Tender For Annual Rate Contract For Civil Maintenance Works At Nrpl Agra.
Tender Value
63.16 Lakhs
Estimated cost
Bid Submission
31 Oct 2026
5 days left
EMD
16000
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
agra → Uttar Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Annual Rate Contract For Civil Maintenance Works At Nrpl Agra.
BOQ
| Sl. No. | Item Description |
| 1 | Civil Composite work |
| 2 | Earth work by mechinical / manual means in rough excavaton in all kinds of soil, banking excavated earth, breaking clods, watering,compacting at optimum moisture content to 90% of Proctor's density, consolidation and rolling with 8 to 10 tonne power roller in layers not exceeding 20 cm thickness and dressing up in embankments for roads, food banks, marginal banks and guide banks or flling up ground depressions, up to all leads and lift. |
| 3 | Pipes, cables etc. not exceeding 80 mm dia. |
| 4 | 1:3:6 [1 cement : 3 coarse sand (Zone-III) derived from natural sources : 6 graded stone aggregate 20 mm nominal size derived from natural sources] |
| 5 | 1:2:4 [1 cement : 2 coarse sand (Zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources] |
| 6 | a) All work up to plinth level |
| 7 | b) In superstructure at all floors up to floor five level, |
| 8 | Steel reinforcement for R.C.C. workincluding initial straightening of coiled/uncoiled bars, removal of loose rust, cutting, bending to correct size & shape, binding with 18 gauge G.I. wire at each intersection and placing at any position, at any height and depth complete in all respects inclusive of cost of all labour, materials, tools, tackles etc. as per drawings, specifications and direction of Site Engineer. : Thermo-Mechanically Treated bars of grade Fe-500 D or more |
| 9 | Cement mortar 1:4 (1 cement : 4 coarse sand) |
| 10 | Cement mortar 1:6 (1 cement : 6 coarse sand) |
| 11 | Powder coated aluminium (Minimum thickness of powder coating 50 micron) |
| 12 | Powder coated aluminium (Minimum thickness of powder coating 50 micron) |
| 13 | Providing and fixing Stainless Steel (Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of the Engineer-in-Charge. [Note: For payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.] |
| 14 | TILE WORK IN CLADDING :Providing and fixing first quality ceramic glazed wall tiles conforming to IS:15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by the Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 Kg/sq.m., including pointing in white cement mixed with pigment of matching shade complete. |
| 15 | Providing and laying ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of first quality conforming to IS:15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3 Kg/sq.m. including pointing the joints with white cement and matching pigment, etc. complete. |
| 16 | Size of Tile 500x500 mm |
| 17 | Providing and fixing on wall face Unplasticised Rigid PVC (uPVC) rainwater pipes (110 mm diameter, single socketed) conforming to IS:13592 Type-A, including jointing with seal ring conforming to IS:5382, leaving 10 mm gap for thermal expansion. |
| 18 | Coupler (110 mm) |
| 19 | 1:6 (1 cement : 6 coarse sand) |
| 20 | Two or more coats applied on walls @ 1.25 ltr/10 sqm over and including one coat of Special primer applied @ 0.75 ltr/10 sqm |
| 21 | Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @ 0.80 ltr/10 sqm of approved brand and manufacture. |
| 22 | With cement mortar 1:4 (1 cement : 4 coarse sand) |
| 23 | Nominal concrete 1:3:6 or richer mix (including equivalent design mix) |
| 24 | Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per the directions of Engineer-in-Charge. [Notes: (1) Dismantling shall be allowed during day shift only & prior permission for the same shall be obtained. (2) Providing of necessary covers/ barricades around the work area shall be done prior to dismantling operations. (3) Cutting of all reinforcement shall be done using hack saw or chiesel or any other method as approved by the Engineer-in-Charge] |
| 25 | Disposal of moorum/ building rubbish/ malba/ similar unserviceable, dismantled or waste material by mechanical transport including loading, transporting, unloading to designated location/ approved municiple dumping ground for lead up to 10 Km and for all lifts, complete as per directions of the Engineer-in-Charge. [Note: This item shall also be applicable in urban areas having directions for restricted hours for movement/ plying of load carrying motor vehicles of 3.5 cum or more.] |
| 26 | Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead. |
| 27 | W.C. pan with ISI marked white solid plastic seat and lid. |
| 28 | White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps |
| 29 | 10 litre capacity - White |
| 30 | 15 mm nominal dia pipes |
| 31 | 20 mm nominal dia pipes |
| 32 | 25 mm nominal dia pipes |
| 33 | 15 mm dia nominal bore |
| 34 | 20 mm dia nominal bore |
| 35 | 25 mm dia nominal bore |
| 36 | 25 mm nominal dia pipes |
| 37 | Providing and fixing White Vitreous China Wash basin size 550x400 mm with C.I. brackets, 15 mm dia CP Brass single hole basin mixer of approved quality and make, including painting of fittings and brackets, cutting and making good the walls wherever required. |
| 38 | Providing and fixing White glazed fire clay kitchen sink of size 600x450x 250 mm with C.I. brackets, C.P. brass chain with rubber plug, 40 mm C.P. brass waste complete, including painting the fittings and brackets, cutting and making good the walls wherever required : |
| 39 | Oval shape 450x350 mm (outer dimensions) |
| 40 | Rectangular shape 1500x450 mm |
| 41 | Providing and fixing PTMT liquid soap container 109 mm wide, 125 mm high and 112 mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colour, weighing not less than 105 gms. |
| 42 | Supplying, fabricating and fixing M.S. structural steel work made of joists, tubes, pipes, channels, angles, plates, flats, bars etc., for struts, chain link fencing posts as per drawing including gate, ladders, safety grills, walkways, collapsible gate, signboards, supports for cable trench, making slots for barbed line, wire hoisting, placing in position, embedding in concrete, applying two coats of epoxy paint \\"EPILUX 155\\" High Build Enamel over a coat of EPILUX 610 Primer of M/s Berger or any other approved equivalent make as per manufacturer’s recommendation, complete in all respect including cutting to required size welding of joints, fixing anchor plates,bolts, theading, nuts, washers, sleeves etc. and necessary lettering of approved pattern on main gate, signboards etc.complete in all respects inclusive of cost of all labour, materials, tools, tackles etc. as per drawings, specifications and directions of the Engineer-in-Charge. (excluding the cost of concrete work). |
| 43 | Supplying steel structural items at site such as joists, tubes, pipes, channels, angles, beams, plates, flats, square/ rectangular hollow sections, bars, MS gratings, chequered plates, C.I. Rollers, bolts & nuts, washers, grouting/ foundation bolts, etc., fabrication and erection/fixing of structures such as saddle supports, pipe supports, valve supports, platforms, walkways, stairways, crossovers, struts, chain link fencing posts, gate, collapsible gate, ladders, safety grills, signboards, supports for cable trench, cable racks, cable tray support, push button control posts, supporting structures etc. as per drawing including drilling holes, making slots for barbed line, wire hoisting, placing in position, embedding in concrete etc. including surface preparation using abrasive blast cleaning or power tools cleaning, priming and painting the finished structure by applying one coat of High Build Epoxy Zinc Phosphate Primer (min. 50 µm), one coat of Self-primed, surface tolerant, High build Epoxy mastic (min. 150 µm) and one finish coat of Isocyanate Aliphatic Poly-Urethane(PU) Finish Paint (min. 50 µm) (Total DFT: 250 µm), including supply of all inputs such as labour, materials, consumables, tools and tackles, welding electrodes, paints of approved make as per vendor list in the tender,cutting to required size welding of joints, fixing anchor plates,bolts, theading, nuts, washers, sleeves etc. and necessary lettering of approved pattern on main gate, signboards etc. necessary to perform and complete the work in all respect, in accordance with drawings, specifications and instructions of the Site Engineer/ EIC. Note: This item is excluding the cost of concrete work. |
| 44 | Supplying, fabricating, erecting, placing and fixing in position M.S. structural works using rolled/ built up sections for truss, claddings, bracings, purlins, supporting frames made of joists, tubes, pipes, channels, angles, plates,flats, bars etc. including cutting to required size, welding of joints, fixing anchor plates, including bolts, theading, nuts, washers, sleeves, etc. including preparation of detailed fabrication drawings & submitting to the Engineer-in-Charge for approval before start of fabrication, supplying & applying painting with epoxy mastic 100 micron, MIO 100 micron, 2 coats of Polyurethane (PU) with 50 micron in each coat over a coat of EPILUX 610 primer of M/s BERGER or (for coastal area) any other approved equivalent make as per manufacturer’s recommendations, complete in all respects inclusive of cost of all labour, materials, tools, tackles etc. as per drawings, specifications and directions of the Engineer-in-Charge. (excluding the cost of concrete work). |
| 45 | Earth work in surface excavation (not exceeding 30 cm in depth but exceeding 1.5 m in width as well as 10 sqm on plan) in all kinds of soil including getting out and disposal of excavated earth up to all lead and lift, as directed by the Engineer-in-Charge. |
| 46 | Providing and fixing C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms : 15 mm nominal bore |
| 47 | Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms : 15 mm nominal bore |
| 48 | Bib Cock (Ref. Make: JAQUAR, Model: Cat. No. 0021 or approved equivelent) |
| 49 | Providing and fixing of graphics/ signages (including printing of direction, entry, exit, department name, etc.) with self glowing/ back lit signs 12\\"x6\\" as per specification and directions of the Engineer-in-Charge. |
| 50 | Removal of garden waste by TATA 407 or equivalent capacity vehicle including loading/ unloading, carriage up to 1.0 Km lead & disposal at designated place etc. complete as per direction of the Engineer-in-Charge. [Note: Unit \\"EA\\" shall mean \\"PER TRIP\\"]. |
| 51 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. |
| 52 | One coat |
| 53 | Two coats |
| 54 | One coat |
| 55 | Two coats |
| 56 | With water thinnable cement primer on wall surface having VOC content less than 50 grams/ litre. |
| 57 | Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. |
| 58 | 1:6 (1 cement : 6 fine sand) |
| 59 | Providing Hydra ( 10-12 TON capacity ) along with belts, chains, hooks etc at site for shifting heavy material or equipments like pipes, welding machine, cold cutting machine etc.The rate is inclusive of mobilisation and demobilisation cost, hiring and running cost, fuels, consumables, lube oil cost, operator cost etc., as per direction of EIC. Payment towards equipment running charges shall be made only if payments are not covered in any of the SOR items elese where in this contract. |
| 60 | Wage Payment |
| 61 | Wages of 1 nos semi-skilled manpower to be paid on monthly basis for attending day to day maintenance requirement at any Station. It includes Minimum basic wages (including PF, ESI and Bonus)(B-Class City) FIXED (NOT FOR QUOTE) |
| 62 | Wages of 3 nos unskilled manpower to be paid on monthly basis for attending day to day maintenance requirement at any Station. It includes Minimum basic wages (including PF, ESI and Bonus)(B-Class City)FIXED (NOT FOR QUOTE) |
| 63 | For working beyond normal working hours by 1 no. semi-skilled manpower. (B-Class City)FIXED (NOT FOR QUOTE) |
| 64 | For working beyond normal working hours by 3 no. unskilled manpower. (B-Class City) FIXED (NOT FOR QUOTE) |
| 65 | Supervision & Logistic Charges |
| 66 | material supply for Housekeeping, hygien |
| 67 | Cello or equivalent Kleeno Cobweb Brush with Telescopic Rod | Extendable Broom featuring Long Stainless Steel Handle for Fan, Ceiling, and Roof Cleaning |
| 68 | Weaves Large Size (60x90 cm) Door Mat for Home Entrance, Outdoor Rubber Mat - Non-Slip, Anti Skid Foot Mat, Dirt Trapper, Heavy-Duty, Waterproof Doormat |
| 69 | Anti Skid PVC Rubber Floor Mat | Multipurpose Waterproof | Durable Non-Slip Carpet,Rainmat & Doormat for Indoor & Outdoor Use ,2x5ft |
| 70 | Scotch-Brite or equivalent Double Sided Toilet Brush with long handle, cleans inside the rim, Easy to hang, suitable for indian and western toilet (Green Pack Of 1) |
| 71 | Gala or equivalent brand Dustpan for Floor Cleaning, Dustpan for Broom ,Flat scoop (Color May Vary) |
| 72 | Gala Phool Jhadu | Natural Grass Broom Stick for Home Cleaning | Eco-Friendly Long Handle Jhadu | Anti Dust, Lightweight & Durable Pack of- (1, Gold) |
| 73 | Traditional Coconut Broom Stick Leaf Grass 40 inch Long Broomstick Washable Seekh Jhaadu with Firm & Comfortable Grip Ideal for Wet Surface Cleaning (1 Pc, 350Gm, Random Colors) |
| 74 | Floor Cleaner Liquid, Citrus - 5 Litre | Suitable for All Floor Cleaner Mops |
| 75 | NaphClean or equivalent Naphthalene Balls for Clothes, Wardrobe, Bathroom, 50 Grams, Multicolor, Moth Repellent |
| 76 | All Out Ultra Liquid Vaporizer, Machine + 1 Refill (45ml) |
| 77 | All Out Ultra Power+ Floral Fragrance (Single Refill) 45ML |
| 78 | Hit Flying Insect Killer - Mosquito & Fly Killer Spray (625Ml) |
| 79 | Odonil Bathroom Air Freshener Zipper Mix - 50g (10gx5) | Assorted Pack |
| 80 | Spin Mop Stick for Floor Cleaning with Extendable Handle Rod Replace Old Pocha with Easy Mopping Cleaner for Mop |
| 81 | Gala Aqua Spin Mop with 4 Wheels & Big Bucket with 2 Microfiber Refills, Floor Cleaning Mop with Bucket, pocha for Floor Cleaning, Mopping Set |
| 82 | Gala Scrub Pad - 10 x 7.5 cm - 5 Count |
| 83 | Gala Microfiber Cleaning Cloth/ Towels Set of 4 |
| 84 | Colin 1 Litre Refill , Glass and Surface Cleaner Liquid |
| 85 | Livronic or equivalent Wet & Dry Mop Refills for 18-Inch Mop (2 Pcs Only)– Super Absorbent Cotton/Microfiber/Viscose Replacement Pads, Washable & Reusable Floor Cleaning Refills for All Surfaces (Pack of 1) |
| 86 | Inuvik or equivalent Microfiber Wet & Dry Cotton Pad Floor Mop 75x14x6(18-Inch Head) with 4 Feet Telescopic handle Floor Cleaning Mop(Set of 1)(18 INCH Full Set) |
| 87 | Dettol Liquid Handwash Refill - Original Hand Wash- 675ml |
| 88 | ARISTO or equivalent brand Plastic Swing Lid Small Dustbin 16 Litre Green (29.3 x 22.5 x 40.5 CM) |
| 89 | GAINDA Black Disinfectant Phenyl Liquid Streak-free Surface Floor Cleaner for Hospitals, Homes, Offices & Commercial Use Ready to Use Solution Removes Dirt, Grime & Germs, 1000 ml |
| 90 | Harpic 1 Litre - Marine, Disinfectant Toilet Cleaner Liquid |
| 91 | Colin Glass and Surface Cleaner Liquid Spray - 500 ml |
| 92 | Godrej aer Spray | Room Freshener for Home & Office - Cool Aqua or other fragrances (200 ml) | Long-Lasting Fragrance |
| 93 | Dettol Liquid Handwash Dispenser Bottle Pump - Original Hand Wash- 200ml | Germ Defence Formula Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 17, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 31, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 5 daysNov 02, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 7 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender