Tender For Special Repair To Replacement Of Wooden Window To Aluminium Window At Jcos/Or Accn Of 21 Mtn Dou Under Ge Guwahati
Tender Value
Ref. Documents
Estimated cost
Bid Submission
07 Nov 2026
16 days left
EMD
75600
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Kamrup Metro → Assam
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Special Repair To Replacement Of Wooden Window To Aluminium Window At Jcos/Or Accn Of 21 Mtn Dou Under Ge Guwahati
BOQ
| Sl. No. | Item Description |
| 1 | Taking down chowkats or frames (without taking off shutter from the frame) not exc. 1.5 sq.m each and removing complete all as specified & as directed. |
| 2 | Taking down chowkats or frames (without taking off shutter from the frame) exc. 1.5 sq.m but not exc. 4 sqm each and removing complete all as specified & as directed. |
| 3 | M&L for providing Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and as the directed.Note:- (i) Design/pattern, profile sizes and other dimensions shall be of standard sizes and as directed |
| 4 | Supply and fixing powder coating of any colour (thickness of powder coating not less than 50 micron) Anodised aluminium window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specified.Note:- (i) Labour charges for fixing of glass is inclusive in the unit rate quoted. Glass shall be measured and paid seperately at supply only rates. (ii) Design/pattern, profile sizes and other dimensions shall be of standard sizes and as directed |
| 5 | Supply only 4mm thick Sheet glass frosted one side , ordinary quality fixed with aluminium frame work n exc 0.5 sq. m in each pane complete all as specified and as directed. |
| 6 | S&F stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and directed. |
| 7 | S&F in repair stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and directed. |
| 8 | M&L for 4 mm thick sheet glass ordinary quality and glazing with oil putty/wooden beads in squares not exc. 0.5 Sqm in each pane complete all specified and as directed. |
| 9 | S&F mild steel hold fasts; for securing chowkhats and similar small articles conforming to Fe-290 Gde-E-165 incuding treating hold fast with tar or coal tar black paint, sanding complete all as specified and as directed. |
| 10 | M&L providing plain cement concrete type C-1, (1:3:6), (using 20 mm graded stone aggregate), as in copings, fixing of hold fast, kneelers, apex stones, bed plates, water troughs and the like including weathering, slightly rounded or chamfered angles & throating as directed including necessary form work as required complete all as specified and directed. |
| 11 | Demolition of brick work/ block masonry or stone/ boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars etc but excluding ashlar facing dressed stone work and precast concrete articles and removal all rubbish material complete all as specified directed. |
| 12 | M&L for Brick work with sub class 'B' bricks straight or curved on plan exc 6.00 m mean radius built in CM 1:6 complete as specified and directed. |
| 13 | Taking down cement or cement lime plaster any description on any walls etc including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and as directed. |
| 14 | M&L for 15mm thick rendering with cement mortar (1:4) on fair faces of brick work in two layers (10mm & 5mm) seperately mixed with water proofing compound in top layer as per manufacturer's instructions and finishing the surface even and fair without using extra cement complete all as specified and as directed.Note:- WPC shall be measured and paid seperately under appropiate item. |
| 15 | Supply only liquid water proofing compound complete all as specified and as directed. |
| 16 | M&L for rendering 10 mm thick on faces of brick work or concrete surface in CM (1:6), finished even and smooth without using extra cement complete all as specified and directed. |
| 17 | M&L for preparing newly plastered surfaces and applying two or more coats of Acrylic Smooth exterior paint of required shade : New work @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm complete all as specified and directed. |
| 18 | M&L for preparation of newly plastered surfaces of wall and applying two coats of water based acrylic distemper over a coat of primer over a coat of 1mm thick wall care putty complete all as directed. |
| 19 | Dismantling floor hearth or wall tiling including cement mortar bedding but not backing and removing debrires from the site complete all as specified and as directed. |
| 20 | M&L for coloured glazed ceramic tiles 300 x 450 x 7 mm/ 450 x 350 x 7mm thick in vertical surfaces and jointed in neat cement slurry and pointed in white or coloured cement to match including 10mm thick backing with CM (1:4) complete all as specified and as directed. |
| 21 | Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed. |
| 22 | S&F Mild steel framed work with 10/12mm square bar and MS Flat 25x6 mm such as grills,gratings,etc.with ends of bars shouldered and/or riveted,or forged into spikes,framed guard bars, barred iron doors,ladders, framed balusters, walk ways,railings, framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and as directed. |
| 23 | M&L for providing Anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineerin-charge Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 17, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 07, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 16 daysNov 09, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 18 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender