Tender For Special Repair To Bldg No T-77 And T-81 At Jat Hill Zakhama Mil Stn.
Tender Value
29.78 Lakhs
Estimated cost
Bid Submission
07 Nov 2026
11 days left
EMD
59600
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
zakhama → Nagaland
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Special Repair To Bldg No T-77 And T-81 At Jat Hill Zakhama Mil Stn.
BOQ
| Sl. No. | Item Description |
| 1 | Demolition of brickwork built in cement mortar including all quoins, arches, pillars etc. complete all as specified and as directed at site |
| 2 | Material and labourfor brick work with sub class B ricks straight or curved on plan exe 6 m mean radious built in cement mortar 1:6 complete all as specified and directed at site. |
| 3 | Taking out old unserviceable floor, hearth or wall tiling including cement mortar bedding and rubbish off the premises complete all as specified and as directed at site |
| 4 | M& L for Non - skid Coloured Ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including Screed bed or bedding layer of mortar 15 mm thick for laying floor finishes in Cement mortar (1:6) complete all as specified and as directed at site |
| 5 | M&L for cloured Glazed ceramic tiles in vertical surface such as skirting /Dado 450X 300X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match including 10mm thick cement plaster in CM(1:4) complete all as specified and as directed at site |
| 6 | Dismantling of plain or corrugated steel sheeting, any gauge, thickness, including similar pattern roof covering complete all as specified and as directed at site |
| 7 | M&L Pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensil strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping complete all as specified and as directed at site |
| 8 | M&L Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in ridge/valley gutterl, fixed with self tapping screws complete all as specified and as directed at site |
| 9 | S&F 0.63 mm thick palin galvanised, mild steel sheeting, in steepped flashing/wall (measured as the minimum rectangle from which the place can be cut) etc complete all as specified and directed at site. |
| 10 | M&L in repair for Timber framed and fixed clean sawn 2nd class hard-wood in scantling fixed complete all as specified and as directed at site. |
| 11 | Dismantling of boarding, any description,fixed in any position with nail, complete all as specified and directed at site. |
| 12 | Material and labour for 2nd class hard wood weather boarding, clean swan, thickness 20mm to 25mm and rebated on thick edge to give 20 mm laps and fixed , complete all as specified and directed at site. |
| 13 | Dismantling wall and ceiling boards (fibre, pulp, insulation etc) or insulation boards / slabs / blankets any thickness including cover fillets complete all as specified and as directed at site |
| 14 | M&L for 4mm thick plywood, grade BWR, type BB, fixed with screws to timber frame work fixed with screws to timber frame work complete all as specified and as directed at site |
| 15 | Supply and fix 4mm thick Non asbestos fibre cement building boards fixed or laid/ inserted to GI snap grid frame work(size of 605x605mm) for false ceiling including suspenders/hangers 6mm dia GI wire(upto 1200mm length) adjusting level fixed to roof shads by means of ceiling cleats made out of GI flat 40x3 mm size 60mm long and expansio hold fasteners 12.5mm dia 40mm long complete all as specified as per manufacturers instruction complete all as specified and as directed at site |
| 16 | M&L including preparation and treating two coats of synthetic enamel paint over a coat of pink primer to new wood and wooden surface exceeding 10cm width or girth complete all as specified and as directed at site |
| 17 | M&L including preparation and treating one coat of synthetic enamel paint on old painted wood and wooden surface exceeding 10cm width or girth complete all as specified and as directed at site |
| 18 | Taking down plastering in cement lime or cement mortar complete all as specified and as directed at site |
| 19 | M&L rendering 15mm thick on fair faces of brick work or concrete surfaces in CM 1 : 4 mixed with WPC @ 3 % by the weight of cement used and finishing even and smooth without using extra cement complete all as specified and as directed at site |
| 20 | M&L rendering 10mm thick on fair faces of brick work or concrete surfaces in CM 1 : 6 and finishing even and smooth without using extra cement complete all as specified and as directed at site |
| 21 | Supply only water proofing compound ISI Marked complete all as specified and as directed at site |
| 22 | M& L for Preparation of new plaster surface of walls and applying two coats of oil bound distemper over a coat of white cement primer complete all as specified and as directed at site |
| 23 | M&L for preparation of newly plastered surface of walls and applying two coat of cement base paint over one coat of white cement primer complete all as specified and as directed. |
| 24 | M&L for preparation of old painted steel surfaces of any description over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed at site. |
| 25 | M&L for preparation of new steel surfaces of any description over 10cm width or girth and applying two coat of synthetic enamel paint over one coat of red oxide, complete all as specified and directed at site. |
| 26 | Demolition of Cement Concrete(Un- Reinforced) of any description and in any position not otherwise specifically provided for complete all as specified and as directed at site |
| 27 | Materials and labour for 75mm thick PCC (1:3:6) type C2 (using 40 mm graded stone aggregate) as in sub base/pavement/plinth protection finished the surface fair and even complete all as specified & directed. |
| 28 | M&L for chequered cement concrete tile of size 250x250x25mm thick over 15 mm thick screed bedding layer of mortar in CM (1:6) for laying floor finishes set jointed with grey cement and pigment and pointed in neat cement slurry in floors,complete all as specified and directed at site. |
| 29 | Taking down Shutters of any description n.exc 1 sqm each complete all as specified and as directed at site |
| 30 | Taking down Shutters of any description exc 1 sq. m but n exc 2 sq m each complete all as specified and as directed at site |
| 31 | S&F factory made flush door shutter 35 mm thick solid core construction, with block board core and plywood face panels, commercial type on both sides all as specified and directed at site |
| 32 | S &F factory made 2nd class hardwood 30mm thick glazed and skeleton window/door shutter any numbers but divided into squares, with plain, chamfered or rounded, mitred and rebated sash bars, with plain, chamfered or rounded mitred and framing plain, chamfered or rounded, fitted with cut and metered beads for securing glass etc size of members of shutters as specified in SSR Part I Sec 8 clause 8.24 (b) complete all as specified and as directed at site |
| 33 | S&F 3 mm thick sheet glass ordinary quality and glazing with oil putty in square n exc 0.5 ssqm in each pane, complete all as specified and directed at site. |
| 34 | Supply and fixing mild steel galvanized iron wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.00 and fixed with tinned tacks or staples complete all as specified and as directed. |
| 35 | S&F Butt hinges, heavy weight, cold rolled mild steel, and fixed 100mm size. complete all as specified and as directed at site. |
| 36 | S&F Butt hinges, heavy weight, cold rolled mild steel, and fixed 75mm size. complete all as specified and as directed at site. |
| 37 | S&F extruded aluminium alloy handles, fabricated type, anodised 100mm size., complete all as specified and as directed at site. |
| 38 | S&F extruded aluminium alloy handles, fabricated type, anodised 150mm size. , complete all as specified and as directed at site. |
| 39 | M&L in repair Prelaminated Particle Board 18/19 mm thick, exterior grade bonded with Phinol for meldehuged resin interior grade, prelaminated one side with decorative choice lamination & other side balancig white lamination, fixed with nails for pelmet boxes , complete all as specified and as directed at site. |
| 40 | Supply and fixing as in replacement 19/20mm dia stain less steel chromium plated curtain rods with and including fixing bracket and socket complete all as specified and as directed at site. |
| 41 | Supply & fix in repair vitreous china wash basin with padestal , white flat size 550x400mm incl bracket cutting for and pining in ends of brackets or erecting stand including PVC connection pipe 15 mm bore 450 mm long , waste coupling of PTMT complete all as specified and directed. |
| 42 | S&F in repair bib taps cast copper alloy chromium plated fancy type with crutch or butterfly handle screwed down screwed down for iron pipe 15 mm bore complete all as specified and as directed at site |
| 43 | Supply and fix in repair 15 mm stop cock fancy type, chromium plated each with long screwed (long body) shank and cup, complete all as specified and as directed at site |
| 44 | Supply and fix in repair 15 mm CP mixer for mixing hot & cold water screwed down for iron pipe and fixed including three joint to steel pipes or union and pluging and screwing to wall, complete all as specified and as directed at site |
| 45 | Supply and fix in repairs 15mm bore medium grade galvanized steel tubes with all fittings and fixed to wall and celing or laid in floors etc complete all as specified and as directed. |
| 46 | Supply and fix in repairs 20mm bore medium grade galvanized steel tubes with all fittings and fixed to wall and celing or laid in floors etc complete all as specified and as directed. |
| 47 | S&F in repairs Towel Rail 600mm long of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats. (Minimum weight 190gms) complete all as specified and as directed at site. |
| 48 | S&F in repairs Grating doom 100mm dia of PTMT (Minimum weight 25gms) complete all as specified and as directed at site. |
| 49 | Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, etc. removing materials for taking credit and making good disturbed surfaces of walls, floors, etc.etc complete all as specified and directed at site. |
| 50 | Material and labour for point wiring (surface type) for one light/fan/call bell point with 1.5 sqmm PVC insulated (FR-LS) unsheathed copper cable multistranded conductor 1100 volts grade controlled by one way switch including 1.5 sqmm PVC (FR-LS) insulated unsheathed copper cable multistrand conductor 1100 volts grade for continuity earth wire connected to common earth dolly drawn through and including PVC casing caping of suitable size with all accessories and PVC rectangular boxes for mounting switch, socket and fan regulator etc complete all as specified and as directed. Note: (i) Wiring shall be done in proper colour coding using red , yellow, blue for phase, black for neutral and green for earth. |
| 51 | All as per item No 50 above but for 15 Amp Socket c by using 2.5 sqmm copper cable with 2.5 sqmm copper conducter as earth continuty, complete all as specified and directed at site. |
| 52 | All as per item No 50 above but for 3 pin, 5 Amp Socket on the same board, complete all as specified and directed at site. |
| 53 | S&F in switch paino flush button single pole one way 5 amp, complete all as specified and directed at site. |
| 54 | S&F in switch paino flush button single pole one way 15 amp, complete all as specified and directed at site. |
| 55 | Supply & fixing socket outlet flush type 5 pin 5 Amp multipurpose, 230 volts single pole one way suitable for 3 pin /2 pin 5 Amp plug, complete all as specified & as directed. |
| 56 | Supply & fixing socket outlet flush type 5 pin 5 Amp multipurpose, 230 volts single pole one way suitable for 3 pin /2 pin 15 Amp plug, complete all as specified & as directed. |
| 57 | Supply and fixing in repair Integrated LED Bulk head fitting with luminaire of 10W, 6000 K with Pressure Die Cast Aluminium Housing, IP54 protection, heat resistant glass cover, high power LEDs as light source, electronic driver and connecting up with three core PVC insulated, sheathed flexible copper conductor cable of size 1.5 Sq.mm complete all as specified and as directed. Note: Light fitting shall be of PF>0.95 |
| 58 | Supply and fixing ceiling rose, PVC/polycarbonate, isolated body surface bakelite, 65mm x 25mm, ISI marked three terminals complete all as specified & directed. |
| 59 | M&L for Lamp holder,PVC/Polycarbonate type with back plate suitable for battern fitting , complete all as specified & as directed. |
| 60 | Supply and fixing in repair Lumino LED lamp 9w WE 27 w Ball lamp lumen output 810 lm 6500 k color temp current 0.005 amp,complete all as specified & directed at site. |
| 61 | Supply and fixing in repairs Surface & wall mounted Energy efficient LED Tube Light Fitting, of 20 W, 6500 K of cool white, with extruded aluminium / CRCA housing and robust construction with necessary acrylic diffuser & integrated electronic driver, all accessories internally prewired and connecting up with twin core PVC insulated, sheathed flexible copper conductor cable of size 1.5 Sq.mm and making good the disturbed surfaces to match with existing complete all as specified and as directed. Note: Light fitting shall be of PF>0.95 |
| 62 | Taking down ceiling fan carefully of any size from its original position, kept in safe custody and refixing the fan in same position or at new place including cleaning and connecting up with twin core PVC insulated, sheathed flexible copper conductor cable of size 1.5 Sq.mm complete all as specified and as directed at site. |
| 63 | Supply and fixing in repair stepped rotary type electronic fan regulator, AC240 voltcomplete all as specified and as directed at site. |
| 64 | Taking down old unserviceable DB/Main switchs incl MCB wooden block of any size and type and removing , complete all as specified & as directed. |
| 65 | Supply & fixing PVC rectangular block of size 250x200x50mm depth, complete all as specified & as directed. |
| 66 | Supply & fixing sheet metal encloser for DB when MCB to be used 8 way 200 , Amp rated bus bar, SPN 240 V, double door , complete all as specified & as directed. |
| 67 | Supply & Fixing of MCB SP of capacity 40 Amps, 240 V, 10 KA 'C' curve complete all as specified and directed. |
| 68 | Supply & Fixing of MCB SP of capacity 6-32 Amps, 240 V, 10 KA 'C' curve complete all as specified and directed. |
| 69 | Supply& fixing, in repair 1100 volts, grade (heavy duty)cable PVC insulated stranded aluminium conductor surved with inner sheathing of PVC tape and overall PVC sheathed in services connections suspended by insulating hangers not moe than 1 meter apart including 4 mm suspension wire, one twin core cable flat or round or 10 sqmm cable , complete all as specified and as directed. |
| 70 | Material and Labour in repair for House service bracket (hook type complete with 3.0m long G.I. pipe 40mm dia Medium grade, two nos. 90 degree bends, M.S. hook and stay or guy including dismantling of existing old unserviceable house service brackets, any type complete all as specified and as directed. |
| 71 | Materials and labour for earthing complete with galvanised iron earth plate electrode 600 mm x 600 mm x 6 mm thick, burried directly and preferably vertically in ground, earth pit not less than 2.25 Mtr deep below ground level with top edge of the plate not less than 1.5 m below ground level connetced with galvanised wire of 4mm dia by means of nuts, bolts, check nuts and washers made of galvanised iron or steel earthing lead to be protected by galvanised iron pipe of 15mm bore (light grade) and other end connected to earthing test point or lightening arrestor or main controlling switch as directed including providing funnel with 20mm bore galvanised iron pipe (medium grade), wire mesh, charcoal or coke and common salt in alternate layer of 15cm (compacted thickness) all round the earth electrode, concrete earth pit in PCC (1:3:6) type C-1 (with 20mm graded aggregate), 50mm thick precast RCC (1:2:4) cover slab (re-inforced with 8mm dia TMT bar @ 15 cm C/C bothways and suitable handle made of 10mm dia) including necessary earth work in excavation, returning filling and removal of surplus earth upto a distance not exceeding 50 m etc all as shown on electrical plate No. 3 of MES Schedule Part-I(2009) complete including testing on completion including taking down old unserviciable earthing set all as specified and as directed.Notes:-(i) Main earthing strip from earth plate electrode to rest point upto length of 7.5 meters length shall deemed to be included in the unit rate quoted against this item. (ii) On testing after completion if the desired resistenance is not obtained the contractor shall redo the earthing without any extra cost to the department Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 17, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 07, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 11 daysNov 14, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 18 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender