Tender For Repair/Maint Of Water Supply Distribution Pipes And Joints, Control Valves At Kalina, 121 Hf, Duty Crew Hanger, 3 Mflu At Af Stn Mumbai Under Ge (Af) Thane
Tender Value
40.50 Lakhs
Estimated cost
Bid Submission
05 Nov 2026
10 days left
EMD
81000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Thane → Maharashtra
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair/Maint Of Water Supply Distribution Pipes And Joints, Control Valves At Kalina, 121 Hf, Duty Crew Hanger, 3 Mflu At Af Stn Mumbai Under Ge (Af) Thane
BOQ
| Sl. No. | Item Description |
| 1 | Excavation in trenches not exceeding 1.5 m wide and not exceeding 1.5m in depth for taking out/laying pipe line and getting out, in soft/loose Soil complete all as specified and directed by Engineer-in-charge. |
| 2 | Returning, filling including spreading leveling, watering and well ramming in layers not exceeding 25 cm in any type of soil complete all as specified and directed by Engineer-in-charge. |
| 3 | Removing excavated material to a distance not exceeding 50 m and depositing where directed at a level not exceeding 1.5 m above the starting point complete all as specified and directed by Engineer-in-charge. |
| 4 | Disconnecting ,dismantling and taking down of unserviceable rusted water tubing GI of size 100/80 mm from existing place in trenches/wall/floors/ceilings complete all as specified and directed by Engineer-in-Charge. |
| 5 | All as per item No 4 here-in-before but GI of size 50 mm complete aii as specified and directed by Engineer-in-Charge. |
| 6 | All as per item No 4 here-in-before but GI of size 40 mm complete aii as specified and directed by Engineer-in-Charge. |
| 7 | All as per item No 4 here-in-before but GI of size 25 mm complete aii as specified and directed by Engineer-in-Charge. |
| 8 | Supplying & Laying, connecting and testing GI pipe 100 mm bore medium grade including necessary fittings in trenches complete all as specified and directed by Engineer-in-charge. |
| 9 | All as per item No 8 here-in-before but of size 80 mm bore complete all as specified and directed by Engineer-in-charge. |
| 10 | All as per item No 8 here-in-before but of size 50 mm bore complete all as specified and directed by Engineer-in-charge. |
| 11 | All as per item No 8 here-in-before but of size 40 mm bore complete all as specified and directed by Engineer-in-charge. |
| 12 | All as per item No 8 here-in-before but of size 25 mm bore complete all as specified and directed by Engineer-in-charge. |
| 13 | Dismantling and taking out unserviceable Sluice Valve of size 80 mm bore from line complete all as directed by Engineer-in-charge. |
| 14 | Dismantling and taking out unserviceable Sluice Valve of size 100 mm bore from line complete all as directed by Engineer-in-charge. |
| 15 | Supply and fix Sluice Valve Class PN 1.6 80 mm dia with iron wheel head, gaskets nuts, bolts,washers complete all as directed by Engineer-in-Charge. |
| 16 | Supply and fix Sluice Valve Class PN 1.6 100 mm dia with iron wheel head, gaskets nuts, bolts,washers complete all as directed by Engineer-in-Charge. |
| 17 | Dismantling and taking out unserviceable gun metal gate valve of size 50 mm to 40 mm bore from line complete all as specified and as directed by Engr - in- charge. |
| 18 | Dismantling and taking out unserviceable gun metal gate valve/stop valve of size 25 mm to 20 mm complete all as specified and as directed. |
| 19 | Supply and fix gun metal globe or gate valves with iron wheel head, screwed both ends for iron pipe of sizes 50 mm dia complete all as specified and as directed by Engineer - in-Charge: |
| 20 | Supply and fix gun metal globe or gate valves with iron wheel head, screwed both ends for iron pipe of sizes 40 mm dia complete all as specified and as directed by Engineer - in-Charge: |
| 21 | Supply and fix gun metal globe or gate valves with iron wheel head, screwed both ends for iron pipe of sizes 25 mm dia complete all as specified and as directed by Engineer - in-Charge: |
| 22 | Supply and fix gun metal globe or gate valves with iron wheel head, screwed both ends for iron pipe of sizes 20 mm dia complete all as specified and as directed by Engineer - in-Charge: |
| 23 | Dismantling damage and broken valve chamber of size 1200x1200x900mm including unserviceable rusted MS cover complete without disturbing the existing pipe lines valves and provide valve chamber including necessary earth work in any type of soil PCC 1:1.5:3 in base concrete brick work in CM (1:6) with 10mm thick plaster internally and 15mm thick externally in CM (1:4) 6mm thick MS sheet cover with hinges and locking arrangements fixed to angle iron frame made out of 502x50x6mm MS complete with 2 coat of synthatic enameled paint over a coat of red oxied on all steel work and 2 coats of white washing on plastered surface of valve chamber of any sizes complete all as specified and as directed by Engr - in- charge. |
| 24 | All as per item no 23 here-in-before but of size 900 mm X 900 mm X 900 mm internal complete all as specified and directed by Engineer-in-charge. |
| 25 | Material and Labour for PCC (1:2:4) type B-1 for supporting pillar posts for pipes/flooring/pavings / foundation for motor etc complete all as specified and directed by Engineer-in-charge. |
| 26 | Material and Labour for brick work with subclass B bricks in cement mortar 1 : 4 , straight or curved on plan exc 6m mean radius built in including taking down unserviceable bricks complete all as specified and directed by Engineer-in-charge. |
| 27 | Material and Labour for cutting bituminous surfaces road to a depth of n exc 60cm and not exceeding 60cm in width for taking out or laying of GI tubing and refilling the same with necessary making good works complete all as specified and as directed by Engineer-in-charge. |
| 28 | Demolition and dismantling of Cement concret of any description and in any position and removing the materials to a distance not exceeding 100 m all as ditrected by Engr in Charge. |
| 29 | Material. fabricated, and errection for base frame / Iron Ladder/Duct covers of UG Tank / OH Tank for centrufugal pumpset fabricated out of structural steel sections such as joint, hannel, angle, or tee sections including grouting nuts bolts, washers , checknuts etc and painting the frame with two coats of rust proof paint over a coat of zinc primer including dismantling and taking down rusted steel items from existing places complete all as directed by Engr-in-Charge. |
| 30 | Disconnecting, dismantling and taking out after disconnecting of incoming and outgoing water & electric connections & transportation to work shop of 3 to 5 HP pumping set for repairs/ rewinding.Dismantling the pumpset complete, separating the parts such as rotor, impellar,bearing, shaft seal, shaft cleaning of all dismantled parts, dismantling the motor and cutting & removing burnt winding from slot cleaning the slots , packing the slots with insulated packing material, rewinding with super enameled copper winding wire of same guage varnishing the stator & drying in oven reassembling the pumpset complete with and including new packing material, gland packing , stud, new set of bearings, terminal plate, transporting back to plant room, refixing on foundation connecting up and testing complete all as directed by Engineer-in-charge |
| 31 | All as per item No 30 herein but for motor of capacity 7.5 HP complete all as directed by Engineer-in-charge. |
| 32 | Supply and fixing in repairs fully automatic DOL starter suitable for 3 to 5 HP Pumping set 415 volts 3 phase as existing in panel board including taking down existing starter complete all as specified and directed .Make “Siemens / L&T / Bhartiya Cutler Hammer ” |
| 33 | Supply and fixing in repairs fully automatic DOL starter suitable for 7.5 HP Pumping set 415 volts 3 phase as existing in panel board including taking down existing starter complete all as specified and directed .Make “Siemens / L&T / Bhartiya Cutler Hammer ” |
| 34 | Supply and fixing in repairs Contactor ML-3 3 Pole with DC Coil suitable for 3 to 5 HP 415 volts 3 phase motor including taking down existing contactos complete all as directed by Engineer-in-charge |
| 35 | Supply and fixing in repairs Contactor ML-3 3 Pole with DC Coil suitable for 7.5 HP 415 volts 3 phase motor including taking down existing contactos complete all as directed by Engineer-in-charge |
| 36 | S & F in repairs Single Phase Preventer for motor protection Circuit Breaker up to 7.5 HP Motor including taking down existing complete all as directed by Engineer-in-charge. |
| 37 | Supply and Fix foot valve of Brass of Size 80 MM Dia complete all as specified and Directed by Engr-in-Charge. |
| 38 | S&F in repair CI sluice valve for 150mm dia including providing suitable size of nuts and bolts, washer , including removing of old unsv complete all as specified and as directed by Engr-in-charge. |
| 39 | Supply and fix MS pipe of size 150mm NB Class -C for interconnections of lines all as directed by Engineer in Chagre Note :- Rate are inclusive of fabrication charges. Welding work or any other support required for laying of pipe lines complete all as specified and directed by Engr-in-Charge. |
| 40 | Supply and fix MS pipe fittings including nut bolts and rubber packing’s all as per site requirement and directed by Engineer In Charge. |
| 41 | Supply and fix Rotational in replacement Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position complete all as specified and directed by Engr-in-Charge. specified of Size 10000 Ltrs capacity . |
| 42 | Dismantling and taking out unserviceable Sluice Valve of size 63 mm bore from line complete all as directed complete all as specified and directed by Engr-in-Charge. |
| 43 | Supply and fix Sluice Valve Class PN 1.6 63 mm dia with iron wheel head, gaskets nuts, bolts,washers complete all as directed complete all as specified and directed by Engr-in-Charge. Please Enable Macros to View BoQ information |
| 44 | Supply and fix Sluice Valve Class PN 1.6 63 mm dia with iron wheel head, gaskets nuts, bolts,washers complete all as directed complete all as specified and directed by Engr-in-Charge. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 17, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 05, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 10 daysNov 12, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 17 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender