Tender For Development Of Area In And Around Khadi Kupdi Mandir, Chowki Choura Under Capex Budge 2026-27 ( Priority Works)
Tender Value
30 Lakhs
Estimated cost
Bid Submission
04 Nov 2026
4 days left
EMD
60000
Bank guarantee accepted
Document Fee
600
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Jammu → Jammu and Kashmir
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Development Of Area In And Around Khadi Kupdi Mandir, Chowki Choura Under Capex Budge 2026-27 ( Priority Works)
BOQ
| Sl. No. | Item Description |
| 1 | Earth work in excavation by mechanical means in trenches for foundations, drains, pipes, cables etc. (Not exceeding 1.5 mtr in width) and for shafts, wells, cesspits and thelike not exceeding 10sqm on plan, depth upto 1.5mtr.including disposal of excavated earth upto 1 mtr fromcutting edge, disposed earth is to be levelled and neatly dressed in All kinds of soil complete job. |
| 2 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering . All works upto plinth level 1:5:10mix (1 cement: 5 coarse sand:10 graded stone aggregates) 40 mm nominal size (crushed) |
| 3 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with:1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size. |
| 4 | Stone filling / boulder filling Including cost of stone excluding carriage |
| 5 | Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level with 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) |
| 6 | Reinforcement for R.C.C work including straightening, cutting, bending , placing in position and binding all complete. (using 10 mm dia bars |
| 7 | Centring and shuttering including strutting, propping etc. and removal of form work for foundations, footings, base of columns |
| 8 | Lintel, beams, plinth beams, girders, bressumers and cantilevers. |
| 9 | Steel work welded in built up section framed work including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer. |
| 10 | Proving and fixing of precoated galvanished iron profile sheets (Size shape and pitch of corrugationas approved by Engineer in-charge) 0.50mm (+0.05%)Total coated thickness with zinc coated complete job SOR item 12.23 |
| 11 | Providing and fixing G.I Chain link Fabric fencing of required width in mesh size 50x50mm including strengthening with 2mm dia wire or nuts, bolts and washers as required complete as per direction of Engineer in Charge Made of G.I wire dia 4mm |
| 12 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead upto 50 m and lift upto 1.5 m. |
| 13 | 15mm cement plaster in rough side wall mix 1:6 (1 cement : 6 fine sand). |
| 14 | 20 mm Cement plaster of mix: 13.6.2 1 : 6 ( 1 cement : 6 fine sand) Road side wall plaster |
| 15 | Providing and laying Ceramic glazed floor tiles 300x300 mm (Anti Skid) (thickness to be specified by the manufacturers) of 1st quality conforming to IS: 15622 of approved make, laid on 20 mm thick bed of cement mortar 1: 4 ( 1 cement : 4 coarse sand) including pointing the joints with white cement and matching pigment etc., complete. 11.50.1 In colour such as White, Ivory, Grey, Fume Red Brown |
| 16 | Providing and laying factory made chamfered edge Cement Concrete paver blocks in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50mm thickcompacted bed of sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as per direction of Engineer-in-Charge. 80 mm thick C.C. paver block of M-30 grade with approved color design and pattern. carriage to complete |
| 17 | Providing and laying 60mm thick factory made cement concrete interlocking paver block of M-30 grade made by block making machine with strong vibratory compaction and of approved size and design/shape laid in required colour and pattern over and including 50mm thick compacted bed of fine sand, filling the joints with coarse sand etc. all complete as per direction of Engineer-in-charge |
| 18 | JCB/ Black hoe engaged for eveling of Ground surface |
| 19 | Finishing walls with acrylic smooth exterior paint of required shade on New work (Two or more coats applied @ 1.67 liter/10sqm over and including priming coat of exterior primer applied @ 2.20kg/10sqm) |
| 20 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade.Two or more coat on new work |
| 21 | filling of good earth including diging loading unloading royality carriage spreading in proper lines and grades and consolidation with power road roller complete. |
| 22 | carriage of sand for a distance 25 km by mt |
| 23 | carriage of stone aggregate for a distance of 25 km by mt |
| 24 | carriage of stone for a distance of 20 km by mt Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 17, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 04, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 4 daysNov 05, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 5 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender