Tender For In Year 2026-27 Road Safety Work Of Jalaun Bhind Road (Sh-70)
Tender Value
41 Lakhs
Estimated cost
Bid Submission
23 Oct 2026
2 days left
EMD
4.10 Lakhs
Bank guarantee accepted
Document Fee
3360
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Aligarh → Uttar Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for In Year 2026-27 Road Safety Work Of Jalaun Bhind Road (Sh-70)
BOQ
| Sl. No. | Item Description |
| 1 | Road DelineatorProviding and fixing of Standard Metal Delineator as per IRC 79-2010 consisting of minimum retro reflective unit exposed area of 230 square cm in white colour, full cube corner micro prismatic non-metallic retro reflective sheeting on each side conforming with IRC 67:2012 and meeting the coefficient of retro reflection values as per ASTM D4956 Type XI table specification. The delineator shall be painted with powder coat of minimum 40 microns thickness, on top of which retro reflective sheeting shall be pasted on both sides. The structure shall be manufactured in roll forming process and shall have height not less than 800 mm above the ground, width not less than 100 mm and shall extend not more than 300 mm below the ground while being installed. The front and back faces shall be curved with radius not more than 200 mm and with depth angle between 20 and 30 degrees. The delineator shall have grooves across the length to make reflective sheets vandal-proof. The retro reflective sheeting shall be tested for 3 years outdoor weathering test in Indian conditions as per IRC 67:2012. Rate includes materials, labour, equipment, installation and incidentals complete as directed by Engineer-in-Charge. |
| 2 | 6M Span Over Head Cantilever Structure with 300 dia M.S. one vertical post Supply, fixing & erection of built up Cantilever Structure 6 m span comprising of one vertical post of 6.00 M height made up of 300 mm MS heavy class MS pipe as vertical member welded with 10 mm MS plate at top & 12 mm MS plate at bottom. Horizontal truss comprising 60 mm dia heavy class MS pipe and 40 mm dia heavy MS pipe as bracing & 10 mm MS plate at bottom for fixing to vertical post, as per structural design & drawing, with one coat of steel primer and two coats of synthetic enamel paint. Work includes RCC foundation, earthwork excavation, lean concrete, RCC, foundation bolts, reinforcement and shuttering, installation and erection complete as per relevant MoRTH/IRC specifications and Engineer-in-Charge directions. |
| 3 | Reflective Raised Pavement Markers (Road Studs / Cat Eye)Supply and fixing of reflective raised pavement marker with its body surface made of tough ASA (Acrylic Styrene Acrylonitrile) or HIPS (High Impact Polystyrene) or ABS, supported by a bed of 1335 kg tested in accordance with ASTM D4280. Reflective panels shall consist of lenses containing single or dual prismatic cubes for total internal reflection. Reflecting surface shall preferably be at 35° to 5° to base and area of each retro-reflecting surface shall not be less than 13.0 sq cm. Road stud shall be legibly marked with manufacturer's name/trade mark or other means of identification. Dimensions of road studs should not be less than 100 mm x 100 mm x 10 mm. |
| 4 | Retro Reflective Signs (Type-XI Sheet)Providing and fixing retro-reflective signboards comprising customised modular PU Epoxy Coated MS angle iron frame work, aluminium composite panel (ACP) as base board, micro prismatic retro-reflective sheet and electro-cut coloured overlay film/latex printing. Horizontal and vertical members including inclined outer members of MS frame module shall be made of pair MS angle iron. No panel size shall be more than one sqm and each panel shall be braced diagonally. MS frame module length not more than 3 m. ACP shall have thickness of 4 mm with 0.5 mm thick aluminium skin on both sides. Retro-reflective sheeting shall conform to Type-XI of ASTM D4956-08 and be tested for 3 year outdoor weathering in Indian conditions as per IRC 67:2012. Rate includes all materials, labour, equipment, fabrication, transportation, erection, installation and incidentals complete. |
| 5 | Retro-reflectorised Traffic sign as per IRC-67-2012Providing and fixing of retro-reflectorised cautionary, mandatory and informatory signs as per IRC-67-2012 made of high intensity grade sheeting vide clause 801.3, fixed over aluminium sheeting type-IV 1.5 mm thick supported on mild steel angle iron post 75 mm x 75 mm x 6 mm firmly fixed to the ground by properly designed foundation with M15 grade cement concrete 45 cm x 45 cm x 60 cm, 60 cm below ground level as per approved drawing. Retro-reflective sheeting shall be tested for 3 year outdoor weathering in Indian conditions as per IRC 67:2012 and government test report Shall Be uploaded while quoting tender.(1) 90 Cm equilateral Tringle with Diffrential Plate Size (20cm X 60 Cm) Cautionary /Warning Signs(Speed Limit Board) |
| 6 | 60 Cm Circular with Diffrential Plate Size (20cm X 60 Cm)Mandatory and Reguletry Signs(Speed Limit Board) |
| 7 | 60mm x 60 mm Rectengular with Diffrential Plate Size (20cm X 60 Cm) Informatory Signs (School ,Hospital etc) |
| 8 | 90 Cm high Octagon (Stop Board) |
| 9 | 50X60 cm Single Chevron |
| 10 | 30X90 cm (Left Right Object Hazard |
| 11 | Type - A, “W” : Metal Beam Crash BarrierProviding and erecting a “W” metal beam crash barrier comprising of 3 mm thick corrugated sheet metal beam rail, 70 cm above road/ground level, fixed on ISMC series channel vertical post, 150 x 75 x 6 mm spaced 2 m centre to centre, 1.8 m long with 1.1 m below ground level; all steel parts and fittings to be galvanised by hot dip process, all fittings to conform to IS:1367 and IS:1364, metal beam rail to be fixed on the vertical post with a spacer of channel section 150 x 75 x 5 mm, 330 mm long, complete as per clause 810. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 17, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 23, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 2 daysOct 23, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 2 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender