Tender For Addition/Alteration To Certain Billets And Toilets Of Airmen Mess At Af Stn Bhuj.
Tender Value
43.74 Lakhs
Estimated cost
Bid Submission
06 Nov 2026
13 days left
EMD
87480
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Kachchh → Gujarat
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Addition/Alteration To Certain Billets And Toilets Of Airmen Mess At Af Stn Bhuj.
BOQ
| Sl. No. | Item Description |
| 1 | Taking down cement plaster on brick or stone walls etc including raking out joints hacking for key scrubbing down with water etc. |
| 2 | M&L for rendering 10mm thick in CM 1:6 mixed with water proofing compound on PCC block masonary surfaces finished even and smooth without using extra cement as specified. |
| 3 | M&L for applying 1-2mm thick wall care putty on new plaster surface of wall surfaces all as directed by Engr-in-Charge. |
| 4 | M&L for rendering on concrete surfaces 15mm thick in two layers first layer 10mm thick and 2nd layer 5mm thick in CM 1:4 with water proofing compound @3% by wt of cement, finished even and smooth without using extra cementNote: WPC will be measured and paid seprately |
| 5 | Supply only intergal water proofing compound |
| 6 | M&L for preparing new plastered wall surfaces and applying two coats of distemper with distemper oil emulsion white or tinted over and including chalk whiting, on plastered surfaces, preparatory to distempering complete all as specified and directed by EIC. |
| 7 | Material & Labour for preparing new plastered wall surface and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance,dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces including chalk whiting, on plastered surfaces, preparatory to distempering complete all as specified and directed by EIC |
| 8 | M&L for Complete removal of existing treatment on wall surfaces and applying two coat of distemper with distemper oil emulsion white or tinted over incl primer complete all as specified and as directed by Engr-in-Charge. |
| 9 | M&L for complete removal of existing treatment on wall surface and applying two coat of exterior emulsion paint over a coat of water base primer comlete all as specified and as directed. |
| 10 | M&L for Preparation of old steel painted surfaces of any description exc 10 cm width or girth and appying one coat of synthetic enamel paint, complete all as specified and as directed. |
| 11 | M&L for Preparation of new or previously untreated steel surfaces of any description exc 10 cm width or girth, include priming with red lead primer and appying two coat of synthetic enamel paint, complete all as specified and as directed. |
| 12 | M&L Preparing surfaces of new wood and wood based materials of any description and girth, not otherwise described and treated with two coats of synthetic enamel paint over a coat of pink primer. |
| 13 | M&L for preparation of old treated surfaces of wall including brooming down, scrapping down smoke soots etc. and appying two coat of white wash, complete all as specified and as directed. |
| 14 | Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises |
| 15 | M&L for 25 mm thick cement concrete type B-0, 1:2:4 using 12.5mm graded stone aggregate in sub base of floors etc. |
| 16 | M&L for non skid coloured ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.06sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over 15mm thick screed bed in CM 1:6 all as specified and directed. |
| 17 | M&L for Non - skid Ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over 15mm thick screed bed in CM 1:6 all as specified and directed. |
| 18 | M&L glazed ceramic coloured tiles in vertical surfaces such as in skirting and dados 350x250x7mm/450x350x7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over 10mm thick plaster in CM 1:4 all as specified and directed. |
| 19 | Taking down chowkhat or frames with shutter (without taking off shutters from the frames) n exc 1.5 sqm . |
| 20 | Taking down chowkhat or frames with shutter (without taking off shutters from the frames) exc 1.5 sqm but n.exc 4.00 sqm |
| 21 | S&F Pressed steel frames (Factory made) made out of 1.25 mm thick black MS sheet for doors, with one or more rebates including necessary fixing lugs, Butt hinges, lock strike plate, etc complete, size of frame 125x60mm incl bottom of each chowkat to be welded with 2 nos 25x25x3mm thick flat iron projecting 10 cm on either side and back fill to chowkats with PCC 1:2:4 type B-1 using 20 mm graded crushed stone aggregate complete all as specified. |
| 22 | S&F 35mm thick 2nd class hardwood factory made plain framed, panelled shutter (two panel) with lock rail and panel of 9mm B.W.P commercial ply or 12mm veneered particle board with commercial veneering on both faces , size of rail and stile as per IS:1003 (Part-I), Klin seasoned and chemically pressure treated all as per SSR complete all as directed. |
| 23 | S&F 35mm thick 2nd class hard wood Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass,etc.; sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats. |
| 24 | S&F Stainless steel wire cloth.0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples |
| 25 | S & F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing |
| 26 | S & F Factory made solid panel PVC door shutter S & F 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing. |
| 27 | M&L for aluminium window with double side hung shutter for glazing and gauging and frame with one or more rebates made out of anodised powder coated (minimum thickness of powder coated should not be less then 50 microns) aluminium section including section for fixing of aluminium grills with suitable fixtures, jointing cleats for fixing clips, rubber packing, anodised aluminium snap beading screws, anodised aluminium beading screws, type B20 100mm long suitable handle, 75mm long tower bolt and anodised aluminum fittings such as stay, 75mm long Butt hinges glazing with 5 mm thick tinted sheet glass fixed with Solar control film 25 micron reflective type (gareware sun control or equivalent) and gauging with aluminium wire cloth of size 0.45mm dia of wire and 1.40mm apertur except fixed glazing (FG) all as specified and directed. (Tint of glass shall be approved by GE)Note :-i) Aluminium grill fixed under above item shall be measured and paid separately.ii) Size of Aluminium Section for frame - 100x45x1.2mm.iii) Size of Aluminium Section for shutter - 85x45x1.2mmiv) Size of Aluminium wiremesh Shutter - 40x18x1.2mm |
| 28 | S&F anodized powder coated aluminium ventilator fixed type with frames aluminium section size 63X38X1.20mm thick including fly proofing ventilator fixing with standard rubber gasket locking arrangements aluminium beadings & joining cleats, suitable butt hinges, handle and tower bolts for fixing complete all as specified and 5.5 mm thick tinted glass with Solar control film 25 micron reflective type (gareware sun control or equivalent) complete all as specified and directed. |
| 29 | S&F powder coated anodized aluminium grill (diamond shape of approx size 100x100mm) made out of aluminium 'Y' section as approved by Engr-in-Charge for window/ ventilators etc complete all as specified and directed. |
| 30 | M&L in repairs for 18-20mm thick granite, Z black (table rubbed and polished) for platforms, wall lining (veneering to wall), cills and in similar items laid over and including 12mm thick in cement mortar (1:3) and pointing with white cement (1:2) using marble dust with admixutre of pigment to match with shade of granite external edges rounded. |
| 31 | Dismantling of wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation Boards/slabs/ blankets, any thickness, including cover fillets |
| 32 | M&L anodised aluminium snap grid size of grid 605mm x605mm frame work made out of 0.5mm thick GI tee 32x24mm for main, 25x44mm for cross tee and 20x20mm angle fixed on wall , powder coated finish on exposed faces of tee and angle , hung from ceiling using 2mm thick GI suspension wires spaced of 1200mm on main runners for false ceiling complete all as specified and directed by EIC. all as specified |
| 33 | M&L for gypsum ceiling board for ceiling prepainted , matt finish, 600x600x12mm in size with preparation of approved brand/ make, laid over, grid work ro fixed with nails to any type of frame work or with staples on snap grid incl making niches for fan/light on ceiling purposes. |
| 34 | Demolition of precast concrete block walling, Brickwork or stone/boulder masonary, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles built in cement morter complete all as specified. |
| 35 | M&L for PCC block masonary with precast cement concrete type 1:5:8 (20mm graded stone aggregate) solid blocks exc 10cm in width and setting in cement mortar 1:6. |
| 36 | Dismantling of Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings et as specified and directed. |
| 37 | S&F for Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified |
| 38 | S&F for Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified |
| 39 | Dismantling wrought iron or mild steel work of any description not otherwise provided as specified and directed. |
| 40 | S & F Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161 1979 grade St.-240 |
| 41 | S&F Fe-410 W(Gde E-250) qualityB, Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete all as specified and directed by Engr-in Chagre. Please Enable Macros to View BoQ information |
| 42 | S&F Fe-410 W(Gde E-250) qualityB, Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete all as specified and directed by Engr-in Chagre. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 17, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 06, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 13 daysNov 09, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 16 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender