Tender For Addition/Alteration To Building No P-228B At Af Stn Sirsa
Tender Value
43.78 Lakhs
Estimated cost
Bid Submission
31 Oct 2026
9 days left
EMD
87560
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Sirsa → Haryana
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Addition/Alteration To Building No P-228B At Af Stn Sirsa
BOQ
| Sl. No. | Item Description |
| 1 | SCHEDULE 'A' PART-I (B&R WORKS) |
| 2 | Demolition Brick work built in Cement Mortar and in any Position including all Quoins, Arches and Pillars, etc., and removal of debris outside AF land complete all as specified and directed. |
| 3 | M&L for Brick Work with Fly-Ash Bricks (Old Size Bricks), Straight or Curved on Plan exc. 6.0 Metre mean Radius, built in Cement Mortar 1:4, complete all as specified and directed. |
| 4 | Taking down Cement Plaster including raking out Joints, hacking for Key, scrubbing down with Water and removing Debris, etc. to Outside MD/AF Land, complete all as specified and directed.(Note: This item shall not be considered for brickwork demolished under Item 1.01 above) |
| 5 | M&L for Rendering on Internal Walls, 12mm thick in cement mortar 1:6 on Brick Walls or on Concrete Surfaces, Plastered Surfaces finished Even and Smooth without using Extra Cement complete all as specified and directed. |
| 6 | M&L for 15 mm thick plastering in two layers, 10 mm + 5 mm in cement mortar 1:4, top layer of 5 mm thickness mixed with with water proofing compound (as per manufacturer's instructions) on external surfaces of brick/stone walls or concrete surfaces finished even and fair upto 4 storey height including necessary scaffloding complete all as specified and directed. NOTE : Water Proofing compound shall be measured and paid seperately as \\"Supply only\\". |
| 7 | M&L for Rough Cast Plaster on Brick Walls consisting Under Coat of Cement and Sand Mortar 1:3 not less than 10mm thick (mixed with liquid water proofing compound as per manufacturer's instriuctions) and while it is still in Plastic state the Rough Cast Mixture consisting of Crushed Stone or Fine Gravel mixed with Coarse Sand and Cement in the Ratio 1:1:1 shall be applied and finish Even, complete all as specified and directed.NOTE : Water Proofing compound shall be measured and paid seperately as \\"Supply only\\". |
| 8 | Supply only Liquid Water Proofing Compound, ISI Marked, as approved, complete all as specified and directed. |
| 9 | M&L for complete removal of existing treatment on old decrorated surfaces of walls by scrapping and removing layers of all wall finishes including cleaning, watering to make the surface clean and free from dust, etc including necessary scaffolding, safety and protective measures complete all as specified and directed.(NOTE: This item shall not be considered for areas measured under Item No. 1.03 here-in-before) |
| 10 | M&L for preparing new/undecorated plastered surfaces of walls, applying 1.5 mm thick wall putty in two layers of 0.75mm thickness each, including rubbing down with sand paper to obtain smooth and even surface, applying one coat of suitable primer and finishing with two coats of acrylic distemper of approved shade/tint, complete all as specified and directed by Engineer-in-Charge |
| 11 | M&L for preparation of newly plastered surfaces, applying 1.5 mm thick exterior-grade wall putty, one coat of suitable exterior primer and two coats of exterior acrylic emulsion paint with anti-dust and anti-algae properties, duly tinted to approved shade, to new wall surfaces of any description, over 10 cm width or girth not otherwise described, including scaffolding, safety gear and all incidental works, up to 4 storey height, complete all as specified and directed. |
| 12 | M&L for preparation of new rough cast plastered surfaces and finished with two coats of exterior acrylic emulsion paint (having anti-dust & anti-algae properties) duly mixed with stainer to achieve approved Tint/shade over a coat of suitable exterior primer, applied to new wall surfaces of any description, over 10cm width or girth not otherwise described, as per manufacturer's instructions, up to 4 storey height incl necessary scaffolding safety gear etc complete all as specified and directed. |
| 13 | M&L preparing old Treated/Painted Steel and Iron Surfaces of any description, over 10 Cm width or girth and applying One Coat of Synthetic Enamel Paint (First quality), complete all as specified and directed. |
| 14 | Demolition Cement Concrete (Reinforced) of any description such as roof slab, roof beams, chajjas and similar suspended works, in any position and removing of old reinforcement, debris, etc. to Outside MOD Land, incl necessary scaffolding and safety measures complete all as specified and directed.(Note: Old reinforcement shall be measured under Sch of Credit) |
| 15 | M&L RCC M-30 (Design Mix) in Beams, cantilevers, bands, bressummers, lintels over 1.5m span, complete all as specified and as directed.(NOTE: Reinforcement & formwork shall be measured and paid separately) |
| 16 | M&L for formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc for rough finished surfaces complete all as specified and directed |
| 17 | M&L for formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/ PCC bands in walls, horizontal or sloping and similar work exc 10cm but n exc 20cm wide for rough finished surfaces complete all as specified and directed |
| 18 | M&L for TMT steel bars 10mm dia and over, of grade Fe 500D, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed |
| 19 | M&L for TMT steel bars 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders cut to length, of grade Fe 500D, bent to shape required as in reinforcement and binding with MS wire (annealed) not less than 0.9mm dia complete all as specified and directed Please Enable Macros to View BoQ information |
| 20 | M&L for TMT steel bars 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders cut to length, of grade Fe 500D, bent to shape required as in reinforcement and binding with MS wire (annealed) not less than 0.9mm dia complete all as specified and directed Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 17, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 31, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 9 daysNov 02, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 11 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender