Tender For Addition/Alteration To Boundary Wall At Gaur Enclave With Retaining Wall Under Ge (West) Lucknow
Tender Value
48.51 Lakhs
Estimated cost
Bid Submission
07 Nov 2026
10 days left
EMD
97100
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Lucknow → Uttar Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Addition/Alteration To Boundary Wall At Gaur Enclave With Retaining Wall Under Ge (West) Lucknow
BOQ
| Sl. No. | Item Description |
| 1 | Item Rate BoQ BoQ_Ver3.0 Item Rate Normal INR Only INR Select, Excess (+), Less (-) Less (-) Tender Inviting Authority: GE (WEST ) Lucknow Name of Work : Addn/Altn to boundary wall at Gaur Enclave with retaining wall under GE (West) Lucknow Contract No: GE/W/LKO/T-110 OF 2026-27 Bidder Name : PRICE SCHEDULE(This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only ) NUMBER # TEXT # TEXT # NUMBER # TEXT # NUMBER NUMBER TEXT TEXT # NUMBER # TEXT# TEXT # NUMBER # NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER # NUMBER # TEXT TEXT NUMBER # NUMBER # DATE NUMBER # NUMBER # TEXT # Sl.No. Item Code / Make Quantity Units Estimated Rate Addition / Deduction Addition / Deduction Values Currency Convertion against each Item Quoted Currency in INR / Other Currency BASIC RATE In Figures To be entered by the Bidder Rs. P Excise Duty VAT Freight Charges ( Unloading & Stacking) Any Other Taxes/Duties/Levies Other Taxes 2 IIIrd Party i.e DGS&D / RITES etc Inspection Charges @0.34%+Service Tax Less for Cenvat Credit,if any respect of Supplies Under full Excise Duty Category TOTAL AMOUNT Without Taxes TOTAL AMOUNT With Taxes TOTAL AMOUNT In Words |
| 2 | Demolition of Brickwork or stone/boulder masonry, built in lime mortar including all quoins, arches, pillars,etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed. |
| 3 | Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed. |
| 4 | Surface dressing n exc 15 cm deep soft/loose soil complete all as specified. |
| 5 | Excavation in trenches n.exc 1.5 m in depth for foundation ,. n.exc. 10 sqm on plan and n.exc 1.5 mtr in depth and getting out complete in soft/loose soil complete all as specified and directed. |
| 6 | M & L for cement concrete type D2 1:4:8 (40mm graded aggregates) in foundation filling and mass concrete complete all as specified and directed. |
| 7 | M & L for form works rough finished surfaces of concrete side of concrete foundation , footing , bases of coloumns raft and raft beams sides and sofits if any of foundation and plinth beams and similar work flat , vertical or to batter complete all as specified and directed. |
| 8 | M&L for form work to sides of pillar, posts, struts ,columns etc complete all as specified and directed. |
| 9 | M&L for form work to sides and soffits of beams lintel band and the like complete all as specified and directed. |
| 10 | S & F for MS TMT bars 10 mm dia and over , cut to length , bent to shape required incl cranking bending spirally for hooping for coloumn hooking ends and binding with and incl mild steel wire annealed not less than 0.9mm dia or securing with clips complete all as specified and directed. |
| 11 | S & F for MS TMT bars 5mm to 10 mm dia and over , cut to length , bent to shape required incl cranking bending spirally for hooping for coloumn hooking ends and binding with and incl mild steel wire annealed not less than 0.9mm dia or securing with clips complete all as specified and directed. |
| 12 | M & L for Reinforced cement concrete M-25 design mix (using 20 mm graded stone agg) as in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete in foundation, footings complete all as specified and directed. |
| 13 | M & L for Reinforced cement concrete M-25 design mix (using 20 mm graded stone agg) in columns, pillars, piers, posts and struts etc complete all as specified and directed. |
| 14 | M & L for Reinforced cement concrete M-25 design mix (using 20 mm graded stone agg) in beam cantilevers, bressummers, lintels over 1.5 m span etc complete all as specified and directed. |
| 15 | M & L for brick work using fly ash brick conforming to IS-12894:2002, Modular, class designation 7.5, straight or curved on plan, exc 6.0 m mean radius, built in CM (1:4) , complete all as specified and directed. |
| 16 | Providing & laying polymer, water proofing compound & fiber based ready mix plaster for rendering 15 mm thick in CM (1:4) on brick wall or concrete surfaces finished even & smooth without using extra cement complete all as specified and directed. |
| 17 | M & L preparation of new plaster surface and applying two coats of cement base paint over a coat of primer over newly plastered wall surfaces complete all as specified and directed. |
| 18 | S&F 110 mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors for fising to beep hole Etc complete all as specified and directed. |
| 19 | M&L Concrete bed to drain pipes including packing under,and haunching against the sides of pipes after they are laid and tested; cement concrete 1:3:6 type C-2 complete all as specified and directed. |
| 20 | S&F 300 mm dia reinforced concrete pipes, class NP2, laid and jointed complete with collars complete all as specified and directed. |
| 21 | S&F Framed work as in doors or gates of angle or other section with gusset plates, rails,braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering,running rails and guides) and hanging; also fastening and fixing complete Fe-290-Gde-E-165 complete all as specified and directed. |
| 22 | S&F in repair 2.50 mm dia of wire Galvanised. 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails strain- ing bolts, including, securing or tying at rossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed (each line wire to be measured) complete all as specified and directed. |
| 23 | S&F Concertina coil fencing with punched tape coil 450mm dia (at stretched position), made out of hot dipped, galvanised steel wire coated with CLR anti corrosive paint, making diamond shape barbs with 18 SWG sheet, spring core 2.5mm thick wire with tape 0.52mm thick and weight of each coil should not be less than 7.50 Kg, each coil should have 50 rounds and should covers 6 RM length, fixed over and including 6 lines of horizontal RBT (reinforced barbed tape) wire or razor wire at points wherever coil touches the bottom of wire with the help of hog rings (14 SWG) and in between Y shaped angle iron post complete all as specified and directed.NOTE: (i) Hogging shall be fixed at a interval of 600mm centre to centre, wherever it touches with the razor wire.(ii) Overlapping of concertina coil and razor wire shall be 300mm.(iii) Y shaped angle iron post shall be measured and paid separately under respective items.complete all as specified and directed. |
| 24 | M &L for preparation of steel surfaces of any description over 10cm in width or girth not otherwirse described and two coat of synthetic enamel paint over one coat of red oxide complete all as specified and directed. |
| 25 | Returning, filling in including spreading leveling, watering and well ramming in layers not exceeding 25cm in soft/loose soil as required complete all as specified and directed. |
| 26 | Removing excavated materials soil n.exc. 50mtr and depositing where directed at a level n.exc. 1.5 mtr above the starting point complete all as specified and directed. |
| 27 | Earth filling under floor filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm. complete all as specified.Note- Material obtained from excavation shall be reused. complete all as specified and directed. |
| 28 | M & L for angle posts and struts in fencing including cutting tops to shape as directed drilling holes notching for hole including necessary drilling bilting or rivetting complete or forged into spikes framed guards bars conforming to Fe-290 Gde E-165 complete all as specified and directed. |
| 29 | M & L for 15 mm thick rendering in CM 1:4 using WPC @ 2% by weight of cement on fair faces of brick wall or concrete surfaces finished fair and even incl Taking down cement plaster or cement lime plastering , any descriptuon from brick wall including racking out joints hacking for key scrubbing down with water etc complete all as specified and directed.(Note :- WPC shall be measured and paid seperatelly) complete all as specified and directed. |
| 30 | M & L for preparation of newly plastered surfaces of wall & applying two coats of cement base paint of approved shade/tint complete all as specified and directed. |
| 31 | Supply and fixing of 3mm dia GI wire chain link fencing with 75x75mm mesh size and fixed to any type of strandard rails straining bolts etc including provision of binding wire including dismantling fencing wiremesh any type complete all as specified and directed. |
| 32 | M & L for 15 mm thick rendering in CM 1:4 using WPC @ 2% by weight of cement on fair faces of new brick wall or concrete surfaces finished fair and even incl Taking down cement plaster or cement lime plastering , any descriptuon complete all as specified and directed.(Note :- WPC shall be measured and paid seperatelly) complete all as specified and directed. |
| 33 | M & L for preparation of new/old plastered surfaces of wall & applying two coats of cement base paint of approved shade/tint complete all as specified and directed. Total in Figures 0.0 0.0 INR Zero Only 4.0 Construction of chamber for 100mm sluice plates item5 10.0 Nos Quoted Rate in Figures 0.0 0.0 Zero Only Quoted Rate in Words INR Zero Only Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 17, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 07, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 10 daysNov 09, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 12 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender