Defence Statutory Bodies & Commissions/Committees Closing in 1 days TDR #58114380

Tender For Special Repair To Gents Washroom At Si Lines Under Ge Bhopal

Issued by Statutory Bodies & Commissions/Committees · Bhopal, Madhya Pradesh
Tender Value
4.19 Lakhs
Estimated cost
Bid Submission
23 Nov 2026
1 days left
EMD
9000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Bhopal → Madhya Pradesh
EMD Exemption
Available
Quantity
Not Available

Project Description

Tender For Special Repair To Gents Washroom At Si Lines Under Ge Bhopal

Corrigendum

Sr No Corrigendum Date Corrigendum Type New Submission Date
1 23-Oct-2026 Date Revised Date 07-Nov-2026
2 07-Nov-2026 Bid Auto Extn Corrigendum Bid Auto Extn Corrigendum 14-Nov-2026
3 14-Nov-2026 Bid Auto Extn Corrigendum Bid Auto Extn Corrigendum 19-Nov-2026
4 19-Nov-2026 Bid Auto Extn Corrigendum Bid Auto Extn Corrigendum 23-Nov-2026

BOQ

Name of Work:- SPL REPAIR TO GENTS WASHROOM AT SI LINES UNDER GE BHOPAL
Sl. No. Item Description
1Note :(i) Please refer Sch A/ BOQ Notes before quoting the tender for all phases/ items mentioned below.(ii) Amount of Schedule of credit shall be deducted offline
2Demolition of concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) and removing outside MD land complete all as specified and directed.
3Taking down chowkhats or frames with shutters (without taking off shutters from the frames) exc 1.5 but n exc 4 sqm each complete all as specified and directed.
4M&L for 605x605mm size frame of anodised aluminium snap grid frame work for false ceiling including G.I. hanger wire 2 mm dia. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners and dismantling of old ceiling frame with board of any type and size all as specified and directed
5M&L for exposed metal frame ceiling with 8mm PVC coated calcium silicate board of siliceous and calcareous material reinforced with cellulose fibre for fixing in 600 mm x 600mm grid complete all as specified and directed.Note:-Frame work shall be measured and paid separately.
6M&L for premium double charge matt finish vitrified tiles 9-10mm thick (area of each tiles n exc 0.36 sqm each) in floors and skirting fixed with 3mm spacers set and jointed in neat cement slurry over and including 15mm thick screed bed or bedding layer in CM (1:6) and pointed with epoxy tile grout filling of approved make and color including dismantling of old tiling fixed in any mortar and position all as specified and directed.
7M&L for coloured glazed ceramic tiles in vertical surfaces 350x250x7mm/450x350x7mm thick set and jointed in neat cement slurry and pointed with white or coloured cement over and including 10mm thick rendering or bedding layer of cement mortar 1:4 including dismantling old tiles complete all as specified and directed
8M&L for 25mm thick in PCC 1:2:4 type B-0 (using 12.5mm gradded stone aggregate) as in bedding layer for laying in floor as in levelling course complete all as specified and directed.
9M&L for 18-20 mm thick granite (of approved texture and colour ) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking plat forms and like in cement mortar (1:4) including point ing in white cement (1:2) using marble dust with admix ture of pigment to match with shade of granite complete all as specified and directed.
10M&L for 50mm thick Sand stone slabs in sun-shades, chajjas,shelves, cills, landings,cover stones, templates, platform bases etc.n exc. 2m in length,punched dressed on face and along exposed edges, self faced on other side and set and pointed in lime mortar 1:2 or cement mortar 1:4. complete all as specified and directed.
11S&F of 10mm thick frosted toughened glass as partitions or fixed glass and similar work including cutting to shape, drilling holes required and necessary fitting/ fixtures required complete all as specified and directed.
12S&F in repair vitreous china Cascate type single piece WC With inbuilt cistern with UF soft close seat Cover, Hinges, dual flush cistern fittings and ccessories Set complete all as specified and as directed. Make: Cat Part no LYS-WHT-38751S250UFSMZ / OPS-WHT-15753NS250UFSMZ of jaguar or equivalent make Cera/Parryware/Kohler as approved by GE.
13S&F in repair vitreous China over counter (table top) wash hand basin, white, oval or rectangle shape including PVC connection and CP waste coupling and PVC corrugated waste pipe upto floor trap level complete all as specified and as directed. Make: Cat No. FSS-WHT-29901 / LYS-WHT-38901N) of Jaquar or equivalent make (Kohler Cat No. K-2661IN-7) OR (Duravit Cat No.0358600079) as approved by GE.
14S&F in repair fancy type 15 mm bore automatc sensor operated CP Pillar taps with long extension body (suitable for counter top WHB), screwed down high pressure, with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and directed. Make: Jaquar Cat No. ORP-CHR-0011BPM) of Jaquar or equivalent make (Kohler Cat No. K-22539IN-4-CP) or (Duravit Cat No.MH1080002) as approved by GE.
15S&F in repairs vitreous china urinal half stall type sensor based automatic flushing sysyem with fixing plugs, bedding urinal against wall in cement mortar 1:2 securing urinal to plugs with and incl 60mm long brass screws, pointing around urinal back in white cement, with brackets, flush pipe, and union for discharge pipe, PTMT spreader and PTMT waste coupling 32mm & waste pipe, PVC Connection pipe 450mm for flushing complete all as specified and directed. Make: Cat No.JSE-CHR-810UC450X) of Jaquar equivalent make (Kohler Cat No. K-26475IN-ER-0) or (Duravit Cat No. 28090AA00) as approved by GE.
16S&F in repair CP long body Bib taps 15mm bore hole,cast copper alloy with crutch or butterfly handle,screwd down,screwed for iron pipe or brass ferrule and fixed complete all as specified and directed.
17S&F in repair CP brass, fancy type,15 mm bore angle cock with long shank & as concealed type and fixed complete all as specified and directed.Note:- Jaguar/Cera/Parryware/Kohler as approved by GE.
18S&F in repair stainless steel Toilet paper holder with flap of approved make complete all as specified and directed.ote:- Jaguar/Cera/Parryware/Kohler as approved by GE.
19S&F in repair CP two way bib tap 15mm dia fixed in GI/ CPVC tubing of approved make all as specified and directed.ote:- Jaguar/Cera/Parryware/Kohler as approved by GE.
20S&F in repair CP telephonic brass mixer for mixing hot and cold water suitable for pipe of 15mm bore size all as specified and directed.
21S&F in repairs overhead brass chromium plated shower rose 125mm dia with or without swivel joints including fixing to steel pipe all as specified and directed.
22S&F in repair brass CP tubular towel rail 20mm dia, complete all as specified and as directed.
23S&F 5mm thick bevelled edged looking mirror glass of selected quality in required size fixed with suitable SS stud/bracket on walls including coloured light strip all as specified and directed.
24S&F in repair Health faucet( ABS Body) mild steel chromium plated suitable for 15mm dia pipe with 1.25m long flexible tube and ABS wall hook incl making connections and fixed in position complete all as specified and directed.
25S&F in repairs PVC connection 15 mm size, of length 600 mm, with PTMT nuts complete all as specified and directed.
26S&F of CP liquid soap dispenser white color of standard size with necessary fixing screws complete all as specified and directed.
27S&F sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and directed.
28S&F PVC (SWR) floor trap plain with SS grating having dia meter of out let 75mm including jointing with solvent cement complete all as specified and directed.
29Supply & fixing 110 mm bore, PVC (SWR) pipes single socketed in any length with rubber rings joints laid in trenches or in floors of the following bore inculding cutting out wall /concrete and finishing of surface to match existing surface complete all as specified and directed.
30All as per ser Item no 28.00 here-in-before but 75mm bore complete all as specified and directed.
31Supply & fixing 110 mm bore, PVC (SWR) pipes single socketed in any length with rubber rings joints laid in fixed to walls including heavy duty clamps of the following bore complete all as specified and directed.
32All as per ser Item no 30.00 here-in-before but 75mm bore complete all as specified and directed.
33S&F 110 mm bore, PVC (SWR), junction single, (Single T) equal or unequal, jointed with solvent cement complete all as specified and as directed.
34All as per ser Item no 32.00 here-in-before but 75mm bore complete all as specified and directed.
35S&F 110 mm bore, PVC (SWR) bends any radius, jointed with solvent cement complete all as specified and as directed.
36All as per ser Item no 34.00 here-in-before but 75mm bore complete all as specified and directed.
37M&L for preparation of old plastered or unplastered surfaces in walls soffits, facia, chajjas and applying two coat of exterior weather proof water based emulsion complete all as specified and directed.
38M&L complete removal of old decorated surface of wall and applying two coat of oil emulsion distemper white/coloured over and including one coat of white cement based putty all as specified and directed by Engr-in-Charge.
39S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/Ceosetory windows & other Frames/Chowkhat of size 45x85 mm comprising of virgin PVC polymer of K value 58-60(Suspension Grade), calcium carbonate andnatural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance tospread of flame of Class A category with property of being termite/borer proof,water/ moisture proof and fire retardant and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia andlength complete as per direction of Engineer-in-Charge.
40S&F Factory made single extruded WPC (Wood Polymer Composite) solid plain door shutter of 30 mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of ngineer-In-Charge.
41S&F aluminium,anodised barrel tower bolts, with cast or sheet barrel and rolled of size 200mm all as specified and directed.
42S&F 125 mm size extruded aluminium handles, fabricated type polished,complete all as specified and directed.
43S&F 250mm aluminium alloy anodised, sliding door bolt with hasp, staple (bolt type) and fixing clip of sheet,cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed complete all as specified and directed.
44S&F Grating doom 100mm dia of PTMT (Minimum weight 25gms) complete all as specified and directed.
45S&F Grating doom 100 mm dia with waste hole of PTMT. (Minimum weight 40gms) complete all as specified and directed.
46Taking down carefully copper/aluminium point wiring concealed/ casing caping (light, fan, socket or power) including fixtures and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fittings, call bell and removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc all as specified and directed.
47Dismantling/taking down of unserviceable old existing service /submain wire of any size all as specified and directed.
48Taking down LED 2X2 feet panel ceiling light any type and deposited to SI lines E/M office store yard safety without any damge and working condition complete all as specified & directed.
49Taking down carefully serviceable/unserviceable wall fans of any size from its position, and deposited to E/M office store yard all as specified and directed.
50Taking down carefully exhaust fans of any size from its position, and deposited to E/M office store yard all as specified and directed.
51M&L for concealed point wiring for one light or one fan or one exhaust fan controlled by one switch complete with and includidng single core PVC insulated unsheathed flexible conductor FR-LS H cables 1.5 sqmm as per IS 694:2010 ISI marked, annealed multistranded copper conductor drawn through and including medium machenical strees PVC conduit as per IS 9537 (Part-III): 1983 of suitable nominal size as required at site dia but not less than 20mm noninal size including modular / non modular type all accessories/fitting / metal flush box / cover plate/junctiion boxes/ inspection cover etc ISI marked and sunk terminal boxes flush galvanised metal boxes suitable for fixing with 1.5 sqmm copper conductor PVC insulated, unsheathed flexible multistaranded copper conductor FR-LSH cable as continious earth wire connected to metalic body at one end and common earth dolly to other end including cost of cutting chase and making good to distrubed surfaces of wall with cement mortor 1: 3 including necessary plaster and poiinting in cement mortor 1:3 with white wash / distemper/ other painting complete all as specifiecd and as directed Note:- cost of cutting chase and making good shall be included in the quated rates)
52All as per Srl item No 85.00 here-in-before but for one switch socket combination 5/6 amp on independent board complete all as specified and directed.
53All as per Srl item No 85.00 here-in-before but for one three pin socket outlet 5 Amp on same board with other switches complete all as specified and directed by Engineer - in - Charge.
54All as per Srl item No 85.00 here-in-before but for one switch socket combination 6 pin 5/ 15 Amps on independent board with wire of size 2.5 Sqmm and 2.5 Sqmm as earth wire.complete all as specified and directed by Engineer - in - Charge.
55S & F modular switch one way 6 Amp, one module, 240 volts, ISI marked complete all as specified and directed.
56Supply and fixing modular socket outlet 2-in-1, 2/3 pin, 6 Amps, 240 volts, controlled by one switch complete all as specified and directed.
57S & F modular switch one way 16 Amp, one module, 240 volts complete all as specified and directed.
58Supply and fixing modular socket outlet 2-in-1, 2/3 pin, 6/16 Amps, 240 volts, controlled by one switch complete all as specified and directed.
59S&F modular ceiling rose 3 terminals 65x25 mm dia poly carbonate isolated all as specified and directed.
60S&F in replacement curved 6 watt LED warm white adjustable multiple angle mirror light including inbuilt LED driver, new generation, energy saving, environmental friendly, long life aesthetically designed for diffused lighting with high power LED as light source complete all as specified and directed.
61M&L in replacement for sub main wiring (Single phase) with two runs of single core FRLS PVC insulated, unsheathed, mutistranded copper conductor cable of size 6.0 sqmm drawn in and including rigid PVC rigid conduit medium grade of suitable size but not less than 20mm dia with its accessories, including one run of single core FRLS PVC insulated, unsheathed, stranded copper conductor cable of size 6 sqmm as earth continuity and cutting chases to wall as per standard engineering practice & making good the disturbed surfaces as per existing complete all as specified and directed.Notes:-(i) Wiring to be done as per approved colour code in IE rule. (ii) Two runs of 6.0 sqmm cable, one run of 6.0 sqmm cable of earth continuity conductor & PVC conduit pipe shall be measured as one unit length.
62M&L for sub main wiring with approved colour coding as per IS (Red, Black and Green for single phase circuits) with three single core PVC insulated ISI marked FRLS cable 1100V unsheathed with stranded copper conductor of 4.0 sqmm nominal cross section area and drawing into 20mm external diameter rigid non metallic PVC conduit, ISI marked, medium grade, inclusive of all fittings such as tees, bends, junction boxes, elbows, saddles, pipe hooks, couples, lock outs, etc. in concealed wiring system by cutting of walls (brick or stone) and making good disturbed surface of wall in CM 1:3 and PVC insulated stranded copper conductor of 4.0 sqmm nominal cross section area as earth wire complete all as specified and directed. Note : (i)Wiring to be done as per approved colour code in IE rule. (ii) Two runs of 4.0 sqmm cable, one run of 4.0 sqmm cable of earth continuity conductor & PVC conduit pipe shall be measured as one unit length.
63S&F modular combo AC box (including socket ,plug top and 25 Amp MCB's) 240 V,50 Hz an ISI-marked, impact-resistant body and built with high-impact polycarbonate materials that offer high softening temperatures, ensuring long-lasting performance complete all as specified and directed .
64S&F in repair sheet metal enclosure double door type surface mounted concealed in wall 12 ways, 240 Volts, IP 43 ISI marked 200 amps bus bar dust and vermin proof ( IP-54 protection) suitable for incorporation MCBs and isolators etc complete all as specified and directed. NOTE:- MCB shall be measured and paid separately.
65S&F in repairs MCB SP suitable for 240 volts, AC supply 6 to 32 Amps, with over load and short circuit protection and rupturing capacity not less than 10KA 'C' curve connection with suitable size copper lugs curve including complete all as specified and directed.
66S&F in repair MCB SPN suitable for 240 volts, AC supply 40 Amps, with over load and short circuit protection and rupturing capacity not less than 10KA 'C' curve connection with suitable size copper lugs complete all as specified and directed.
67S&F exhaust fan, PVC body AC single Phase 230V of size 250 mm sweep with, blades, and frame and louvers including cutting of hole in existing wall and resurfacing of disturbed area of wall complete all as specified and directed.
68S&F wall mounted fan of metal body with plastic blades, 400 mm sweep, 1350 rpm, 55 watts, 240 V, 50 Hz, air deliver 65 cubic meter per minute, 5 Nos of speed controlling complete all as specified and directed.
69S&F LED slim square/circular panel light fitting for surface ceiling light 15 watt, colour warm including connected with 3 core 23/0.0076 insulated copper wire from celing rose to fittting connector all as specified and directed.
70S&F in replacement recess mounting LED flat panel 2x2 feet 36 Watt ceiling light white/Warm white in colour,Deep Drawn CRCA sheet steel housing duly powder coated in slim housing with high efficient LEDs and Glare free full opal diffuser IP20 and with system efficacy of 120lm/W with all accessories internally pre-wired and including connecting with PVC insulated multistranded copper conductor cable 0.5 sqmm two core complete all as specified and directed. Note:-Halonix cat part no -HLFPR22-27-36-CW-37mm or equivalant make Bajaj,Crompton,havells. Please Enable Macros to View BoQ information
71S&F in replacement recess mounting LED flat panel 2x2 feet 36 Watt ceiling light white/Warm white in colour,Deep Drawn CRCA sheet steel housing duly powder coated in slim housing with high efficient LEDs and Glare free full opal diffuser IP20 and with system efficacy of 120lm/W with all accessories internally pre-wired and including connecting with PVC insulated multistranded copper conductor cable 0.5 sqmm two core complete all as specified and directed. Note:-Halonix cat part no -HLFPR22-27-36-CW-37mm or equivalant make Bajaj,Crompton,havells. Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 58114380
AUTHORITY Statutory Bodies & Commissions/Committees
TENDER VALUE 4.19 Lakhs
LAST DATE 23-11-2026
Authority
Authority Name Military Engineer Services
Work Description Tender For Special Repair To Gents Washroom At Si Lines Under Ge Bhopal
Basic Detail
Tender No 8694/E8
Bidding Type Tender
Location
City Bhopal
State Madhya Pradesh
Key Dates
Publish Date 19 Nov 2026
Submission Date 23 Nov 2026
Open Date 25 Nov 2026
Finance
Tender Value 4.19 Lakhs
Tender Fee 500
EMD 9000
Exemption Available
Document List
25885889-aca7-4657-b4b2-245233301999.html
BOQ_891309.xls
credit8694.pdf
Tendernotice_1.pdf
TENDER_DOCU_8694.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Nov 19, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Nov 07, 2026
18:00 IST

Corrigendum-1 Issued

Clarifications on tender conditions and amendments issued.

Completed
Nov 14, 2026
18:00 IST

Corrigendum-2 Issued

Clarifications on tender conditions and amendments issued.

Completed
Nov 19, 2026
18:00 IST

Corrigendum-3 Issued

Clarifications on tender conditions and amendments issued.

Completed
Nov 23, 2026
18:00 IST

Corrigendum-4 Issued

Clarifications on tender conditions and amendments issued.

Upcoming · 1 day
Nov 23, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 1 day
Nov 25, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 3 days

Tender Documents

Download All (ZIP) ↓
html

25885889-aca7-4657-b4b2-245233301999.html

xls

BOQ_891309.xls

pdf

credit8694.pdf

pdf

Tendernotice_1.pdf

pdf

TENDER_DOCU_8694.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender