Tender For D.I For Rising Main To Newly Constructed High Reservoir (Oht) In Front Of New Tehsil In Nagar Panchayat Kheragarh. (Ductile Iron) Pipeline (Total Length: 360 Meter) And H.D.P.E From High Reservoir (Oht) To Hakim Singhs House. (Hdpe) Pipeli
Tender Value
18.25 Lakhs
Estimated cost
Bid Submission
06 Nov 2026
9 days left
EMD
1.82 Lakhs
Bank guarantee accepted
Document Fee
4307
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Agra → Uttar Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for D.I For Rising Main To Newly Constructed High Reservoir (Oht) In Front Of New Tehsil In Nagar Panchayat Kheragarh. (Ductile Iron) Pipeline (Total Length: 360 Meter) And H.D.P.E From High Reservoir (Oht) To Hakim Singhs House. (Hdpe) Pipeline (Total Length: 250 Meter) Laying Work.
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling of following type of road surfaces for laying of pipe line and house connection work including sorting out of serviceable materials and disposal of unserviceable materials. |
| 2 | Cement concrete Road |
| 3 | Interlocking Tiles Road |
| 4 | Excavation for pipeline in ordinary soil (loam, clay, sand) with lift up to 1.5 m and lead up to 50 m and including filling back, watering and ramming of excavated earth into the trenches and removal and disposal of surplus earth within 50 meters.0 to 1.5 m depth |
| 5 | Supply of ISI mark DI K-9/K-7 S&S pipes (push on joints) of following class and diameters inclusive of jointing material (Rubber gasket of EPDM Quality, Bend, Tee etc.) including all statutory duties and taxes, third party inspection charges, transit insurance, freight,transportation to store/ site of work, unloading, stackingetc. complete as directed by Engineer –in-charge.150 mm nominal dia pipe(K-7) |
| 6 | Fabrication & making Specials for pipe line tee reducer & Small pieces of pipe to cut in required size in all complete. 10% of supply |
| 7 | Carting, lowering, laying and jointing with SBR ruber gaskets D.I. K-9/K-7 pipes of following dia & pressure including all specials, to site of work, lowering them into trenches, laying true to alignment and gradient, in proper position, cutting of pipes, making of joints including cost of jointing materials and rubber rings, labour, T&P, including hydraulic testing etc. complete as directed by Engineer in-charge.150 mm nominal dia pipe |
| 8 | Supply of High Density Polyethelene Pipes (HDPE (PN-6)/PE-100), conforming to IS 4984 / 14151 / 12786 / 13488 in coils/ standard lengths F.O.R. desination rates per meter (exclusive of GST) in Rs. every where in UP upto stores of consignees inclusive of third party inspection charges, packing and forwarding charges, transit insurance charges, road transportation chaloading & stacking the same etc. complete.160 mm (HDPE (PN-8)/PE-100) |
| 9 | Lowering, laying and jointing of HDPE pipe in proper position using electrofusion specials including supply of all Electrofusion specials & hydraulic testing as per relevent IS Code complete with all accessories like Electrofusion machine, power arrangements, hydraulic testing arrangements, labours, material etc. complete. 160 mm (HDPE (PN-8/PE-100) |
| 10 | Supply of following type of valves as per specifications F.O.R. desination rates per meter (exclusive of GST) in Rs. every where in UP upto stores of consignees inclusive of third party inspection charges, packing and forwarding charges, transit insurance charges, road transportation charges, unloading & stacking the same etc. complete. |
| 11 | 150 mm |
| 12 | 50mm dia Air valves as per IS 14845 : 2000 |
| 13 | Carting, lowering, laying, aligning, fixing in position and installation of following valves in pipe line including all material, labour, testing and commissioning as perdirection of Engineer-in- charge. |
| 14 | 150 mm dia |
| 15 | 50mm dia Air valves as per IS 14845 : 2000 |
| 16 | Supply of all materials, labour, T&P etc. required for construction of following masonry type chambers as per type design.Sluice valve Chamber- 100 mm to 250 mm |
| 17 | Air Valve Chamber - 50 mm |
| 18 | Provision for crossing of Nalas (0.5m to 2.0 m width) for laying of pipe line including necessary specials, T&P and arrangement of diversion of water, baricatings etc required, with dismantling of drains and reconstruction of same as per type design of the existing drain. |
| 19 | 1.0 - 1.5 m (Clear Span) |
| 20 | Disposal of surplus earth and other similar unserviceable, dismantled or waste material by mechanical transport including loading, transporting, unloading to approved municipal dumping ground for lead upto 10 km for all lifts, etc complete required for proper completion of the work. |
| 21 | Reinstatement of following type of road surfaces after laying of pipe line and house connection work including supply of all materials, T&P etc. required for proper completion of the work as per direction of engineer-in-charge. The quantity of reinstatement has been increased by thirty percent in the view of additional damaged of dismantled road due to traffic / vehicle movement. |
| 22 | Cement Concrete RoadConstruction of Cement Concrete road including supply of all materials, labour, T&P etc. required for proper completion of work as per following thickness:-PCC = 100 mm,1:3:6 (cement, coarse sand & stone ballast of 20-40 mm) CC =100 mm, 1:1.5 :3 (cement, coarse sand & stone ballast of 16-20 mm) |
| 23 | C.C. Interlocking Tiles Road Type AConstruction of C.C. Interlocking Tile road including supply of all materials, labour, T&P etc. required for proper completion of work as per following thickness:-PCC = 100 mm,1:4:8 (cement, coarse sand & stone ballast of 20-40 mm)Sand = 30mm to 50mm thick local sand lair for preparation of surfaceTiles = 50% new + 50% oldNote : 100 mm thick rubber moulded interlocking tile shall be used for construction of interlocking tile road. |
| 24 | P&F of Inauguration stone Board in all complete |
| 25 | Add 18% GST Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 17, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 06, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 9 daysNov 07, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 10 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender