type C2, 1:3:6 using 40mm graded crushed stone aggregate as in bed to drain pipes including packing under & haunching against the sides of pipes (upto 100mm bore pipe) after the pipe are laid and tested complete all as specified and directed. |
| 103 | Supply and fixing of 110mm dia PVC (SWR) junction double, (single T), equal or un equal with oval accesse door including jointing with solvant cement as required complete all as specified. |
| 104 | Supply and fixing of 110mm dia PVC (SWR) junction double, (single T), equal or un equal including jointing with solvant cement as required complete all as specified. |
| 105 | Supply and fixing of 110mm dia PVC (SWR) coupler/bend/reducer, fixed as required complete all as specified. |
| 106 | Supply and fixing of 110mm dia PVC (SWR) vent cowl jointing with solvant cement as required complete all as specified. |
| 107 | Supply and fixing of 75mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints, laid in trenches or in floors, fixed to wall including camps as required complete all as specified and directed (Make ; Finolex,Diplast,Suprime) or equivalent make as mentioned in Appx 'B' of CA. |
| 108 | Supply and fixing of 75mm dia PVC (SWR) bends with oval accesse door with rubber ring joints fixed as required complete all as specified. |
| 109 | Supply and fixing of 75mm dia PVC (SWR) floor trap, plain with grating including jointing with solvant cement incl necessary PCC & form work as required complete all as specified. |
| 110 | Supply and fixing of 75mm dia PVC (SWR) bends/elbows with rubber ring joints fixed as required complete all as specified. |
| 111 | Supply and fixing of 75mm dia PVC (SWR) coupler, fixed as required complete all as specified. |
| 112 | Supply and fixing in repair, Stack clamps out of 50 mm by 5 mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof complete all as specified and directed. |
| 113 | Material and labour for 25mm thick plain cement concrete 1:2:4 type B-0 (using 12.5mm graded stone aggregate) as in levelling courses laid and compacted in slope in floor complete all as specified and as directed. |
| 114 | Dismantling floor, hearth or wall tiling, terrazzo toping/ dado, including cement mortar bedding/backing and removing rubbish off the premises of MoD land, including preparation of dismantled surface area to receive backing coat/bedding layer for tiles, complete all as specified and directed. |
| 115 | Material & labour for first quality joint free Non Skid glazed ceramic tiles (coloured) 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to matchas in floors set and jointed in cement slurry and pointed in coloured cement including provision of screed bed 15mm thick in CM (1:4) complete all as specified and directed by Engr-in- Charge. |
| 116 | Material & labour for Vitrified Ceramic tiles 8-10 mm thick (square/ rectangular) polished ceramic tiles (coloured/dark shade /double charged/ultrachaged) area of each tile exc. 0.42 sqm but n. exc. 1 sqm as in floors set and jointed in cement slurry and pointed in coloured cement including provision of screed bed 15mm thick in CM (1:6) and incl dismantling old floor tiles with bed, complete all as specified & as directed. |
| 117 | Material & labour for 1st quality, joint free glazed ceramic coloured tiles 7 to 8 mm thick area of each tile not exceeding 1.00 sqm on vertical surface of walls set and jointed with neat cement slurry @ 3.00 Kg / Sqm and pointed in white cement with pigment to match the shade of tiles, over 10mm thick rendering in CM 1:4, complete all as specified and directed by Engr-In- Charge. |
| 118 | Demolition of stone slabs and tiles of any description or thickness in floors aprons etc, laid beded and pointed in any mortar complete all as specified and directed. |
| 119 | Material & labour for machine cut Granite slab 20 mm thick as in steps, countershelf, pillars, window cills, cooking plateforms and like and incl 10mm thick (avg thickness) cement mortar 1:4 screeding and setting coat in cement morter 1:2, 3mm thick, set and jointed with white cement sturry mixed with pigment to match the shade of slab incl cutting, waste, rubbing and polshing etc complete all as specified and directed. |
| 120 | Material and labour, coloured chequered cement concrete tiles 200X200X25mm or 300x300x25mm thick, factory made, ISI marked (IS 13801-1993), with grey cement & pigment, laid with neat cement slurry as in path, pavement ,floors, etc. @ 3Kg/Sqm over & including 20mm thick screed bed of cement mortar (1:6), pointed in white cement with matching colour pigment, complete all as specified and directed. |
| 121 | Material & Labour, providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand, complete all as specified and directed. |
| 122 | Dismantling of wall and ceiling boards (fiber, pulp, insulation, etc) or insulation board/slab/blankets, any thickness, including cover fillets and removal from site complate all as specified and directed. |
| 123 | Material & labour for Providing and fixing Gypsum Board (size: 595x595mm) 12mm thick in ceiling fixed with screw as per manufacturers instructions by M/S Lafarge/Boral board Gypsum India Pvt Ltd at all height and levels standard board to be laid on 'LaGap universal channel and with anodised aluminium snap grid frame work having black groove line within frame section of suitable required size and incl Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs or rafter/purlins of iron/wood by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified and directed by Engr-in-Charge. |
| 124 | Taking down copper/ aluminium point wiring(light, fan, socket or power) complete, including fittings and fixtures such as switches, ceiling roses, pendants, regulators, sockets, light fittings etc removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions seperately) and making good distrubed surfaces of wall, floors, etc complete all as specified and directed. |
| 125 | Material & Labour for point wiring with PVC insulated and unsheathed FRLSH cable single core multistranded copper conductor 1.5 sqmm size, 1100 volts grade cable conforming to IS-694 1990 drawn in and including cutting chiseling and grouting concealed (any type wall) PVC conduit pipe, tee, elbow and bend etc and with all connecting accessories including fabricated MS terminal boxes fixed flush with wall surface with 3mm thick laminated sheet top cover or cover plate and metal box fixed with brass screw for mounting switches, sockets, regulator etc including 1.5 sqmm single core PVC insulated and unsheathed copper conductor earth continuity conductor to common earth and connecting to earth dolly all as specified for. |
| 126 | One light/fan/Ext Fan point controlled by one 05 Amps switch one way |
| 127 | One switch socket outlet 3 pin,5 Amp on the independent board |
| 128 | All as per item No. 124.00 above but with 2.5 sqmm (Nominal cross sectional area) cable with 2.5 Sqmm size copper earth continuity conductor for 3 pin 15/16 A socket outlet on independent board complete all as specified and directed. |
| 129 | Supply and fix modular switch, 5 Amp, one way complete all as specified and directed. |
| 130 | Supply and fix modular switch, 16 Amp, one way complete all as specified and directed. |
| 131 | Supply and fix modular socket 5 Amp 2/3 pin combined 2 module complete all as specified and directed. |
| 132 | Supply and fix modular socket 6/16 Amp 2/3 pin combined 2 module complete all as specified and directed. |
| 133 | Supply and fix ceiling rose, 3 phase/ PVC/ polycorbonate complete all as specified and directed. |
| 134 | Supply and fixing of 12W LED decorative mirror light fitting, chrome finish, IP44 rated, suitabke for bathroom use, to be installed above wash basin mirror in, complete with wall mounting arrangement, necessary PVC insulated copper wiring, connection to existing lighting circuit, testing and commissioning, complete all as specified and directed by Engr-in-Charge. |
| 135 | Supply and fixing 10W Environmental friendly, ultra modern, energy saving, surface mounted, decorative hexagon bulk head back-lit LED luminaire comprising of high bringtness LEDs complete all as specified and directed by Engr-in-Charge. |
| 136 | Supply and fixing Decorative wall light, gold finish fixture with cognac hammered glass diffuser suitble for 9 W LED filament lamp E27 base complete all as specified and directed. |
| 137 | Supply and fixing of exhaust fan 250mm sweep, approximately 1200 RPM, suitable for AC 230 volts, single phase, with plastic body and blades, complete with louvers/ shutters and bird guard. The Fan shall be fixed in wall opening using suitable frame, screws, nuts and bolts, including making good the wall after installation and ensuring proper alignment and operation complete all as specified and directed by Engr-in-charge. |
| 138 | Material & labour for earthing complete with galvanised mild steel earth plate electrode 60 cmx 60cm x 6 mm thick buried directly in ground (earth pit not less than 2.25 meter deep below ground level) with top edge of the plate not less than 1.5 mtrs below normal ground level steel earth plate connected with GI Strip of size 32 x 6 mm dia as earth lead by means of lug, bolts, nuts, check nuts, washers of galvanised iron or steel GI protection pipe 40mm bore light grade all as shown in elect plate No. 3 of SSR - 2009 (Pt - I) connecting to earthing test point including excavation, earth work, salt and charcoal dust mixed and packed 150mm thick around GI earth plate, GI pipe medium grade 20mm nominal bore watering pipe GI sheet funnel wire mesh, concrete pit, RCC cover in PCC 1:2:4 type B1 duly reinforced with MS Bars 6mm dia at the rate of 150mm center to centre both way with suitable lifting handle and pit/ chamber in PCC 1:3:6 type C1, for pit cover including testing on completion complete all as specified and directed. :- After completion of work if desired test result is not obtained the earthing is to be redone without any extra cost to deptt. |
| 139 | Supply and fixing of steel water tubing, medium grade, galvanised (ISI marked), 25mm bore with all fittings, laid in trenches/ under roads or fixed to poles for passing cables for protection of cables, complete, all as specifed and directed. |
| 140 | Material & labour for in repair PCC (1:2:4) type B-1 using 20mm graded aggregate as in coping of new pole, including necessary form work complete all as specified and directed. |
| 141 | Supply and fixing of GI strip 32 X 6 mm complete laid in trenches or fixed to wall etc with saddels, spacers etc for fixing as required and connected to poles/ equipment etc complete all as specified and directed. |
| 142 | Supply and fixing aluminium strip 25 X 3 mm complete laid in trenches or fixed to poles etc with saddles, spacers etc for fixing as required and connected to poles/ equipment etc complete all as specified and directed. |
| 143 | Supply and fixing single point air termination Aluminium rod 12mm dia 300mm long complete all as specified and directed. |
| 144 | Supply and fixing test point terminal block made of gun metal or of phosphor bronze size 75 X 75 X 25mm drilled and screwed including 3 Nos 8mm dia 25mm long head screws complete all as specified and directed. |
| 145 | Amount of credit of Rs. 54411.20 for retrived old material as mentioned in Schedule 'A' section-II of tender document in pdf form, will be deducted offline while acceptence of tender. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 31, 2026
11:30 IST
Tender Published
Tender notice published.
Completed
Nov 07, 2026
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Upcoming · 3 daysNov 07, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 3 daysNov 13, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 9 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender